PO version change does not resulting output

Hi,
Initially PO created with version "0" and resulted message out put automatically and PO got printed.
Then, user has done some changes to PO then it is resulting version "1" but this vesrion does not results automatic out put as like version "0"
Please suggest me,
Thanks,
Venkat

hi,
Check settings again..
1.whether you have given reason of change while you make changes in the document and whether it has been customized??
2. Check settings for "set up for change displays"
3. check Settings for PO messages ....here check whether the field is defined for relevent changes ie." Print relevent Purchase doc. changes"...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Sep 23, 2010 10:45 AM

Similar Messages

Invalid version: InstanceManager does not have property...

Dear adobe experts,
I've build an adobe form for a client. I've seen that there is a warning, when I download my form, in the attached error list (error.pdf). Here is more info regarding the warning:
- severity: warning
- message ID: 29488
- description: Invalid version: InstanceManager does not have property or function "count" for the current version of the document.
The warning is raised on the initialize event. I've used formcalc in the initializing event. I already tried to catch this warning by changing my code from formcalc to JavaScript but without success.
I've searched on google + the adobe forum and website but I haven't found a way to fix this...
I did find this in the adobe error code reference:
Code
ALC-XTG-032-304 (XML Form service)
Type
Error
Cause
[29488] "Invalid version: field does not have property or function 'length' for the current version of the document."
[29488] "Invalid version: field does not have property or function 'getDisplayItem' for the current version of the document."
[29488] "Invalid version: dataGroup does not have property or function 'spouse' for the current version of the document."
[29488] "Invalid version: dataGroup does not have property or function 'holdings' for the current version of the document."
[29488] "Invalid version: dataGroup does not have property or function 'owner' for the current version of the document."
Action
According to the adobe error code reference there is no possible action for this warning ...
Can anyone help me to fix this warning? Or at least confirm that there is nothing I can do ti fix this warning?
Thanks in advance and kind regards,
Niels

Hi,
Can you post the PDF form to a sharing site so that we can see the error and code?
Best to use acrobat.com, that way other people can take a look at it as well if I can't figure it out.
Steps to share a document...
(Thanks Srini for the instruction text!)
1. Go to URL http://Acrobat.com
2. Create an account if you don't have one.
3. Then login to the website.
4. In top left corner you will see a button called Upload.
5. Click on browse and select the file you want to upload.
6. After Uploading, mouse over on the uploaded file. Click the down arrow button and choose Share document.
7. Then you will be prompted a popup window at the lower left corner. Choose "Publish it" option.
8. In the next pop up window choose "Copy Link" option.
9. You can paste the link in the forum thread.
Hope this helps
Malcolm

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

Component 0DAT (version A) does not exist in the database

Dear experts
i got this error.
Component 0DAT (version A) does not exist in the database
http://static.flickr.com/20/71394172_655d295b7f_o.jpg
A SAP expert recommended
"Use BC to activate the variable 0DAT from InfoObject 0CALDAY."
but i can't find 0DAT.
http://static.flickr.com/35/71390830_1049df5c3a_o.jpg
my system is
http://static.flickr.com/35/71390831_c837af0b47_o.jpg
Thanks in advance
David.kang
Message was edited by: David Kang
Message was edited by: David Kang

Mentor Eugene,
I guess the issues are related to "Sneak Preview version".
well, instead of creating new 0DAT,
i edited the RSZGLOBV table with 0DAT that i created before.
http://static.flickr.com/20/71437761_de16ddee16_o.jpg
http://static.flickr.com/34/71437760_5236824cc2_o.jpg
so two rows were changed. (from 6 to 4 ).
http://static.flickr.com/34/71437762_ed172b5577_o.jpg
<b> What do you think it is okay ? </b>
Finally, i can get rid of " Component 0DAT (version A) does not exist in the database " message.
therefore i expect everything goes well.
but ..
"Information No texts were maintained in language E for variable 0DAT " comes up.
Refer to the screenshot ( http://static.flickr.com/35/71439173_5c996d2111_o.jpg )
[Query Designer screenshot ]
http://static.flickr.com/34/71440191_b2a96a2ac4_o.jpg
[Material Number Master Data ]
http://static.flickr.com/34/71440190_a827c571ae_o.jpg
[Original Data file ]
http://safariexamples.informit.com/0201703661/IO_MAT_TEXT.csv
http://safariexamples.informit.com/0201703661/IO_MAT_ATTR.csv
mentor Eugene! thanks a lot.
with kind regards
David

