Pop up using PL SQL Toolkit

Hello there :
Is there any way we can create a pop-up window using PL/SQL Toolkit.
Thanks for the help.
Regards,
Mohit

using ApEx forum may be more efficient for PL/SQL Toolkit -> Oracle Application Express (APEX)

Similar Messages

I want to use the SQL Toolkit of NI and SQL Server as my databasis on a server. Do I need to install a client in each computer I want to handle the data into SQL tables or I need only a ODBC driver?

I want to use the SQL Toolkit of NI and SQL Server as my databasis on a server. Do I need to install a client in each computer I want to handle the data into SQL tables or I need only a ODBC driver?

You only need the ODBC driver on each computer. If you are distributing the SQL Toolkit app as an executable and do not install the whole toolkit on each computer, you'll need the SQL Toolkit support files. This is about a dozen files. You can get the list at http://digital.ni.com/public.nsf/websearch/b814be005f9da9258625658700550c75?OpenDocument.

Downloading BLOB to a file using pl/sql toolkit

Created an Oracle Reports RDF file using the reports builder (9.0.2.x).
Uploaded the file into the database in a BLOB column using the following code:
>>>>
SET VERIFY OFF
DECLARE
p_bfile BFILE ;
p_blob BLOB ;
BEGIN
p_bfile := BFILENAME('CDR_REPORTS', '&1') ;
INSERT INTO RPTIDE (RPTID, RPTMODULE) VALUES ('&1', EMPTY_BLOB()) RETURNING
RPTMODULE INTO p_blob ;
DBMS_LOB.FILEOPEN(p_bfile, DBMS_LOB.FILE_READONLY);
DBMS_LOB.LOADFROMFILE(p_blob, p_bfile, DBMS_LOB.GETLENGTH(p_bfile));
DBMS_LOB.FILECLOSE(p_bfile);
COMMIT ;
END ;
<<<<<
Now when we try to download the same file using pl/sql web toolkit (code pasted
below), the file downloads fine (with exact same file size as before), but no
longer can open the file in Reports Builder anymore. Get "Cannot open file"
error in reports builder. Is it getting corrupt or am I doing something wrong?
>>>>
CREATE OR REPLACE PROCEDURE filedownload(p_rpt IN VARCHAR2) AS
p_file blob;
p_mime_type varchar2(50);
p_offset integer := 1;
p_len number;
p_buf RAW(32000);
p_buf_size integer:= 32000;
BEGIN
SELECT rptmodule, 'application/x-zip'
INTO p_file, p_mime_type
FROM rptide
WHERE rptid = p_rpt ;
OWA_UTIL.MIME_HEADER(p_mime_type);
p_len := DBMS_LOB.GETLENGTH(p_file);
WHILE p_offset < p_len LOOP
DBMS_LOB.READ(p_file, p_buf_size, p_offset, p_buf);
HTP.PRN(UTL_RAW.CAST_TO_VARCHAR2(p_buf));
p_offset := p_offset + p_buf_size;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN HTP.PRN('No document specified') ;
WHEN OTHERS THEN HTP.P('filedownload: '||SQLERRM);
END filedownload ;
<<<<<

The answer to this problem was to set the NLS_LANGUAGE for the DAD to an 8-bit character set since the database charset was 8-bit. It seems, by default, the web toolkit assumes a 7-bit character set.

How to save datas automaticly making use of SQL Toolkit ?

