Populate Assignment Field in G/L line item display (FS10N/FBL3N)

Hi All,
I am using FS10N to see G/L Account Line Item Display.
I am seeing the Report Display with Coloumns like Doc.No., Type,Doc.Date,Amount in Local Currency etc etc
There is coloumn showing Assignment.The entries are not getting populated/displayed under the same coloumn of Assignment
When I go to Change Layout I see th Assignment field but the nothing is getting dislayed under the Assignment coloumn when I run FS10N/FBL3N.
How do I solve the above problem?
Thanks
Vivek
Edited by: VIVEK KAPOOR on Dec 11, 2009 4:11 PM

Hi ,
Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
Thanks
Vivek

Similar Messages

  • Populate Assignment field with PO number& Line item in while invoicing

    Hi Gurus,
    My client wants to populate Purchase order number concatinating with line item (4500000000 0100 )in Assignment filed of accounting doument while doing MIRO.
    Thanks in Advance
    Best Regards
    Ashish Jain

    Hi Dominic,
    I want to populate Purchase order number concatinate with line item in Assignment filed of accounting document at time of MIRO. for all line items.
    Best Regards
    Ashish Jain

  • Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

    Steps done:
    1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
    2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
    3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
    4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
    5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
    I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
    Please help. Thanks.
    Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

  • Update material doc.num in assignment field of GR/IR line item of a/c doc

    HI Experts,
    please tell me the solution for my problem
    My requirement : Transaction is : MIGO
    Before posting of material document, update material document number in assignment field of GR/IR line item of accounting document (WE) at number commitment stage
    Update MKPF-MBLNR (Material Document Number) in BSEG-ZUONR
    but already i tried AC_DOCUMENT i got a problem .
    What i did,
    first use MB_DOCUMENT_BADI with method
    mb_document_before_update.
    here i tried to get the material document and export into memory
    after use AC_DOCUMENT With method
    change_after_check.
    here Import the material document doc num and pass it to Assignment field in
    but it is not working
    when i debug first trigger the AC_DOCUMENT And then it goes to MB_DOCUMENT_BADI
    Plese help me regarding this.
    Moderator message: please open only one thread per issue.
    Edited by: Thomas Zloch on Feb 9, 2012

    Hi,
    Thanks, I will check the same. Well, I will be clearing the documents with reference to MIGO number itself. When I do my delivery chrgs migo, that number I need to be populated in my line item's assignment field. Not only that but I the same number should get populated in the delivery charges miro. Since my miro is with ref to PO it becomes difficult to fetch the field.
    Plz let me know if you can help me on this as well.
    Thanks,
    Priyanka.

  • Need Profit Centre,WBS element fields in Customer/Vendor Line item display

    Dear Experts,
    In Standard SAP we do not have the Profit Center, WBS Element in Customer / Vendor line item functionality. Now we need to develop user exit, when User try to post transactions like MIRO, F-02, FB01 system should ask the Profit Center field and WBS Element field in Vendor / Customer line items.
    I dont know the actual functionality, The consultant has given example as 3 transactions, Do we need to update any other transactions also. If yes please provide me the information.
    Can anyone help me with the solution.
    Thanks in advance.
    Regards,
    Abdur Rafique

    I have used User exit, to obtain the above scenario.

  • Assignment field in the document line items

    Hi,
    I have a document where the assignment field is automatically populated with values. May i know where and how these automatic values are determined?
    I have checked the document substitution but cannot find any rules there for this field.

    Hi Raja,
    What kind of documents are these? If they are billing documents, the assignment and reference fields are copied as per the configuration done for SD document copy control. If these docuemnts are uploaded documents or coming through an extenal system, the abap program must be populating these values based on sime criteria.
    Kindly check let us know the kind of documents and how the entry happens.
    Thanks and Regards,
    Anit

  • Customer number needed in "GL a/c line item display" for customer gl?

