Pop up message for confirmation in standard bsp on approve button

Dear friends
I am supposed to put one pop up confirmation message in 'hap_document' bsp application on approve button, this is MVC frame based application and used to show appraisal details. I have check with the event handlers, but is structured dynamically. I have put a break point at various places. but from the portal when i m running the application it doesnt go into debugger..
Please give me some ideas how to debug this application and how i will know the place where i need to do the coding for the pop-up confirmation message.. any help of yours will be greatly appreciated
thanking you
Regards
Naeem

Dear Naim Khan S Babi,
Different controllers, views and BSP pages are availabe withing the application.
You just keep the debug on the on the main methods like, DO_INIT, DO_REQUEST and DO_HANDLE_EVENT. So that you easily find where your application navigates.
Hope this will be helpful.
Regards,
Gokul.N

Similar Messages

Pop up message for advance not coming at the time of invoicing.

Dear All,
The moment IV is being made pop up message for advance is not coming for those vendors who have been posted with advance before Apr.2010. Apr.2010 onward it is coming correctly for same vendors. FBKP checked and found ok about message setting.
Please help me out of this issue.....
Thanks and regards,
DNJ.

HI,
Have you done the miro for capturing all the custom duties .iF done, the system will ask for the commercial invoice no during MIGo, then enter the corresponding invoice no and year, then the system will take you to the excise tab.
Regards,
velu

Pop up message for 0019 infotype

Hi gurus,
can you help me out my requirement is when ever i mainatain infotypes 0016 and 0019 system should pop a message showing the reminder date for that event can you tell me how can i do it .If i run a standard report date monitoring i can see the data but i need automatically generated POP up message.
Regards
Smitha

Hi,
You can use Dynamic actions to get this done, please check table T588Z to do this configuration. Hope this will help you, Thanks.
Regards,
Sridhar.

Error message for Confirmation

Hi,
We have a error message for back end service entry creation in the Application monitor for Confirmations.
There is no outbound or Inbound Idoc found with error.
From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
Thannks
Jimmi

Hi,
If you are doing confirmation in SRM , it is Extended classic scenario.
error : There is no outbound or Inbound Idoc found with error
You have not created the IDoc for the outbound Idoc for the confirmation to take to the backend.
Create the Message type and partner profile in WE20
Create Distribution model in SRM -T.code :BD 64
we found the PO Number or Confirmation number to check whether the confirmation is posted or not
Soln: Check in confirmation in display/process confirmation in SRM enter the timeframe
(or) check in R/3 in ME23N by putting the Purchase order no and check the goods receipt
Regards
Ganesh Kumar.G.

Trying to make a pop up message for a loan calculator

Yes this is very basic, but I am very basic. I am using the init() method, and paint() method "classes" as applet to make a loan calculator. I have the calculating all done, and correct, but if someone puts in a nonreal number, or an amount they want to take in less than 0 I want the pop up message tell them they are crazy. How would I create a message popup? The code below is the full code for my loan calculator.
* Programmer: Carl Finch
* Program: The Bank of America Loan Calculator(not affiliated with Bank of * America just a goof)
* Date: 01/12/05
* Purpose: Learn the paint() function, action performed function, and
* all their "special methods"
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.applet.*;
public class Loan extends Applet implements ActionListener
// Declare the vars
TextField txtAmo;
TextField txtRat;
TextField txtMon;
TextField txtPay;
Button btnCal;
public void init()
//set the layout of the textfields, layouts, and the big o butotn.
setLayout(null);
txtAmo = new TextField (25);
txtRat = new TextField(5);
txtMon = new TextField(6);
txtPay = new TextField(8);
btnCal = new Button("Calculate");
txtAmo.setBounds(145,25,80,30);
txtRat.setBounds(145,65,80,30);
txtMon.setBounds(145,105,80,30);
txtPay.setBounds(145,145,80,30);
btnCal.setBounds(145,200,80,30);
//add all to applet
add(txtAmo);
add(txtRat);
add(txtMon);
add(txtPay);
add(btnCal);
btnCal.addActionListener(this);
//Create graphics for the applet
public void paint(Graphics g)
// simple text displayed on applet
g.setColor(Color.white);
g.fillRect(0, 0, 500, 500);
g.setColor(Color.blue);
g.drawString("Bank of America Loan Calculator", 145, 20);
g.setColor(Color.blue);
g.drawString("Loan Amount",30,35);
g.drawString("APR (%)", 30,75);
g.drawString("Months to Repay",30,115);
g.drawString("Monthly Payment:",30,155);
//Adding image method
Image money;
money = getImage(getDocumentBase(), "money.jpg");
g.drawImage(money, 300,50, this);
//Action Performed
public void actionPerformed(ActionEvent ae)
//Declaring the vars needed.
//try
DecimalFormat money = new DecimalFormat("$#.00");
double a = Double.valueOf(txtAmo.getText()).doubleValue();
double r = Double.valueOf(txtRat.getText()).doubleValue();
int m = Integer.parseInt(txtMon.getText().trim());
r=r/1200;
//The math of the monthly payment
double p=a*r/(1-Math.pow(1/(1+r),m));
txtPay.setText(""+money.format(p));
/*catch(ArithmeticException error)
//Find option for java.awt
//Adding some error messages for the technology inleterates.
Sorry I had to display the code, but I don't know how to do attachements

