Poor scroll response

After upgrading to RH8, I have encountered problems related
to using the mouse.
When I scroll with the mouse wheel in a topic window, pod,
etc., RH8 does not respond well at all. It seems to only respond to
one click of the wheel. If I scroll multiple clicks, response is
very, very slow, and it seems the display only moves by one line.
When I double-click an item in a list (topic name, contents
entry, etc.), I have to double-click very slowly and be very
precise. It seems that the least bit of movement of the mouse after
the double-click causes the action to be ignored.
I have a Logitech MX 1100, cordless, laser mouse. The latest
drivers are installed. There is no helpful information on the
Logitech Web site.
I did not have these problems prior to the upgrade.
I do not have these problems in any other program, in my
broswer, etc. The problem only presents in RH8.
I have searched all available resources. Has anyone
experienced this problem? Does anyone have a solution.

If that's the case, you should return the phone to your carrier for a replacement. This is assuming that it's newer than one year old. If you choose to do so, make sure you do a data backup with BlackBerry Desktop Software first. If it's older than one year, wearing cloth bandages might be the answer.
Please keep us posted.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

Poor trackpad response

Over the past week or two my trackpad has become almost completely non-responsive. To scroll through a list I have to constantly swipe across it and then it will scroll one or two items at a time, if at all. I've played with the sensitivity settings but that has little if any effect. I saw another post that indicated a piece of tissue between your finger and the trackpad will "fix" it. It does, and if I have a bandaid on (for what it's worth a cloth one not a plastic one) the trackpad performs beautifully. Excellent response and very precise control. Obviously neither is an acceptable solution.
I don't know if this is related or not, but at the same time, the BlackBerry button (to the left of the trackpad) has been troublesome as well. I have to click it several times to get the menu to pop up.
Any suggestions? Is this just a wear and tear issue and I need to get a new phone?

If that's the case, you should return the phone to your carrier for a replacement. This is assuming that it's newer than one year old. If you choose to do so, make sure you do a data backup with BlackBerry Desktop Software first. If it's older than one year, wearing cloth bandages might be the answer.
Please keep us posted.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Poor Screen Response

I love the iPad, but the screen is driving me nuts. I find that the screen is MUCH less responsive than the iPhone.
Far too often I have to tap an app icon upwards of 5 times just to get the device to recognize that it has been tapped.
This also extends to entering a text field, selecting icons in an app's menu bar, even the keyboard.
VERY disappointing!!!

Return you ipad it is defective!
Ipad should be waaay faster compared to iphone and screen should respond well !
Again... RETURN YOUR IPAD

Upgraded to Firefox 5. Bookmark window and selection process has changed -Scrolling response is too sensitive

Upgraded to Firefox 5. Bookmark folder content display and selection process is now different than last version. It is difficult to scroll down my bookmark files, as the v5 now INSTANTLY opens a file if you ever-so-slightly slow down as you approach the file you want to open.
Please supply new instructions for bookmark selection - Or fix it.
I will switch browsers while waiting for fix (Is it possible to go back to previous V of Firefox?)
Computer - MacBook - 2010 version
OSX 10.5.8

I have this same problem on my MacBook Pro. I'm disturbed that suitable quality control was not conducted before an upgrade was deployed that created this problem with a very fundamental function of the browser.

New Alpine - poor bass response

I am hoping someone out there has a recommendation. I haven't been satisfied with the answers I have gotten from either the local Best Buy store or Crutchfield, whom everyone seems to rave about.
Thinking it would be a permanent solution I replaced the stock - and mediocre - stereo in my 95 Nissan pickup with an Alpine CDA-9883 deck and Sony xplod 4 way poly cone 6.5s (rear) and 5.25s (front) (XS1342 I think). Installation was basically a snap.
I noticed the difference in the high end immediately - very clear - but I was quite underwhelmed by the low end, which I have since compared with the stock stereos in both our 2001 Toyota Rav4 and 2000 Ford Taurus. Both of the latter sound warmer and have much rounder tones at the low end even with the treble set flat. I was not expecting the shake the neighborhood but I don't understand why the Toyota and Ford factory stereos should outperform an Alpine!
I have experimented with the bass bandwidth and center frequency settings and found little audible difference between them.
I find it hard to believe that the deck is the problem but can the speakers really be that bad? The salesman at Best Buy, where I bought the deck, suggested that the polycarbonate speakers often underperform even cheap paper cones and that the best solution would be a silk cone speaker. Crutchfield suggested a Blaupunkt self-powered sub, but I wasn't really planning to drop another $200 and, though that would be a nice addition, I don't think its necessary to get the performance I was looking for. They also never were able to address why the system sounded weaker at the low end than the two factory stereos. The system has plenty of power. Its only 18 watts RMS but its a VERY STRONG 18 watts.
So question 1 - Any idea why the system I described would be beat out by acceptable but average factory stereos?
Question 2 - Assuming I need to add to the system would a decent 6.5 in the rear do the job or should I start saving for that sub? Remember that its a small truck so not much power should be necessary.
Thanks for any advice or suggestions!

