Popup to submit on url redirect
No one seems to have solved this issue: I need to perform a submit to insert a row into the database then close the popup (e.g. provide feedback).
I've tried a few different things but the basic problem seems to be I can either close the popup OR submit but not both.
Calling popup with standard "CallMyPopup()" url
The "Save and Close" button does a redirect to url: javascript:saveandclose()
In the HTML header I have:
<script language="JavaScript">
function saveandclose(){
doSubmit();
window.close();
</script>
Page template of popup is popup.
Has anyone got this working?
Thanks for any suggestions.
david
I don't understand, what was wrong with your SaveAndClose() function on the popup page?
As I said earlier, that should work fine. There is no need to set flags and write onload's to close the window and stuff.
Update:
Here is an example http://htmldb.oracle.com/pls/otn/f?p=24317:26
Click on the Edit link on any row to get a popup window where you can edit the row.
Click on the Save and Close button on the popup window and it saves the changes to the row, refreshes the calling window and closes itself. Works fine. The code behind the Save and Close button is just as you stated
javascript:{doSubmit('SAVE');window.opener.location.reload();window.close();}Note that sometimes the save process on the popup is not yet completed by the time the calling window refreshes, if you click Reload on the browser to refresh it, it will pick up the updated information. You don't seem to need the calling window to be refreshed, so you should be fine.
Hope this helps.
Similar Messages
-
Is there a way to create a popup to a page in URL Redirect ?
I have a button (also with a report link column) that is doing a URL Redirect to another page in my app. This works fine.
However, some pages I branch to are small forms and a popup of that form would be more appropriate.
Is there any way to create a URL Redirect that redirects as a popup rather than a page navigation? Similarly, can you branch to a popup page with a report link column?
Thanks,
Reid
Edited by: reidster on Jul 30, 2009 7:10 PMWith your help, I was able to create a popup on a report link column using this:
I just added an "a href" around it.
Thanks again!
Edited by: reidster on Jul 30, 2009 10:18 PM
Edited by: reidster on Jul 30, 2009 10:18 PM -
I have a html region with the following code:
<html>
<head>
<title>Report</title>
</head>
<SCRIPT language="JavaScript1.2">
function items()
$s=('BINDTEST1');
function popon(url)
window.open (url, "EasyReportWriter",
"location=1,status=1,scrollbars=1,width=1000,height=700, resizable");
</SCRIPT>
I have a text box item "BINDTEST" that has html element set to:
onchange="items();"
I have a button with a url redirect of:
javascript:popon('http://test/' + items());
When I click on the button, popup window opens with test url but bindtest1 variable is not appended. What am I missing?
Thanks,
Brett
Edited by: 794218 on Sep 12, 2010 8:20 AMThis worked perfectly!
Thanks. One question, what Oracle documentation contains the details such as: document.getElementById
for one to reference? I thought I used to see a Apex developer manual in previous releases and no longer see it with the recent releases. Please clue me in on what Oracle manual/documentation exists for such programming details.
Thanks,
Brett -
Submit Action and Redirect page in Tabular form Column Link
Hi All,
I have a scenario to submit the current page and redirect to another page with the arguments, when i clink on the link which is created using column link in Report Attributes.
I can able to perform the submit action, but redirection is not happening.
Created a column link on non database column by providing
Link Attribute : <a href="#" onclick="doSubmit('SAVE')">#FAM_DET#</a>
Target : Page in this application
Page : 7
Item name : P7_TRAVEL_REQ_ID
item Value: #TRAVEL_REQ_ID#
Item name : P7_TRAVEL_REQ_LINE_ID
item Value: #TRAVEL_REQ_LINE_ID#
Can anyone help me out to resolve this.811598 wrote:
Please update your forum profile with a real handle instead of "811598".
When posting a question here, always include the following information:
Full APEX version
Full DB/version/edition/host OS
Web server architecture (EPG, OHS or APEX listener/host OS)
Browser(s) and version(s) used
I have a scenario to submit the current page and redirect to another page with the arguments, when i clink on the link which is created using column link in Report Attributes.
I can able to perform the submit action, but redirection is not happening.
