PO return with TD shipment

Dear gurus,
I have a problem with return PO.
- First I create return PO with return flag checked.
- Then create Outbound delivery (Vl10D).
- After that I create TD shipment (O4F1), assign Outbound delivery and make
Loading confirmation (O4G1).
- But when I make Delivery confirmation (O4H1), system reports error:
"Goods movement not possible with mvmt type 161".
Please help me to solve this!
Thanks in advance!!!

Dear Ranganath,
Thank you so much for your useful advice. Appreciated very much. This is my first time to award you with points. Hopefully, I've allocated the point correctly to you as I'm not too sure how to assign the point. What I've done was just clicked on the optional button to choose the point only.
Many thanks to you.
Regards,
Edwin.

Similar Messages

  • How can i make a soft return with pages shift enter does not work!

    how can i make a soft return with pages shift plus enter does not work!!

    On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

  • How to Import an Order via Order Import with multiple shipment lines?

    Good Morning,
    I have a question concerning Oracle's order import functionality. We are importing orders from an outside system and need to consolidate orders by customer id. So if the same customer places 2 orders for different items on the outside system, they should interface to Oracle as a single order to that customer with a shipment line for each ordered item (ex 1.1, 2.1..).
    I know this can be done, but do not know how to implement the solution.
    Can someone please help?
    Thank you!!
    Edited by: user11984882 on Jun 22, 2011 7:03 AM

    Hi,
    I guess that this zip-file contains a transport. This transportfiles have to be copied in the /usr/trans/data und /usr/trans/cofiles and imported by the transaction STMS.
    Thomas Jung wrote how to do this in this: How to import examples from book "Advanced BSP Programming"
    Perhaps your basis administrator can help you to do this?
    Regards,
    Stefan

  • TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

    Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

    Hotmail is having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • Credit memo for returns with multiple reference deliveries

    Hi Experts,
    I have few credit memos for returns with multilple return orders and return deliveries in document flow.
    I want to find out where do we configure this setting in which there will be single credit memo for multiple deliveries.
    And how system decides the common factors in deliveries for this credit memo?
    Please guide.
    -Chetan Barokar.

    Hi,
    In copy control settings of delivery document to billing document you can maintained the requirement routine Data VBRK/VBRP as 03 - Single invoice for an item category, as theinvoice spliting will be control from copy control.
    with regards
    Vivek.

  • Blue Screen Crash - returning with magnified screen

    Somethings up with my G5 PowerPc. Its been working well for ages - but now suddenly it crashes unexpectably [often when using Safari or photoshop]. The curser stops moving, the screen goes blue for about 10 seconds - returns highly magnified - and then stops again, turns blue for a second time and then returns with the original magnification. What's going on ? It can do it again and again and again - and then not for a bit ?
    Could it have anything to do with the fact the Mac also keeps looking for a bluetooth mouse - which I don't use as I am a wcom pen user?
    Is it dying??
    Thanks
    timbo656

    Hi timbo656, and a warm welcome to the forums!
    Have you blown the dust out of it lately?
    Get Temperature Monitor - 4.51 to see if it's heat related...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19994
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.
    Boot off your original G5 Install Disk while holding down Option/alt key to select AHT, then run the extended Apple Hardware Test. Some models have a separate AHT CD.

  • Free of goods returns with out main item

    Hi.. All
    Free goods returns with out Main item
    created sale order with Shoes 5 Pair qnty
    and free of goods are  pair Soxs are 3
    Now one pair Damaged now i want to send returns only For Free of goods Here no main item

    """"No seller is creating  billing with free of goods with main items
    now i am going to create Return order main item is coming as well as Free of goods items also coming to RO
    Now i want to return only free of goods only one pair
    i cant delete main item Right""""
    Have you tested this? what was the problem in  deleting the item??
    Have you activated the complete reference in your VTAA controls??
    Phanikumar

