Porblems with importing Ae files into Premiere

Hi,
I have been working on quite a big project for the last month in after effects, creating a animation which is divided into 26 parts. I now want to insert them into premiere. The problem now is that the blend modes that i used in after effects in the layered comps has now been lost when i place the AE file into premiere. Can anyone suggest how to insert the AE file into premiere with all the applied blend modes??

You can render and export movies from After Effects and use those as clips in Premiere Pro.
There's a list of ways to move data back and forth between After Effects and Premiere Pro here: "Working with After Effects and Premiere Pro"
The methods that involve directly importing a project from one program into another or using copy and paste are convenient for some things, but the fidelity of the conversion is not always what you need. (E.g., limitations for copying and pasting are listed here.)
If you're jumping into After Effects from Premiere Pro from time to time to do work on a shot, then you should check out the Dynamic Link features.

Similar Messages

  • Help with importing r3d files into premiere pro cs6

    When I try to import these files into the media browser, a notification pops up saying the file is either damaged or unsupported. The file is not damaged however, and I need to be able to import these files into my project.

    do you know the 'flavor' of .r3d?
    red epic: imports fine
    red dragon: can't import into cs6
    if it's dragon, you will have to flip to a format cs6 likes
    by using the free redcine-x
    http://www.red.com/products/redcine-x
    hahahahahahahahahaha!!!

  • Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

    Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

    You can easily (and better, IMHO) do what you want in Adobe Prelude.  It's part of the CC subscription, and may have been included with CS6.
    Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips.  Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting.  Don't select the Transcode option.
    Cheers,
    Jeff

  • Can't import prores files into Premiere Pro CC or SpeedGrade CC

    Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
    I also can't export to DNxHD files to an MXF file either.
    I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
    Conflict?

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

  • No sound when importing MTS files into Premiere Pro?

    Hey guys, I'm editing a film for my Drama Assessment at school. I used a Canon HD Camcorder which saves files as .MTS extension. My problem is that when i import the files into Premiere Pro CS5 there appears to be no sound???? CAN ANYONE HELP ME PLEASE!!!

    if you can hear the audio  with media player or with any other player in your computer then check settings
    EDIT--PREFERENCES--AUDIO HARDWARE AND CLICK ON ASIO SETTINGS.
    another dialog box will appear and in that under
    INPUT AND OUTPUT TAB
    MAKE SURE ALL THE OPTIONS/BOXES SHOULD BE CHECKED .
    DO NOT FORGET TO UPDATE TO 5.0.3

  • Im having trouble importing mov files into premiere pro on creative cloud, have installed quicktime

    Im having trouble importing mov files into premiere pro on creative cloud, original problem was no video and only audio when I imported mov file, so I have installed quicktime after reading that may solve the problem,but now an error message reads codec missing or unavailable, any help would be appreciated

    MOV is a wrapper... what is inside the wrapper?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  • Importing Photoshop files into premiere pro CS6 issues

    Hi
    I recently re-installed Premiere Pro CS6 on my work computer (i changed from a HDD to an SSD). Ever since I did this I am having an issue importing .PSD files into Premiere.
    I try and import a photoshop file. The importer window comes up. The progress bar starts to move, then pauses and the Importer says 'Not Responding'. After a few seconds it comes back and throws up the following error:
    Error message - 'The importer reported a generic error'
    All projects i previously worked on that had .PSD files in them are now reporting these files as 'Media Offline' meaning I have to replace them with .PNG files which is really annoying.
    Any ideas what might be happening? The files I am trying to import are RGB .PSD's. They worked previously without any issues.
    I have Premiere Pro Version 6.0.5 (001 (MC: 264587))
    running on a Windows 7 machine with Service Pack 1, 64 bit OS, 16GB Ram and Intel Core i7-2600
    Many thanks in advance for anyone who can help me with this!

    Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
    So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

  • Can I import flash files into Premiere Elements 8

    I want to use Google Motion charts in my video. Is this possible?

    thanks for that info. I wil probably purchase it for myself -- but I wanted to test it first.
    Date: Fri, 27 Aug 2010 10:41:01 -0600
    From: [email protected]
    To: [email protected]
    Subject: Can I import flash files into Premiere Elements 8
    One thing to point out, if you are doing this with the trial. While it is 100% (nothing crippled, or omitted), the trial WILL put a watermark on the finished Project. If you are doing this for work, be aware of that watermark. This http://forums.adobe.com/thread/433730?tstart=0 will give you some tips and background.
    Good luck, and I do not want you to be surprised and mad, when you get that watermark.
    Hunt
    >

  • When I import .mts files into Premiere 7 the audio is intermittent?

    Good afternoon. I am new to this forum and your help would be appreciated. I have recently purchased a Sony Hard Drive Camcorder X105E and I have done my first filming. When I import the files into Premiere Elements 7 and preview them the audio is intermittent on playback. What am I doing wrong cause I cant figure it out?
    Thanks in advance for your answers
    Regards
    Edenr1