Error When creating Broadcastings "Portal theme does not fit output format"

Hi All,
When i create a Broadcasting Settings i am getting an Error saying "Portal theme does not fit output format", and below is the detailed that we are getting,
"Diagnosis
You used separate portal themes to generate PDF or print formats (PS or PCL). The output format that you selected is not appropriate for the portal theme currently set.
System Response
The broadcast setting is not consistent and you cannot save or execute it.
Procedure
Change the output format or the portal theme correspondingly. (The portal theme is set to the first valid value for the current output format when you display the corresponding tab page).
Procedure for System Administration
Notification Number RSRD 640"
Can anyone help how to resolve this issue?
Regards,
Muruganand.K

Would you have chance to provide me the sollution...
We are facing the exactly the same error message
Thanks a lot in advance
Regards
Ivan

Boris Title - Changes does not stick

I'm making some changes on my Boris 3D text but the changes does not stick.
I do a bevel on the text and press Apply, but when I see the result nothing happened. I go back in and it looks like I changed nothing. I click the check box but it does not help...

Changes do not stick.
Yrs. for proper English,
Uncle Grump
Thanks for correcting my English Uncle Grump
I think the reason for my problem was that the text was not selected when I did the changes.

Importing a pdf into photoshop CC and it corrupts the artwork slightly but in older photoshop version it does not corrupt?

Hi
When Importing a pdf into photoshop CC it corrupts the artwork slightly but in older photoshop version it does not corrupt? Please help as this corruption slightly marked the artwork, it was then printed and is going to cost my company thousands to replace. [email protected]

"Slightly corrupted" sounds very much akin to "slightly pregnant". Hard to imagine.
I assume you're referring to some sort of image quality deterioration or some added artifacts.
Could you post a screen shot? Just so that someone familiar with PDFs opened in CC can form an idea of the nature of the "corruption" and where the cause might lie.
If you post back, please give complete hardware and software details about your setup, including the exact version of CC so they can see if all updates have been applied.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
software settings,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Financial statement version INT does not exist

Hello Friends,
I hope someone can help me figure this out and I've read discussions similar, just not exactly what I'm looking for. When I run the following reports:
S_ALR_87012271
S_ALR_87012272
S_ALR_87012273
I receive the following error message:
Financial statement version INT does not exist
When I first received this message, I went to T-Code OB58 and entered the "INT" Financial Statement Version here. I've also created a chart of accounts with INT values as well. Can someone help me out on how to eliminate this error and set up cash flow? If you have done this already, please do reply. If not, then please allow those with more experience to help.
Thanks so much!
John

John,
You can define FSVs for a specific chart of accounts, for a group chart of accounts, or without any specific assignment.
In your case, double-check whether you are running the report for the same CoA assignment that you have defined your FSV for in the first place.
As somebody's mentioned earlier, these reports are made using Report Painter (GRR1 / 2 / 3, etc.). Seems FSV = INT has been fixed in these reports for your system. You'll have to edit these reports (using GRR2) and the correct FSV.
Regards
Gulshan

Version 12 does not load. ver 11 works ok. what's wrong??

I have xp. do not have service packs.
newest version 12 does not load, but instead reverts back to ver 11.
What's wrong?? Can i disable ver 12 from loading everytime i load firefox?

thanks for the reply.
the integration manager would be helpful if the installation of the "Crystal Reports Basic 2008 for SAP Business One" (version 12)
would install all required dll's, but its not...
I think maybe I was not clear enough, I will try to explain better:
the problem is that after the installation, I don't see the required dll's in VB6 references and components.
I need to add reference to the CRVIEWER.dll and add the designer craxdui.dll and several more files that are not installed in that version of crystal and I don't know why...?
these files ARE installed fine in "Crystal reports XI developer edition" (ver 11.5), so I can add and edit crystal files inside VB6. the problem is I need them in version 12...
Thanks

Enabling "Save This View" button - change does not stick

Running SharePoint 2013 Server Standard
I have several sites. For some the "Save This View" choice when filtering a view is enabled. However, there are some for which the choice does not display.
I located the setting for this in Editing the Page, Miscellaneous options for which the check button is "Disable 'Save This View'" button. I uncheck the box, hit Apply or OK. No errors. However, the change does not get executed.
I have admin rights to do anything.
Please advise as to other settings that may be overriding this.
Any ideas? Seems to be a bug.

