Population of fields in Credit Mangement for Tcode BP in ABAP

Hi,
I need to trigger the BADI when the customer is created and saved so that the fields in the BP will be auto populated when the BADI is triggered.
the fields which i have to populate is in the Credit Profile Tab in SAP credit managenent transaction Code BP
i.e score has to be 80 for all the customers own_rating is the field.
and have to populate 2 other fields risk_class and customer group.
the badi i used is CVI_custom_mapper where i am not finding any above fields.
kindly help me in solving this issue..
<removed by moderator>
fareed
Edited by: Thomas Zloch on Jan 12, 2011 5:26 PM - priority adjusted

Awaiting for your valuable reply

Similar Messages

User Exit for TCode CJ20N to populate Project system user fields

Hi team,
need one support from your side..
I am looking for User Exit for TCode CJ20N to populate Project system user fields on SAVE.
I have found
Enhancement CNEX0001
Short text PS: User field
which is exactly suiting my req...as it has USER Fields (USR08/USR09 )in export paramters..
BUT it is not triggering on SAVE,,
Any hint or is any other user exit/badi which have USER Fields in export paramters.
Warm Regards
Krishan

Hi Krishnan,
If you want a custom tab that contains User defined fields at Project level then you have to use CNEX0006 user exit. Before this you must declare your fields using the CI include CI_PROJ in the PROJ table.
If you want a custom tab that contains User defined fields at WBS level then you have to use CNEX0007 user exit. Before this you must declare your fields using the CI include CI_PRPS in the PROJ table.
In the PBO function module exit of these exits you must use the following statements as the first statement.
MOVE-CORRESPONDING sap_proj_imp TO proj.
MOVE-CORRESPONDING sap_prps_imp TO prps.
In the PAI function module exit of these exits you must use the following statement as the last statement.
MOVE-CORRESPONDING proj TO cnci_proj_exp.
MOVE-CORRESPONDING prps TO cnci_prps_exp.
The remaining programming as in the case any Screen Exit.
Regards,
Abijith

'Components' table field for TCODE - 'COOIS'

Could any one help from which table the following fields are pulled from for the standard transaction COOIS? For Component in List selection field.
Requirement Quantity
Quantity Withdrawn
Requirement Date
Thanks

If you are just looking for the table and field names, you can park your cursor on the field in question and hit F1. So for instance, if you parked your cursor on the Required Date field range and hit F1, you would see this information:
IOOPCOMP-BDTER == Required Date

BDC for TCODE F150

Hi Friends,
I am facing problem while developing BDC for tcode F150. The last action i.e. scheduling for particular dunning date is not getting executed in my BDC.
I am also pasting the end part of my BDC recording. Please review it and advise.
PERFORM bdc_dynpro      USING 'SAPLF150_JOBS' '1000'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'F150V-STRZT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=JOBS'.
PERFORM bdc_field       USING 'F150V-STRDT'
                                rdate.
PERFORM bdc_field       USING 'F150V-XSTRF'
                                'X'.
    select single SPLD into p_out from USR01 where bname = sy-uname.
perform bdc_field       using 'ITCPO-TDDEST'
                                 p_out.
CALL TRANSACTION 'F150'
Thank you,
Swapnil
Edited by: Swapnil Tawade on Sep 22, 2008 3:15 PM

Hi,
   If u want it for some specific plants then before populating data to bdcdata internal table check the conditions for which the plant fields required values to be passed and if the condition is satisfied then pass the plant field to bdcdata table . If the condition is not satisfied then dont pass that plant field to bdcdata table bcoz if u r not passing any field to bdcdata table then that field is going have default values.
Regards,
Shafi

