PO through Collective or RFQ no.

Dear All
I have made Comparision through ME57 t-code in SAP and i want to create the PO from that no.(RFQ) but i didnot get the PR no. in the requistion tab, so it does not give any error message if i will make several PO against the same RFQ with full qty.
regds
devesh

dear
but it should be upto the PR qty is pending right....
see... when i create the PO through RFQ no. it should also bring the PR no. in the PO but it didn't bring ... it s okay...no problem i saved the po without the PR no. ok
now i make another po with same rfq no. it should give error message during the save but it didn't give. it means i can create as many po as i can with the rfq or some error in configure.... pls check and revert
regds
devesh

Similar Messages

Looping through Collection

Hello I need to loop through the collection to process 500 records at a time from the resultset.
how do i do this?
I have created another variable of same type as resultset output variable type. but not sure how to assign nodes 1 to 1000 to the new variable.

Hi,
You can loop over your collection with a while loop. The following is from the bpel samples directory (112.Arrays) adapted to your needs. Define the variables:
<variable name="iterator" type="xsd:integer"/>
<variable name="count" type="xsd:integer"/>
<variable name="xpath" type="xsd:string"/>
Set the initial values:
<assign name="SetInitialValues">
<copy>
<from expression="1"/>
<to variable="iterator"/>
</copy>
<copy>
<from expression="ora:countNodes('input', 'payload','/tns:collection/tns:item')"/>
<to variable="count"/>
</copy>
</assign>
Make a while loop:
<while condition=" bpws:getVariableData('count') >= bpws:getVariableData('iterator')">
<sequence>
<assign name="setAttribute">
<copy>
<from expression="concat('/tns:collection/tns:item[',bpws:getVariableData('iterator'),']/tns:value')"/>
<to variable="xpath"/>
</copy>
<copy>
<from expression="bpws:getVariableData('input','payload',bpws:getVariableData('xpath'))/>
<to variable="output" part="payload" query="/tns:recordVariable/tns:value"/>
</copy>

<copy>
<from expression="bpws:getVariableData('iterator') + 1"/>
<to variable="iterator"/>
</copy>
</assign>
</sequence>
</while>
So the trick is to dynamically build an xpath expression based on the while loop counter.
Kind Regards,
Andre

Looping through Collection and getting ConcurrentModificationException

I'm trying to loop through a collection to delete some objects referenced by that collection but keep coming up against a ConcurrentModificationException.
BwView view = svci.getViewsHandler().find("Lists");
              Collection<BwSubscription> subarr = new TreeSet<BwSubscription>();
              subarr = svci.getSubscriptionsHandler().getAll();
              if (subarr == null) {
                   logger.info("Its not working");
              for (BwSubscription sub: subarr) {
                   logger.info("Removing subs " + sub);
                   svci.beginTransaction();
                   svci.getSubscriptionsHandler().delete(sub);
                   logger.info("Deleting calendars :" + sub);
                   svci.endTransaction();
             The loop is allowing me to delete the first entry but then fails with the exception.
I have tried with a generic loop but this doesn't initialise the sub entity so the loop fails and is ignored leading to problems later in the code.
BwView view = svci.getViewsHandler().find("Lists");
              BwSubscription[] subarr = (BwSubscription[])view.getSubscriptions().toArray(new BwSubscription []{});
              if (subarr == null) {
                   logger.info("Its not working");
              for (int i=subarr.length - 1; i>=0; i--) {
                   sub = subarr;
               logger.info("Removing subs " + sub);
               svci.beginTransaction();
               svci.getSubscriptionsHandler().delete(sub);
               logger.info("Deleting calendars :" + sub);
               svci.endTransaction();
Sub is either not initialised or gets initialised as 0 causing an ArrayIndexOutofBoundsException. I'd be grateful for some advice on getting the code to loop correctly.

While iterating over a collection (using its iterator), a ConcurrentModificationException will be thrown if the collection is modified, except if it is modified using the iterator itself.. The enhanched for-loop you're using is iterating over the collection by implicitly using an Iterator. To do what you want, make the Iterator explicit (change the enhanced for-loop to a while loop) and then use iterator.remove().

