Speakers Rated at 100W at 8Ohms, Receiver 120W per Channel Question

I've read up on the latest midrange AV receivers and I've narrowed it down to two with a preference for one more than the other.
My preference is the Pioneer VSX-1019AH-K since it is very highly rated in terms of overall sound and video output to the TV. The only drawback is that it is rated at 120W per channel. The older Onkyo speakers that I have and would like to continue to use are only rated at 100W max power at 8Ohms.
Currently my second choice would be Onkyo's TX SR607 received decent reviews. It is only rated at 90W per channel which works for my speakers, but I've read that the video output to the TV is a little lackluster.
My question are:
1. Will I be blowing out speakers if I choose the Pioneer?
2. If you answered "yes" to number 1, does this happen under normal listening volumes or would I have to "turn it up to 11" in order to damage my underrated speakers?
I generally keep my volume level's down since I live in a townhouse community and I want my neighbors to like me.
Thanks, any input would be helpful.
Mike

You could possible blow them but you would have to turn them up pretty loud to start pushing 120W through them. The rated power is a little misleading, it may do 120watts but thats usually in 2 channel mode and rarely will go that high in full surround. Most surround sound recievers at 75watts or higher will do just fine. As for the SR607 it is quite a nice reciever for more info:
http://www.soundandvisionmag.com/features/3168/first-listen-dolby-pro-logic-iiz.html

Similar Messages

Dynamic name for attachment in the Receiver Mail Communication Channel

Hi All,
I want to dynamically set the name of attachment in receiver mail Communication Channel.
Example: IN__9907211000004_4048454000005_20081211_01000000002643
The first two numbers 9907211000004 & 4048454000005 I want to read it from the message
20081211 this is the date and
And againg this number 01000000002643 is read from message.
What is the procedure to create Adapter Module? I am new to Adapter Module.
Any Ideas ideas?
Thank You,
Mukhtar

Hi Michal,
I had a look to your blog and tried to modify according to my requirement.
Here is the code
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.mp.module.*;
import com.sap.aii.af.ra.ms.api.*;
@ejbHome <{com.sap.aii.af.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.mp.module.ModuleRemote}>
@stateless
public class SetAttachmentName implements SessionBean, Module{
     private SessionContext myContext;
     public void ejbRemove() {
     public void ejbActivate() {
     public void ejbPassivate() {
     public void setSessionContext(SessionContext context) {
          myContext = context;
     public void ejbCreate() throws CreateException {
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
                      throws ModuleException{
     try {
Message msg = (Message) moduleData.getPrincipalData();
//creating parsable XML document
InputStream XIStreamData = null;
XMLPayload xmlpayload = msg.getDocument();
XIStreamData = xmlpayload.getInputStream();
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
Document doc = docBuilder.parse(XIStreamData);
//finding the tag's name from the Modules tab in the Directory that will hold the attachment's name
String SenderIDTag = null;
SenderIDTag = moduleContext.getContextData("SenderIDTag");
//finding the content of the tag that will be used as the attachment's name (assuming it's the only tag with this name)
Element element = doc.getDocumentElement();
NodeList list = doc.getElementsByTagName(SenderIDTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
String anIDTag = null;
ReceiverIDTag = moduleContext.getContextData("ReceiverIDTag");
element = doc.getDocumentElement();
list = doc.getElementsByTagName(ReceiverIDTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
Date date= new Date(System.currentTimeMillis());
//Add date to the Message
SimpleDateFormat dateFormat= new SimpleDateFormat("yyyyMMdd");
mailFileName += "_" + dateFormat.format(date);
String BillNrTag = null;
BillNrTag = moduleContext.getContextData("BillNrTag");
element = doc.getDocumentElement();
list = doc.getElementsByTagName(BillNrTag);
mailFileName += "_" + list.item(0).getFirstChild().toString();
//creating the attachment
byte by[] = xmlpayload.getText().getBytes();
XMLPayload attachmentXML = msg.createXMLPayload();
attachmentXML.setName(mailFileName);
attachmentXML.setContentType("text/pdf");
attachmentXML.setContent(by);
//adding the message to the attachment
msg.addAttachment(attachmentXML);
        inputModuleData.setPrincipalData(msg);
    } catch (Exception e) {
        throw new ModuleException(e);
    return inputModuleData;
I hope this is right Adapter Module coe for my requirement.
Thank you in Advance,
Mukhtar

JMS ReplyTo Queue Name parameter in the receiver JMS communication channel

Hi All,
Can any please explain the use of JMS ReplyTo Queue Name parameter in the receiver JMS communication channel?
Thanks
Karthik.