End Routine - populating Target Field based on Master Data

Hi,
I have an issue with my End Routine in BI 7.0. The scenario is as follows....
The Target-Fields ZSALES_OFFICE , 0SALES_CHANNEL etc. are being mapped 1:1 from their respective source fields. In addition to these target fields I have a target field 0SALESORG which I need to populate based on the values from 0COMP_CODE which is an attribute of ZSALES_OFFICE. The values of 0COMP_CODE are 9000, 9001, 9002 and 9003 respectively. The end routine condition needs to be implemented as follows...
For every 0COMP_CODE which has value 9000, 0SALESORG should be populated with the value "EAST". Similarly for every 0COMP_CODE which has value 9001, 0SALESORG should be populated with the value "WEST", for every 0COMP_CODE which has value 9002, 0SALESORG should be populated with the value "NORTH" and for every 0COMP_CODE which has value 9003, 0SALESORG should be populated with the value "SOUTH". I tried the following code but it doesnt seem to work. Could you pls help!!
Thanks,
SD
DATA: it_tab4 TYPE TABLE OF /BIC/PZF31SALOFF,
          wa_tab4 TYPE /BIC/PZF31SALOFF.
    SELECT *
      FROM /BIC/PZF31SALOFF
    INTO CORRESPONDING FIELDS OF TABLE it_tab4.
    sort it_tab4 by /BIC/ZF31SALOFF.
    LOOP AT RESULT_PACKAGE
      INTO <result_fields>.
      read table it_tab4
      with key /BIC/ZF31SALOFF = <result_fields>-/BIC/ZF31SALOFF
      into wa_tab4
      binary search.
      if sy-subrc eq 0.
        CASE wa_tab4-comp_code.
          WHEN '9000'.
            <result_fields>-salesorg = 'EAST'.
          WHEN '9100'.
            <result_fields>-salesorg = 'WEST'.
          WHEN '9200'.
            <result_fields>-salesorg = 'NORTH'.
          WHEN '9300'.
            <result_fields>-salesorg = 'SOUTH'.
          MODIFY it_tab4 FROM wa_tab4.
        ENDCASE.
      endif.
    ENDLOOP.

Replace your select statement ,
SELECT *
FROM /BIC/PZF31SALOFF
INTO CORRESPONDING FIELDS OF TABLE it_tab4.
instead of selecting all the fields , pick only the fields which are required.(one good performance improvement)
SELECT    /BIC/PZF31SALOFF comp_code
FROM /BIC/PZF31SALOFF
INTO CORRESPONDING FIELDS OF TABLE it_tab4.
Remove the line below , this is not required
MODIFY it_tab4 FROM wa_tab4.

Credit Block for released sales order

Dear All,
I have got one issue. There is a sales order which was created earlier say 15 days back. It went into the credit block at the time of saving it. It was released through VKM3 too.
Now when i change any field in the sales order today, it is going into the credit block. We are not changing any value of any of the item. Just maintaining the Billing block in it or remobving the Billing block.
The number of days maintained in the OVA8 are 182. So as per the standard functionality it should not go into the credit block for any change in the sales order like changing the billling date or changing the billing block.
Can you please let me know what might be the reason for this sales order to go into the credit block..??? Any help is very much appreciated.
Thanks and regards,
Vishi.

Dear Vishi
Please check if you have checked the critical fields option.
Credit check against critical fields (fixed value dates)
The indicator controls the critical field check. If the field is selected, the system checks whether critical fields have been changed.
Use
If a check is carried out, the following fields are relevant:
Payment terms
Additional value days
Fixed value date
Note
Use this type of check for sales documents only.

Credit block for Slaes Order on Days Basis

Hi SAP Gurus,
As my client requirement want Credit block for sales order with days basis.For example Customer has credit 5000 and 30 days.Even credit value not exceed on 31st day, But sales order has to block .
Please requesting to all kindly needful for me.

Hi
Check payment terms in Customer master data, billing tab page. We can define payment terms. And if you want to block the customer use dynamic credit check.
Enter 5,000/- in maximum document value in FD32
For Credit management to be working
1. In def of SD type we need to speciy Automatic credit control in the field " Check Credit Limit"
2. In the defination of corresponding item category we have to check the field "Credit Active".
Award points if it is useful
Anil

Org Level, fund center/cost center level restriction for tcodes????

I am looking to see whether org level restriction and cost center/fund center level restriction is possible for certain set of transactions.
I am using USOBX table for this analysis. This table has a check flag field ( same as in SU24) which says whether the Tcode (program) does the authority check for certain auth objects. Example- X (checked but not maintained in USOBT). This table pulls up several authorization objects under the 'X' category. However, when I do the System trace for the same tcode, all the objects (marked as X) are not captured. Instead only a few are captured.
Can we rely on the USOBX data or should we do system Trace for every tcode. I am just pulling a report and not creating roles at this point. So trace is time consuming. But data reliability is equally important.
My objective is to verify whether org level and cost center/fund center level restriction is possible or not for some tcodes.
Do you have any suggestion to achieve this faster (through USOBX or any other means)?
Thanks in advance
Kee