Looping through collection of symbols and populating a drop down on a form EXTENDSCRIPT

Hello everyone-
I got a question. Would it be possible to run a script that would loop through a collection of symbols in a defined library and populate a drop down with the available symbols. My goal is to be able to open Illustrator, and when I run the script the dropdown is populated with all available symbols(text is fine) in a defined library that I can then select and place on the artboard. Any help would be appreciated.
thanks in advance!

So...
Dim appref As New Illustrator.Application
Dim docRef As Illustrator.Document                                                                         'The work document
Dim docToAdd As Illustrator.Document                                                                   'The document which contain the symbol's library
Dim pathArt As Object
Dim ItemSymbol As Object
Dim itemSymbolref As Illustrator.Symbol
Dim artObject As Variant
appref.Open ("C:\..... workDoc.ai")
Set docRef = appref.ActiveDocument                                                                         'Assign docRef to your work document
appref.Open ("C:\......symbolDoc.ai")
Set docToAdd = appref.ActiveDocument                                                                    'Assign docToAdd to your symbol document
Set symbolref = appref.ActiveDocument.Symbols(Symbol_Name)                               'Assign symbol ref the symbol you're looking for
Set itemref = appref.ActiveDocument.SymbolItems.Add(symbolref)                              'Copy it on the current active page
itemref.Selected = True                                                                                              'select it
docToAdd.Copy                                                                                                         'add it to your clibboard
docToAdd.close (aiDoNotSaveChanges)                                                                     'Close the library, without changing anything
appref.ActiveDocument.Paste                                                                                     'Paste the clipboard on your work document
                         'As soon as you paste the symbol, it will be added in the document symbol library
Clipboard_Clear                                                                                                         'See below why...
SelectedObjects =appref.ActiveDocuments.selection                                                   ' Select the symbol you past
                         ' The loop is not necessary if you have only one thing selected
For Each artObject In selectedObjects
    artObject.Delete
Next
                         ' Cleanup your pointers
Set artObject = Nothing
Set pathArt = Nothing
Set docToAdd = Nothing
[....] Continue your script on your working document
Set docRef = Nothing               'after closing your working doc...
Remark on clipboard_clear : If you don't do it, the risk is to accumulate plenty other things you don't want...
Public Function ClipBoard_Clear()
Call OpenClipboard(0&)
Call EmptyClipboard
Call CloseClipboard
End Function
With
Public Declare PtrSafe Function OpenClipboard Lib "user32" (ByVal hWnd As Long) As Long
Public Declare PtrSafe Function CloseClipboard Lib "user32" () As Long
Public Declare PtrSafe Function EmptyClipboard Lib "user32" () As Long
be careful I use the PtrSafe pointer due to the fact I'm working in x64 architecture
in x86 it will be
Public Declare Function OpenClipboard Lib "user32" (ByVal hWnd As Long) As Long
Public Declare Function CloseClipboard Lib "user32" () As Long
Public Declare Function EmptyClipboard Lib "user32" () As Long
Regards to all
Michel

No confirmation through Collective Confirmation CO12

Hi
We are having setup 0010 and 0020 operation, at 0010 PRT is attached with usage value calculation.
While confirming through CO12 transaction. and putting all operation together There is no confirmation is executed. We get the message "No confirmation Executed" and the message no is RU514.
We are working ECC 6.0
Can any one help

Pl check whether order is released or not ? Or if there is an costing error in confirmation , it will not post the confirmation. Pl send me the details of the error message.
Thanks

I just found out my credit score dropped because Verizon One bill put me through collections for my final bill that I never received and after almost two hours on the phone transferred back and forth they still could not confirm if I owe money or not.

After 2 hours transferred back and forth between billing, one bill, home and wireless no one could prove that I owed money. Wireless said I owed nothing and home said I had a credit for cancelling a couple days before the billing cycle but owed for wireless. After a three-way called between Home and Wireless and Wireless insisting I do not owe anything, the Home representative disconnected herself, the wireless rep promised me a call back the next day to get the other department online and to get everything resolved. No one called me back next day and the day after. Knowing this could go in circles and don't want to do anything bad to my credit, I paid the settlement amount to the collection agencies. Now I saw that my credit score got ding for an amount that Verizon couldn't prove that I owed. I should not have paid it at all. If someone from Verizon reads this message, please get back to me and get this resolved. After more than 15 years with this company, this is making me so frustrated. I liked Verizon services but at this point I am going to start looking for someone with better billing.

