Populating a message when cursor leaves the current record unsaved
Hi ALL
Can any one please tell me how to do the following.
I have a Custom Form, In that if the user updates a record and does not save it and goes to the next record, it should populate an alert to the user for saving the record.
Or if putting it in different way: If the cursor leaves record not saving after update, then the alert should pop-up. However after doing update if the user directly goes and saves the record, then it should not populate any message.
I have added an alert, but not sure on which trigger to put it rather not sure how to get the record status whether saved or not, so that based on that condition I can raise the alert may be in POST-RECORD trigger.
Some sample code would be a great help.
Thanks
Madhu
Look for Get_Record_Property in the online help. The only property you can read is Status, that's the one you want.
Similar Messages
-
Issue when Kinect Hand Cursor Leaves the Application Screen
Hi Everyone
i have an application in v2. i have implemented the hand cursor and when the cursor leaves the application or when the user stop using hands the sensor takes time to detect the sensor back and sometimes it does not come back.
We updated the VGA Driver to the latest and still we have an issue. we followed the standard by assigning the Kinect to the Kinect region as we did in V1 sdk 1.8.
Our Kinect instance is in a Static Variable so we ca reuse it in other Windows that we created below is my MainPage
this.InitializeComponent();
Generics.Generics.FullScreen(this);
// only one sensor is currently supported
KinectGeneric.kinectSensor = KinectSensor.GetDefault();
// open the sensor
KinectGeneric.kinectSensor.Open();
// set IsAvailableChanged event notifier
KinectGeneric.kinectSensor.IsAvailableChanged += Sensor_IsAvailableChanged;
// set the status text
this.Status.Content = KinectGeneric.kinectSensor.IsAvailable ? Properties.Resources.RunningStatusText
: Properties.Resources.NoSensorStatusText;
// open the reader for the body frames
this.bodyFrameReader = KinectGeneric.kinectSensor.BodyFrameSource.OpenReader();
// set the BodyFramedArrived event notifier
this.bodyFrameReader.FrameArrived += bodyFrameReader_FrameArrived;
// initialize the BodyViewer object for displaying tracked bodies in the UI
this.kinectBodyView = new KinectBodyView(KinectGeneric.kinectSensor);
// initialize the gesture detection objects for our gestures
// KinectGeneric.gestureDetectorList = new List<GestureDetector>();
//set the Region
KinectRegion.SetKinectRegion(this, kinectRegion);
kinectRegion.KinectSensor = KinectGeneric.kinectSensor;
App app = ((App)Application.Current);
app.KinectRegion = kinectRegion;
and we have a viewbox that covers the grid and the Kinect region as detected below
<Viewbox Margin="0,0,-0.2,0" VerticalAlignment="Top">
<Grid x:Name="LayoutRoot" Height="1367">
<k:KinectRegion x:Name="kinectRegion" Margin="0,138,-8.4,10">
we use the view box to adjust our UI automatically on different sizes of the screen. We also have Navigation services which is inside the above grid as depicted below
<DockPanel Margin="551,-57,668,177">
<Frame x:Name="_home" NavigationUIVisibility="Hidden" HorizontalAlignment="Stretch" Source="Default.xaml" Width="1460" Margin="0,12,0,0" />
</DockPanel>
On all other Pages that get navigated to, we dont have Kinect Region because it will inherit from the Frame Pages else we get ourselves with two hand cursors.
If there is anything i have missed please point it out for me
Thanks
Vuyiswa MasekoHi Carmine
Thanks for the reply
you said "we dont have Kinect Region because" how does this differ from how we implement
multi-pages in Controls-Basics? Are you creating new windows?
Yes you are right it does not Differ, we used this Navigation Part in our V1 Application and the it worked nicely. i have pages not window and i just navigate to those pages , because they are hosted in the Frame when the hand is active it can move from
the Parent window and the Child .
we have borrowed the client the sensor i cant actually reproduce that until they finish testing and we can attend to the issue, they just called us and explained, when i was there i was able to do it nicely i think they just need to put the sensor in the
right place.
Carmine if i can just squeeze this other question ,
In V1 from SDK 1.7 ,1.8 we had the push to press that was in the Toolkit which showed a nice purple looking hand , why was that not added in 2.0 SDK ?
