Port settings email

I have Verizon email and use a Mac. I use Mail to get my email from multiple addresses (2 verizon.net, 2 gmail, 1 yahoo) into one inbox.
Back when the emails started coming about changing to the pop and smtp servers, I changed the settings for all accounts. I am still getting the "change your settings" email.
Is Verizon just being repetitive or I am supposed to change these settings somewhere else? Btw, the settings have also been changed on my iPhone.
Thanks in advance,
Allyzabethe

Not sure this falls into same message category, but hope you can help. I can't set up two mail accounts.
I have attempted to set up two Mail Accounts so that I have two different smtp out going options. At home I use smtp.west.cox.net which worked no matter where I was located outside my home, including in San Francisco when I purchased the phone, until last Thursday when my outbound emails stop sending when located away from home. The cox.net still works while I'm in range of my wireless server at home.
Problem 1: No matter what attitional account i attempt to set up last, it replaces whatever account is already set up with the new server info and the account name as well.
iPhone support told me to set up the account - smtp1.attglobal.net - to use when I'm away from home to solve the problem. It didn't work. And replaced my cox.net account on the iPhone.
Genius bar told me to set up cwmx.com. And it replaced my cox.net account on the iPhone. It didn't even work in their store.
Problem 2: After a combined 2.5 hours, the Genius bar finally told to set up another email account on Yahoo so I'd have different settings.
I now have no confidence in iPhone support or the Genius bar as the answer was more of an 'I don't know try this', than 'this is the solution.' Is there a solution that doesn't involved setting up yet another email account with another provider?

Similar Messages

Why does the port settings on my iPad change every time I sync with my computer. After syncing I have to go in and change the port settings so I can send and receive emails on my iPad.

Every time iSync my iPad 2 with my computer it changes the port settings. Has anyone else had this issue?

When you sync the iPad, do you have mail settings configured to sync to the iPad? You could have different settings on your computer that might be affecting the email set up on the iPad when you sync.

Outgoing email port settings

I am having trouble sending email throught my insightbb account via my iPhone as it keeps telling me to check my outgoing server settings. Insight tells me that it is because the outgoing server port must be set to 460, however I cannot find any way to edit the port settings on the account. Any ideas?

Not sure this falls into same message category, but hope you can help. I can't set up two mail accounts.
I have attempted to set up two Mail Accounts so that I have two different smtp out going options. At home I use smtp.west.cox.net which worked no matter where I was located outside my home, including in San Francisco when I purchased the phone, until last Thursday when my outbound emails stop sending when located away from home. The cox.net still works while I'm in range of my wireless server at home.
Problem 1: No matter what attitional account i attempt to set up last, it replaces whatever account is already set up with the new server info and the account name as well.
iPhone support told me to set up the account - smtp1.attglobal.net - to use when I'm away from home to solve the problem. It didn't work. And replaced my cox.net account on the iPhone.
Genius bar told me to set up cwmx.com. And it replaced my cox.net account on the iPhone. It didn't even work in their store.
Problem 2: After a combined 2.5 hours, the Genius bar finally told to set up another email account on Yahoo so I'd have different settings.
I now have no confidence in iPhone support or the Genius bar as the answer was more of an 'I don't know try this', than 'this is the solution.' Is there a solution that doesn't involved setting up yet another email account with another provider?

What is "server port" in email settings

How do I determine the "server port" in email setting?

Yes, that's the size of the web data for the particular site. Its contents is as I stated above.
You have the option to delete the data (at the bottom) if you don't think the space being used is worth the added value the data offers.

How to Change Port settings on Satellite L25-S2161

I'm working on this system for a friend. System runs XP Home Edition, SP2. There are 4 user profiles-all administrators. The family recently moved to Verizon/FIOS as their internet provider.
With two users I can log on, connect to the network wirelessly, and surf the net using IE or FF. When I log onto the system with the son's profile, the network shows connected, but I can't connect to the internet with any browser. When I run wireless repair, the message states that the http port (80), https port (443), or FTP port (21) settings might be blocked.
When I go to Device Manager to check the port settings, Ports is not shown, and it isn't shown on any of the entries.
There is no restore point set on the machine. The son is the only user with a large body of files, iTunes settings, and more, so I haven't wanted to delete his profile and start over. The same results happen when I take the system home and log onto my linksys network.
Anyone have recommendations for next steps?