1. I think the term "beat out" isn't what happened. You have to look at what you replaced. Most factory systems are designed with the cheapest materials possible (i.e. paper cone, foam surround). Looking at those speakers, they are considered "one way" because just the cone is the speaker. So, why do factory speakers give you more bass. To be honest, I don't know the real reason but I can tell you in my experience it tends to be because of the design of the speaker. It is a full cone, with no cutout for a tweeter. Again, in my experience, that tends to give the speaker a better bass response.
Now, look at the speakers you replaced them with. You probably have 2 to 3-way speakers with a tweeter in the center. That alone accounts for you lack of bass. Most aftermarket manufacturers design their speakers to work with a full aftermarket system, amps and woofers included. So the speakers inside the car are designed for mids and highs, with little emphasis on the low end, the speakers just can't reproduce it as deisgned, or not very well at the least.Even if you amplify the speakers and push them to their max, I don't think you will get what you are looking for.
2. Going off answer 1, yes a sub will solve your problem, not a pair of 6.5"s. Being that it is a truck, there are plenty of applications out there to fit even something as small as an 8" (10" if you're shopping at BB).
When I advise someone about speaker replacement, the first thing I tell them is they are going to lose some bass. It's just a matter of fact. What's nice about a car stereo system is you can piece it out, meaning you can do it a step at a time and get to a point where you are happy. That could be just a new head unit up to a full system and all the combinations inbetween.
Hope that helps. Good luck with your sound.

T410 Touchpad - poor scrolling, multitouch

I just got a new T410 with Windows 7 Professional and am already very frustrated with the touchpad when it comes to scrolling and multitouch things like pinch to zoom.
With scrolling, I can't explain it any better than it just doesn't happen sometimes. I'll put both fingers on the trackpad and move down, but the window goes nowhere. Sometimes changing the amount of pressure applied helps, or lifting my fingers off and trying again, but sometimes not. Sometimes after the scrolling fails to occur, the pointer will actually get stuck until I lift off and try again. I read in another thread it might be Firefox related but I've noticed a similar thing in all apps (including the Nav settings app itsefl)
With multitouch, the pinch to zoom sometimes works, sometimes only it one direction, but sometimes not at all. This is less important to me than the scrolling but it just seems like another symptom of something wrong.
Do I need to install an update of some kind? I just installed UltraNav driver 15.2.20.0 but it didn't seem to help.

Thanks Colonel ONeill, I tried those suggestions and it did not seem to have any effect. I've noticed some more specific behavior. If I, for example, have two fingers down and am scrolling up and down, and then I lift one finger and continue moving that one finger up and down, on the screen it will continue scrolling up and down even though I've lifted a finger off. Likewise it seems like if I don't very deliberately lift my finger off after moving the mouse, and clearly place down two fingers to scroll, it might not recognize it. In general it seems like it has difficulty picking up on how many fingers are on the trackpad, and seems to sometimes ignore two fingers down at once as it if it might be accidental. Sorry for all the generalized and vague information but I'm coming from the MacBook world where this all works very well. Do you think it might be a setting or config on my end, or is the implementation just not as good?

Intermittant poor mouse response indicates interloper?