Check below:
http://www.sharemuch.com/2014/03/13/how-to-do-advanced-sharepoint-list-view-filtering-with-query-string-paramters/
http://office.microsoft.com/en-in/sharepoint-help/use-the-list-view-web-part-HA102771012.aspx
Check server render option
If this helped you resolve your issue, please mark it Answered

Pages "Track Changes" does not work when working in cells in a document

While attempting to edit a WORD file (converted to Pages for my macbook) it was discovered that the Track Changes feature will not register if the changes are inside a "cell" in the file. The RFP I am trying to respond to is made up of multiple columns and rows. Anytime you make a change inside the columns or rows the "Track Changes" does not record the change. Outside of the columns/rows it works perfectly.
I download the most recent OS and Pages file last week. The issue started then.
Has anyone had this issue before?

Yes.

Any advice on how to switch to ICloud on my 3g IPhone? I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5. Apple says I have to be running 5 to switch.

Any advice on how to switch to ICloud on my 3g IPhone? I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5. Apple says I have to be running OS5 to switch.

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion
From here > http://www.apple.com/icloud/

When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

Adding users to groups in enterprise dashboard does not result in software showing in creative cloud desktop

if I change membership of a user in the enterprise portal the license does not adapt on the desktop application or web overview. I have tried changing group membership and changing the user.
While changing the membership an error 500 returns at the top of the screen, but membership is changed.
Any advice?
Thanks,
Eric

Hi Ashish,
That was the first thing I tried. logging off from creative desktop, browser even logged off from Windows and OSX, no results. Adding a new non-existent user to the groups works, but changing a user to a different group does not work.
Eric

Business View change does not show in existing Parameter Group

I have an existing report that includes a dynamic, cascading LOV and associated parameter group. The LOV is based on a Business View.
I modified the Business View to limit the available values. (Actually, I modified the Data Foundation and then updated the Business Elements, Business View, and LOV.) I cleared the LOV using the Business View Manager, rescheduled the LOV, and received a message indicating that the refresh was Successful. If I open the report, the old list of values are still displayed.
To test, I created a new report. I used the Enterprise as the data source and selected the Business View used by the LOV and parameter group. If I query the Business View, I only see the rows I expect to see after the change made to the Data Foundation, Business Elements, Business View, .....
How do I force the existing report to use the current LOV?
thanks

Please check whether the following SAP helps:
Business Objects Notes Get Help | Close
   1196364 - Need to refresh List of values (LOV) in the prompt, to be able to see list with all values in InfoView
Language   English     Version   21     Validity: 11.07.2008 - active
Edit Print View Show change log Show Internal Memos Compare Versions
Content:    Summary   |   Header Data   |   Other Properties
Symptom
Refreshing report with prompts, the list of values (LOV) does not appear.
LOV needs to be refreshed for the values to show/appear
Reproducing the Issue
Environment :
BOXI 3.0
Cause
Keep last selected value option is defined in the prompt property.
Resolution
Clear the option Keep last selected value in prompt property.
Save report
Keywords
WebI WebItelligence show prompt refresh Rich Client
Header Data
Released on 17.07.2008 14:42:32 by James Terry (I817754)
Current Release Status Released to Customer
Target Release Status Released to Customer
Responsible Stephanie Adam ( I049611 )
Category Problem
Application Area BOJ-BIP
Product Version BOBJ ENTERPRISE XI 3.0
BOBJ ENTERPRISE XI
Other Properties
Business Objects Article ID 2060972
Business Objects BugID ADAPT00898429
Business Objects BugSystem ADAPT
Business Objects ProductFamilyMajorVersion BusinessObjects Enterprise XI
Web Intelligence XI
Business Objects ProductName BusinessObjects
Web Intelligence
Business Objects ProductMajorVersion Web Intelligence XI
Business Objects BuildVersion 11.5.0.0
Business Objects SupportQueue Design
Business Objects ProductLanguage English

PO version change does not resulting output

Similar Messages

Maybe you are looking for