POI HSSFWorkbook using to read data of datetime format

Hi
I am trying to read the drata from excel sheet which contain data as in date format.
The data is in the datetime format but I am unable to read this data in our jsp page.
its shows the cell type is of integer type.
able to read simple date in format yyyy/mm/dd but getting problem in yyyy/mm/dd hh mm format.
guide me what to to.
Thanks
parveen kumar

Similar Messages

How to read data from PC format external disk, using Labview MAC

Hi folks,
For years I have not been able to read data files from a PC formatted (created) external disk, using Labview for Mac. More specifically:
- I have Labview 7.01 running on OS X 10.4.11 on a PowerBook G4
- I have a 500GB external USB/firewire disk that was formatted on a PC and has data files (custom format) that were created on the PC. I believe that C code actually creates the files, but Labview 7/PC opens the files and appends some info (I don't think the fact that C or Labview touches the files is actually relevant to this issue though).
- I can connect the 500 GB disk to my mac, and it will mount just fine and OS X can see all of the data files (and anything else on the disk).
- if I use my Labview app to open and read a data file it fails:
- open/create/replace.vi (with read-only access) shows a file dialog window that lets me navigate to any file on the external disk.
- but, the vi returns an error 7
- if I use OS X to copy the data file to my Mac disk, my Labview app works fine.
So, does anyone know if:
- I'm just doing something wrong in my Mac Labview app?
- Labview 7.x solves this problem?
- Labview 8/Mac solves this problem?
- OS X 10.5 solves this problem; with Labview 7 or 8; or does OS X 10.5 worsen the problem?
Thanks, in advance...

Hi kehander,
Thanks for the reply. I tried filling a constant path with the Mac-defined path to a data file on the USB disk (ie "DATA2:file1.dat"). This resulted in the same error message.
I then considered that maybe I was misinterpreting the LV error message, and that perhaps I was supposed to address the file using PC-notation (ie. "DATA2\file1.dat"), even though the app is running on a Mac. No joy with this, but I get a different error msg:
"Error 1430 occurred at Open File
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path."
Can you share what your reasoning was for your suggestion... I'm not sure I understand why a constant path would produce different results?

How to read data in correct format from EXCEL file into an internal table??

Hi Experts,
My requirement is to upload data from an excel file on presentation server into an internal table on SRM server.
I used 'GUI_UPLOAD' function module to achieve the same but all the the data is getting uploaded in # only.I had set in the 'HAS_FIELD_SEPARATOR' to 'X' to overcome this problem.
But all the efforts are in vain. The function module 'ALSM_EXCEL_TO_INTERNAL_TABLE' doesn't exist on SRM Server and I am not getting any other function module having similar functionality available on SRM server.
I have written the following code:-
TYPES: BEGIN OF ty_addr_loc,
 userid TYPE xubname, "User Id
 addr_code TYPE char4, "3 Digit Site Location Code/4 Digit
 "Alternate Address
 loc_id TYPE bbp_location, "Indicator: Address is standard address
 END OF ty_addr_loc.
*Retrieving file name
parameters: p_file type rlgrap-filename.
DATA:
 Local variable holding file name
 l_file TYPE string,
 Local Variable holding the file type,
 l_type TYPE filetype VALUE 'ASC',
 Local Variable holding the field separator
 l_sep TYPE char01,
 i_tab type standard table of ty_addr_loc.
Clearing local variables
CLEAR:
 l_file,
 l_sep.
Initializing the local variables
MOVE p_file TO l_file.
l_sep = 'X'.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = l_file
 filetype = l_type
 has_field_separator = l_sep
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
 CODEPAGE = ' '
 IGNORE_CERR = ABAP_TRUE
 REPLACEMENT = '#'
 CHECK_BOM = ' '
 VIRUS_SCAN_PROFILE =
 NO_AUTH_CHECK = ' '
IMPORTING
 FILELENGTH =
 HEADER =
 TABLES
 data_tab = i_tab
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17
IF sy-subrc <> 0.
Throwing an information message
 MESSAGE i003. "Data Upload Failed
 LEAVE LIST-PROCESSING.
ENDIF.
Please tell me a way out. I have to make a delivery urgently.
Thanks in advance,
Swati Gupta