Created a column link on non database column by providing
Link Attribute : <a href="#" onclick="doSubmit('SAVE')">#FAM_DET#</a>
Target : Page in this application
Page : 7
Item name : P7_TRAVEL_REQ_ID
item Value: #TRAVEL_REQ_ID#
Item name : P7_TRAVEL_REQ_LINE_ID
item Value: #TRAVEL_REQ_LINE_ID#
Remove the link attribute (what you have used there is not the correct way to use this property anyway).
Change the target page to the same page as the report.
Set the Column Link Request property to BRANCH_TO_PAGE_ACCEPT|SAVE.
Create an On Submit: After Processing (After Computation, Validation, and Processing) branch to page 7, conditional on the SAVE request.
If the SAVE request can be triggered by something other than the report link (e.g. a Save button) then use another request value that will trigger the required page process in the link request and branch condition, e.g. BRANCH_TO_PAGE_ACCEPT|APPLY and APPLY respectively.
Note that there is a bug in BRANCH_TO_PAGE_ACCEPT processing in APEX 4.2.3 and a patchset exception must be installed for this approach to work on this APEX release. -
How to do auto URL redirect in sun web server ?
Hi, i need to do auto url redirect in my sun web server. Currently i'm setup some rules for the reverse proxy in obj.conf file and the syntax looks like:
<Object name="reverse-proxy-/test">
<If $internal and $uri =~ "index.html">
NameTrans fn="redirect" from="/" uri="/examples/abc.html"
</If>
Route fn="set-origin-server" server="http://localhost:8989"
</Object>
The situation is:
1) When users browse "*http://localhost/examples/abc.html*" it will redirect to abc.html
2) When users browse "*http://localhost/test*" it will redirect to the localhost admin GUI (http://localhost:8989/admingui/admingui/serverTaskGeneral)
My desire output should be whenever users browse the "*http://localhost/test*" , it will redirect to abc.html page.
the syntax might be wrong. So, anyone knows how to fix this? I'm keep trying but nothing worked. Please help me.Moderator action: Moved from Servers General Discussion.
db -
Need help with URL Redirect in Sun Web Server 7 u5
All I am trying to do is redirect to a static URL and for the life of me I can not get it to behave the way I would expect. I am new to Sun Web Server so I am just trying to use the Admin Console to set this up.
Here is what I'm trying to do:
Redirect from - http://www.oldsite.com/store/store.html?store_id=2154
To - http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Here's what I tried in the console.
Added a new URL Redirect
Set the Source to be Condition and set it to: '^/store_id=2154$' (quotes included)
Then set the Target to: http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
Then for the URL Type I checked Fixed URL
When I tested with: http://www.oldsite.com/store/store.html?store_id=2154 it did redirect as desired
BUT
When I tested with: "http://www.oldsite.com/store/store.html?store_id=5555" it too got redirected to the Target and I can't figure out how this second URL can satisfy the condition to get redirected.
Any help is most appreciated.thanks for choosing sun web server 7
it is simpler if you just edit the configuration files manually
cd <ws7-install-root>/https-<hostname>/config/
edit obj.conf or <hostname>-obj.conf (if there is one for you depending on your configuration so that it look something like)
<Object name="default">
AuthTrans..
#add the folllowing line here
<If defined $query>
<If $urlhost =~ "/oldsite.com" and
$uri =~ "/store/store.html" and
$query =~ "store_id=2154" >
NameTrans fn="redirect" from="/" http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
</If>
</If>
..rest of the existing obj.conf. continues
NameTrans...
now, you can either do <ws7-install-root>/https-<hostname>/bin/reconfig -> to reload your configuration without any server downtime or <ws7-install-root>/https-<hostname>/bin/restart -> to restart the server
if it did work out for your, you will need to run the following so that admin server is aware of what you just did
<ws7-install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname.domainname>
hope this helps -
Set item value at other page via URL-redirect
Hi, I have a button and I want to open a new window with it using an url-target.
