Portal database information
Hi All,
Please let me know how i can find the information about portal database (like whethere it is SQL or oracle ) in my EP system.
Thanks
Suresh.
open your portal as
http://myportal.com:50000
This will open SAP J2EE engine page
click on system information
and check your database details.
It also contains many other details of your portal.
Raghu
Similar Messages
-
Dynamic page information from the portal database?
Is it possible to get information about existing dynamic pages from the portal database? We're upgrading our portal from 9.0.4 to 10.1.4 and because we will be running the new version on a different platform, we can't run any upgrade scripts and need to build again from scratch. I was hoping I could pull dynamic page information from a portal view or table into a spreadsheet, to save our developers having to click into each dynamic page application in the old version to get the pl/sql code to copy and paste into the new version. The generated dynamic page packages just have api calls, so it may be possible that there's an api to do this. Does anyone know if this is possible, and if so, how to do it? Thanks.
closing the thread
-
Portal Database -- What it is? Can we store data in Portal itself?
Hi Experts,
Can you please let me know what is portal database?
Can I store some information like Emp No and Tel No in Portal itself?
Regards,
GauravHi Gaurav,
1.Portal Database holds the portal related data like iviews,worksets,pages, roles etc.
Refer to [How the Portal Works|http://help.sap.com/saphelp_nw04s/helpdata/en/42/BFA145731B1D64E10000000A1553F6/content.htm]
2. Emp No and Tel No are generally for the users, so it depends on how you configure your UME.
http://help.sap.com/saphelp_nw04/helpdata/en/da/9cd53f779c4e21e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7e/a2d475e5384335a2b1b2d80e1a3a20/frameset.htm
Also refer to SAP Note 780679
SAP Note 718383
Good Luck!
Sandeep Tudumu -
No data in Portal Database tables for Activity Report
Hi experts,
I've developed an Activity Report application in SAP Portal 7.0, which went live but the report shows no data.
We are pulling data from 2 portal database tables: WCR_WEBCONTENTSTAT and WCR_USERPAGEUSAGE
In non production environment there is data in the report but there is no data in the production environment.
The Activity Report service is already activated/started and set to true.
What could have caused this? And what should we check now?
What other configurations/setup should be done?
Regards,
GregHi Greg,
Those are the aggregated tables. If they are not filled with data although the Portal Activity Report is activated, you should check whether the aggregation finished successfully.
In the older SPs there were some problems that were fixed in later SPs of 7.0.
In order to have the latest version of Portal Activity report, you can check SAP note 1084379 - Portal Activity Report - Latest Version (SDA file).
You can compare the SP via the MANIFAST file, as it contains the version and SP number.
In order to troubleshoot problems in Activity Report, you can follow SAP note: 1690023 - Portal Activity Report - Component-specific Note
Some basic checks that you can do:
Run query on the raw data tables to check since when there is data in those tables:
select min(timestamphour) from SAP<SystemID>DB.WCR_WEBCNODESTAT;
If there is too much data from long time ago, then you should delete the old data, and leave only the new data (there is anyways retention time for the data to be kept).
If there is no data, then it means that the Portal Activity Report does not collect data, and not really activated (usually this is not the case).
The aggregation runs every top of the hour, so you can check in the default traces for an error during that time.
In most of the cases something went wrong while aggregating the data.
As a result the aggregation is not finished, so the transaction is not being committed, and the aggregated tables stay empty.
If there is a DuplicateKeyException in the trace, you can follow SAP note 1054145 - Duplicate Key Exception.
If you have any more questions, please don't hesitate to ask.
I hope this information helps,
Thanks & regards,
Michal Zilcha-Lang -
Creating Custom Tables in the Portal Database
Is there a way to create custom tables in the portal database in EP6?
Thanks,
MelissaThanks for responding, Nick.
We want to be able to display informational messages on the logon page before the user logs in. Currently we make changes to several ASP files in EP5 to display the messages. We want to be able to give privileged users the ability to enter the message, enter start/end date, etc. We want to do this in EP6 as well. -
Retriving user details from user rofile in portal database
HI all,
any one knows how to retrive user details from user rpofile in portal database. I am using webdynpro appliction.Please reply.
Thank you
MaruthiHi maruti Rao ,
All Gives U gud Idea..here i give u some brief procedure.First of all u need to add 2 jar file in ur project structure for proper working of "com.sap.security.api.IUser" Interface. After that for retriving Users data Stored on LDAP Server.
If you are using an LDAP directory as a data source for your user-related data, the logical attribute names used by the Java application programming interface (API) of SAP User Management Engine (UME) must be mapped to the physical attribute names used in the schema of your corporate LDAP directory.
Example Data-Source File is as Below From Where U can Get All The Information of Logged user...