Hello !
I have amounts of datas to be saved automaticly,so I want to use database.I've registered ODBC data source in my computer.
As the test datas are saved automaticly,I only write a function to save the datas into database.
//write datas into database
void WriteYBdata(char* FileName)
char *time1;
char *date1;
char date[27];
int hstmt,id,status;
date1 = DateStr ();
time1 = TimeStr ();
Fmt(date,"%s<%d[w4p0]/%d[w2p0]/%d[w2p0]",date1,time1);
hstmt = DBActivateSQL (hdbc, "SELECT * FROM ybdata");
DBBindColInt (hstmt, 1, &id, &status);
DBBindColChar (hstmt, 2, 27, date, &status, "");
DBBindColFloat (hstmt, 3, &CH4, &status);
DBBindColFloat (hstmt, 4, &CO2, &status);
DBBindColFloat (hstmt, 5, &O2, &status);
DBBindColFloat (hstmt, 6, &CO, &status);
DBBindColFloat (hstmt, 7, &H2S, &status);
DBBindColInt (hstmt, 8, &TEM, &status);
DBBindColInt (hstmt, 9, &HUM, &status);
DBCreateRecord(hstmt);
DBPutRecord(hstmt);
DBDeactivateSQL(hstmt);
void WritePSMdata(char* FileName)
char *time2;
char *date2;
char date[27];
int hstmt,id,status;
date2 = DateStr ();
time2 = TimeStr ();
Fmt(date,"%s<%d[w4p0]/%d[w2p0]/%d[w2p0]",date2,time2);
hstmt = DBActivateSQL (hdbc, "SELECT * FROM psmdata");
DBBindColInt (hstmt, 1, &id, &status);
DBBindColChar (hstmt, 2, 27, date, &status, "");
DBBindColInt (hstmt, 3, &wy_voltage,&status);
DBBindColFloat (hstmt, 4, &zy_y1, &status);
DBBindColFloat (hstmt, 5, &zl_i1, &status);
DBBindColInt (hstmt, 6, &wx, &status);
DBBindColInt (hstmt, 7, &wg, &status);
DBBindColInt (hstmt, 8, &ws, &status);
DBCreateRecord(hstmt);
DBPutRecord(hstmt);
DBDeactivateSQL(hstmt);
I connect the database in the main function.
I've been debug the program and it communicates normally, but it does not save datas into the database.
The attachment is my program.It is my first time to use SQL Toolkit and I'm not familiar with it. I would appreciate it very much if you could give me some help..
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.
Attachments:
Sava All Data.zip ‏37 KB

Hi !
Thank you very much for your reply.
That line I want to set the time format and it could use the funtion
DBBindColChar (hstmt, 2, 27, date, &status, "");
I do not know it is right or wrong.I could not see any response in this line.
My original idea is recording the date and time when saving the datas.
Would you have any good idea according to it ?
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

Capture mail with Attachment from POP server using PL/SQL

Hey guys,
With the help of this forum and Billy I am able to capture the email from POP3 server and display it to the user. But my query is how can I get an Attachment from the email using PL/SQL's UTL-TCP method ? Right now it displays some encrypted code.
Thanks.

Hey guys,
With the help of this forum and Billy I am able to capture the email from POP3 server and display it to the user. But my query is how can I get an Attachment from the email using PL/SQL's UTL-TCP method ? Right now it displays some encrypted code.
Thanks.

Fetching Email (POP/ IMAP ) using PL/SQL

Hi,
I am using Oracle 10g database.
I want to fetch emails from a specific email address and save them in a database on a real time basis so that i can fetch them predetermined business logic.
Is is it possible to connect to emails and fetch them using PL/SQL ??
If yest what is the command used to connect / fetch emails ?
Many Thanks
Edited by: user12037243 on Mar 29, 2013 9:05 PM

Hi, Shikhar
Welcome to OTN
Welcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Oracle Forums FAQ
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>How to ask questions the smart way
</ul>
Following these simple guidelines will ensure you have a positive experience in any forum; not just this one!
user12037243 wrote:
Hi,
I am using Oracle 10g database.
I want to fetch emails from a specific email address and save them in a database on a real time basis so that i can fetch them predetermined business logic.
Is is it possible to connect to emails and fetch them using PL/SQL ??
If yest what is the command used to connect / fetch emails ?
How you requirement is related to Forms. Post at {forum:id=75} and close this thread.
Hope this helps
Hamid
Mark correct/helpful to help others to get right answer(s).*

How can I use SQL TOOLKIT concurrently with Database Connectivity ?

I have installed LabVIEW 6.1 with the Database Connectivity Toolkit and the SQL Compatibility Toolkit (e.g. _SQL folder). I am trying to make the transition from the SQL Toolkit VIs to the Database Connectivity toolkits, but for compatability with existing systems I would like to be able to run the two sets of VIs concurrently (but not in the same app).
When I read into 6.1 a connection VI that I wrote with LabVIEW 6.0 and the SQL toolkit the connection reference type gets changed from a number to type connection (see attachments) . Does compatbility mean that my SQL toolkit VIs are converted to a form compatible with the new ADO ?
Can I use the SQL Toolkit VIs or the Database connectivit
y VIs in the same installation of 6.1 ?
Can I have the SQL Toolkit VIs appear on the functions pallette and function as they did when only the SQL toolkit was installed ?
Attachments:
CNNCT.vi ‏20 KB
CNNCT.vi ‏22 KB

