PO Release status with date

Hi Guys,
I have a requirement where in I need to list out the POs with the Release status based on
date range. Any pointers on this is appreciated.
Thanks.
Rgds,
Senthil GR

hi
go to me2n then select the date range and then press shift+F4 (dynamic selection )here in header u can select the release indicator and dates
regards
kunal
award if helpful

Similar Messages

Digital Signature only Release Status with 3(Approver) Signer

Hello SDN Folks
I have done all the basic settings for Digital Signature which is sawn in following link
http://wiki.sdn.sap.com/wiki/display/PLM/Digitalsignaturein+DMS
it is work fine with 1 RE (Release) status and 1 Signer
We have in process to implement Digital Signature with only two Status
our scenario is
Document Creator Create Document With Status CR
Document Approver Approve Document With Status RE
now we have scenario that For 1 Document we have 3 Approver and 3 approver must digitally sign on DIR
our status is
only CR(create)---->RE(release)
so how i can attached 3 digital signer with only 1 RE(Release) Status
is it possible to go with 3 digital signer with only 1 RE (Release) Status ????
Regards
Tushar Dave

Hi Tushar,
Your requirement of utilizing 3 different approvers for a single 'Release' status in a document type/s can be addressed via the approach proposed below:
1.Define 3 individual authorization groups
2.Define 3 individual signatures
3.Define a common signature strategy
4.Assign the above 3 individual signatures to the common signature strategy
5.Define the signature sequence(the order in which the 3 approvers must approve)
6.Define users and restrictions(signature assigned to relevant approvers/users)
7.For the document type in question for the 'Release' status,assign the above signature strategy and test.
For more detailed information on using digital signature effectively,refer the below link
http://help.sap.com/saphelp_470/helpdata/en/9f/857f3a1c7b11d294d200a0c92f024a/frameset.htm
Regards,
Pradeepkumar Haragoldavar

Table for WBS status change with date

Hi,
Please assist me with a table name which should have WBS status with date on which statis was changed.
Thanks,
Manish.

Hi
You can use program (SE38) RBSVCDOC to track these changes. Else go manually in CJ20N to track these status changes.
Use JCDS and JEST table for any other reporting on it.
*Kindly mark your thread once your query is resolved.*
Regards
Saurabh

Include the Content Released status flag in default WC data control

Hi,
We have integrated custom webcenter portal application with UCM for documents integration. The integration was done using default data control.When we change the document which is getting displayed in the portal from UCM and check it into the system, wokflow gets triggered properly and the content status shows review status. But when we access the document in the portal, at that point of time new document is visible even though the content is still not released from the system.
Can anyone of you let me know how to include the released status of the content in the default data control so that we can avoid this situation
Regards,
Boopathy

First of all, I think this is more a question to WebCenter Portal, because it is how WebCenter Portal components are written.
Another thing is, that this is probably 'works as designed' and there might be good reasons for that. Since PS3, WebCenter (Portal) exposes some of UCM's functionality, among them ability to approve items in a workflow. This is the reason why it makes a good sense that items are available. Of course, they should be available only to approvers; also unapproved items should not appear if an item is displayed via Content Presenter (compare to a document published on a website via WCM). If you found such a behaviour, please, report it to MetaLink as it might be a bug.

Issue with status of data information in Bex analyzer report

Hi BI gurus,
One of the queries showing older date for the "status of data" information in the report of Bex Analyzer. I have tried to correct it in Bex analyzer by removing existing Text information element and adding a new Text element in the Bex Analyzer designer for the query. But it doesn't worked out as the changes made to the query through Bex Analyzer are only being saved as a local work book rather than reflecting to the query. Please suggest me with some options to resolve this issue and give any Idea to correct the "Status of data" in the Bex Query designer.

Hi Aditya
This is a common problem faced by users when reporting on Multi-Provider.
In my project what I did to overcome this is to run a Fake DTP to the cube whose status is creating problem.
Like , if under MultiPro I have a planning cube which is only updated monthly but all the actual cubes updated daily. In this case create a DTP under Plan cube with some impossible selection condition ( like fiscal year 2099). This will bring 0 records to planning cube ( and thereby not impacting the data) but will update the last loading time.
Regards
Anindya

Settlement of WBS with Partially Released status

Hi colleagues,
We are encountering problems during our settlement to AUC. Although the settlement rule is maintained, the system does not allow us to post the settlement to a WBS with "PREL" (partially released) status. Is this really the standard of the system? When can we release the WBS?
Thank you.