Hi karthik,
JMS ReplyTo Queue Name parameter is used for Specify the name of the queue to which the responses are to be sent.
Thanks
Govind.

Receiver SOAP Comm Channel Settings with TServerLocation

Hello All,
We are working on using Dynamic Configuration of Receiver SOAP. We are using the following scenario
*Can anyone please guide us on Receiver SOAP Comm Channel settings*
1) Value to be used in Target URL
Which parameters need to be checked ?
Currently we are getting the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.util.URI$MalformedURIException: no scheme</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Truly apprecaite your help
Thanks.
Kiran

Hello
Can anyone guide me on the settings in receiver Comm Channel which uses dynamic configuration in TServerLocation ?
Thanks.
Kiran

Monitoring receiver idoc communication channel

Hi All
I have an idoc to idoc scenario.
I am unable to see my receiving idoc communication channel in communication channel monitoring of RWB. It is not available in the dropdown list.
I want to have a look at the audit log to see if the idoc is delivered to the receiving system.
How can i monitor receiver idoc communication channel?
How can i ensure that the idoc is delivered to the receiving system?
In sxmb_moni, status is checkered flag.
Many Thanks
Chandra Sekhar

Hi,
IDOC is on ABAP stack hence u can not monitor IDOC.
For testing purpose
1) GO to SXMB_MONI check the status of message.
2) Go to R3 and enter Tcode WE02 and check the IDOC which is send from XI. enter the idoc name and see the status of IDOC it should be in green status if it is posted successful or else see the status record for checking the error message.
chirag

Receiver SOAP Communication channel -- Target URL

Hi Experts,
Can anyone provide some inputs for my below question?
How the receiver SOAP Communication channel internally calls the Target URL?
What is the internal process behind this call?
I would really appreciate you all if could provide answers.
Thanks & Regards,
Prabu Muthu

Hi...
To be able to send SOAP messages from the Integration Server/PCK to remote clients or Web service servers, you must first configure the receiver SOAP adapter. The receiver adapter supports system acknowledgments but not application acknowledgments
Find the below link .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Regards,
Leela

Schedule Receiver RFC communication channel to call R3 RFC-FM.

Hi,
I have requirement that I need to schedule/trigger from PI to RFC call R3 function module. Wonder if anyone here has done similar thing before? I tried to use ATP (Availability time planning) in RWB. But this seem does not success for me as there is no response and error message for this.
Below is my configuration detail:
Configured:
1. Receiver communication channel - RFC
2. Receiver agreement with the RFC message type assigned.
3. Scheduled receiver RFC communication channel via ATP daily
*(It is possible to make scheduling job in R/3 but we are not considering this way)
Please let me know if anyone has done this before or any other suggestion to do the scheduling from PI.
Thanks!
Regards,
SP

Hi SP,
As you mentioned, ATP would allow adapter to be open and in start state. Adapter's RFC, SOAP, JMS would need some other application to trigger the message processing because these are not like pooling adapter's File, JDBC and Mail. RFC adapter channel always listening to the RFC port and FM execution. Once FM from R/3 executed then the RFC adapter would trigger it's message processing.
For Sender RFC channel: In order to trigger the RFC adapter execution at particular time then you should write a simple ABAP code which would act a batch application and which does the triggering the FM and Sender RFC channel.
For Receiver Channel: For Receiver RFC channel it's bit trichy because here you have force Receiver RFC adapter to connect backend the execute or initialize the variables without having any XI message triggered from Sender PI channel.
I have 2 ideas:
1. A little difficult approach, similar to the ABAPbatch code, you need to write a java adapter module which can trigger RFC receiver channel to connect and do an initialisation at FM at regular interval.
2. Simple approch configure a File-> 2-> RFC receiver scenario, configure File sender adapter to pick a dummy file at regular interval and RFC receiver channel does the rest.
Please let me know still you have any doubts,
Thanks,
RK