</br>
</br>
javascript:window.open ('f?p=&APP_ID.:143:&SESSION.::NO:143:P143_KDT_ID,P143_MESSAGE:&P140_KDT_ID.,&P140_MESSAGE.') </br>
</br>
When I use branching I get an error that there is no page to branch to. I don't understand why. As a workaround I use an url-redirect when the button is pressed, but I'm stuck on getting the current item value into the target page. I tried using $v('P140_MESSAGE') but I can't get the url valid.Jacob,
The problem was that when the HTML for the button is rendered, the value of P1_ITEM from session state was "glued in" to the generated URL at that time. If you then entered a value for the iterm, even though your onChange AJAX technique changed the value in session state it was too late to change the already generated HTML for the button, specifically the URL target for the button.
I created a Set Item2 button on your page with this for the URL attribute:
javascript:window.open('f?p=&APP_ID.:2:&SESSION.::NO::P2_ITEM:' + document.getElementById('P1_ITEM').value);
Let me know if that does what you need.
There is another problem and I don't know the cause. When you click the button, it opens the new window properly but leaves the original page in an error state of some kind. I could not reproduce this in my application using the same js, so I'll be interested in how you solve that.
Scott -
URL redirection config in PI SOAP receiver communication channel
Hi,
I am working on a similar scenario where I my consuming an external web service using https protocol from PI.
I have configured a soap receiver channel to call the target url of this web service as https://portal.xyz.org.uk/webservice_alt.
I am getting an error HTTP 302 suggesting that PI is not able to follow the re-direction to the target URL as the service resides not on that URL but on https://portal1.xyz.org.uk/webservice_alt or https://portal2.xyz.org.uk/webservice_alt.
This is their server fail over handling mechanism which is very common. But PI 7.0 is not able to handle this.
So if I change the target URL on the SOAP receiver channel to https://portal1.xyz.org.uk/web service or https://portal2.xyz.org.uk/webservice_alt , PI works fine without errors . But this is not the right approach because, every time the web service provider takes one of these systems down for upgrade/patching etc, they inform us and then I manually go and change the target URL to the available server on my production PI system config.
My problem is I want to resolve this redirection error in PI. I have tried raising a call with SAP itself and they pointed out to use Axis adapter which is still not working.
So I am here asking for help. any suggestions please from the experts?
Thanks
Jhansi.Hi guys,
I am sorry if I have not been clear so far!!
What I am talking about is a URL redirection capability of PI. what i mean is , when you call any service in general using a browser/soap ui etc, it pings that url and follows the redirection.
For example when i try to test this external web service directly using soap ui tool, it also returns HTTP 302 error. But when I set the 'Follow redirect' property to 'true' , it follows the redirection and calls the service on 'portal1' or 'portal2' .
You assume PI is a test tool like SOAPUI. When the address or URL changed in WSDL and if you load the latest WSDL in soapUI it post the request to the latest URL. YOu import WSDL only in ESR not in IR. Dont forget it. Though WSDL has soap address location, it will not impact the wsdl changes directly in ID.
It makes no sense to complain regarding the behaviour of PI when the reason for the problem is outside (WS provider).
please note that the target url is fixed which is https://portal.xyz.org.uk/webservice_alt.
so we are not talking here about the service provider altering the service and sending us new wsdl's etc.
All users of this webservice have been non-sap users so far and consumers use java, .net etc platforms and are easily able to handle the redirection.because this redirection is a part of failover mechanism.
I hope i am able to picture my problem.
thanks
Jhansi. -
Hello,
say I want to have five ISE 1.3 nodes behind load balancer, I want only only G0 behind LB, and G1 interfaces will be dedicated for certain things. Specifically I want to use G1 interface for Redirected Web Portal access (could be CWA, device registration, NSP, etc). RADIUS auth will happen through LB on G0 of some specific PSN, and that PSN will url-redirect user to the CWA URL.
How do I tell ISE to use specifically Gig1's IP address or Gig2's IP address? When I check result authorization profile, there is no option there, it's just ip:port. Obviously, that's not the right place, because which PSN is used to processed the policy is unpredictable.
So then I go to guest portal, and specifically Self-Registered Guest Portal that I'm using. So here I see Gig0, Gig1, Gig2, and Gig3 listed. My guess is that if I only leave Gig1 selected then I will achieve my goal, is that correct?
But then, why does it let me choose multiple interfaces, what happens if I select all of them?
Am I missing another spot in ISE admin where I can control this?