I haven't wanted to delete his profile and start over.
Do it this way.
How to copy data from a corrupted user profile to a new profile in Windows XP
Be sure to import the email messages and addresses before deleting the old profile.
-Jerry

Push Settings - Email Messages

Hi,
I am running Groupwise Mobile Server 3 in a Suse Linux 11sp1 virtual environment. Everything works perfectly except that the "filter setting" in Push Setting-Email Messages seems to have no effect.....
Any ideas would be great.
Regards
John

Kool, thanks
>>> Martin Ehlers<[email protected]> 01/09/2010 08:38 >>>
No, i will be open an SR.
Regards
Martin
>>>
Von: John Gill<[email protected]>
An:novell.support.groupwise.mobile-solutions
Datum: 08:06 01.09.2010
Betreff: Re: Antw: Push Settings - Email Messages
mmmh, not much support here ;) Anyway, I open up port 3102 on the firewall but the "filter" still does not work. Any new developments on your side?
Regards
John
>>> Martin Ehlers<[email protected]> 30/08/2010 15:34 >>>
Hi,
the same question I just wanted to ask also. I tried new profile, user settings etc. - emails always pushed to device?!
Sorry, i have no idea and hope to get an answer here.
Regards
Martin
>>>
Von: John Gill<[email protected]>
An:novell.support.groupwise.mobile-solutions
Datum: 14:51 27.08.2010
Betreff: Push Settings - Email Messages
Hi,
I am running Groupwise Mobile Server 3 in a Suse Linux 11sp1 virtual environment. Everything works perfectly except that the "filter setting" in Push Setting-Email Messages seems to have no effect.....
Any ideas would be great.
Regards
John

HT3819 Since the last AppleTV update I can no longer use home sharing. chI have checked all IDs, rebooted iTunes, AppleTV, and my router, eck port settings in my firewall. Nothing works. Is it me or did this update screw things up?

Since the last AppleTV update I can no longer use home sharing. I have checked all IDs, re-booted iTunes, my router, and AppleTV, and checked the port settings in my firewall. nothing works. Is it me or did this last update really scew things up?

Hi,
I tried everythink, but same as before!
- droppings ot the main screen
- loosing Home Share
now even on iPads !
Frustrating!
I'm now more than convinced that this is caused by the latest iTunes version.
As some others stated in other threads .... it seems that Apple doesn't really take care of this problem. So what if, if we could make them feeling the same pain as we do. ... Just by dropping them a mail as soon as we have the problem again. Not more often, we don't want to be unfair, but everytime it happens.
I found this feedback site http://www.apple.com/feedback/itunesapp.html
I will start now with this.... maybe this will help to rise a little bit of attention
Tweety
This is the mailbody I always use
Hello all,
Since the last update to iTunes Version 10.6.1 (7) streaming content (Movies and TV shows) to Apple TVs and iPads has two major problems:
- Home Sharing is lost during streaming (streaming stops even if a large portion of the content is already preloaded)
- streaming stops and the main screen pops up (Home Sharing still available)
This happens sometime after some minutes, sometimes after several hours, but it surely happens.
I followed every advice I could found on this support website. There are now a lot of threads following this issue.
Sometimes it seems getting better, but hours later the same isues occured again. Watching content on this enviroment is a real pain and very frustrating.
As many others I'm now convinced that the latest update of iTunes caused this problem.
Our family enviroment contains the following Apple products:
- iTunes on a Win7 32 bit Noname PC (all content)
- second iTunes on a iMac with OS 10.6.8 (all content)
- third iTunes on a MacBook Pro with OS 10.6.8 (daughter, only selected content)
- fourth iTunes on a Win7 32 Samsung Notebook (son, only selected content)
- all iTunes sharing the same Home Sharing ID
- 2 Apple TV second generation
- 1 Apple TV first generation
- 2 iPod touch (bought last year)
- 2 iPads (second generation)
all firmware or software are on latest available patchlevel.
At this moment, I can not recomend to others to buy this products.
I will drop this feedback everytime my famiily and I facing this problem... just to help you to get a better feeling of the urgency of this issue.
Thanks for every effort in advanced.

