Port No. for running isqlplus
Firstly admit that I DONT KNOW WHETHER IS IT THE RIGHT FORUM OR NOT.
I gave my query in isqlplus forum (which is below in "") & get respective path to solve my query. But it is not clear to me.
Is here any person who will help to solve my query?
If I hurt any one then I apologise in advance.
"" Hi all,
Just yesterday I installed Oracle9i in my PC which OS is WinXP. After installing, I faced a problem whenever I tried to run isqlplus.
Because from Oracle Enterprise Manager console I found Host (pc) & PORT (1521). So, when in IE i gave (http://pc:1521/isqlplus) it couldn't run. But after so many attempt, when I use PORT No. 80 instead of 1521, isqlplus window was open and run successfully.
Now my question is : Why PORT NUMBER is change from Console Manager & WinXP port no.?
Can any one clarify this? Does it differ in various OS?
Sans
"Hi user514582,
I don't know why the port has changed but here is the solution to change it back:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm#sthref446 ""
Hello,
I would like to respond to your query/question.
The Port Numbers allocated to the Operating System (OS) cannot be used by any other applications. They are specific to Operation System only.
The Port Numbers are specific to the Oracle Database (1521). This port number is the one which is used by any client machine trying to connect to the Oracle Database trying to serve / listen to any requests at this designated port. Oracle Enterprise Manager (OEM) is a console application that can be used to monitor and configure your Database and Application Servers.
Application Server (Apache) is installed as a part of the Oracle Installation, there is a different Port number allocated to this, which is Port 80 in this case and thats the reason, when you try to connect to isqlplus using 1521 it gives an error and when you try top connect using Port 80, it successfully displays the appropriate page.
All Applications requiring and running on Apache/Application Server will use the Port 80 to run and all Database requests will be routed via the Port 1521.
Hope this information helps and clarifies the doubts.
Regards
Shivanand Koppalkar
Similar Messages
-
Port Number in Oracle9i for running isqlplus
Hi all,
Just yesterday I installed Oracle9i in my PC which OS is WinXP. After installing, I faced a problem whenever I tried to run isqlplus.
Because from Oracle Enterprise Manager console I found Host (pc) & PORT (1521). So, when in IE i gave (http://pc:1521/isqlplus) it couldn't run. But after so many attempt, when I use PORT No. 80 instead of 1521, isqlplus window was open and run successfully.
Now my question is : Why PORT NUMBER is change from Console Manager & WinXP port no.?
Can any one clarify this? Does it differ in various OS?
SansHi user514582,
I don't know why the port has changed but here is the solution to change it back:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm#sthref446 -
How do i find the port number for oracle10g
Hi,
I have installed oracle10g on my pc running windows XP. I need to get the port number for JDBC drivers used by Java Application when defining a JDBC source.
Java is running on the same machine.
When I installed oracle I was given the links (with port numbers) for EM, ULTRA SEARCH and iSQLPLUS, what I need is the ORACLE10g database port number. Anybody know where I get from ?
Cheersthanks for the reply the portlist does not contain the port of oracle. The file is below.
[i]Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (oracle10) = 5500
Enterprise Manager Agent Port (oracle10) = 1830
However searching through some other threads found the port to be 1521, which
oracle must set during installation and tell anybody, unless this infor is in the log.
so configured the oracle JDBC driver as below (PE8.2 --> ConnectionPools)
Datasource Classname = oracle.jdbc.pool.OracleDataSource
URL = jdbc:oracle:thin:@localhost:1521:oracle10
User = abc
Password = abc
Now able to ping. Cheers -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
"Error while accessing porting layer for ORACLE database via getSessionId()
Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
... 90 moreActually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
... 90 more -
Port forwarding for clientless SSL VPN access
Hello,
I am currently trying to set up clientless SSL VPN access for some remote sites that our company does business with. Since their machines are not owned by my company, we don't want to install/support a VPN client. Therefore, SSL is a great option.
However, I'm running into an issue. I'm trying to set up port forwarding for a few remote servers. These remote servers are different and have distinct IP addresses. They are attempting to connect with two different servers here.
But my issue is that both servers are trying to use the same TCP port. The ASDM is not letting me use two different port forwarding rules for the same TCP port. The rules can exist side-by-side, but they cannot be used at the same time.
Why? It's not trying to access the same TCP port on a server when it's already in use. Is there anyway I can get around this?
If this doesn't make sense, please let me know and I'll do my best to explain it better.Hi Caleb,
if you mean clientless webvpn port-forwarding lists, then you should be able to get your requirments. even the same port of the same server can be mapped to different ports bound to the loopback IP.