I have an apple wireless mouse and the tracking response is great most of the time.
I have noticed though that sometimes when I'm on the internet ... or just using an app like my email client, or itunes, or my finance program .... tracking response becomes sluggish.
I don't think this is a mouse problem ... something seems to be getting higher priority in the CPU. But ...
When this happens, the Activity Monitor continuously shows process loads are below 5% total.
Does the Activity monitor really show ALL processes?
Are there known security threats that are able to shield themselves from scrutiny by the Activity monitor? ... it is true that when I fire up the Activity Monitor the mouse appears to track normally again.
It's kinda hard to believe a MacPro could be so process bound by vanilla apps it cannot service the mouse in real time ... especially when Activity Monitor says everybody's behaving.
So naturally I'm a little paranoid.
I'm pretty careful about what I let in the door with my admin privileges, but hey, some of those bad guys are pretty clever.
Any thoughts about how I might track this down?

The activity Monitor does show all processes but you may want to switch to view something like Hierarchical Processes or one of the other options. All means ALL and that is a lot so something may slip by without you noticing.
A way that might help you track down anything untoward is the use of the Console or System logs. Note the times that the activity slows the mouse and then look at the logs. There IS a lot of information there, so it may take quite a time to sift through.
Another point: what other applications are open? I seem to remember a while back that MS Office would cause some mouse problems. Also, does this behaviour manifest iteself with a non-wireless mouse; and have you tried to work in another user account? All may help narrow the problem down.

Intermittent low volume and poor frequency response

I have a 10 month old 30 Gig video IPOD that drops the volume level and loses all its low frequency response at times and then will recover after a while. This happens on a song or songs that I know are properly leveled and that work sometimes and not at other times. The issue seems to be much more prevalent when IPOD is cold or cool. After it has been operating for an hour or so the problem seems to go away. It is very common when first turned on. I am getting ready to return it while it is still under warranty but thought maybe someone has an easy fix.

Returned for warranty repair.

Poor bass response on Touareg sound system

I have an iPhone that is connected to my Touareg's 2004 headunit, with Navigation, using the Harmon-Kardon DS-1 adapter. I connect using the AUX input. I just can't get any bass response through the sound system and my treble is all the way down and the mid and bass are all the way up. I've been told that the problem I"m experiencing is due to the input impedance on the Touareg's aux input. I connect to it through the multi-pin connection on the bottom of the iPhone and not the earphone output. Any ideas?

I'd suggest a headphone amplifier, such as the ones sold here:
http://www.headphone.com/products/headphone-amps/

Anyone else have very poor scrolling in mavericks?

My scrolling and dock no move like 8bit graphics since the update, Apple fix this !

Have been trying now for 2 days to find the cause. Still havent found it. However, as it became so annoying I decided to do a clean instal. Carbon copy cloned all files. Clean instal of Mavericks and new user set up. Did a full test before bringing over any data. Fixed the issue. Then used migration assitant to bring everything back. The only thing i didnt bring over was computer settings. Have now been testing for an hour or so and no tearing issues when scrolling. Also the dock animation is normal. Had a few very small problems with missing drivers but was easy to fix.
Note: Found that the easyiest way to replicate the issue was using geastures with the magic mouse or trackpad to scroll accross to a second desktop and back to the first. Saw the most tearing in this process. Since clean install, all works fine.
Hope this helps. Pain in the A** but atleast a fix.

Poor service response times

My entire system has crashed, no tv, no telephone and no internet! The power supply for the fios equipment has failed, and I have to wait two days for a service call that will only take 5 minutes to fix! **bleep**! Thank God my commitment is over and my Direct Tv dish is still up! Thanks for nothing! !!