    Hi SAP Experts,
    while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
    How can i solve this problem?
    Plz guide me.
    I need a quick response.
    Regards,
    Biswa

    Hi,
    Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
    If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
    special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
    I hope these helps.
    Regards
    Ravinagh Boni

  • PO an dPO line item details in FBL3n or FAGLL03 display

    Dear All,
    I have an requirement where in the user is expecting the clearing of GRIR items , for clearing we are using the standard transction code regularly - but what happens every time there will be some uncleared entries due to some reason - now the user is expecting to see the PO and PO line item in the gl display so that he can sort and identify the reason for the same.
    When i see the FBL3n or FAGLL03 display the same is not apperaing and the fields are blank - what should i do to get the PO and PO line item in the display - should i use an enahncement or create a Z report for the same.

    hi,
    in std sap po line item will be updated in bseg tables
    the same info is not availble from BSIS table
    so by defalut we should run GL line item display ,u will have po and poline item fields but with a blank data, now if the same data is to be fetched from BSEG to do this in std SAP we have a concept called a special field, so go to line item display fbl3N and go on top edit menu , we go to cust special fieds where they can be configured.
    config is table name bseg-ebeln and bseg-po line item , once saved , system prompts for TR 2 times,
    thanks
    g.bharathi

  • Add additional items to line item display? (FBL1N, FBL5N)

    Hello everyone,
    I'm trying to add some "custom fields" to Customer/Vendor line item display
    which is only available in BSEG table. (new GL function)
    I could not find any BAdI or something..
    Is there any way to do this?
    thank you in advance for any comments.

    Hi,
         Try with this Menu enhancements,
    FI_ITEMS_MENUE01                                          Menu Enhancement
    FI_ITEMS_MENUE02                                          Menu Enhancement
    For the created Menu item, under that function code write the logic to get the additional data.
    Regards
    Bala Krishna

  • Bal field "Profit Center" in line item 001 not filled at the time of F-53

    We are in ECC6
    I have posted a vendor document.  The entry is shown as under.
         GL                           CC     PC     Segment
    Dr     Expense GL-1     RV01     RGV1     Hyderabad
    Dr     Expense GL-2     RV02     RGV2     Mumbai
    Cr     Vednor a/c               
    but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error. 
    Balancing field "Profit Center" in line item 001 not filled.
    I have check ed the configuration setting in this regard.  Zero balance, mandatory fields for profit center and segement check box is enabled.  And also the inheratence check box is also enabled.
    Pls suggest soulution soon for the above problem.

    Hi,
    Try to default the profit center in FAGL3KEH for the Bank account and try posting.
    In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
    Try to assign a default profit center and check.
    Regards
    Hari

  • Balancing field "Profit Center" in line item 001 not filled in VF02

    Hi,
    While releasing a billing document to accounting, we are getting the following error.
    Balancing field "Profit Center" in line item 001 not filled.
    Let me give more details about this.
    We are in a retail implementation. Transaction combining cash and credit are normal in retail scenario.
    Normally SAP billing document type is RV which does not allow item category 04000 which is cash.
    To counter the above, we have created a document type YV with unspecified posting and assigned to SD document type BV(which is cash memo).
    The billing documents with 2 line items with different profit centres, with SD document type BV when released to accounting is giving this error.
    Any suggestions.

    Hi all,
    This transaction Iam also trying to post in FI directly.
    The entry I am posting is
    Dr   Cash  1000
    Cr   Sales  500       PC X
    Cr  Sales   500       PC Y
    I want the cash account to be split with PC X 500 and PC Y 500. I am getting the same error.
    Can some one please guide. I have assigned cash account with item category  04000.
    Thanks
    Aravind

  • Assignment Number in GL A/c Line Item Display

    Hi Guru,
    In Assignment No column, GL A/c line item display ( FBL3N ) it is showing the Billing Document No same as in Referance No Columnbut not the assignment no,
    but should actually show the Assignment No as per the Billing Document Display VF03, where it is showing correctly.
    Can you please help.
    Thanks
    Mukh

    are you saying the assignment field for the customer entry is correct but for the GL account it is not?
    If that is the case you could either do a mass update of the assignment field from the customer entry to the GL account entry.
    However to correct this at source you need a substution that looks at the customer assignment value and copies it into the GL account entry.