I called customer service, spoke to Verizon Wireless Representative but they cannot pull anything on my record. So after two transfers I asked to speak to financial services. Spoke to Ronnie Ext 5100. Representative was very rude, not listening, kept on insisting that since I paid the collection agency I cannot dispute. Said should not have paid the collection agency. Rep was over talking, not listing to me explaining my frustration of being on the phone for hours in November between Verizon OneBill, Home and Wireless and got nothing resolved, and that's why I paid. Said there's nothing she can do except to put a note to Credit Bureau that the account is paid in full. I asked to talk to a supervisor or a manager and she said no one can do anything else. I insisted and she asked me to leave a phone number to call back. After all the calls and speaking to many reps, this is the worst. Now I am back to square one waiting for someone to call me back. And my credit score is still one hundred points lower thanks to Verizon!!!

What is difference between Iterator and Collection Wrapper?

Hi all,
I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator??
Thanks,
Chinnu.

L_Kiryl is right.
Collections support global iteration (through collection->get_next( )) and local iteration (through iterator->get_next( )).
Each collection has a focus object. Initially, the first object has the focus.
Any global iteration moves the focus, which is published by the event FOCUS_CHANGED of the collection.
If you want to iterate on the collection without moving the focus (and without triggering timeconsuming follow-up processes) you can use local iteration. To do so, request an iterator object from the collection and use this to iterate.
And one more advantage of using iterator: it takes care of deleted entities. If you use global iteration then when you reach deleted entity it will be an exception. But there is no exception with iterator in the same situation.

How to crate a dynamic size array, collection

Hi,
Can someone point me to some tutorial on how to create a dynamic size array. Actually I have multiple cursors and on different tables and want to loop through each cursor and get some values from each cursor and put it in an array. But don't know how to create or initialize an array as I don't know the size. Is there any other way.
Here is what I am doing I have 6 cursors on different tables, I loop through each cursor and get some specific data that I need to place at one place after looping through all the cursors which then finally needs to be inserted in one table. But before the insert I need to validate each data so want to have all the data in some array or some other place for temporary storage from it's easier to do the validate and insert rather than while looping through the cursors as there may be duplicates which I am trying to remove.
As this procedure will be called multiple times so wanted to save the cursor data in temporary array before inserting in the final table. Looking for some faster and efficient way.
Any help is appreciated.
Thanks

guest0012 wrote:
All the 6 cursors are independent and no relation i.e. can have a join and have one sql as no relationship in tables.If there is no relation, then what are your code doing combining unrelated rows into the same GTT/array?
Now using GTT when I do an insert how do I make sure the same data doesnot already exists. i.e. GTT will only have one column. Then create a unique index or primary key for the GTT and use that to enforce uniqueness.
So everytime I iterate over a cursor I have to insert into GTT and then finally again have to iterate over GTT and then do an insert in the final table which maybe a performance issue Which is why using SQL will be faster and more scalable - and if PL/SQL code/logic can be used to glue these "no relationship" tables together, why can't that not be done in SQL?
that's why i was wondering if can use any kind of array or collection as it will be a collection of numbersAnd that will reside in expensive PGA memory. Which means a limit on the size of the collection/array you can safely create without impacting server performance, or even cause a server crash by exhausting all virtual memory and causing swap space to trash.
and finally will just iterate ovr array and use FOR ALL for insert but don't know what will be the size of the array as I only know after looping the cursors the total number of records to be stored. So wondering if how to do it through collection/array is there a way to intialize the array and keep populating it with the data with defining the size before hand.You cannot append the bulk collect of one cursor into the collection used for bulk collecting another cursor.
Collections are automatically sized to the number of rows fetched. If you want to manually size collection, the Extend() method needs to be used, where the method's argument specifies the number of cells/locations to add to the collection.
From what you describe about the issue you have - collections are not the correct choice. If you are going to put the different tables's data into the same collection, then you can also combine those tables's data using a single SQL projection (via a UNION for example).
And doing the data crunching side in SQL is always superior in scalability and performance, than doing it in PL/SQL.

SharePoint 2010 designer workflow assoicated tasklist not showing columns added by collect data

Hi,
We had a SharePoint designer workflow in production. This is a reusable workflow, and this workflow uses collect data action to get some of data from users. Through collect data action, we added 7 columns(default task list), which have been used in logging,
email template and other places in the rest of the workflow.
Suddenly we find all the references to task columns(added through collect data), are not showing up in the workflow. If we try to add those collect data columns, it is not showing in "Field from Source" field as shown below.
Here Association Tasklist field are not showing.
If we again try to select columns, we find that all the columns that we added through collect data
no longer visible in associated task list.
Please help.