CLI:
ciscoasa(config) webvpn
ciscoasa(config-webvpn)# port-forward PF 2323 192.168.1.100 23
ciscoasa(config-webvpn)# port-forward PF 2300 192.168.1.200 23
then you apply the port-forwarder list under a group-policy
Hope this helps
Mashal
Mashal Alshboul -
I've got a NAS setup with various services running on custom ports to help minimize exposure (especially to script kiddies). I've tested everything both internally and externally to confirm they all work, and even had someone at a remote location confirm accessibility as well. Port forward configurations performed on the Actiontec are working well.
I installed an L2TP/IPSec VPN server, tested internally and it connected successfully. So for all intents & purposes, this validates that the VPN server is correctly configured to accept inbound connections and functioning correctly.
I logged into the Verizon Actiontec MI424WR router, setup port forwarding for UDP ports 500, 1701 & 4500.
Note: I added the AH & ESP protocols based on what I saw on the built-in L2TP/IPSec rules
With the port forwarding in place, I tested VPN externally but it didn't connect.
I've done the following so far to no avail:
Double & triple checked the port forwards, deleted & recreated the rules a few times to be sure
There are no other pre-existing L2RP/IPSec port forward rules or otherwise conflicting port forward rules (e.g.: another rule for ports 500, 1701 or 4500)
There was an L2TP port triggering rule enabled, that I toggled on and off with no change
Verified the firewall on VPN server had an exclusion for L2TP, or that the firewall is off. (Firewall is off to reduce a layer of complexity, but it worked internally to begin with so I doubt that's the issue.)
Since it works internally, and there are no entries in the logs on the device indicating inbound connections, I'm convinced its an issue with the Verizon Actiontec router. But unfortunately, I'm not sure what else to try or where else to look to troubleshoot this. For instance, is there a log on the router that I can view in real time (e.g.: tail) that would show me whether or not the inbound connection attempt is reaching the device, and whether or not the device allowed or blocked it?
My router details:
Verizon Actiontec
MI424WR-GEN2
Revision E
Firmware 20.21.0.2
Verizon Actiontec built-in L2TP/IPSec rule templates. They're not currently in use, but are baked into the firmware for easy configuration/selection from a drop down menu.
Solved!
Go to Solution.normally a vpn on that router, will have a GRE tunneling protocol as well.
two ways to build the PF rules,
Manually
Preconfigured
I know the preconfigured VPN rules will do the GRE protocol as well, but if you do it by hand you can't get it. -
How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.
In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices. -
Port 8888 for MAMP-Apache vs. port 80 for OSX-Apache
I'm trying to set up MAMP and don't know whether to choose port 8888 for MAMP-Apache or port 80 for the OSX-Apache. I had read that you can't use port 80 if file sharing is turned on because you can't have two versions of Apache running at the same time.
Thanks for clarifying.
RamoneI had read that you can't use port 80 if file sharing is turned on because you can't have two versions of Apache running at the same time.
Mac OS X's built-in File Sharing uses port 548(AFP) and doesn't have anything to do with Apache.
(51933) -
Source port type for BPELProcess does not match target port type for EJB
Hi gurus,
I have a problem with calling EJBs from a 11.1.1.3 composite. The following summarizes the issue:
- there are several EJBs within the same package deployed on a WLS server.
- these beans have method names that are the same, for example create(), delete() etc.
- using the EJB Service Adapter I have created 3 References, one for each of the 3 beans I need to invoke in a BPEL process.
- each bean is imported into the project with their own *.wsdl *Ref.wsdl files.
- each wsdl imports a namespace based on the java package name
- now i have 3 wsdls, importing the same namespace and namespace conflicts arise.
At this point I'm thinking, 'no problem, just change the namespaces manually'
- whenever i try to change the namespace that JDev gives the Reference components I end up with the compilation error:
Source port type for "BPELProcess" does not match target port type for "EJBRef"
It seems that the namespace must be the same as the package name, even though I resolved all the references to the new namespaces and ensure they all match.
The problem appears to be in the BPELProcess.componentType file.
<reference name="HelloEJBRef" ui:wsdlLocation="HelloEJBRef.wsdl">
<interface.wsdl interface="http://package.workspace.com/HelloEJB#wsdl.interface(HelloEJB)"/>
</reference>
If the namespace (text before the #) is changed at all from the default, even if it matches the wsdl, results in the port type mismatch error above.