Thanks
Vuyiswa Maseko -
How to get highest number of open cursors within the current calendar day
Hi all ,
i need to know how to get the highest number of open cursors within the current calendar day.
Thanks ,823030 wrote:
the issue is my customer is getting the error ORA-01000: maximum open cursors exceeded and we need an sql statment that gets the following values :
-highest number of open cursors experienced in the current calendar day.
-current open cursors
-and maximum open cursorsThis error is rare. It happens when
a) the value of the open cursor parameter is set extremly low (default is something like 1000). Low would be something like 10.
b) <strike>you have many concurrent users(=sessions) and </strike>the application does not use bind values
In this case each select will open a new cursor, instead of reusing it.
c) you have a select that opens a cursor for each line. This can happen with a statement where you have the CURSOR keyword somewhere in the select or where clause. Those cursors will be closed when the select is finished. But during the run time of the select, all cursors stay open.
To track the number of "open cursors" during the day you would need to implement some monitoring. Maybe based on the view that was already mentioned.
Edited by: Sven W. on May 16, 2011 2:30 PM - since the parameter is on session level, other open cursors should not influence it much. -
I have been trying to install Itunes for 3 days to my computer. MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
Microsoft Windows Vista Ultimate Edition (Build 6000)
Dell Inc. Studio 1535
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0020AEDC02A7C4B8
Current user is an administrator.
The current local date and time is 2012-04-17 17:05:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {92497F93-8A79-419C-AA27-50CD2F263F77}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
Description: Dell Wireless 1397 WLAN Mini-Card
IP Address: 192.168.0.118
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Tue Apr 17 16:59:28 2012
Lease Expires: Wed Apr 18 16:59:28 2012
DNS Servers: 192.168.20.254
192.168.30.217
Adapter Name: {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-17 17:04:26.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: Optiarc DVD+-RW AD-7640S, Rev HD14
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.This should get your itunes store connection working.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)
Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan -
Message Created time past the current time even accounting for set clock sk
I'm getting the following when sending a message to a WebLogic 10.3 Web Service through OWSM security padding.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<faultcode>wsse:InvalidSecurityToken</faultcode>
<faultstring>Security token failed to validate. weblogic.xml.crypto.wss.SecurityTokenValidateResult@39b53a[status: false][msg UNT Error:Message Created time past the current time even accounting for set clock skew]</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
On server side's TCP/IP Monitor I see the message received has <wsu:Created>2010-07-30T19:34:17Z</wsu:Created> in security header, the timestamp of TCP/IP Monitor showing time of request is 2010-07-30 12:32:51PM.
Seems like the sender's clock is two minutes ahead of server.
How do I adjust to lax the clock precision between client and server. Which side do I set the properties and what are the properties I need to set? ThanksPam,
from what i have gathered while trying to set mine up, the Time Capsule doesn't like other things broadcasting a wireless signal while it is trying to do the same... or at least, the other computers in the area can only recognize one at a time.
So, in your case, you are using your MacBook Pro to wirelessly share the AirCard connection, right? If so, your computer is acting as a router, which means you have two devices trying to connect your computers to the same network wirelessly. I think this is why your computer isn't able to "see" your time capsule wirelessly. What i would recommend for you is to hook up your aircard to a computer that is not used very often, and (if it has a wireless adapter), turn the wireless adapter off. This way, you have only one device doing the wireless connecting (the Time Capsule in Bridge mode), which will direct internet traffic through ethernet to the connected computer.
So, in conclusion, i just don't think it's possible to do what we want to do completely wirelessly. -
Why does my IPhone loss WIFI connection when I leave the room? When other mobile devices stay connected?
I can not send text messages to other IPhones if I do not have wifi or 3G on, the texts are sent as emails.Hey Linders1987,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with Wi-Fi on your iPhone 5. The following resource may provide a solution:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
http://support.apple.com/en-us/TS1398
Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including
- previously connected Wi-Fi networks and passwords
- recently used Bluetooth accessories
- VPN and APN settings
Thanks,
Matt M. -
Why do I get the 'critical stop' sound when I leave the firefox browser. This doesn't happen when using internet explorer?
Do you mean that there is a problem with closing Firefox?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox if you are currently doing that by clicking the close X on the Firefox title bar. -
Dealing with Person column when someone leaves the organization?