Hi
Try the FM KCD_EXCEL_OLE_TO_INT_CONVERT
Sample:
call function 'KCD_EXCEL_OLE_TO_INT_CONVERT'
 exporting
 filename = i_filename
 i_begin_col = l_begin_col
 i_begin_row = l_begin_row
 i_end_col = l_end_col
 i_end_row = l_end_row
 tables
 intern = xt_intern
 exceptions
 INCONSISTENT_PARAMETERS = 201
 UPLOAD_OLE = 201.
if sy-subrc <> 0.
 e_subrc = sy-subrc.
 exit.
endif.
reward if Helpful.

How to read date as string (format dd-mm-yyyy) and store it as Date object

Hi. I would like to read from keyboard String with a date and put this value to Date object. How can i do this???
Thanks

Check out java.text.SimpleDateFormat.
Basically
String dateString = readUserInput(); // get the string
SimpleDateFormat myFormat = new SimpleDateFormat("dd-MM-yyyy");
Date myDate = myFormat.parse(dateString);

REP-1818: Unable to read data in image format.

I am using Report Builder 9.0.4.1.0
Oracle ORACLE PL/SQL V9.0.1.5.0 - Production
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Operating system is Linux Redhat
I have a run that produces a report from a table with blobs.
I get error REP-1818: on records that have large a Blob.
Is there a limit on the size of a blob in Reports?
Is there a workaround for this problem?

I think there is no way to solve this issue......!!
best regards

Why some columns are not read into Power Pivot when reading data from a SQL query

I have this SQL query that I want to use to read data to PowerPivot from:
SELECT Score.FieldCount as fieldcount, Score.Record.GetAt(0) as predicted_gender, Score.Record.GetAt(1) as probability_of_gender, Score.Record.GetAt(2)
as probability_of_m,
Score.Record.GetAt(3) as probability_of_f, Score.Record.GetAt(4) as customerkey
FROM
SELECT * FROM dbo.myCLR1(
dbo.MyCLR2('c:\fILES\MLSM.xml'),
'SELECT * FROM [dbo].[Customer]') Input
) Score
After I click 'Finish' in "Table Import Wizard", I can only get 1 column (FieldCount) in Power Pivot window. Why don't I get the other 4 columns? If I save the result to a table I do get all columns but my goal is to dynamically present the result
so that's not an option. Can anyone shed some light?
Thanks,
Chu
-- Predict everything. http://www.predixionsoftware.com

If I only pass in query as
SELECT * FROM dbo.myCLR1(
dbo.MyCLR2('c:\fILES\MLSM.xml'),
'SELECT * FROM [dbo].[Customer]') Input
I do get 2 columns (FieldCount and Record as shown below)
-- Predict everything. http://www.predixionsoftware.com

LPX-00601: Invalid token in: err while trying to read data from xml

Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile BFILE;
l_clob CLOB;
l_parser dbms_xmlparser.Parser;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_nl2 dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_n2 dbms_xmldom.DOMNode;
l_temp VARCHAR2(1000);
v_errors internet_clients.errors%type;
src_csid NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset INTEGER := 1;
src_offset INTEGER := 1;
lang_context INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
v_count number := 0; --total records
v_count_s number := 0; -- sucsess record
v_count_f number := 0; -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
 dbms_xmlparser.parseClob(l_parser, l_clob);
 l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
 l_n := dbms_xmldom.item(l_nl, cur_emp);
 cur_emp2:=0;
 loop
 v_count := v_count + 1;
 begin
 -- Use XPATH syntax to assign values to he elements of the collection.
 dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
 dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
 dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
 dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
 dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
 exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
 --COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
 dbms_lob.freetemporary(l_clob);
 dbms_xmlparser.freeParser(l_parser);
 dbms_xmldom.freeDocument(l_doc);
 null;
 ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010

Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_a_ns VARCHAR2(32767);
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2(32767);
BEGIN
l_wsdl_url := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace := 'http://tempuri.org/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
 wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
 service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
 service_handle => l_service,
 port_name => l_port_qname,
 operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
 <GetFieldsName xmlns="' || l_namespace || '">
 <user>' || in_username || '</user>
 <password>'|| in_password || '</password>
 </GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
 request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
 dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair

How to read data from OMR Reader

need help
is there any frameworks that could be used to read data from OMR reader
urjent
please...