In response to your #2 below:
Actually it is possible to have the old SQL Toolkit and new Database
connectivity in the same installation of LabVIEW. I have only tried it on
6i, but don't see why it wouldn't work on 6.1. The trick is not to install
the SQL toolkit compatabitily VI's. The old SQL toolkit uses the Intersolve
dll through ODBC while the new Database connectivity uses ADO so it is
possible to use both methods not only in the same LabVIEW install, but it
the same running application. It has been a while since I originally did
this, so I am posting only to mention that it is possible and not exactly
how to do it. If anyone is interested in more details just respond.
Brian
"Jeff B" wrote in message
news:[email protected]...
> First, direct answers to your direct questions:
>
> 1. Does compatbility mean that my SQL toolkit VIs are converted to a
> form compatible with the new ADO ?
>
> Yes
>
> 2. Can I use the SQL Toolkit VIs or the Database connectivity VIs in
> the same installation of 6.1 ?
>
> No
>
> 3. Can I have the SQL Toolkit VIs appear on the functions pallette
> and function as they did when only the SQL toolkit was installed ?
>
> No
>
>
> Now an elaboration:
>
> Having the old SQL Toolkit and the new Database Connectivity Toolset
> installed on the same version of LabVIEW on the same computer is not
> supported.
>
> Once you install the Database Connectivity Toolset, any VIs written
> with the SQL Toolkit will run, but with the ADO layer, as you
> suspected.
>
> Internally, the only way we can have both the SQL Toolkit and the
> Database Connectivity Toolset installed on the same computer for
> troubleshooting customer issues is to have them installed on different
> versions of LabVIEW. I, for example, have LabVIEW 5.1.2, 6.0.3, and
> 6.1 all installed on my computer, and I have the SQL Toolkit install
> on LabVIEW 5.1.2, and the Database Connectivity Toolset installed on
> LabVIEW 6.0.3. In this configuration I can still run SQL Toolkit VIs
> independent of the Database Connectivity Toolset if I open and run
> them in LabVIEW 5.1.2.

How to access SQL server using SQL toolkit from LabVIEW

I 'm using Labview SQL toolkit to read from data base
it is Okay for dBase but for SQL server we couldn't
as we could read only the numeric fields but no longer for character fields

Check to see if the text fields are defined as nvarchar or nchar. If I remember right, the old toolkit had some problems with these data types.

How to compact and repair a MS Access database with NI CVI 8.5 (and SQL Toolkit)

Hello
I'm using the SQL Toolkit with CVI 8.5 for accessing MS Access Databases.
Is there a possibility to compact and repair the .mdb file with CVI?
Thanks in advance.

Hello Ulrich,
with compact and repair I mean the MSAccess function "Compact and Repair".
Please follow the link below for more details:
http://office.microsoft.com/en-us/access-help/compact-and-repair-an-access-file-HP005187449.aspx
Normally you can execute this function directly in Access or with the Windows ODBC Data Sources Administrator => "Control Panel" => "Administrative Tools" => "Data Sources (ODBC)"...
I want to execute this function via cvi code and not by hand ;-).
Thank you for your support.
Frank

PL/SQL TOOLKIT + STORED PROC / APEX VAR

Hi guys,
i can't find a good example on how to use pl/sql toolkit with var taken from the page or stored proc:
An example. I want to build a thumbnails of img:
Let's say i use this to build my image grid:
for x in 1..5 loop
htp.p('<table border=1><tr>');
for x in 1..5
loop
htp.p('<td>a</td>');
end loop;
htp.p('</tr></table>');
Now how i would like to use a code as follows to
<img src="#OWNER#.display_thumb?p_photo_id=' (PHOTO_CATALOG_ID,80) || ' "/ WIDTH=100 HEIGHT=100>'
Assuming that all my code is working how should i rewrite the <td>a</td> tag with an img src tag
a)htp.p
b)htp.img
Other question: is apex developed using pl/sql toolkit?
Thanx a lot for this
Message was edited by:
Marcello Nocito
Message was edited by:
Marcello Nocito

Hello,
The following is the best place to start if you are interesting in creating new pages using the web toolkit. Pay special attention to the initialization and ending statements Scott is using - http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
Hope this can help,
Arie.

