Pop Up Screen to edit mail before sending

Hi,
User wants to check the mail content before sending mail.
So he wants a pop up screen when he press save button in one customized T-code.
All the mail contents should appear in that pop-up screen where he can edit the mail content, i.e. he can change the content of internal table which is to be passed to function module to send the mail.
Thanks,
Vaibhav

Got answer

Similar Messages

Cannot open Word document attachment in mail before sending.

Cannot open Word document attachment in mail before sending.
In Snow Leopard Mail 4, (Version 4.0 (1075/1075.2)) if I attach a word document to a message and, BEFORE sending the message, I double click the attached document to open it, to make sure it is the right one, I get the error "Mail was unable to save the attachment “Test.doc” to disk. Verify that your downloads folder exists and is writable."
The attachment is mailed correctly and arrives at the destination, but the ability to verify an attached document before sending it is essential. This has worked fine in all previous editions of OS X.
Any ideas?
Thanks - Lawrence

I have same problem. I've done the following testing to pinpoint where the problem lies and there are clues (see below):
1. My machine had SnowLeopard installed "fresh" (i.e. disk reformat and installed cleanly)
2. I have a comparison machine running Leopard (10.5.6) - essentially a mirror but with different OS
3. Problem is triggered when creating new email, with a MS Word .doc attachment added. If you attempt to open the attached file in the mail (not yet sent) it produces the error message "unable to save file XXX.doc to disk. Verify that your downloads folder exists and is writeable"
4.However, once the mail is sent, the recipient can open the attachment without problems.
5. I have run Disk Utility and all permissions are correct. My downloads folder exists.
6. The problem is not present in Leopard (mirror machine other than OS)
7. I have uninstalled and reinstalled MS Office. Problem still present
8. I have deleted and recreated the preference files for both MS Office and for Mail. Problem still present.
And finally...
9.The problem is confined to .doc files.It works fine for .pdf, .ods AND even for Microsoft .xls files.
So it may be a MS Word problem triggered by Snow Leopard?
Apple: if you can confirm this is a Microsoft problem it may be able to be reported to them as a compatibility issue?
Hope this helps.

Check mail before send

Hello. I have a problem. I'm new with Apple world. Until now I used like Email client Pegasus Mail on PC. My ISP needs for using the smtp server to check email before send it. On Pegasus there was the flag to use it. On AppleMail I found nothing. I can't send mail.
So I'm asking if there is a way to make the login to a pop before use the smtp.
(do a prior POP3 login to authenticate before sending mail)
Checking manually doesn't work.
Many thanks and best regards.

This question about the so called "pop before smtp" authentication occurs every then and now. However, nobody every posted a "solution" for Apple's Mail.app. You can use an alternative third party client (e.g. Thunderbird) or change your provider (or tell your provider, that a thing called "asmtp" exists, and there is no need for pop before smtp any more).

Any way to make Mail.app receive before send?

I work at an ISP and we have a customer who is outside of our range, using Mail.app to connect to our POP3 server.
Normally we have them use their provider's outgoing mail server, and our incoming mail server since our mail server rejects e-mails originating outside of our IP pool. Usually this works.
However, the customer's provider blocks use of their outgoing mail server if the e-mail address is from a different domain.
The one solution would be to have Mail.app receive (and thus authenticate with our mail server) before sending.
Is there any way to do this?

Are you talking about POP before SMTP authentication and if so, are you saying the account must check the incoming mail server for new mail immediately before sending mail with the account's SMTP server and this must occur each time before sending mail?
I thought when POP before SMTP authentication is used/required, checking the incoming mail server for the account at least once per online session is all this is required, not each time immediately before sending mail.
There is no setting to do so in Mail but you can manually select Get Mail before sending a message if I'm understanding this correctly.

Edit an EDI File before sending it

Hi Experts,
how can I found the EDI File generated for a SHPMNT and edit it before sending it ?
User create an outbound delivery and transport. By saving the transport we create/edit the EDI Message SHPMNT (with user-exit) but don't send it. It will be send by using a Z-Programm which made the Good Issue.
The probem is following: After saving the transport, the user want to modifiy, for example, the Shpg.Cond. into the Out.Delivery Head. How can I actualize the EDI Message with the new value of Shpg.Cond. ???
Regards,
David

Hi Vinod,
thanks for your quick answer.
We have 1 EDI File for 1 SHPMNT. But 1 SHPMNT may contain several Outb.Deliv. with the same Ship-to-Party...
I found the Function EDI_DOCUMENT_OPEN_FOR_EDIT with EDI_DOCUMENT_CLOSE_EDIT.
How can I find the Idoc No. of the EDI-File???
Regards,
David