    OK, on the I/O, you have one, nicely sized, physical HDD. You don't have it partitioned, do you?
    With one physical HDD, so many things are happening at the same exact time:
    1.) your OS is reading/writing to it
    2.) your program is reading/writing to it
    3.) your media is being read from it
    4.) your OS's Virtual Memory is probably being used, so it's reading/writing to it
    The problem is that all of these (plus possibly some other programs/Processes) are fighting to get their data handled at the same time. Each is telling the HDD that it needs the heads in one place on a platter. Same for the next program, and the next. Unfortunately, regardless of the speed of the HDD and the speed of the controller, the heads can only be in one place at one time.
    Especially for the Audio (that is more I/O intensive, than the Video usually is - it taxes the CPU much more), you will benefit from more physical HDD's.
    I just posed an ARTICLE in the Tips & Tricks sub-forum. It links to two articles by Harm Millard. His article on HDD setup is a gem. Now, it takes things to a professional NLE level, and few are quite ready for that, still the info is good. Much can be extrapolated from his suggestions. Though he lists the ultimate Video editing setup, many concepts can be applied on a smaller scale. You might want to read over the linked articles. They will give you some things to think about.
    Also, I just saw an ad for a 1TB WD ATA-300 HDD for US$ 79.00 at Fry's Electronics. While you may need an ATA-100, this shows how far prices have fallen. I've got an ATA-100 1TB, to augment my 4x1TB SATA II's, and it's not that old. I paid US$ 400 for it! Should have waited, but then I've used it for the last year, so all is not lost.
    Good luck,
    Hunt

  • Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Urgent please
    anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Sounds like the folder Write permissions issue described here with a solution:
    "Some import operations were not performed" from camera import

  • Import mov files into premiere pro cc windows

    Hi
    to import mov files into premiere pro cc 64bit ,windows 8.1 64bit pro do i need Quicktime pro or quicktime alternative  ?
    because when i try to import a mov file i got this error
    thanks
    i remember cs6 was able to import it
    i have never installed quicktime pro

    Your question simply cannot be answered definitively for a given clip because it's the codec that matters, not the wrapper/file extension.
    As of one of the 7.x releases, Premiere implemented native support for decoding some codecs within a QuickTime file. But that native support does not extend to the entire universe of codecs that can be stuffed into the wrapper.
    So you can either report the codec or simply install QT and see if that enables PPro to import the clip.

  • Can't import Photoshop files into Premiere Pro

    I am learning Premiere Pro CS6 and I am using a book titled "Classroom in a Book".  One of the exercises is to import a Photoshop file into Premiere Pro.  I received a generic error message "The importer reported a generic error".  I found that if I run Premiere Pro as an Administrator that the issue goes away.  I wasn't too worried about it until I realized that my ShuttleXpress does not function when I am running Premiere Pro as an Administrator.  Does anyone have any idea what is going on???? This is very frustrating.

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

  • Importing AE file into Premiere Pro

    I am having trouble importing my After Effects .mov file into Premiere Pro. When I lay it in the time line, the images and text look all granulated. Does this have something to do with my render settings?

    To elaborate on Andrew's post: Premiere will always assume all footages have the same specs as the project settings. For DV/ HDV projects this means it will think they are interlaced with lower fields. if you didn't render them with these settings, you will have to tell this Premiere by manually setting the footage interpretation just as you would in AE. Also check your viewer settings. Maybe they are just set to draft quality or auto-adjust themselves because you scaled them oddly and thus the clips are presented at crooked scaling rates. Another potential cause for this could be a problem with your graphics card, so if you cannot resolve the matter by the other methods, disable hardware accelerated playback in the viewer's options (the little arrow in the top right corner).
    Mylenium

  • Importing project files into Premiere Elements 7

    I have created a new project, imported several video clips and then created a video. It was only at the point of creating the video that I reliased that I had not created the project with the correct settings.
    Although the video looked fine in the editing window, the final video had black bars at the sides, and above above and below the video, and fairly think black bars. I've tried exporting as different formats, and changing the aspect ratio, but this has not helped. I've attached a jpeg of what the video looks like in Quicktime.
    Other video editing software I have used, has the ability to change the project settings after it has been created, and give a warning to the user about possible problems they may encounter by doing so.
    This does not appear to be the case with Adobe Premiere Elements 7, and it is extremely frustrating!!
    One thing which appears to be possible with Premiere Pro, and was also available on other editing software I have used, is the ability to import projects.
    So... does anyone know if it is possible to import a Premiere Elements 7 project file into Premiere Elements 7? The aim here is to create a project with the correct settings, and then import the existing project file into the timeline.
    I've tried hacking the project file, which has improved the video slightly, but still not what I was expecting.
    Cheers
    Paul

    This problem should have been picked up by Adobe's test analyst during testing of the product.
    I am sorry, but I am not following you on this. There are Presets to match many media types. I am not at all sure how Adobe could anticipate that a user would choose the wrong one.
    As I said, PrPro CS4 will both allow you to Import your .PREL (with the caveats mentioned), and work on the Project with Sequence settings to match. Unfortunately, PrE is a much less sophisticated and expensive program, than is PrPro CS4.
    I'd be happy to Import your file, in PrPro with the proper Presets, but the rub would be that PrE cannot Open .PRPROJ files, so you still could not edit it.
    Sorry, but the first rule of any NLE is to establish Presets that match one's Assets. PrPro CS4 (not before that version) allows one to cover their mistakes a bit, but there is still some work getting the improperly set Sequence's material into a new, properly set Sequence.
    If you have access to PrPro CS4, and can finish your Project there, that would be the best. Next would be to create a New Project with the proper Presets and chalk up the lost time as a learning experience.
    Sorry ot bear the bad news.
    Good luck,
    Hunt

  • When importing MPEG files into Premiere Pro CS3 the audio sequence is missing.

    We have two computers running Premiere Pro CS3.  Our computer most recently installed with PPCS3 will only import an audio sequence with the MPEG video file when I extract the file directly from the DVD.  When I take the video folder from the DVD and drag to my Desktop, importing to PP from the desktop, it will only import the video sequence; audio does not appear.  What would cause this happen and how can I fix this?  It's too time consuming to continuously use my DVD Extractor.

    1st, that old program has a different forum http://forums.adobe.com/community/premiere/premierepro_previous
    2nd, To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory

Maybe you are looking for