Hi Fender,
Please can you confirm which version of Outlook your users have (and if they are all on the same version)? All my none 2007 users lack the Edit Item button, and have to use the links in the body of the email, which I believe is simply due to the fact that
2003 et al lacks the same SharePoint integration options as 2007.
Cheers
Stew

Updating a table from a collection

I have some data in a collection that is meant to update a table
I have a string of colon delimited column names like
pk:age:height:weight
The table contains the PK and the data for column names as per the string above.
So,
c001=pk
c002=age
c003=height
c004=weight
How can I loop thru the table and create/execute a UPDATE statement that updates
those columns in a pre-specified table?
Of course using bind variables as much as possible?
Thanks

thought you may do it easier by loop through collection in a process as ...
for c in (select c001 pk, c002 age, c003 height, c004 weight
from yur_collectioin
where c.pk = c001) loop
update yur_tbl set age = c.age ....
where pk = c.pk
end loop;
Or you may "loop thru the table" and update in a process as ...
for c in (select * from tbl) loop
for cc in (select c001 pk, c002 age, c003 height, c004 weight
from yur_collectioin
where c.pk = cc.pk) loop
update tbl set age = cc.age ....
where pk = cc.pk
end loop;
end loop;
Should not have mutation problem but I am not sure. Good luck.
DC

Reading from .CSV and storing it into a collection

Hi folks,
Is there a way to make a dynamic procedure to work with .CSV documents and store it into a collection? For example you have to make a procedure to read from .CSV but users upload 10 different version that have different number of columns.
Normally I would define a record type to match those columns and store it into a collection. However if I don't know the number of columns I would need to define 10 records in advance which I am trying to avoid.
Problem is I cant define SQL elements on the fly. Meaning on production I don't have the rights to dynamically create a table to match my columns and then drop the table after I no longer need it so I need to store data into a collection.
And the last option where I would loop through the document and then do the operations I need is not good since the document is a part of other procedures that write and read from it. The idea is to pick the data, store it into a collection, close the file and then work with it.
This is what I got so far:
declare
-- Variables
l_file      utl_file.file_type;
l_line      varchar2(10000);
l_string    varchar2(32000);
l_delimiter varchar2(10);
-- Types
type r_kolona is record(
    column_1 varchar2(500)
   ,column_2 varchar2(500)
   ,column_3 varchar2(500)
   ,column_4 varchar2(500)
   ,column_5 varchar2(500));
type t_column_table is table of r_kolona;
t_column    t_column_table := t_column_table();
begin
/*Define the delimiter*/
l_delimiter := ';';
/*Open file*/
l_file      := utl_file.fopen( 'some dir', 'some.csv', 'R');
/*Takes first row of document as header*/
utl_file.get_line( l_file, l_line);
loop
    begin
      utl_file.get_line( l_file, l_line);
      /*Delete newline operator*/
      l_string                         := rtrim( l_line, chr(13)) || l_delimiter;
      /*Extend array and insert parsed values */
      t_column.extend;
      t_column(t_column.last).column_1 := substr( l_string, 1, instr( l_string, l_delimiter, 1, 1) - 1);
      t_column(t_column.last).column_2 := substr( l_string, instr( l_string, l_delimiter, 1, 1) + 1, instr( l_string, l_delimiter, 1, 2) - instr( l_string, l_delimiter, 1, 1) - 1);
      t_column(t_column.last).column_3 := substr( l_string, instr( l_string, l_delimiter, 1, 2) + 1, instr( l_string, l_delimiter, 1, 3) - instr( l_string, l_delimiter, 1, 2) - 1);
      t_column(t_column.last).column_4 := substr( l_string, instr( l_string, l_delimiter, 1, 3) + 1, instr( l_string, l_delimiter, 1, 4) - instr( l_string, l_delimiter, 1, 3) - 1);
      t_column(t_column.last).column_5 := substr( l_string, instr( l_string, l_delimiter, 1, 4) + 1, instr( l_string, l_delimiter, 1, 5) - instr( l_string, l_delimiter, 1, 4) - 1);
    exception
      when no_data_found then
        exit;
    end;
end loop;
/*Close file*/
utl_file.fclose(l_file);
/*Loop through collection elements*/
for i in t_column.first .. t_column.last
loop
    dbms_output.put_line(
         t_column(i).column_1
      || ' '
      || t_column(i).column_2
      || ' '
      || t_column(i).column_3
      || ' '
      || t_column(i).column_4
      || ' '
      || t_column(i).column_5);
end loop;
exception
when others then
    utl_file.fclose(l_file);
end; Stupid version would be to define a record with 50 elements and hope they dont nuke the excel with more columns :)
Best regards,
Igor