Instrument I/O Assistant refuses to save serial port settings

(I'm using Labview 7.1 on
Windows XP)
I have a problem communicating with a device over a serial port using my lab
computer. The serial port is the only port on the device.
I have successfully communicated with the device on this computer using
windows HyperTerminal.
I have successfully communicated with the device through Labview on another
computer.
I am using the Instrument I/O assistant to get things up and running, this
worked fine on the other computer, but on this computer there are problems.
When I click on COM1port "properties" in the "select
device" pane I get the "Edit vesa resource" dialog, but it comes
up with a "port settings conflict", it says:
"The Vesa port settings are different from the Windows port settings. Select the
settings you want to keep."
Whichever settings I choose, when I hit save I get a dialog box with the
message "could not write specified port settings to the operating
system." So it won't save the settings and so it won't work when I run the
vi. (I know the right settings and they work in HyperTerminal, Labview just
won't accept them.
Can anyone help?
thanks,
Luke
Luke_A_P

I have solved the problem!
It seems that admin rights are needed to save the settings, this seemed odd to me since HyperTerminal did not need them and I could change settings in device manager (which didn't help in itself). But, trying Labview with an admin logged in allowed the settings to be saved.
Luke
Luke_A_P

Cannot select outlook in sharing - email settings - email client

I am trying to use PE11 with Outlook 2013 on Win 7. When I go into preferences under sharing -> email settings -> email client, I only see the default Adobe email service, I have no option for Outlook 2013 which is my default. I've looked around within Windows default program associatings and for sure Outlook 2013 is my default, is associated with all email types (.eml, etc).
I have searched all the forums and the net and am not seeing a solution. How can I force PE11 to see Outlook 2013? I'm guessing it must be a registry hack. I've seen a .reg to add Windows Live, so does anyone have a hack to add Outlook 2013 ?

For anyone still struggling with this, here's a decent workaround:
http://helpx.adobe.com/photoshop-elements/kb/freeze-or-error-no-email.html
Install Windows Live Mail and configure a single POP account as you have configured in Outlook. PSE's "preferences->sharing" will find Live Mail as an option for email accounts (you don't even need the registry hack the article above recommends, nor does Live Mail need to be your default email client).
I just email the files to a single contact I've created in adobe for myself, avoiding the hassle of adding contacts in Adobe's contact manager or Live Mail, I get the email in Outlook and then resend the files out using my Outlook addressbook. A kludge, but at least I can email pix now from the PSE photo manager.
I'm thinking that re-installing MS Office might be a solution but don't want to deal with that hassle.

My ipad 2 cant show settings email, contacts and calenders

Just bought a new iPad2. Trying to set it up. I've setup a Gmail, and thats working fine. Now I would like to setup a pop mail. When I try to access the >settings>email, contacts and calender menu, the iPad just exits the >settings menu and shows the "desktop". I cant seem to setup an additional mail from the mail program, so I need to access the settings menu.
I've tried to reboot the iPad, but to no avail.
I dont know if this matters, but I also seem to have problems with syncronizing pictures to my iPad through iTunes. The folders are present on the iPad, but there are no pictures in the folders. It seems odd, particularly since the status of the iPad in iTunes is that there seems to be 2,3gb of pictures on it.
I'm quite the green apple, so any help would be appreciated.
Cheers
Jannik

Assuming you have iOS 4.3 as your tagline suggests, its because the Software Update button was only added in iOS 5. and was not available in previous versions. Like the 4.3 you currently run.
You'll need to connect your iPad to a Computer running iTuines (Can be a Mac or a Pc doesn't matter) and follow the update prompts.
You'll probably want to back up the iPad before updating though.
In the article you came from, Scroll down to the section titled: Update your device using iTunes

Mail port settings not sticking

I'm having trouble with port settings not sticking in mac mail. When I start Mac Mail (v5.1, running in Lion) the program won't read mail in my iCloud account because the port settings are incorrect (port 143). I click on the "Use SSL" box, which changes the port setting to 993. I save the changes and everything works fine until I quit and restart the program. The port settings revert to 143 and the SSL box is unchecked. The issue, obviously, is that the changed settings are not being saved. I deleted the iCloud IMAP account and reinstalled. It reinstalled with the correct 993 SSL setting, but as soon as I quit the program and restarted, it reverted to 143, no SSL. Anyone have an idea what is going on?