javax.swing.JOptionPane.showMessageDialog(null, "Message here");

How do I record message for voicemail? When I hit record button, Suri pops up

How do I record my outgoing message for voicemail? When I choose "custom" then "record" Suri pops up.

Wow...
What do expect when recording with a seventy-five cent microphone into a two dollar built-in audio chip by a person with little or no audio recording experience?
Logic cannot perform magic.
Most users who want good (or even adequate) sound purchase external hardware which means a professional or semi-pro audio interface and at least one good microphone. Then they study or read up on best how to mic an acoustic piano. (and that's just for starters)
To answer your question, it sounds like it in a tin can because:
1. Too much room sound causing phase problems. Sound waves are bouncing off different walls, ceiling and reaching the mic at different times and canceling out some frequencies.
2. Mic placement, it needs to be closer to the piano, preferably the back of the piano. The closer to the piano the mic is the less room sound you will pick up.
3. The built-in mic isn't helping... obviously.
You could've used Garageband or any number of free audio programs and gotten the same results.
Logic is a professional (or was) audio program designed to be the centerpiece of a digital audio studio but it can't make a bad recording sound good... it may be able to improve it a bit but the biggest difference will be made by educating yourself on proper recording techniques and purchasing a decent audio interface and microphone.

Pop up message for pending sales order.

My requirement is whenever a zgor sales order is being created for a particular material,if a pending sales order exists for the same material,the message should pop up : "number of sales orders pending for the given material",
Pls help me how to write coding for this to deliver a pop up message.

Hi,
You need to find the correct exit for your req. se38 -> sapmv45A-> INCLUDE MV45AFZZ and check the triggering point before saving the sales order . Write your necessary POPUP code..
Regards,
Kumar.

Pop Up message for Contract expiration dates

Hello, Experts,
I am looking for a way to customize (If it's possible) a message as a pop-up.
The message I want to become a pop up is the message about the expiration
date of a contract, which is displayed when creating a SC from an expired contract.
Thank you for the help !
Regards,
Rami Kleiman
HP

Hi
Contracts can be monitored by scheduling jobs so that Buyers get notification on fund / valid period by .bbp_contract_check
contracts validity / fund can be indeed refered while shopping cart turn to purchase order.
Hope you could have refeered Ricardo article on this
http://wiki.sdn.sap.com/wiki/display/SRM/Contractvalidationdoesnotoccurwhencreatingashopping+cart
Muthuraman

How to create a verification pop-up message for queries executed on Web

I have implemented the function RRMS_MESSAGE_HANDLING in my customer exit variable code for step 2 in the customer include ZXRSRU01. I am able to get warning and error messages to appear in Bex Excel queries, but not queries executed on the Web. I have also tried implementing these queries in a Web Template which allows system messages and warning messages, but still these messages are suppressed.
Is anyone aware of how to create warning messages that appear both in Bex Excel and Bex Web queries?
Thanks for you help,
Curt Timmerman

On the Comments screen, just select the notes tool to add the note. When you are done, click to close the note.

When i drag an item to trash, the pop up message to confirm delete appears. But my trash icon does not show it being full.