We have a list which has a person (people picker) column. This column pulls from (is validated against) several possible sources including Active Directory. If a name cannot be found when adding/updating a record then the following error message
appears in red just below that field:
> No exact match was found. Click the item(s) that did not resolve for more options.
We have a particular record we are trying to update. Per security policy former employees *must* be deleted from AD. Now, however, that the person in the person column of this record has left it is impossible to update his record due to the mentioned
error message. His name won't validate even though he still exists in the User Information List.
How can this be overcome? Is it a configuration issue? It must be possible to update the record of a person who has been deleted from AD; otherwise, this would present major issues to organizations. We are considering using text for person
names instead of system-validated person columns and clearly that would not be Microsoft's intent.
Question originally posted on:
http://sharepoint.stackexchange.com/questions/103803/dealing-with-person-column-when-someone-leaves-the-organization/103949#103949
The given answer indicates an issue with our security policy, but I'm told our policy of deleting (not disabling) AD accounts is fairly standard in the industry. Is Sharepoint not properly equipped to deal with deleted AD accounts? If so, it
would seem to render the people picker useless.I would agree, this is an issue with the security policy (simply disabling users is also quite common, e.g. in case they return to the organization you can simply reactivate their account). But are you also removing the person from the User Information
List within SharePoint?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
My iphone 4 does not ring for messages when i use the handsfree..
my iphone 4 does not ring for messages when i use the handsfree..
iPhone supports A2DP audio streaming. If you have it paired to a handsfree kit that supports this, for example, an in car audio system, and are currently tuned to a source other than the phone, the phone will send the audio for things like text message alerts to the handsfree system, but you will not hear them. This is just the nature of the beast. If you do not intend to use audio streaming from the phone, you may be able to disable this in the in car system. This should not affect Bluetooth calling. There is no option to disable this on the phone itself.
-
How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone. -
Dowloaded OS 6 to iPhone 4s. Get message when deleting email: "The message could not be moved to the mailbox Trash." Any solution?
Update - I deleted/re-added my account. Same issue. Also, no my Exchange calendar won't sync. Issue appears to be on the Exchange server. I see the following errors in my iPhone log:
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x189010
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:22:45 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284a and title Calendar has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:14 unknown CommCenter[32] <Notice>: com.apple.persistentconnection[dataaccessd,1690] is releasing its assertion on PDP context 0.
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)" 0x183be0
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The operation couldnt be completed. (NSURLErrorDomain error -1001.)"
Thu Jun 24 08:23:18 unknown dataaccessd[1690] <Warning>: EAS|Folder with id 046953b97fad3041abac33b9777784fc-da284b and title Contacts has failed to sync 5 time(s) in a row
Thu Jun 24 08:23:23 unknown CommCenter[32] <Notice>: Client [com.apple.persistentconnection[dataaccessd,1690]] is telling PDP context 0 to go active.
Thoughts? -
Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit. Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support was not found. Can anyone tell me why this is happening?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)
Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help. -
In iphoto how to get the gold you delete a photo warning message when you check the box not ask
in iphoto how to get the gold you delete a photo warning message when you check the box not ask
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Maybe you are looking for
-
Catalog id is not getting displayed properly in Foreign Language (French)
Hi All, I have created a web service id for the external catalog and I have assigned the same to one of the user. The name of the web service id is getting displayed properly in the shopping cart creation screen when the language is English. But when
-
Using XSLT "adapter" for invoking a WS with SOAP-ENC array type param.
Hello, I had to write a BPEL process that calls inside it a web service which has as an input an array parameter and as an output, also an array. I already know that BPEL has limitations regarding using the SOAP-ENC Array type. I tried to rewrite the
-
My photo stream is not working correctly. only importing some..help?
my photo stream is only importing some of my photos...settings all seem to be correct..any advise?
-
Credit has not been posted to my account
Hi, I purchaced $10 in Skype credit on my computer before leaving on a business trip to China where i knew i was going to need to use skype to call landlines in the US. Everything looked good and I was pretty confident upon leaving that everything w
-
Actiontec Modem/Rout​er
I have an Actiontec MI424 and it is always giving me problems with dropped connections all day long - it's starting to become a nuisance. I'm talking when the laptop is literally 3 ft away from it (so we're not talking about the signal having to to n