To solve the problem of mail port seetings not sticking required deleting the Accounts.plist in this mail directory:
~/Library/Mail/V2/MailData/Accounts.plist

LOST MY PREFERENCES, SETTINGS, EMAILS, PHOTOS, ETC. - HELP!!

Last night my computer was acting funny. So I restarted it. When I logged back into my account the first thing I noticed is that my Dock was back to it's default setting. Then I noticed the email was back to default, iPhoto, iTunes all back to default and all missing the files.
All my email is gone but all my applications, third-party software and files are still there. So I'm guessing my admin settings are gone.
After looking through the forum, I noticed that when this happens, it's usually because the HOME name has changed. This is not the case with me. The HOME name has not changed. What could be the reason for this loss?? How can I get all my settings, emails, photos and music back?? Will something like Disk Warrior fix this? (BTW, I'm not doing anything with the computer until I get some kind of feedback).
Thank You for your help in advance!

Allen
Well the permissions on your Library folder aren't right, and where are your Movies, Music, Public and Sites folders?
If we fix your Library permissions, you may possibly find a few things get better, so do that (copy and paste again):
chmod 770 ~/Libraryalthough there may be further problems inside that folder.
I should have asked for more information, since I didn't realise that
The original home name is PowerMac2 … "PowerMac2b", "PowerMac3", "PowerMac2_new" and "PowerMac2c" are all users I made
According to your output your user name should be PowerMac. I think we'll need to resort to Terminal again to find out exactly what you've done.
Open the Terminal (from /Applications/Utilities) and copy and paste the following into the Terminal window, one line at a time, with a return after each line:
id
ls -ln /Users
nireport . /users uid gid name realname home | awk '$1>500 {print $0}'Copy and paste all of the output (include your commands) and post it here.
If you have any idea what happened to those missing folders, say so.

Set-VMNetworkAdapterVlan throws Failed while applying switch port settings 'Ethernet Switch Port VLAN Settings' error

Hi,
I'm following this
guide I'm getting an error when running the below command:
Set-VMNetworkAdapterVlan -vmname PurpleVM1 -Isolated -PrimaryVlanId 2 –SecondaryVlanId 4
Generates the following error:
Set-VMNetworkAdapterVlan : The operation failed.
Failed while applying switch port settings 'Ethernet Switch Port VLAN Settings' on switch 'New Virtual Switch': One or
more arguments are invalid (0x80070057).
A parameter that is not valid was passed to the operation.
Does anyone know why this is happening?
ta

Hi TomG101,
It seems that there is a configuration conflict on the virtual switch port .
Also I tested the command on my lab , it works .
For troubleshooting please create a new virtual switch then try to configure again .
Any further information please feel free to let us know .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to change port settings? on macbook pro 15"

hi all, I am trying to sync my phone from my Mac and the software im using has a default port it sends to so how to i manually changes port settings for port 1? thank you.

are these COM ports or TCP/IP ports? Give us a little info on this software.

Can't update with new network port settings in airport extreme

I had 3 device settings under the Network tab in AirPort Utility. 3 in DHCP Reservations and 3 in Port Settings. They worked fine for a year or two. I just added a new device and added it's settings in both panels. I added the Public and Private TCP Port settings and saved. (When re-opened, they were still there). Clicked Update and the router rebooted, but when I re-opened the Port Settings for the new device both TCP Port fields were empty. After many more attempts, including changes to the port number, I tried removing and re-entering the settings for an existing device that had been working. Now, it's settings would also not survive an update and would also disappear. I reinstalled AirPort Utility and trashed Airport prefs, but nothing works. I tried through my laptop, but same problem, so not software. I'm about to do a hard reset of the router. Does anyone have a clue as to what might be going on???

I think you need to provide more information about what you've done and what you're trying to do.
Did you assign a static LAN IP address to the NAS, what are your port forwarding entries, etc?

Port settings email

Similar Messages

Maybe you are looking for