Additional question. I know that in ISE 1.2 you could configure "ip host" in ISE's CLI, which would force URL-redirect response to be translated to FQDN:port. Is that still the right method in ISE 1.3?
Thanks!Take a look at the following document:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/installation_guide/b_ise_InstallationGuide13.pdf
Towards the end of the document you will find a section called: "Cisco ISE Infrastructure" and there you will see the following:
• Cisco ISE management is restricted to Gigabit Ethernet 0.
• RADIUS listens on all network interface cards (NICs).
• All NICs can be configured with IP addresses.
So, you can take an interface, give it an IP address and then assign it to the web portal that you are working with.
I hope this helps!
Thank you for rating helpful posts! -
ISE & Switch URL redirect not working
Dear team,
I'm setting up Guest portal for Wired user. Everything seems to be okay, the PC is get MAB authz success, ISE push URL redirect to switch. The only problem is when I open browser, it is not redirected.
Here is some output from my 3560C:
Cisco IOS Software, C3560C Software (C3560c405-UNIVERSALK9-M), Version 12.2(55)EX3
SW3560C-LAB#sh auth sess int f0/3
Interface: FastEthernet0/3
MAC Address: f0de.f180.13b8
IP Address: 10.0.93.202
User-Name: F0-DE-F1-80-13-B8
Status: Authz Success
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-domain
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
URL Redirect ACL: redirect
URL Redirect: https://BYODISE.byod.com:8443/guestportal/gateway?sessionId=0A005DF40000000D0010E23A&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A005DF40000000D0010E23A
Acct Session ID: 0x00000011
Handle: 0xD700000D
Runnable methods list:
Method State
mab Authc Success
SW3560C-LAB#sh epm sess summary
EPM Session Information
Total sessions seen so far : 10
Total active sessions : 1
Interface IP Address MAC Address Audit Session Id:
FastEthernet0/3 10.0.93.202 f0de.f180.13b8 0A005DF40000000D0010E23A
Could you please help to explore the problem? Thank you very much.With switch IOS version later than 15.0 the default interface ACL is not required. For url redirection the dACL is not required as this ACL is part of traffic restrict for "guest" users.
In my experiece some users can not get the redirect correctly because anti-spoof ACL on management Vlan or stateful firewall blocks the TCP syn ack.
It is rare in campus network access layer switches have user SVI configured so the redirect traffic has to be sent from the netman SVI, but trickly the TCP SYN ACK from the HTTP server will be sent back from the netman Vlan without source IP changed. (The switch is spoofing the source IP in my understanding with changing only the MAC address of the packet). In most of the cases there should be a basic ACL resides on the netman SVI on the first hop router, where the TCP SYN ACK may be dropped by the ACL.
tips:
1. "debug epm redirect" can make sure your traffic matches the redirect url and will get intercepted by the switch
2. It will be an ACL or firewall issue if you can see epm is redirecting your http request but can not see the SYN ACK from the requested server.
Which can win the race: increasing bandwidth with new technologies VS QoS? -
Button URL Redirect - Issue passing %null% from LOV
I have issue when attempting to pass %null% from a LOV to a subsequent target page. The URL Redirect works fine when a value in selected in the LOV but passes gibberish "?ll" when no value is selected from the LOV. Can anyone shed some light on what's is going on?
Redirect looks like this:
f?p=112:411:508326687872582::NO:RP,411:P411_AGENCY,P411_CATEGORY,P411_BUDGET_YEAR,P411_OIT_OFFICE,P411_DESCRIPTION:002,%null%,2012,1665,webJeff
Edited by: jwellsnh on Jun 2, 2010 4:42 PMsvk1965,
Thank you for your response, I read many other threads and you are definitely on the right track. Got impatient though and took my project on a different track which ended being a better solution for me after all.
Jeff -
Report field substibution on URL Redirect
I am using ApEx 2.0
I have a page with two report regions based on SQL queries, joined by a common column. The master region is read only and in detail region, I changed the attribute of one field to display as text.
So, for example, the Master region has two columns:
M_COL1, M_COL2
The detail region has 3 columns:
M_COL1, D_COL1, D_COL2
The regions as joined on M_COL1 and D_COL2 is the Text field.
Next, i added a button to this detail region. When clicked I want this button to launch a URL whose parameters are sourced from some of the existing report column/fields on this page.