Ask your FICO consultants to create a separate Asset class for AUCs.
They can maintain such class in OAOA, where ask them to maintain status of Auc as Investment Measure.
Now you can use this class in OITA - Investment Profile.
And assign this Investment Profile to Project Profile in OPSA.
Assign this Profile to capital project.
Now all your assets which are AUC stage will come to this asset class.
You can create completed asset in the other class by full settlement.
Rewards for helpful answer.
Thanks,
RIYA

Condition Tables with Release status

When we create condition tables, we have the option of creating them with release status or without release status. What is the difference? What is release status?
Thanks,
Venkat

hi,
The release status for condition records in a sales deal enables you to limit the use of records that have already been created.
Release status has the following characteristics:
no entry: released
A: blocked
B: released for price simulation
C: released for price simulation and planning
The amount and significance of individual characteristics is defined using domain fixed values and can not be maintained.
Maintenance of the release status is carried out in the sales deal itself (in the proposed values block), is transferred over to the condition records concerned and can then not be changed for these records.
When setting up a new sales deal (with copy), a proposed value is suggested for the release status, which can be set up in Customizing for the agreement type.
A record blocked for an application is treated in the access, as though it has been identified with a deletion indicator. It can however be recognized and displayed as such via the log functionality in Pricing.
The characteristic Pricing Simulation is only used in the report SDNETPRO, which gives a net price list.
If when maintaining individual condition records a sales deal is assigned to the condition record using the transaction VK12, the release status from the sales deal is used for this record. When changing the release status using this sales deal or changes to the sales deal, the user will be notified of any changes to the status.
The release status of conditions in an agreement can only be changed, if
the condition record has release status in the key
the agreement has the release status released
Otherwise the condition record always has the release status of the agreement.
The processing status is always directly assigned to a release status. If conditions are assigned to an agreement, the agreement passes the release status on to all related conditions. The related processing status is then set accordingly.
If you have several processing statuses assigned to a release status, the condition record receives the first (alphabetical) suitable entry as a processing status.
The processing status, which the conditions have received indirectly from an agreement via the release status, can only be changed in the case of released agreements.
source : Library.
regards

Status of particular WBS, whether complete or not with Dates?

Dear All,
Can any one tell me , how to know what is status of particular WBS with Dates , and T code for download Stagewise WBS with cost

Hi Krishnan,
<li>check the field ELIKZ "Delivery Completed" Indicator in EKPO table, if ELIKZ field is space then P.O is open and not Billed.
Thanks
Venkat.O

Import Production orders with released status

We are using DTW to import production orders. It allows to import as "planned" status only and not as as "released status". We have hundreds of production orders per day and its a pain to update each production order to "released" status so that it can be available for reciepts from production and thereafter after recieving the items, changing each and every production order to "closed". Please advice

Hi Mohamed,
please use the following for the production order status in the template.
(1)Planned   :-> boposPlanned
(2)Released :-> boposReleased
(3)Closed    :-> boposClosed
(4)Cancelled :-> boposCancelled
Please refer to the SDK DI help file for the details information.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

Release Status of PR

Dear All,
How to check a PR is fully released ?
Thanks in advance.

Go to ME53, Select the Line item, and click the Flag Icon,
You will have Pop up of Release strategy.
Check release code of "release to date" against the release codes "Final release" they should be same,
Check the Release ID : RFQ/Purchase order is allowed or it comes as Block for Processing.
You can also check the PR Release status through Report MB5A, with required criteria of the check boxes.
Regards
Vikrant