Any ideas?
btw, running SOA 11.1.1.3, JDev 10.1.1.3, EJB 3.0Hi gurus,
I have a problem with calling EJBs from a 11.1.1.3 composite. The following summarizes the issue:
- there are several EJBs within the same package deployed on a WLS server.
- these beans have method names that are the same, for example create(), delete() etc.
- using the EJB Service Adapter I have created 3 References, one for each of the 3 beans I need to invoke in a BPEL process.
- each bean is imported into the project with their own *.wsdl *Ref.wsdl files.
- each wsdl imports a namespace based on the java package name
- now i have 3 wsdls, importing the same namespace and namespace conflicts arise.
At this point I'm thinking, 'no problem, just change the namespaces manually'
- whenever i try to change the namespace that JDev gives the Reference components I end up with the compilation error:
Source port type for "BPELProcess" does not match target port type for "EJBRef"
It seems that the namespace must be the same as the package name, even though I resolved all the references to the new namespaces and ensure they all match.
The problem appears to be in the BPELProcess.componentType file.
<reference name="HelloEJBRef" ui:wsdlLocation="HelloEJBRef.wsdl">
<interface.wsdl interface="http://package.workspace.com/HelloEJB#wsdl.interface(HelloEJB)"/>
</reference>
If the namespace (text before the #) is changed at all from the default, even if it matches the wsdl, results in the port type mismatch error above.
Any ideas?
btw, running SOA 11.1.1.3, JDev 10.1.1.3, EJB 3.0 -
INST-08010: Error in validating the port range for auto port allocation
Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
My Operating System below:
Linux Red Hat 5.9 X86 64bit
My uname -a are below:
Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
My /etc/hosts file are below:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
10.10.80.19 redhat59
My /etc/sysconfig/network are below:
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=redhat59
GATEWAY=10.174.27.228
My /etc/sysconfig/iptables are below:
# Generated by iptables-save v1.3.5 on Tue Dec 3 17:01:17 2013
*filter
:INPUT ACCEPT [425:33860]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [307:40164]
COMMIT
# Completed on Tue Dec 3 17:01:17 2013
My ifconfig are below:
eth0 Link encap:Ethernet HWaddr 52:54:00:55:9B:C9
inet addr:10.174.27.233 Bcast:10.174.27.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:110668992 (105.5 MiB) TX bytes:209784134 (200.0 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:257845896 (245.9 MiB) TX bytes:257845896 (245.9 MiB)
my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.174.27.255
HWADDR=52:54:00:55:9B:C9
IPADDR=10.174.27.233
NETMASK=255.255.255.0
NETWORK=10.174.27.0
ONBOOT=yes
Have any suggestion please?
Many Thanks
DIn setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !! -
I am installing OBIEE 11.1.1.7.0 on a linux x86 version. I get the below error when running the installer: [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL. [VALIDATION] [SUGGESTION]:Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL. [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [ERROR]:INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). installation Failed. Exiting installation due to data validation failure. Solution suggested on other post is below: your hosts file have duplicate name that point to two different IP addresses. 10.37.29.1 test1.xyz.com 10.10.10.1 test1.xyz.com But in my case, My host file has different entiries as shown below: 169.36.71.228 usl20027808.am.hedani.net usl20027808 169.36.72.9 usl2002788.am.hedani.net usl2002788 Please suggest!
In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !! -
NAT configuration and Port Mapping for xBox
I'm looking for help with port mapping to open up the NAT for an xBox One. I'm working with the following network devices:
xBox One
DSL Modem: Embarq (ZyXEL) 660R series
Airport Extreme version 7.7.3
I understand the following from researching the issue:
The default settings for both devices block the ports needed for xBox Live.
Airport Extremes are not on the compatible list for xBox.
Port Mapping is better then creating a DMZ for the xBox.
The xBox needs its own manually set IP address.
I switched my Network>Router Mode from Off (Bridge Mode) to DHCP and NAT. I then created a DHCP Reservation and the Port Settings for that IP.
After doing this, the Airport would restart and display a warning - Double NAT. I figured this was because the 660 settings showed the NAT Mode to be SUA Only. The Edit Details link displayed an empty table where you edited the SUA/NAT Server Set. I switched from NAT Mode>SUA Only to None. So there was my Double NAT and I would have thought that would have removed one.
I also disabled the Firewall and Enabled the UPnP.
After restarts the Airport continued to display the Double NAT error. However, with the 660's NAT Mode set to None, the Internet was not there. Web browsers and email accounts replied with server not found.
Only with the 660 set to SUA Only and the Airport in Bridge Mode is the Internet accessible. I now have the details for the SUA filled out for the xBox's IP address and ports.