  • Balancing field "Profit Center" in line item 003 not filled during AFAB

    Hello all,
    We have activated business function FIN_GL_REORG_1 on EHP5 in ECC 6.0 and related reporting business function. One of the advantages of activating this for Fixed Assets is now asset balances can be reported at Profit Center/Segment level in sub ledger.
    During executing depreciation, we are getting the below error message
    Balancing field "Profit Center" in line item 003 not filled
    Message no. GLT2201
    Diagnosis
    The field Profit Center marked as balancing is not filled with any value in line item 003, even after document splitting.
    Below configuration is done in our system -
    Document splitting is active with standard variants for FA accounts.
    Segment Reporting is actived under Asset Accounting IMG (under Integration with General :edger Accounting)
    Activation of account assignment objects is active for cost center and specify account assignment types for account assignment objects KOSTL is configured for all transaction types (*) for APC and Depreciation postings is activated.
    APC, Accumulated Dep and Dep expense account field status groups are changed to have profit center and segment as optional fields for inputs.
    After all these settings, I am still getting the above error message.
    Can someone please let me know if you had similar situation and how to resolve this issue.
    Thanks,
    Praveen

    Hi
    Check the below locations
    Fin Accounting(New)Fin A/c Global Settings NewLedgersAssign scenarios and Customer Fields to Ledgers (Here assign Profit Centre)
    Fin AccountingGL Accounting NewBusiness  TransactionsDoc splittingDefine doc splitting characteristics for GL Accounting (Here Profit Centre mandatory check) Check with Activate and Deactivate
    Regards
    Sridhara Rao D

  • In J1IH - Balancing field "Profit Center" in line item 001 not filled

    Dear Sir/Madam,
    Am doing Additional Excise JV in J1IH, when put some amount in AED filed and save getting the error as below
    "Balancing field "Profit Center" in line item 001 not filled"
    If any one have come across this error while doing Additional Excise JV in J1IH please help me in resolving this issue.
    Note : Below points may be helpful for you to help me,
    1. Document Splitting is active,
    2. Profit center made mandatory,
    3. The relevant GL is assigned in item category of classify GL step in Document Splitting process.
    4. Substitution is only for FI documents.
    Regards - Manjunath AR

    Hi
    One way is to maintain a default profit center for the transaction in FAGL3KEH. Else depending on your plant structure, you may write a susbstitution rule as
    T Code = J1IH and Plant =X and G/L = 123221
    Profit Center =200001
    Regards
    Sanil Bhandari

  • MIRO Error - Balancing field "Profit Center" in line item 001 not filled

    Dear Experts,
    Recently we upgraded to ECC 6.0 from 4.6C. We implemented new GL functionality.
    We have also introduced new Profit Centers and have updated the same in Material Master.
    Now, the new Profit Centers are valid from 01.04.2009 till 31.12.9999.
    Now my problem is while doing MIRO after 31.03.2009 for old PO's i.e. the PO's which were created before 01.04.2009 the system gives me error "Balancing field "Profit Center" in line item 001 not filled".
    This is because for the particular line item it picks the profit center from material master, but the validity of that (NEW) profit center is from 01.04.2009 whereas I want to do the posting in back date i.e. for eg. 28.03.2009. Due to which it does not get any profit center.
    How do I resolve this problem. Is there any exit or BADI to do the same.
    Regards...

    Hi
    There could be multiple reasons for this. Pls check on:
    1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
    2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
    IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
    3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
    Pls check the settings. If any doubt, revert back.
    Thanks & Best Regards,
    rahul.

Maybe you are looking for