BI_PROCESS_TRIGGER event job in released status ONLY

HI ALL,
I WANT TO TRIGGAR PC TWICE IN DAY 5 PM AND 2AM.
1.I CTEATED EVENT IN SM62 (ZSDPC_EVENT)
2.I CTEATED SE 38 PROGRAM (zsdpp_pc_event_program )LIKE BELOW
REPORT zsdpp_pc_event_program.
DATA: gv_time TYPE sy-uzeit,
      eventid TYPE btceventid.
gv_time = sy-uzeit.
eventid = 'ZSDPC_EVENT'.
IF ( gv_time GE '170000' AND gv_time LE '170000' )
   OR ( gv_time EQ '020000' AND gv_time LE '200000' ).
CALL METHOD cl_batch_event=>raise
    EXPORTING
      i_eventid                      = eventid
    EXCEPTIONS
      excpt_raise_failed             = 1
      excpt_server_accepts_no_events = 2
      excpt_raise_forbidden          = 3
      excpt_unknown_event            = 4
      excpt_no_authority             = 5
      OTHERS                         = 6.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
3.I SPECIFIED AFTER EVENT IN MANAIN VARIANT .ACTIVATED AND SCHEDULED PC
4. THEN RUNE THIS PRORGAM IN SM36
BUT MY PROBLEM IS IN SM37 JOB BI_PROCESS_TRIGGER event job in released status ONLY
please guide me if i am wrong .
REGARDS,
KP

It is supposed to be in Released status.
The BI_PROCESS_TRIGGER job is scheduled to run based upon the event being triggered (from your ABAP program). The only thing this job does is trigger the event that runs the next process in your process chain. If you set up the Start variant in your PC to schedule "After Event" and you set the periodic flag, then after the BI_PROCESS_TRIGGER job finishes, it will reschedule itself. So, there will always be a BI_PROCESS_TRIGGER job in a Released status.
Again, the BI_PROCESS_TRIGGER job does not run the entire chain. It only triggers the next processes in your chain.
Does this help?
PS. Are there any BI_PROCESS_TRIGGER jobs in a Complete status? If not, then there is an issue with your ABAP program.
Edited by: Geo on May 4, 2009 11:13 AM

Problem in Bex report Status of Data based on multiprovider

Hi Bi Expert,
I am facing probelm in my bex reprot having field "Status of data"
Report is based on multiprovider which using 3 cubes.
Out of this three cube report showing data with cube havnig oldest date data load.
How can I get latest one request data into my report .
I am not using bex web template so dont give solution related to it already gone through that thread.
using bw 3.5 version

Hi again,
in the table RSICCONT you find which request is in which data target. When you define the user exit variable on 0REQID, you have to go in this table and read the request with cubes names in your multi provider. In a second step you sort the request after cubes and time tamp and take the first n (depending on how many cubes you have in MP). Keep in mind: when you apply READ statement, read after Cube name
Regards
Aban

Problems with data migration from E-Business Suite 11i to OID.

Hi everyone i'm trying to migrate data between Oracle E-Business Suite Release 11i and Oracle Internet Directory.
I'm following the guidelines from the document: Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign On.
I have created a intermediate LDIF file that will converted to final LDIF file by ldifmigrator utility. But an error occurs when I try to disable a certain profile in the phase of converting the Intermediate LDIF file to final LDIF file. I am running the oidprovtool as cn=orcladmin and the syntax is as follows:
oidprovtool operation=disable \
ldap_host=portal10g.skyrr.is \
ldap_port=3060 \
ldap_user_dn=cn=oracleadm \
ldap_user_password=mypasswd \
application_dn="orclApplicatonCommonName=K95LSP,cn=EBusiness,cn=Products,cn=OracleContext,dc=skyrr,dc=is" \
profile_mode=BOTH
The command returns:
ERROR: Invalid directory credentials. Please check ldap_user_dn and ldap_user_password parameters.
I'm able to bind whith ldapbind and the syntax is as follows:
ldapbind -h portal10g.skyrr.is \
-p 3060
-D cn=orcladmin
-w ******
Can anyone help my to resolve the "Invalid directory credentials" error so that I can continue my Applications 11i migration.
I must admit that i'm new to Oracle Internet Directory and all advices and pointers are highly appreciated.
Regards,
Sammi

Hello,
As Scott says, the fact that you're using HTTPS rather than HTTP is pretty much transparent to the mod_plsql handler (well in the respect that you don't really need to do anything 'special' in your application I mean).
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

PO Release status with date

Similar Messages

Maybe you are looking for