ORABPEL-05002 or ORA-03111: break received on communication channel

We are on 11.1.1.3 and one of the SOA processes needed to make an oracle stored procedure call...The stored procedure call was returing a nested object type as a a parameter...500 rows at a time...in a loop. The first few iterations would work but at some point at the 4th or 5th iteration it would throw the ORA-03111: break received on communication channel error...Solution was to embed a java code before the invoke to do a checkpoint();
So all you needed to do was to do that in the statement checkpoint(); That was it. After a day and a half setting different parameters which did not work...the adding the checkpoint() made it work!
Metalink note How to Avoid BPEL Errors Due to Adapters Response Time (10g) [ID 885114.1] had the resolution

Hi,
Can you please let us know how this issue got resolved, We are also facing the same problem.
This is very critical issue for us, Please help.
Thanks,
Neeraj.

Trouble receiving multiple MIDI channels

Hi everyone.... I am trying to dump some sequences from my Roland MC-505 Groovebox into Logic Pro. I set up eight tracks in Logic and assigned them each to a different channel of my Digi002 (my MIDI port), but when I play the Groovebox into Logic, ALL channels are routed into only whatever track happens to be selected in the Arrange area.
Does anybody know how I can receive the different channels on their respective tracks? Is there an easier way I can go about this all together?
Thanks,
scotty

The question has been answered here:
http://www.coderanch.com/t/463726/Java-General/java/Multiple-Midi-Channels

ORA-03111: break received on communication channel

We have recently migrated the weblogic from 8.1 to 10.3.2 which using for backend of java application. I am getting the error message "ORA-03111: break received on communication channel" often but it was working well before the weblogic upgrade. As per recommendations, I increased the JTA timeout in web logic server even though the error is still persisting.
Please let me know if any suggestions to sort out this issue.

http://royontechnology.blogspot.com/2009/06/mysterious-ora-03111-error.html
see here
ORA-03111: break received on communication channel
google helps
looks like you have to review your JDBC configuration

Inspire 5600 5.1 speakers, not enough analogue inputs on receiver? help!

Hi, I need some help connecting my computer up to my Inspire 5600 speakers. I want to set up an analogue 5.1 connection, as apparently surrouund sound in many games doesn't work with optical. My problem is with the inspire 5600 receiver. It only has analogue inputs for front and rear speakers, and none for centre/subwoofer. I tried using the Creative technical support site, but for some reason my speaker set isn't listed (it has the Inspire 5200, and the I-trigue 5600, but no Inspire 5600). I checked the guides for other speaker sets to see if they were relevant, but the flash animations all show 3 analogue inputs, not the 2 that my receiver has. My speakers are a few years old, and unfortunately I don't still have the documentation that came with them.
My question is where do I plug the centre/subwoofer? Does the Inspire 5600 not actually do 5.1 for analogue? (Aside from the analogue front/rear inputs, it has an optical in, digital din and a coaxial). Does the centre/sub maybe plug into one of these instead? I'm very confused, any help would be appreciated.

Sorry I mistook it for another model, my bad. The Inspire 5.1 Digital 5600 has only two analog inputs for front and rear channels respectively. You are right, there is no orange jack on the subwoofer for this model. Last I checked, I was told that this speaker model was released before sound cards with 5.1 connections came about. So if you are doing up an analog connection, you will lose the center/subwoofer channel. However if you own a Creative sound card, you might be able to enable the CMSS feature to create a virtual surround.

TS1630 My iphone4 speakers will only work when I receive a call or factime, but for nothing else. Why?

My Speakers on my iphone4 will only work when I receive a call or facetime, and are muffled when an alarm goes off. Other than that, I have absolutely no sound from anything- text, music, videos, games, etc. UNLESS I use headphone. My phone will vibrate with text messages, though. When I try to turn up the volume on the side, it doesn't register any bars- the space for the volume boxes is blank. Also, there is no volume bar in my music when I try to turn up the volume. I have tried restarting my phone numerous times, I have also checked and rechecked the switch on the side to no avail. Does anyone have any troubleshooting ideas or know what might cause this?