I would suggest you to check USOBX_C and USOBT_C instead of USOBX and USOBT as it will have your customization as well and not just the standard ones given by SAP.
Also when check field is X ...it means the object is checked but not maintained for the t-code as you already said but I am not sure how much it will help you as the they will not be pulled by PFCG when you are creating the role until you change the object to Check / maintain . When you do that the check field will be Y and not X. So basically it is the Y one which you need to see.
Going for trace is time consuming for every t-code and I am not sure if it really needed. When your roles are in testing phase and are tested by the functional team or the team which needs it and if they are missing some object, you can run a trace and find the missing object....
I am not sure on what basis you want to change some field to Org level ...but typically it is done if you want to do segregation of roles based on these org level. There could be various other reasons and it is better to talk to your functional counterparts before changing a field to Org level.
for ex : If you want to segregate on company code, you will create co. code as Org level and create roles for different company code.

Ensure field sequence is correct for data for mutiple source structure

Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
       HEADER_STRUCT            G/L Account Document Header
           LINE_STRUCT              G/L Account Document Line
Source Fields
       HEADER_STRUCT             G/L Account Document Header
           BKTXT                          C(025)    Document Header Text
           BLART                          C(002)    Document Type
           BLDAT                          DYMD(008) Document Date
           BUDAT                          DYMD(008) Posting Date
           KURSF                          C(009)    Exchange rate
           WAERS                          C(005)    Currency
           WWERT                          DYMD(008) Translation Date
           XBLNR                          C(016)    Reference
           LINE_STRUCT               G/L Account Document Line
               AUFNR                          C(012)    Order
               HKONT                          C(010)    G/L Account
               KOSTL                          C(010)    Cost Center
               MEINS                          C(003)    Base Unit of Measure
               MENGE                          C(013)    Quantity
               PRCTR                          C(010)    Profit Center
               SGTXT                          C(050)    Text
               SHKZG                          C(001)    Debit/Credit Ind.
               WRBTR                          AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
       E1FIKPF FI Document Header (BKPF)         <<<< HEADER_STRUCT G/L Account Document Header
               Select Target Structure E1FIKPF .
           E1FISEG FI Document Item (BSEG)          <<<< LINE_STRUCT   G/L Account Document Line
               E1FISE2 FI Document Item, Second Part of E1FISEG   (BSEG)
               E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
           E1FISEC CPD Customer/Vendor (BSEC)
           E1FISET FI Tax Data (BSET)
           E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
       Legacy Data          On the PC (Frontend)
           File to read GL Account info   c:\GL_Account.txt
                                          Data for Multiple Source Structures (Sequential Files)
                                          Separator Tabulator
                                          Field Names at Start of File
                                          Field Order Matches Source Structure Definition
                                          With Record End Indicator (Text File)
                                          Code Page ASCII
       Legacy Data          On the R/3 server (application server)
       Imported Data        File for Imported Data (Application Server)
           Imported Data                  c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
       Converted Data       File for Converted Data (Application Server)
           Converted Data                 c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
       Wildcard Value       Value for Wildcard '*' in File Name
Source Structures and Files
       HEADER_STRUCT G/L Account Document Header
                     File to read GL Account info c:\GL_Account.txt
           LINE_STRUCT G/L Account Document Line
                       File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text     Document Type     Document Date     Posting Date     Exchange rate     Currency     Translation Date     Reference
G/L Account document     SA     20080401     20080409     1.05     CAD     20080409     Reference
Order     G/L Account     Cost Center     Base Unit of Measure     Quantity     Profit Center     Text     Debit/Credit Ind.     Amount
     44000022                    1040     Line item text 1     H     250
     60105M01     13431     TO     10          Line item text 2     S     150
800000     60105M01                         Line item text 3     S     100
     60110P01     6617     H     40          Line item text 4     S     600
     44000022                    ACIBRAM     Line item text 5     H     600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
Curtis

Hi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
          VBAP( Item Structure)
My file should be like this i think
Identification content         Fieldnames
     H                               VBELN      ERDAT     ERNAM
                                      Fieldvalues for header
      H                              1000          20080703   swapna
Identification content         Fieldnames
    I                                   VBELP     AUART
                                      Fieldvalues for item
    I                                  001             OR
                                       002             OR
Is this format is correct.
Let me know whether i am correct or not

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

ABGL Post Credit memo for asset

Hi,
In transaction ABGL (Credit Memo in Invoice Year), I wanted to issue credit memo for price difference in acquisition of asset.
issue background:-
asset bought without PO (F-90), last year 2010
Now we want to post Credit memo for this asset.
Error hit:
Acquisition value negative in area 01.
Message no. AA617
What is this error message mean? How to resolve this?