Igor S. wrote:
Use some to query data and then fix wrong entries on prod (insert, update, delete). Manipulate with some and then make new reports. The first that come to mind but basicly is to write a procedure that can be used for ANY .csv so I dont have to rewrite the code.This is logically wrong and smacks of poor design.
You're wanting to take CSV files with various unknown formats of data, read that data into some generic structure, and then somehow magically be able to process the unknown data to be able to "fix wrong entries". If everything is unknown... how will you know what needs fixing?
Good design of any system stipulates the structures that are acceptable, and if that means you know there are just 20 possible CSV formats and you can implement a mechanism to determine which format a particular CSV is in (perhaps something in the filename?) then you will create 20 known targets (record structures/tables or whatever) to receive that data into, using 20 external tables, or procedure or whatever is necessary.
Doing anything other than that is poor design, leaves the code open to breaking, is non-scalable, hard to debug, and just wrong on so many levels. This isn't how software is engineered.
For example you have 20 developers that have to work with .CSV files. So when someone has to work with a .CSV he would call a procedure with parameters directory and file name. And as a out parameter would get a collection with .CSV stored inside.As others have mentioned, give the developers an Apex application for their data entry/manipulation, working directly on the database with known structures and validation so they can't create "wrong" data in the first place. They can then export that as .CSV data for other purposes if really required.

DML and collections

Hi,
How can modify a PL/SQL Table, Nested Table or VArray (using DML) that is not stored in the Database? Example: accept a collection as a "In Out parameter" in a function and manipulate this collection using DML.
Anybody have a full example to solve this situation?
Thank's

UPDATE, DELETE etc. are not supported in this way.
Three alternative approaches spring to mind.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> CREATE TYPE t_rec AS OBJECT (
2 a NUMBER,
3 b NUMBER);
4 /
Type created.
SQL> CREATE TYPE table_rec AS TABLE OF t_rec;
2 /
Type created.
SQL> SET SERVEROUTPUT ON;
1. Use PL/SQL loop to loop through collection setting values.
SQL> DECLARE
2 my_pltable table_rec :=
3 table_rec (t_rec (1, 2), t_rec (1, 2));
4 BEGIN
5 DBMS_OUTPUT.PUT_LINE ('old value: ' || my_pltable (1).a);
6
7 FOR i IN my_pltable.FIRST .. my_pltable.LAST LOOP
8 my_pltable (i).a := my_pltable (i).a + 1;
9 END LOOP;
10
11 DBMS_OUTPUT.PUT_LINE ('new value: ' || my_pltable (1).a);
12 END;
13 /
old value: 1
new value: 2
PL/SQL procedure successfully completed.
2. Use CAST/MULTISET to SELECT new values of collection back into collecion.
SQL> DECLARE
2 my_pltable table_rec :=
3 table_rec (t_rec (1, 2), t_rec (1, 2));
4 BEGIN
5 DBMS_OUTPUT.PUT_LINE ('old value: ' || my_pltable (1).a);
6
7 SELECT CAST (
8 MULTISET (
9 SELECT a + 1, b
10 FROM TABLE (my_pltable)) AS table_rec)
11 INTO my_pltable
12 FROM dual;
13
14 DBMS_OUTPUT.PUT_LINE ('new value: ' || my_pltable (1).a);
15 END;
16 /
old value: 1
new value: 2
PL/SQL procedure successfully completed.
3. Use BULK COLLECT to SELECT new values of collection back into collecion. Note this requires an additional collection.
SQL> DECLARE
2 my_pltable table_rec :=
3 table_rec (t_rec (1, 2), t_rec (1, 2));
4 my_new_pltable table_rec;
5 BEGIN
6 DBMS_OUTPUT.PUT_LINE ('old value: ' || my_pltable (1).a);
7
8 SELECT t_rec (a + 1, b)
9 BULK COLLECT INTO my_new_pltable
10 FROM TABLE (my_pltable);
11
12 DBMS_OUTPUT.PUT_LINE ('new value: ' || my_new_pltable(1).a);
13 END;
14 /
old value: 1
new value: 2
PL/SQL procedure successfully completed.
SQL>
Padders