I tried this and noticed a little green inside the charging port. I panicked thinking it was corrupt, but found out if you lighting moisten the toothbrush with alcohol and gently scrub (with the power off) you can remove the green. I started inspecting one of our charging adapters, which had been giving us trouble, and it was very green inside. Not sure if it can transfer from one to the other?
BUT now I have sound! Thanks for your suggestion, it helped!

Problem in creating a textfile using FCC in Receiver Comm. Channel

Dear experts,
I have a problem creating a flat file using file content conversion in PI.
My target XML structure looks like this:
1..1
1..n
1..1
1..n
1..1
The mapping itself goes fine, result in XML looks OK.
But I need to create a flat textfile that looks like this:
Fileheader
Invoiceheaderdata1
Invoicedetaildata1
Invoicedetaildata2
Invoiceheaderdata2
Invoicedetaildata1
Invoicedetaildata2
Invoicedetaildata3
Filetrailer
How do i configure the FCC in the receiving communication channel? I keep getting an error with the invoicedetaildata node.
Thanks in advance
William

Can you provide us with the receiver communication channel parameters and along with that the errors received?
Regards
Indranil

Receiver FTPS (Explicit) channel giving error while writing files.

Hi All,
We are facing an issue while using FTPS for writing a file to a partner location. Since this is the first time we are using FTPS, we went through some blogs and notes to configure the same, but still facing problems. Listed below are the steps undertaken for the configuration:
1. Got necessary ports opened on the firewall (the partner FTPS site uses explicit FTPS with control commands on port 21 and data on some custom ports).
2. Tested file transfer on FTPS using some FTPS client tools from the PI 7.11 server being used.
3. Uploaded the server SSL certificates in the NWA Keystore, Trusted CA view in both Base64 and normal formats (all certificates in the chain uploaded).
4. Configured the FTPS receiver channel for the CN name mentioned in the certificate, port 21, directory specified, NO X.509 client authentication (as that is not needed), AUTH TLS, USER,PASS,PBSZ,PROT as command order and using some authentication (user ID, Pwd for logging in).
But we are still getting the error:
'An error occurred while connecting to the FTP server 'xxxxxx.xxx.com:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Access denied.'. For details, contact your FTP server vendor..'
On the partner side we could not find any logs and from PI too we are not getting any more details than mentioned above. CAn some let us know any known resolutions to the issue or how to get more details from the trace in PI (we have already increased the trace level of the file adapter to error but nothing more useful is available in Java default trace than mentioned above).
Appreciate any help extended towards this.
Thanks in advance,
Avishek.
Edited by: Avishek Gorai on Feb 21, 2011 8:50 AM

Thank you all for your answers. I want to bring to your notice that the file transfer (using FTPS) is still working using commercially available FTP client tools from the PI server. So in my opinion issues like OS user not having authorization, incorrect user credentials and firewall issues are ruled out. We are facing issue only when using PI adapter for file transfer, this could be due to incorrect commands or command sequence being sent to the Server etc. which the server is rejecting and giving an unauthorized error.
We also tested this by giving incorrect pwd OR changing the command sequence, in which case the errors thrown were more specific and appropriate (like incorrect credentials OR AUTH TLS command missing).
The strange thing is that things work from the PI server when using FTP tools, but fails from PI adapters, which makes me feel there is some issue with the protocol or the setup.
Also please let me mention that we have ensured Java cryptographic toolkit is installed on the PI system being used.

Issue with JMS Receiver Comm. Channel using Seeburger AttribMapper

Hello,
I'm using a JMS_RECEIVER Comm. Channel on which the Seeburger AttribMapper is configured (I need to use the DCJMSCorreleationID dynamic attribute).
In the module tab, I added a new module:
Module Name Module Type Module Key
localejbs/Seeburger/AttribMapper Local Enterprise Bean map
And I added the following parameter:
Module Key Parameter Name Parameter Value
map http://sap.com/xi/XI/System/JMS/DCJMSCorreleationID "TEST"
When processing a message, I get the following error on the Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of AttribMapper.
Does anyone has an idea on how to fix this problem?
Thanks for your help!
Benoit

HI,
Refer the discussion of
Setting DCJMSCorreleationID in JMS RECEIVER using Seeburger AttribMapper
Dynamic subject in AS2 receiver
Thanks
Swarup

Speakers Rated at 100W at 8Ohms, Receiver 120W per Channel Question

Similar Messages

Maybe you are looking for