Please be more specific when using acronyms. I
assume you mean "Optical Mark Recognition" not
"Office of Mental Retardation"!sorry ..
its OpticalMarkRecognition..
but it quite obvious ..
is there any specific classes for that..frame works etc to deal with this..

Please HELP!!! Issue w/ Transformation from date to dateTime type

Hi Guys,
I'm having a problem with converting date to dateTime. We have a webservice that contain dateTime type and the input is date type. Is there a simple way to convert/transform a date to dateTime format? Example date = "2009-09-12", need to convert to dateTime = "2009-09-12T00:00:00". Thanks for helping!!!

For this specific situation you could also make use of the concat string funtion: concat(date, 'T00:00:00'). The result equals your dateTime format.
Kind Regards,
Andre

Problem while reading data from USB with JSR80

Hi
Iam using Fedora 9 with 32 bit.
Iam using JSR80 api to read the data from USB devices.
I successfully set-up the code as per given on JSR80 site on my eclipsce ide.
below is my code which iam using to read data from usb
import com.ibm.jusb.*;
import java.util.List;
import javax.usb.*;
import java.util.List;
public class USBReader {
public static UsbInterface interf = null;
 public static void main(String[] args) {
 try
 {// Access the system USB services, and access to the root
 // hub. Then traverse through the root hub.
 System.out.println("Application started");
 UsbServices services = UsbHostManager.getUsbServices();
 UsbHub rootHub = services.getRootUsbHub();
 traverse(rootHub);
 testIO(rootHub);
 } catch (Exception e) {
 System.out.println("The Exception occured"+e.getMessage());
 public static void traverse(UsbDevice device){
 System.out.println("Iam in traverse ");
 if (device.isUsbHub()){
 // This is a USB Hub, traverse through the hub.
 System.out.println("The device is hub");
 List attachedDevices = ((UsbHub) device).getAttachedUsbDevices();
 System.out.println("The attached devices size:"+attachedDevices.size());
 for (int i=0; i<attachedDevices.size(); i++){
 traverse((UsbDevice) attachedDevices.get(i));
 if(attachedDevices !=null){
 for(int j=0;j<attachedDevices.size();j++){
 System.out.println("The device is"+attachedDevices.get(j));
 else{
 // This is a USB function, not a hub.
 // Do something.
 System.out.println("The device is not hub");
 public static void testIO(UsbDevice device) throws UsbClaimException, UsbNotActiveException, UsbDisconnectedException, UsbException{
 System.out.println("Iam in testIO");
 try{
 // Access to the active configuration of the USB device, obtain
 // all the interfaces available in that configuration.
 UsbConfiguration config = device.getActiveUsbConfiguration();
 List totalInterfaces = config.getUsbInterfaces();
 System.out.println("The Total interfaces: "+totalInterfaces.size());
 // Traverse through all the interfaces, and access the endpoints
 // available to that interface for I/O.
 for (int i=0; i<totalInterfaces.size(); i++){
 interf = (UsbInterface) totalInterfaces.get(i);
 System.out.println("The interfaces are "+totalInterfaces.get(i));
 String strinf=interf.getInterfaceString();
 System.out.println("Claimed Status: "+interf.isClaimed());
 System.out.println("Active status : "+interf.isActive());
 System.out.println("Settings :"+interf.getNumSettings());
 //interf.release();
 interf.claim();
 List totalEndpoints = interf.getUsbEndpoints();
 for (int j=0; j<totalEndpoints.size(); j++){
 // Access the particular endpoint, determine the direction
 // of its data flow, and type of data transfer, and open the
 // data pipe for I/O.
 UsbEndpoint ep = (UsbEndpoint) totalEndpoints.get(i);
 int direction = ep.getDirection();
 int type = ep.getType();
 UsbPipe pipe = ep.getUsbPipe();
 pipe.open();
 // Perform I/O through the USB pipe here.
 pipe.close();
 interf.release();
 } catch (Exception e) {
 System.out.println("Exception in TestIO"+e.getMessage());
 e.printStackTrace();
}When i execute the above code i get the following exception
Exception in TestIOCannot claim an interface on a virtual root hub.
javax.usb.UsbException: Cannot claim an interface on a virtual root hub.
 at com.ibm.jusb.VirtualRootUsbHubImp$VirtualRootUsbInterfaceOsImp.claim(VirtualRootUsbHubImp.java:143)
 at com.ibm.jusb.os.DefaultUsbInterfaceOsImp.claim(DefaultUsbInterfaceOsImp.java:54)
 at com.ibm.jusb.UsbInterfaceImp.claim(UsbInterfaceImp.java:109)
 at com.ibm.jusb.UsbInterfaceImp.claim(UsbInterfaceImp.java:83)
 at USBReader.testIO(USBReader.java:60)
 at USBReader.main(USBReader.java:15)iam not getting the clue for it .