Hi,
in OADB, our setting :-
Acquisition value = +
NBV = +
Investment grants = 0
Revaluation = 0
Ordinary depreciat. = *
Special Depr. = *
Unplanned Depreciat. = *
Transfer of reserves = -
Interest = 0
Revaluation ord.dep. = 0
I follow your step, i change acquisition value field to "-", it prompt me this message:-
Caution: generic values for real depreciation area (refer to long text)
Message no. AC246
Diagnosis
You set up depreciation area 01 so that all types of acquisition values are allowed. However, this only makes sense for derived depreciation areas.
System Response
Warning message. The system allows the setting, but note that it can lead to undesired effects for real depreciation areas.
Procedure
Check the setting.
I change theAcquisition value + to -?

Partner bank field in Credit memo thru MIRO

Hi
I am trying to post credit memo related to MM invoice in transaction MIRO. I am getting error
select partner bank out of multiple partner bank
but the field is not available for selection. The same is avaialable for input in invoice though. Not coming for credits only.
And if I put invoice reference, should not it take from the original invoice ?
Help
Pushkaraj
I have checked field status, its not suppressed

Hi
I have checked field status for reco account of the concerned vendor. Its optional entry for bank partner. In posting key also its optional.
And Document type for invoice and credit memo is the same one. So just wondering how it is available for input in invoice and not in credit memo.
How did you get that in credit memo as well ? in MIRO transaction ?
Raj
will assign full points

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Create new tab in header using badi ME_GUI_PO_CUST for tcode ME21N

Dear all,
i have implemented method SUBSCRIBE in ME_GUI_PO_CUST to create new tab in ME21N,
but the tab is not coming
following is the code snips, please tell where is the error, or some setting needs to be done
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
if sy-tcode eq ' ME21N' OR SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'.
CHECK im_application = 'PO'.
CHECK im_element     = 'HEADER'.
CLEAR re_subscribers[].
ls_subscriber-name = 'Customer-Data'.
ls_subscriber-dynpro = '0101'.
ls_subscriber-program = 'SAPLMEGUI'.
ls_subscriber-struct_name = 'MEPO_SUBSCRIBERS'.
ls_subscriber-label = 'Customer Data'.
ls_subscriber-position = 10.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
endmethod.
Regards
Sumodh

Hi...I hv similar requirement.
I need to show a custom field in the screen for the items.
I tried using the methods "SUBSCRIBE" and "MAP_DYNPRO_FIELDS" as explained in the sample code.
Below is my code. I have copied the sample code and changed it lil.
Method "SUBSCRIBE":
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element     = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '9000'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLZMMPO1'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZMM_PO_CUST_SCREEN'.
a label can be defined
ls_subscriber-label = text-t01.
the position within the tabstrib can be defined
ls_subscriber-position = 13.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
method "MAP_DYNPRO_FIELDS":
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
*- customer fields
CONSTANTS: mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
LOOP AT ch_mapping ASSIGNING <mapping>.
    CASE <mapping>-fieldname.
      WHEN 'CLMNO'. <mapping>-metafield = mmmfd_cust_01.
    ENDCASE.
ENDLOOP.
I created a function group - "ZMMPO1" and created the subscreen 9000 in that. I placed the custom field in that screen. Tha main program of ZMMPO1 is "SAPLZMMPO1".
I created a structure also - "ZMM_PO_CUST_SCREEN".
I want to know whether this is sufficient to display the tab on the screen or am I missing something.
It is mentioned that the implementation of "ME_PROCESS_PO_CUST" is a pre-requisite.
could you lemme know the process please.
Thanks,
Ram.

I want to set dynamic customer credit limit for a customer

Hi,
I want to set a dynamic credit limit for a customer which should trigger during the time of Sales Order Creation.
Can anyone please let me know the settings one has to do to implement this process in the system ?

Hi Below is the whole process for confign.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Regds
MM

Population of fields in Credit Mangement for Tcode BP in ABAP

Similar Messages

Maybe you are looking for