  • Return with credit only approval

    Hi,
    I have customized the workflow Order Flow - Return with Approval, for few orders which are credit only and must be approved in approval notification.
    For these order no notification came and now they are in booked status and no credit memo is created, what should I do to so the notification should come again ?
    The workflow is completed , weather I should re run workflow?
    thanks,
    /Zubair

    Hi John,
    For the user who has created the RMA, what are his profile option settings at site, responsibility and user level for the profile option OM: Notification Approver?
    I assume you have already checked this but it's worth checking that the notification is being routed to whom you expect it to be routed !
    Regards,
    Jon

  • Sales returns with free goods

    Hi All,
    We are trying create sales returns with Invoice. But system is not copying the free goods item. I have checked relevant item category determination and Copy controls, everything is looking fine for me.
    Please let know if any other settings are required.
    I am getting below meeage.
    Item category for item 000021 cannot be determined
    Item 000021 is not copied from the refer
    document.
    Thanks.

    Hi radha
    Say you have created a creditmemo with G2 document type and you are getting a item category of G2N , so check the item category TANN is available or not with G2 doctype and item category G2N  in VOV4 .Check in copy control wheather the item category is available or not in VTLA  . I suppose it is not there that is the reason you were getting error.
    Maintain item category data at copy control VTLA then your problem will be solved
    Regards
    Srinath

  • Inclusive Free Goods Return with Reference

    Hi Gurus!
    Could you help me with my question below
    We are tring to create a sales order return with reference to a billing document. This billing document has two items where one is a standard item and the other is a inclusive free goods item.
    Example:
    1            AAA

    Hi
    When you have creating the sales order  with reference to billing document the items will be copied into the return order without any changes
    You can check the controls in the copy control VTAF
    Regards
    Damu

  • Carriage Return with the text in xdofx

    Hi
    I have to insert a carriage return with in a text I tried <?xdoxslt:chr(10)?>
    e.g <?xdofx:if x>'0' then 'Approved. Thank you.' else 'Disapprov.Thank you. ' end if?>
    so the output should be
    Approved
    Thank You
    I need carriage return between Approved and Thank You
    Thanks

    Use this:
    <?xdoxslt:ifelse(x>0, concat('Approved', xdoxslt:chr(10), 'Thank you.'), concat('Disapprov. ', xdoxslt:chr(10), 'Thank You.'))?>
    I tried this and it works
    <?xdoxslt:ifelse(10>9, concat('Approved', xdoxslt:chr(10), 'Thank you.'), concat('Disapprov. ', xdoxslt:chr(10), 'Thank You.'))?>
    Thanks,
    Bipuser

  • ORDERS05 - Create a Return with reference to a Sales Order

    Hi all,
    I'm trying to create a return with reference to a sales order via IDOC ORDERS05. I'm indicating referenced Sales Order number into segment E1EDK02; indicating qualifier (QUALFR = 002) and Sales order number (BELNR). By this way, I create a Customer Return but without reference.
    Which fields or segment have to be filled in order to create it correctly?
    Thanks
    Marí

    Correct...
    You need something like:
    *Get the pricing cond number.
    select single knumv from vbak into cond
      where vbeln = '0000080347'.
    if sy-subrc = 0.
    Get the pricing record which are by line item.
      select * from konv into table konv_tbl where knumv = cond.
    Loop thru them one line at a time.
      loop at konv_tbl.
       bapi_cond-itm_number = '000010'.
        bapi_cond-cond_st_no = konv_tbl-stunr.
        bapi_cond-cond_count = konv_tbl-zaehk.
    CALL FUNCTION 'BAPI_CUSTOMERRETURN_CREATE'
      EXPORTING
        RETURN_HEADER_IN               = bapi_hdr
       BUSINESS_OBJECT               = 'BUS2102'
        CONVERT                        = 'X'
      IMPORTING
        SALESDOCUMENT                 = bapi_salesdoc
       RETURN                        = BAPI_RET
      TABLES
        RETURN                        = bapi_ret_tbl
        RETURN_ITEMS_IN                = bapi_itm
        RETURN_ITEMS_INX               = bapi_itm_out
        RETURN_PARTNERS                = bapi_prtnr
        RETURN_SCHEDULES_IN            = bapi_schd_lin
        RETURN_CONDITIONS_IN           = bapi_cond.  "pricing
      ORDER_TEXT                    = bapi_text.