Cannot claim an interface on a virtual root hubSo don't do that? I have no idea how to tell, but clearly you need to test a few more attributes before you claim. Or else just log the claim error and continue with the next interface.

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

How can i read data in pagemaker file (PMD) using Visual Studio C# NET ?

I have bunch of data in .PMD file (Page Maker Document). Which contains mathematical equations and chemistry formulas, I am a .NET developer, and I am writing code for one of the educational learning system. For that I need to read and store mathematical equations/ chemistry formulas from .PMD file into database then display on the browser page.
Is it possible to read data from .PMD file using C#.NET, do I need to use any external libraries. How can I import .PMD to MATHML (Mathematical Markup language)?
Any existing examples for C#.NET?
Please help me regarding this.

I can't claim to know much about visual C# Net, but I do know a bit about pagemaker. It really can't handle equations. there are a few work arounds involving things like baseline shifts and multiple text boxes, but generally equations were created in different programs and placed in pagemaker in picture or eps files. Either way the chances of extracting usable data out of pagemaker is very slim.
Jay

Use Adobe Reader to Save Form Data

I use Acrobat 8 Professional to create several forms and enabled usage rights in Adobe Reader so that my users can save the form data locally using Adobe Reader 7 or higher. My questions are: (1.)Is there a limit to saving the form data? For example, the form can only be save 500 times per form or is it unlimited. (2.)If there is a limit to saving the form like 500 times, can the same form be recreated and the limit of 500 starts all over again? (3.)Do I need to purchase a license to save these form data? (4.)How many forms can have enable usage rights in Adobe Reader per Adobe Acrobat professional? The reason why i'm asking these questions is because I want to be in compliance with the Adobe license. My users don't have Adobe Acrobat Professional, but would like to use Adobe Reader to save the form data.

>(1.)Is there a limit to saving the form data?
It is my understanding that you can harvest data from a form 500 times whether that be from one user of 500 users.
>(2.)If there is a limit to saving the form like 500 times, can the same form be recreated and the limit of 500 starts all over again
You'd probably be walking on thin ice by trying that. Could be a loophole but maybe not.
>(3.)Do I need to purchase a license to save these form data?
Not if you stay within the limit that is stated in the EULA.
>(4.)How many forms can have enable usage rights in Adobe Reader per Adobe Acrobat professional?
Different forms? As far as I know there is no limit to the amount of different forms you use.
In my opinion, if you think you are going to go anywhere near the limitations of the EULA, consult with your attorney before proceeding. The form enabling function was never intended for large business use. Adobe has another, more costly, solution for that.

How to read data from a router by using labview

I am a beginner labview. How to read data from a router by using labview ?

What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML.

Hi experts, how to use open sql to read data from one " maintenance view"?

i want to use this part of data within report ,so how to use open sql statement to read data from one " maintenance view"?

Hi
You can't use OPEN SQl statements to fetch data from maintenance view
You have to use only Database views
see the different types of views and the difference
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Reward points for useful Answers
Regards
Anji

POI HSSFWorkbook using to read data of datetime format

Similar Messages

Maybe you are looking for