Implementing Detach(as in Panel Collection)like functionality for Bar Graph

I have created a jsff containing horizontal stacked bar graph through collection model.I have not used any VOs ,but I have created an ArrayList in which I send the values to be shown in the graph by fetching data through jdbc call.
Now I want the graph to be displayed in a pop up through a link in the jsff so that the data can be viewed in larger screen area,similar to the funnctionality of 'detach' in the panel collection.
I am using JDev 11.1.1.6 and WLS 10.3.6
Please suggest a mechanism to achieve this.Any help on this issue is appreciated.

Hi Saif Kamaal
The Use Case :
i. When the page is initially rendered , a bar graph will be shown in a region.
ii. That region will contain a button ,which on clicking willl bring the graph in the entire page as popup (Similar to the detach functionality in Panel collection,where a table is rendered and clicking on detach brings the table on entire screen)
I have developed the graph as jsff and that is added to a jspx page and I need that button,if possible, in the jsff itself.

Datepicker with time in collection report

hi,
i have created a report through collection .Now I want a APEX_ITEM.DATE_POPUP with time in report.
For That i have done some changes in my report, when i have change APEX_ITEM.TEXT into APEX_ITEM.DATE_POPUP ,then there is an error has occure and when i have run it.
Error :-ORA-01858: a non-numeric character was found where a numeric was expected.
my code is
select HTMLDB_ITEM.HIDDEN(1,SEQ_ID),
APEX_ITEM.TEXT(2,a.c001) c001,
APEX_ITEM.DATE_POPUP(3,a.c002,'DD/MM/YYYY HH24:MI') c002,
APEX_ITEM.TEXT(4,a.c003) c003
FROM APEX_COLLECTIONS a
where a.collection_name = 'REC_ITEM'
I have change here also .
begin
for i in 1.. HTMLDB_APPLICATION.G_F01.count loop
htmldb_collection.UPDATE_MEMBER (
p_collection_name=> 'REC_ITEM',
p_seq => HTMLDB_APPLICATION.G_F01(i),
p_c001 => HTMLDB_APPLICATION.G_F02(i),
p_c002 => to_date(HTMLDB_APPLICATION.G_F03(i),'DD/MM/YYYY HH24:MI'),
p_c003 => HTMLDB_APPLICATION.G_F04(i)
end loop;
htmldb_collection.add_member
(p_collection_name => 'REC_ITEM',
p_c001 =>NULL,
p_c002 => NULL,
p_c003 => NULL,
end;
In report datepicker item has created, it's not a datepicker with time ,that show only date, not a date with time.
Thanks
manoj

Manoj I have done some workaround, you can read here: date picker error in collection report
Edited by: AndyPol on 2009-09-11 16:24

Simplest way to loop through a HashMap?

Hi everyone,
I'm a beginner at JSP, so please excuse my ignorance...
I have a HashMap in which I need to loop through and print every "key" and associated "value".
Doing research, I have come across multiple examples, but they all seem (to me) rather complex for something I think should be simple.
Here is some code I have now. C_TITLE is a HashMap. My question is, is there an easier way to do this where I don't have to invoke a subclass? Or is this as simple and easy as it can get?
Thanks!
if (C_TITLE.size() > 0) { //only loop if there are items in this hashmap
     for (Iterator i=C_TITLE.entrySet().iterator(); i.hasNext(); ) {
              Map.Entry mapentry = (Map.Entry) i.next();
          out.print (mapentry.getKey() + "|");
          out.print (mapentry.getValue() + "<BR>\n");
}

Iteratir iter = C_TITLE.keySet().iterator();
while(iter.hasNext()) //or your for as well
      Object key = iter.next();
       Object value = C_TITLE.get(key);
}With J2SDK 1.5 there is new for loop to iterate through collections.
This will make Iterators almost unusable.

PO through Collective or RFQ no.

Similar Messages

Maybe you are looking for