I cannot seem to get the substitution to work in the URL Redirect field of the button definition.
I want something to the effect of :
http://someserver:port/some_path/something?param1=&M_COL1¶m2=&D_COL2
I tried putting #M_COL1#, :M_COL1 etc. but it doesn't work.
Any ideas/pointers?
Thanks,
ManishHi,
5. Pop-up reports:
- Go to any report with link column to a form. It is a very common situation.
- Go to the link column Column Attributes/Column Link/Target and change it to URL.
- javascript: popupURL('f?p=&APP_ID.:205:&SESSION.::&DEBUG.::::YES','Help','scrollbars=yes,resizable=yes,width=625,height=350,left=25,top=150');
- Replace 205 (It is my page number) with the number of the page which you are working on.
- Apply/Apply/Run the page.
- One would see the printer friendly version of ones page in separate window without loosing original one.
This is a very simple, easy to use and understand example.
One can replace “205” with any report showing Address … for the client.
6. One Master and many Detail tables:
Suppose that there are relations One to Many between one master and two or more details tables.
One can use two regions on a page. One should be a form region for the master table and second one should be a report region with several links.
6.1. Create a view of those two or more details tables. That is one master and one details view.
6.2. Create a Master Details form. The details form should be one of details tables.
6.3. Go to Edit Region (Details Region) and change SQL Query (updatable query) to SQL Query.
The Details form became Details Report.
6.4. Change Report Region Source from details table query to the view query.
6.5. Duplicate columns which are links and reorder them. Replace their header names with “ ” for instance.
6.6. Into Column Attributes/Column Link/Link Text pick an icon.
6.7. Select for Attributes/Column Link/Target “URL”.
6.8. Into URL field type
javascript: popupURL('f?p=&APP_ID.:205:&SESSION.::&DEBUG.::::NO','Link','scrollbars=yes,resizable=yes,width=625,height=350,left=25,top=150');
and replace 205 with the appropriate page number.
Now the page has one form with Next and Previous buttons for the master table and one report for the Details view with two or more links. Pop-up window with an edit detail table form appears when one click on a link (icon).
Konstantin Gudjev
[email protected] -
ISE Wired Central Web Authentication no url redirect
We are setting up ISE for wired guest accest but are having trouble with the client being redirected. The switch gets the download from ISE and shows that it should use the URL redirect with the correct ACL.
ISEtest3560#show authentication sessions interface fastEthernet 0/2
Interface: FastEthernet0/2
MAC Address: 001d.09cb.78bd
IP Address: Unknown
User-Name: 00-1D-09-CB-78-BD
Status: Authz Success
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
ACS ACL: xACSACLx-IP-ISE-Only-52434fbe
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://REMOVED.Domain.corp:8443/guestportal/gateway?sessionId=0A0003E600000039064485B1&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A0003E600000039064485B1
Acct Session ID: 0x00000293
Handle: 0x95000039
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
From the client pc I can get name resolution for anything I ping. I also can ping the ise server by name. The ACL that is downloaded it as follows:
Extended IP access list xACSACLx-IP-ISE-Only-52434fbe (per-user)
10 permit udp any eq bootpc any eq bootps
20 permit udp any any eq domain
30 permit ip any host 10.4.37.91
40 deny ip any any log
Extended IP access list ACL-WEBAUTH-REDIRECT
10 deny udp any eq bootpc any eq bootps
20 deny udp any any eq domain
30 deny ip any host 10.4.37.91
40 permit tcp any any eq www (13 matches)
50 permit tcp any any eq 443
51 permit tcp any any eq 8443
60 deny ip any any
The machine passes the Authentication with MAB and hits the CWA Authorization profile, ISE shows the cient as "Pending" then the next entry above that is the log is the dACL getting pushed to the switch. Could part of the issue be that the device shows Unknown for IP address? The command ip device tracking is in the swtich:
ISEtest3560#show running-config | include tracking
ip device tracking
ISEtest3560#
We have 802.1x clients working and the IP address for those do show up..