Hypothesis
Since both devices are acting as DHCP servers the port mapping is not working. Rather then have the 660 distribute IP addresses and then having the Airport distribute another range of numbers, I need to have both devices bridge and distribute one range of numbers. Currently the 660 is using the 192.168 range and the Airport is using the 10.0 range.
Am I correct? Any thoughts and suggestions are welcome.Port forwarding through a double NAT.. is near impossible.. !!
And the xbox is so attuned to using UPNP it is very hard not to.. even port mapping is not a great fix. Since apple decided gamers did not count as users for Airports.. I think honestly it is best to bypass the airport and stick to upnp from the modem router.
What method of authentication does your ISP use? Because it is really better to use one router.
And in fact the router should be the Zyxel. If you plug the Xbox to the Zyxel running in full router mode, with the airport removed from the network does it work and open NAT??
If not replace the Zyxel with a modern listed router that is xbox compatible and bridge the airport to it. -
G5 Firewire-ports poor for audio interfaces??
Hello. I have reason to believe that the FireWire-ports on the new G5:s are not really stable enough to handle an audio interface. Storage devices are okay (much less complex protocol).
My G5 constantly loses contact with my Digi 002R interface, or chokes on CPU even on low level usage, and on the Pro Tools forum many users have experienced this. The G4:s had much more stable FW-ports!
For some users it helps to use only one of the two FW400-ports, not both.
Is this a known issue? Has Apple ever commented on this? Does the warranty cover this? (It should)
Niljam, new to this forumI recently switched from a MOTU 828 running off the FW400 connector on the back of my G5 to a Yamaha mLan-based solution.
When I switched to mLan, admittedly running potentially tons more channels in/out, the internal FW bus "fell over" (connector on the front and the 400 and 800 connectors are all on the same bus no matter it turns out).
I popped a PCI firewire card and the audio stuff worked MUCH better, it was immediate. That's not to say that things work perfectly now... if the machine has been in sleep mode for a while, mLan's autoconnector hangs quite severely, whereby it's not even possible to force quit it... really ugly actually.
at any rate... for 8 in/out, certainly on MOTU, the on-board FW will "do", but it's probably best to get another FW card, especially if you're going to put sample libraries etc on an external FW drive, then you'd want that to be separate from the audio streams...
hope this helps!
Michael
g5.2x2.0 Mac OS X (10.4.3) -
We're using SharePoint 2010, I'm the system admin for a SharePoint farm. We enabled SharePoint Search by adding a Search Service APplication. One of the crawl report timer job is failing every 5 minte with the error "Cannot connect to remote server".
After digging around, we found that the server running the timer job tries to connect to the SearchAdmin.svc on the index server, over HTTPS / port 32844 However, communication over SSL via a non default port is blocked by our firewall.
According to this article: https://technet.microsoft.com/en-us/library/cc262849.aspx the default is HTTP for communication
between web servers. How is it possible that it's trying to connect over SSL?Hi,
Quoted from
https://technet.microsoft.com/en-us/library/cc262849.aspx#ServiceApp :
You can change the protocol and port binding for each service application. On the Service Applications page in Central Administration, select the service application, and then click
Publish.
Here is an article for configuring Windows firewall port rules for SharePoint using PowerShell in case you need:
http://www.xylos.com/default.aspx?id=1050
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
Is this an OpenSSL or httpd or JAVA problem ???
Hi All. Problem: Netscape 6.2 will not "redirect" from http://my.first.dom to https://my.secure.dom Objective : from first web-site, create a link to a secure web-site in index.html using an anchor e.g. ClickMe Set up : Apache2 httpd + mod_ssl + Tomc
-
How does VISA serial write work?
I am using LabView 6.0 and the VISA functions to run a distributed sensor network using RS-485 from a NT 4.0 machine. In order to work properly I have to manually control the RTS line which isn't a problem using the property node. Here's what I want
-
Glow effect on touch event on spark button flex mobile 4.5
hi, i want to create a glow effect not on all the spark button when i touch it but only on the touch area. can it be done on mobile? how?
-
Hi all, I would like to create a byte type which is 256bytes in size compressed. How can I fill up a byte type with compressed data? I can use a compress file and read it into the byte either. I need to create random data and compress it. byte test[]
-
IPhoto Library Backed Up to EHD. How do I transfer images to Windows 7 PC?
I recently backed up an iPhoto library from a Mac Desktop PC to an external hard drive following specific instructions attained from Apple, including formatting the EHD for Mac OS first. I am now trying to transfer/copy/move the image files from the