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

Edit a mail message before sending

How do I edit an email in Mail while spell-checking? Sounds simple, but my stupidity means I can't find out how to do it.
Here's my scenario: I write a message, hit send and it brings up the spellchecker. Then while doing the spellcheck, I realise that I want to add or alter something in the email. So I come out of the spellchecker, either by closing it or just clicking on the body of the message, and try to edit the email. But when I then click in to the text I want to change and hit a key, any key it seems. the email just sends - doesn't give an opportunity to make those changes.
This has to be something so obvious that I will cringe with embarrassment when I read the answer, but I hope someone will take pity on me and give me the answer!
Thanks to that person!
BTW, the thing is I only started using Mail a short while ago, having been a confirmed Thunderbird user...
Ian

Hi Lavakumar,
Based on my knowledge, getting an alert before sending messages can't be achieved by Exchange Server.
I would like to know what your purpose is. If you want to avoid users from sending wrong messages, recall feature can help them when they send wrong messages.
For more information about recall, here is a helpful thread for your reference.
Recall or replace an email message that you sent
http://office.microsoft.com/en-us/outlook-help/recall-or-replace-an-email-message-after-it-is-sent-HA010354931.aspx
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Can I remove hard drive before sending T60 for screen repair?

My screen started developing a thin blue line down the center. At first it only showed up occasionally, and then one day it never went away. It only shows up when the screen background is dark, not white like working with Microsoft Word, etc.
A friend who knows a lot about computers hooked it up to an external monitor and said since the line didn't show up on the monitor, it's probably a screen issue not a graphics card issue. I called Lenovo and an super great CSR said since the laptop is still under warranty, I can send it in to Lenovo for repairs.
I'm happy to do this because even though the line doesn't really interfere with the computer's performance, it is annoying to look at. However, I'm just a bit worried about sending my laptop via snail mail to a repair center (I've never had to do that with any electronic before thank God, least of all my Thinkpad that's generally permanently attached to me).
I asked the CSR if he'd recommend backing up my data - mine's mostly backed up onto an external, but I don't have it backed up anywhere else but the external and there are probably some files that I missed. Also I have sensitive information, passwords etc saved and I was just a little nervous about sending it in the mail because of that. The CSR said not to worry, since he thinks it's a hardware issue and he recommended that I just remove my hard drive before I mail it in. Before I ask my computer tech friend to help me out with that, I just wanted to double check that removing the hard drive before sending the laptop into Lenovo for repairs won't cause any problems.
Thanks so much - I've always been happy with my laptop.

Don't worry -- they are used to people shipping laptops without the hard drive. They just stick their own hard disk in to test that everything is working.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Just upgraded to Yosemite 10.10.2 on my iMac 24 inch and now my Suddenlink POP email account won't accept messages. The message says unable to receive Mail and the warning says: Mail cannot send your password securely to the server. You can remove th

Yesterday I uploaded Yosemite 10.10.2 thinking it was fixed by now. In Mail, my POP account gets this error message: Mail cannot send your password securely to the server. You can remove this restriction in the Accounts preferences by setting “Allow insecure authentication”, which could put your password at risk.
My provider says it's an Apple issue. The gmail accounts are logging in fine. Any help? Something simple?
Thanks anyone.

Thanks Csound1. That did work and Mail was able to connect to the internet. Green light status. Is it because of my provider that I may never have had secure connections? Is that an Apple thing or do PCs have the same issues? Appreciate your help. I'll research insecure connections as I am ignorant of the consequences.

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How do I fix this error "An error occurred while sending mail. The mail server responded: Authentication is required before sending [R0107005]. Please verify

My previous request had an incorrect email. This error began yesterday and I can't reply or send new emails from my PC, but email is working on my iphone.

I have been doing that. Here is the complete message I get. It was cut off in my initial question. "An error occurred while sending mail. The mail server responded: Authentication is required before sending [R0107005]. Please verify that your email address is correct in your Mail preferences and try again."

How do I edit the font and bold text in the message box in adobe send before sending to client?

How do I edit the font and bold text in the message box in adobe send before sending to client?

Hi BRAEWOOD DEVELOPMENTS,
You can edit the Subject & Message when you've selected Send Personalized Invitations (though you can't change the font or style of the text).
Best,
Sara

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p? How do I maintain the highest quality?

No...ProRes is a high quality format. Finishing format. Many TV networks take that as a final deliverable.
BUT...DVDs aren't high definition...they are SD. You cannot make a 720p60 DVD with DVD Studio Pro. Any DVD you make will be SD...720x480. The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

HT1212 my iphone'"s screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do

my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do

Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149.

After hotmail come up on my screen I am not able to open mail or send mail?

After hotmail comes up on my screen I cannot open mail or send mail. I can send mail on google?

I downloaded installed firefox 9 even restarted my computer but still not able to open or send mail using hotmail. Also, when i open WGT.com to play golf I also cannot go to the play game screen.
any more suggestions?
Pat

Pop Up Screen to edit mail before sending

Similar Messages

Maybe you are looking for