Please advise,
Thanks,
JoeISEtest3560#show ip access-lists interface fastEthernet 0/2
ISEtest3560#
Doesn't appear the dacl is being applied.
interface FastEthernet0/2
switchport access vlan 11
switchport mode access
ip access-group ACL-DEFAULT in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 999
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab webauth
authentication priority dot1x mab webauth
authentication port-control auto
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
spanning-tree guard root
Extended IP access list ACL-DEFAULT
10 permit udp any eq bootpc any eq bootps
20 permit udp any any eq domain
30 permit icmp any any
40 permit udp any any eq tftp
41 permit ip any host 10.4.37.91
50 deny ip any any log (1059 matches)
Could the dACL being causing the issue with the Unknown, or is the Unknow causing the issue with the dACL?
Thanks,
Joe -
ISE CWA FLEXCONNECT - No url redirect
Hi,
I'm setting up a LAB environment for CWA with ISE(1.2.1), vWLC(8.0.100), ASA5505(9.1.X) and a 2602 AP in flexconnect mode.
Unfortunately I'm running into problems.
The AP, WLC and ISE is all running in vlan 1 which terminates in the 5505 as a inside interface.
Vlan 2 is a guest network terminating on a separate interface in the ASA.
The problem that I'm facing is that the url-redirect from the ISE dosent' work. If i check the client summery on the vWLC I can see that the client get applyes the redirect flexconnect ACL and that the URL is present. I've verified that it's not a DNS issue and I'm able to manually connect to ISE so there is no ACL blocking me. The client just dosen't get the redirect. I've tired with multiple devices (windows,ios,android) and it's all the same.
I've followed the following guides:
http://www.drchaos.com/flexconnect-local-switching-guestbyod/
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html#anc11
Currently I'm at work but I can provide some debug output later.
Have anyone seen this behavior before?It is possible that you are hitting the following bug:
https://tools.cisco.com/bugsearch/bug/CSCue68065
One thing this bug does not mention is that there is another resolution outside of disabling local switching. The alternative is:
1. Create a standar ACL on the controller that is named exactly as the FlexConnect ACLs
2. The standard ACL does not have to have any ACE in it
I have ran into this issue before and the above workaround has worked for me. The issue was supposed be addressed in version 8.x of the WLC but I think it is still worth giving it a try.
Thank you for rating helpful posts! -
Cisco ISE guest portal redirect not working after successful authentiation and URL redirect.
Hi to all,
I am having difficulties with an ISE deployment which I am scratching my head over and can't fathom out why this isn't working.
I have an ISE 3315 doing a captive webportal for my guest users who are on an SSID. The users are successfully redirected by the WLC to the following URL:https://x.x.x.x:8443/guestportal/Login.action?portalname=XXX_Guest_Portal
Now when the user passes through the user authentication splash screen they get redirected to https://x.x.x.x:8443/guestportal/guest/redir.html and recieve the following error:
Error: Resource not found.
Resource: /guestportal/
Does anyone have any ideas why the portal is doing this?
Thanks
PaulHello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again.
Maybe you are looking for
-
How to change the background color of a sequence?
I'm using Premiere Pro CS5 on Win7 x64. I've imported a JPEG that's a different size than my 1920 x 1080 frame. The background of this JPEG is white, but the background of the sequence is black (by default), so the borders of the JPEG make it stand
-
How to fire event to generate insert message for the child objects?
We are in process to integrate CRM On Demand and existing Microsoft SQL DB. We have the following problem: For ex., we have CRM Object_1 that already synchronized with the SQL DB. CRM also has independent Object_2 and its child Object_2.1 We dicided
-
Why do applications keep force quitting when try to open them?
Mail, microsoft word, chrome, firefox, iPhoto and another apps force quit wheni try to open them. i have run disk utility and onyx many times.
-
Wrong Search result for Employee Resp.lD when searching Sales Order
Hi All, Happy new year first of all, I encounter a problem when using search sales order in WebUI. I am using SAP CRM 2007 SP4. I notice that the search result by using Employee Responsible ID as criteria, is returning Person Responsible instead ! I
-
Hi, When I try to create control.sql & control.trc from the existing system. I get following error. Pls guide to sort this issue. os.name = Windows 2003 os.arch = x86 os.version = 5.2 sun.cpu.endian = little sun.arch.data.model = 32 sun.cpu.isalist =