AXL SQL Toolkit - What can I do with creates *.response file?

I used AXL SQL Toolkit with sample.xml input to generate sample.response file with needed data. How now I can open created file with readable view? Thanks

It's a simple text file.. you can open it with any text editor (e.g. notepad on windows.. or vim on linux).
However, I'd recommend that you use the axlsql toolkit just as an example of how you do sql via axl.. and use it as a starting point for your own application. I built my own GUI based sql tool which works a bit like Microsoft's SQL tools - in the end I think that's what every programmer looks for and the axlsqltoolkit is way too clumsy to be used efficiently.

Help, Cannot connect to ODBC database using SQL Toolkit!

Hello All,
I am toying around with the SQL Toolkit evaluation (2.2 + the patch) and I am having difficulty.
I ran the example program "connect" and it seems to work fine.
However, I try to write my own program and I keep getting the same message:
"Function DBConnect: (return value == -10 [0xFFFFFFF6]).
Native error code - 2147467259 0x80004005
The message differs from time to time, but the return value is constant.
I am using both Microsoft SQL Server 2012 and MySQL.
For MySQL I have installed the latest ODBC connector, 5.3.4. Inside the Control Panel/Data Sources(ODBC), I have a DSN named test_mysql in both User DSN and System DSN.
I ran a test on the connection and the test passes. I am not sure if I should use the ansi or unicode driver, I have tried both with the same success.
I am not sure I had configured the SQL Server connection properly, and will attempt that again.
My CVI Code is simple enough:
hdbc = DBConnect ("DSN=test_mysql");
Every time I get a -10 from DBConnect. Either I have something configured wrong or I am missing something.
Does anyone have any suggestions?
Veni Vidi Duci
Solved!
Go to Solution.

Update 2:
After getting off the phone with Tech Support the problem has been identified!
LabWindows SQL toolkit requires 32 bit DNS. My PC is a 64 bit, so my DNS manager defaulted to 64 bit.
I needed to use the 32 bit DNS manager when working with the toolkit.
Once I created my DNS connections using the 32-bit version of the ODBC Datga Source manager, everything worked fine.
See this tech note:
http://digital.ni.com/public.nsf/allkb/E7984C0DA0F0E65086257694005B4CB7
Veni Vidi Duci

Data to sql server using labview and labview sql toolkit

Hello everyone,
I am using mssqlserver 7.0, labview 6.1 and labview sql toolkit.
I am getting error while i try to store (large) data of size more than 4000bytes. Has anyone come accross such problem .
Looking for your solutions or suggestion for the
above said problem.

Check if the threshold is actual 4095 or 4096.
If so it is probably a default size of the field you are trying to write. If so, change table properties.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I give my application to client? I work with Access 97 and use SQL Toolkit 5.0. NI must sell one license to client for distributed this application.

Thanks,
Jorge.

Hi Dennis,
But I must install SQL Toolkit 5.0 for execute my application (.EXE), in other hand my application generate errors. But I can't give an installer application to client, if is neccesary install SQL Toolkit.
Thanks for your time,
Jorge.

Why do I get a class conflict between the Prepare SQL.vi and the Get Column Name.vi with the SQL Toolkit compatibility vis from the Database Connectivity Toolkit?

I have done extensive programming with the SQL Toolkit with LabVIEW versions through 6.1. My customer now wants to upgrade to Windows 7, so I am trying to upgrade to LabVIEW 2009 (my latest purchased version) using the Database Connectivity Toolkit, and the SQL Toolkit Compatibility vis. Everything seemed to be going okay with the higher level SQL operations, but I ran into trouble with the Get Column Name.vi.
The pictures below show the problem. The original SQL Toolkit connected the Prepare SQL.vi with the Get Column Name.vi with a cluster of two references, one for connection, and one for sql. The new compatibility vis have a class conflict in the wire because the Prepare SQL.vi contains a cluster with connection, and command references, but the Get Column Name.vi expects a cluster with connection and recordset references.
How do I resolve this conflict?
Thank You.
Dan

I've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
Try to take over the world!

Pop up using PL SQL Toolkit

Similar Messages

Maybe you are looking for