Hi
IN my HD/ desktop, whenever I drag an item to the trash, instead of the usual trash icon appearing "full" (ie with trash inside), I get a message confirming me to empty trash.
How do I revert to the usual of the trash icon appearing full and allowing me to drag files out and then decide.
Thanks!

dvp2012,
See the X Labs -> http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Pop up message for Data loss

Dear All,
In CRMD_ORDER transaction we have added new custom tabs using CRMV_SSC transaction but not using EEWB. Now when I go to change mode and do some changes there and click BACK it does not give me pop up ( Do you want to save? Data loss...) before leaving the transaction. When I did some R&D on that I feel that the data from these custom fields are not updated in the buffer to set the Update flag which triggers the Data loss pop up before going out of the transaction.
Please let me know how I can achieve this.
Thanks a lot!!!

This is for Change request in CRMD_ORDER.
Thanks!!

How to configure a pop up message when creating an appraisal?

Hi All,
I have a question.
When the supervisor creates an appraisal for an employee, the supervisor is obligated to create Objectives for the employee but creating Competencies are only optional for executives (people group). When the supervisor has finished creating the appraisal and wants to review it, he will need to click on a Continue button.
When the continue button is pressed, a warning pop up message will appear if the competencies created was null. As it is only a warning pop up message the supervisor can just click ok and continue to the review page.
Now I am needed to configure this pop up message for the appraisal creation page and I would like to know how do I go about in searching for it? Should it be in the OAF java files or is the pop up message can be configured using personalization? I just want to know how to search for the configuration of this pop up message. Thank you
regards,
Ilham

Hi Sheela,
Though you made 'Dataline' field as mandatory, system will throw an error message and will put MOUSE CURSOR on that missing field. So ultimately user would come to know that a particular field is missing.
And in SAP there would be lots of mandatory fields and it's really not feasible to put pop-up messages for such requirements and that too in transactions like CMR.
Tell user that system will automatically put MOUSE CURSOR on a particular mandatory field anytime anybody misses to maintain it. As a SAP consultant, your job is to convince the user with such standard functions.
If at all you want to put pop-up message for it, then you need to go for User Exit development.
Revert back if any further issue.
Regards,
Anup

Need pop up message if vendor Credit note is already posted.

Dear All
I am from account payable department.
While processing the Credit notes for a particular vendor even if the Credit note is already posted in SAP. we do not receive any pop message informing the processor that the credit note is already booked, as we get pop up while processing the invoices which is already posted.
Kinldy assist me how can i set the SAP sytem so that i get a pop up messages for credit note also

You can maintain the contract in source list. On creating purchase order you can go to environment-source list---there you will see the contract number, item number and validity. If the requirement is to see the contract number and item number can be done in this way without any enhancement.
REgards
Sangeeta

Ask for confirmation does not prompt - automator help

Hello everybody,
I wrote a simple application to mount the Media folder of my NAS. The first step is asking for confirmation as I want to make sure I am at home when my NAS is available and I do not want to continue the script when I am at work for example. Everything works fine when I test it insde automator.
I then tried to save the script as application and put in my Login items.
So when I start up I can see the little gear on top turning but there is not pop-up asking for confirmation. The script just get stuck.
Anybody know what might be the problem? When I run the application normally by clicking on it everything goes as it shoud but if it's in Login items it gets blocked at the first step and never even ask for cofnfirmation
Thanks a lot

Hi,
Is the "Hide" checkbox is checked in "System preferences" --> Accounts--> "Login items" ?
If it is checked, uncheck it.
If it still doesn't work, try this:
Remove the asking for confirmation action
Insert the "Run appleScript" action, cut all text in the action
Copy/paste this text in the action:
on run
activate
display dialog "Do you want to mount the Media folder of my NAS?"
end run

Adobe reader first pop up message in 10 version

hi everyone,
previously i have installed pdf reader9 version, because of some problem i have not able to open some specific pdf file so i reinstalled with pdf 10, now file is opening properly, when i was opened first time i got some pop up message in pdf 10 by mistakenly i clicked ok without reading it, i need that pop up message for feature reference can anybody tell me what is that pop message

No one can know what the message is. You can try to reset warnings in the Preferences->General Pane and see if it re-occurs.

Pop up message for confirmation in standard bsp on approve button

Similar Messages

Maybe you are looking for