That the hallmark of Verizon.
A Verizon service tech came out to my neighborhood on a Saturday afternoon and was working on the main fiber distro box and UNPLUGED my line when he was doing what ever it was he was supposed to be doing (he should have messed with me at all). I know this because I was walking my dogs and walked past him as he was opening the box and playing with the mess of yellow fiber lines, unpluging and pluging back in (which he shouldn't have been doing at all).
He left at about 4pm and I discovered the loss of service about 15-30 minutes later. NO PHONE, NO TV, NO INTERNET!
I was on my cell phone on hold for 30 minutes before getting a tech wasted about an hour going through their "standard troubleshooting checklist" having me unplug the battery to reset the box etc... finally he realized what I was saying that the service tech effected my fiber connection/service, but couldn't get the tech back out since he had gone home!!!!!
The earliest they could schedule a tech to come out and fix it was late Monday evening to reconnect my service at the distro box. The tech asked where my ONT box was at and I gave him detailed information about where it was at and how to get to it, since he said he had no idea when the tech would be out and they they wouldn't need to enter the house. I wasn't happy spending the weekend with no TV, no Phone, no Internet, but really didn't have a choice.
Monday comes and I get a text message saying the tech came and left because no one was at home (my roommate was at home but the tech didn't ring the doorbell to get his attention upstairs). He didn't even check the connection at the distro box (which was the only problem) and was clearly written up in the tech order. I call VZ from my cell phone and was on hold for almost an hour before I finally got to talk to a human who proceeded to tell me I should have been home and it was my fault. and that I'd have to wait until Thursday before they could get a tech out.
I lost it and demanded to speak to his supervisor and waited another 45 minutes before the supervisor finally got on the phone with me and after 15 minute discussion he was able to get a tech scheduled to come out the next day (Tuesday).
The tech came out and spent a whole 10 minutes on site and all he did was plug the fiber for my house back into the distro panel.
Oh and VZ made me call separately to customer service to get a billing adjustment for the days I didn't have FIOS service and it was like pulling teeth and all they offered was an adjustment for the 3 days of service that was interrupted. When I got the bill I saw they only it applied it to the bare basic services and charged me full price for all the premium movie services even though they weren't available.
VZ still hasn't a clue about customer service. They had the chance to fix it by sendng the tech back out to fix his error that night, and ending it with no issue. But no, they dragged it out and got all typical VZ "we can't attitude" and inconvienced me for 4 days and I had to burn up several hours of my cell minutes to be on hold and fight with VZ to get them to fix their problem, and they talk to me like they are doing me a BIG favor by crediting me the prorated charge for the days they interrupted my FIOS service...
I was bragging about my FIOS service to my friends and co-workers, but after the HORRIBLE experience, I recommend everyone to stick with cable and pass on FIOS, since you can't trust the service. If you can get Dish or DirecTV then go for it.

Poor screen response with IOS 8x

Since upgrading the software on my iPad 3 to 8.xx the screen has become largely unresponsive within an app. Especially true of dragging or swiping, but generally much slower overall. Screen autorotation is erratic. I have tried restarts, closing all open apps, and changing screen brightness to manual. Nothing seems to work.
iPad is increasingly unusable.

Hello ol'man,
I'm sorry to hear you are having these issues with your iPad. If you are seeing multiple issues with the touch interface after a recent update, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPad to factory settings and testing it in that default condition to see if the issues persist before restoring your data. You may find the following article helpful:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
- Brenden

HT1925 I cannot print a CD Jewel case insert using iTunes 11. Many people are having the same problem since iTunes 11 came on the market. Has anyone else had this problem. The second problem I'm having is poor customer response from iTunes.......

When does apple expect to release an update of itunes 11. I cannot print a CD Jewel case insert.

When does apple expect to release an update of itunes 11. I cannot print a CD Jewel case insert.

Poor wifi response

one or 2 bars only show and maybe one network found when a other mac book pro finds a least 5 networks

And your question is?

Frequency response: "very poor" on SB audigy

just encountered this very strange thing. Right Mark Audio Analyzer 5.5 reports and diagrams a "very poor" frequency response on my SB0570 Audigy at 44 Khz and 6 bits (not only) loop-back test.
http://img86.imageshack.us/img86/6409/rmbenchmark3pv.jpg
is this normal?

walkietv wrote:
ahaa! thanks. the problem is the guide is pretty old and the mixer and EAX look different. Could you tell me please exactly what should i change. I mean what to put in REC, Source in the mixer. I checked the EAX console-only time scalling was acti've. Any other setting in EAX? thank you!
- all options on all EAX panels tabs needs to be set 'OFF' (i.e. not enabled).
- if you're running the loop back test (line-out --> line-in), the Rec -source shall be set to AnalogMix() (or if you see the Line-In mentioned there as separate source then select it).
- you can set the monitor while recording by pressing the '+' sign above the Line-In slider (Surround Mixer) --> disable this option (i.e. no monitoring while measuring)
Other settings:
- windows audio performance options --> set acceleration and SRC to 00%
- on Surround Mixer, set master volume 00%, Source: Wave 00%, Line-In 50% and rec source 50% (adjust the signal level to ~ -dB by moving the Line-In or/and rec sliders)
jutapa

Poor scroll response

Similar Messages

Maybe you are looking for