  • Customer Returns with Excise Duties.

    Hi all,
    Can any one explain the steps for Customer Returns with Excise Duties.
    I have sold the Material to customer from Manufacturing Plat to customer.
    Sales Orderm - VA01
    Outbound delivery- VL01N
    Pro forma -  JEX
    Excise Invoice - J1IIN
    Invoice - VF01
    Now customer wants to return the goods with the same Excise Invoice issued from Plant.
    Return Order - VA01
    Inbound Delivery - VL01N
    Now what are the steps to capture the Excise Details..........?
    We are using one more transaction (=/BEV1/SR0) here to keep the goods in to Unrestricted or Blocked stock and it will create Credit memo request automatically.
    so please guide me is this step need to be done before Excise details are captured ?
    It is very urgent to me. please send me the steps for the above mentioned scenario.
    Thanking you.
    Regards
    Jaya

    hi
    create return order in VA01 with order type RE with reference to billing (assign order reason)
    create delivery in VL01N and do PGR
    go to VA02 and remove billing block
    create billing document in VF01 with reference to return order.
    DO EXCISE JV MAIN MENU IN T.CODE J1IH
    SELECT ADDITIONAL EXCISE TAB
    ENTER DELIVERY DOCUMENT NUMBER
    SELECT DETAILS ICON IN THE EXTREEM LEFT OF THE APPLICATION TOOL BAR
    ENTER MATERIAL NUMBER, QUANTITY AND EXCISE DUTY
    SELECT DETERMINE G/L ACCOUNTS AND PRESS CONTINUE AND SAVE IT
    EXTRACT RG23APART2 IN J2I5
    IN PRINT RG23APART2 U CAN C THE OUTPUT
    NOTE MAINTAIN NUMBER RANGES FOR RG23APART2.

  • PO return with freight reclaim from supplier

    Dear gurus,
    I intend to create a PO return with the freight charges agreed to
    refund by the vendor. I've set the indicator for return in PO and
    it works perfectly but how do I add in additional freight
    charges condition type with the proper value (to indicate the amount for refund from the vendor)? E.g. My PO item
    return value is $100 and the cost for freight is $10. The system
    will show me $90 as net value instead of $110. Is there anyone
    out there has experienced the similar case? Alternatively, shall
    I split out the claim in another PO line item or shall I handle
    it separately by waiting for the credit note from the vendor (which will be handled by the FI). What is
    the best practice? What happen if my end user wanted to show the freight charges to be captured in the PO return. How could I do that in PO return?
    Appreciate for your help as it is very urgent.
    Thank you.
    Regards,
    Edwin Fu

    Dear Ranganath,
    Thank you so much for your useful advice. Appreciated very much. This is my first time to award you with points. Hopefully, I've allocated the point correctly to you as I'm not too sure how to assign the point. What I've done was just clicked on the optional button to choose the point only.
    Many thanks to you.
    Regards,
    Edwin.

  • I I made a PDF fie to preview, but am still apprehensive to actually order the book, as I have ordered some prints of photos after I thought i had them cropped correctly and prints returned with heads, half of bodies have a book formatted and ready to buy

    I have formatted a photo book, but am apprehensive to push the "buy" button as I have ordered prints that I thought were cropped correctly, and they returned with heads cut off and half of bodies mising.  I have put the book on a PDF file as instucted, please reassure me that if everything looks right there, that is the way the book will look??

    If the PDF looks good then the printed copy should be OK.  The only problem you might run into is the color rendering.  As long as none of your photos use the sRGB profile and not the Adobe RGB color profile the color should be fine.
    On those prints that were cropped incorrectly: did you copy them to the print size ordered before uploading for printing? If not then they will be cropped by the printing equipment and you'll lose part of the top and bottom of the print (for landscape prints).
    OT

Maybe you are looking for