<dataSources>
<dataSource id="CORP_LDAP"
className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
isReadonly="false"
isPrimary="true">
<responsibleFor>
<principal type="account">
</principal>
<principal type="user">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname" populateInitially="true"/>
<attribute name="displayname" populateInitially="true"/>
<attribute name="lastname" populateInitially="true"/>
<attribute name="fax"/>
<attribute name="email"/>
<attribute name="title"/>
<attribute name="department"/>
<attribute name="description"/>
<attribute name="mobile"/>
<attribute name="telephone"/>
<attribute name="streetaddress"/>
<attribute name="uniquename" populateInitially="true"/>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="group">
</principal>
</responsibleFor>
<attributeMapping>
<principals>
<principal type="account">
</principal>
<principal type="user">
<nameSpaces>
<nameSpace name="com.sap.security.core.usermanagement">
<attributes>
<attribute name="firstname">
<physicalAttribute name="givenname"/>
</attribute>
<attribute name="displayname">
<physicalAttribute name="displayname"/>
</attribute>
<attribute name="lastname">
<physicalAttribute name="sn"/>
</attribute>
<attribute name="fax">
<physicalAttribute name="facsimiletelephonenumber"/>
</attribute>
<attribute name="uniquename">
<physicalAttribute name="uid"/>
</attribute>
<attribute name="loginid">
<physicalAttribute name="null"/>
</attribute>
<attribute name="email">
<physicalAttribute name="mail"/>
</attribute>
<attribute name="mobile">
<physicalAttribute name="mobile"/>
</attribute>
<attribute name="telephone">
<physicalAttribute name="telephonenumber"/>
</attribute>
<attribute name="department">
<physicalAttribute name="ou"/>
</attribute>
<attribute name="description">
<physicalAttribute name="description"/>
</attribute>
<attribute name="streetadress">
<physicalAttribute name="postaladdress"/>
</attribute>
<attribute name="pobox">
<physicalAttribute name="postofficebox"/>
</attribute>
<attribute name="preferredlanguage">
<physicalAttribute name="preferredlanguage"/>
</attribute>
</attributes>
</nameSpace>
</nameSpaces>
</principal>
<principal type="group">
</principal>
</principals>
</attributeMapping>
</dataSources>
regard's
Dheerendra Shukla -
Portal internal information storage
Hi,
Please let me know where does all the internal information (such as iviews,roles,pages, user management information like all user names and passwords) in portal gets stored.
Regards,
GirishHi,
1. Are you looking to access the portal database (Schemas) using JSP.
You can do it in normal way. Before that you have to create your own schema.
Dont mess with Portal schema.
2. After building the jsp page you have to deploy that into the oc4j_portal component
then add your jsp into your portal page.
Regarding the DB connections you have to access as you access a normal database.
Regards,
Vijay.B -
Unable to load database information
Hello All,
I am facing an issue while scheduling a crystal report from CMC or Infoview. When I schedule the report It throws an error saying "Unable to Load Database information". The report's data source connection is oracle database.
I have provided the database credentials,format and destination in CMC/Infoview. The BOE environment is as follows:
OS: Windows 2008 server 64 bit
BOE: Business Objects 3.1sp3, Crystal reports 2008 sp3
Oracle Client: oracle 11g 32 bit client
When I change the connection from oracle server to ODBC connection the report works fine. Is there any steps I am missing or is there database drivers connectivity issue because BOE and oracle are 32 bit client and OS is 64 bit client.
All the suggestion/answers are appreciated.
Thanks in advance...First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
I tried to ping my database and was unable to find the host. I was under the assumption it was using TNSNames which is able to resolve.
How can I validate the permissions?
As I said I'm a little lost here. Apologies if I ask stupid questions. -
Failed to load database information. Error in File temp_
Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Dim crReportDocument As New CrystalReport3()
Dim DataSet1 As DataSet
Dim adoOleDbConnection As OleDbConnection
Dim adoOleDbDataAdapter As OleDbDataAdapter
Dim connectionString As String = ""
connectionString = "Provider=OraOLEDB.Oracle;"
connectionString += "Data Source=ourdb;"
connectionString += "User ID=ouruserid;Password=ourpsw"
adoOleDbConnection = New OleDbConnection(connectionString)
Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
DataSet1 = New DataSet()
adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
crReportDocument.Refresh()
crReportDocument.PrintToPrinter(1, False, 0, 0)
DataSet1.Dispose()
adoOleDbDataAdapter.Dispose()
adoOleDbConnection.Close()
adoOleDbConnection.Dispose()
crReportDocument.Dispose()
Me.Close()
End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
<system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
BruceLooking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce -
Unable to retrieve Object. Failed to load database information
I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
CrystalReportViewer
Error in File 180+DAYREP.EWARP: Failed to load database information.
Unable to retrieve Object.
Error in File 180+DAYREP.EWARP: Failed to load database information.
I have done some research on this but no luck on resolving the issue.
Any suggestions are welcome thanks.First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
I tried to ping my database and was unable to find the host. I was under the assumption it was using TNSNames which is able to resolve.
How can I validate the permissions?
As I said I'm a little lost here. Apologies if I ask stupid questions. -
Failed to load database information
Post Author: ramya
CA Forum: General
Hi,
We were using the crsyatl reports 9 for a desktop application that connects to a webservice.We had an issue with memory leak in crystal reports and hence we installed crystal reports 7 and upgraded that to crysta reports 9.We later installed the service pack 7 for the crystal reports 9 which has the fix for this memory leak .We are using the dlls Version=9.2.3300.0.But after upgrading and applying the service pack we couldnot even view the report in the report windows forms viewer.A error was displayed as C:\Inetpub\wwwroot\Application\Reports\CapitalReports\Building Reports\Comprehensive Reports\exreport.rpt ,Failed to load the database information .This was working fine before upgrading.We cannot find the solution.
Any help will be kindly appreciated. ThankRamyaPost Author: Mark Lemoine
CA Forum: General
In trying to diagnose this problem, we have obtained our own 64bit h/w, installed the same Windows OS, and installed the same components in the same order (to the best of our ability) as on the customer machine (Framework 2, IIS, SQL 2005, Framework 1.1, etc.).
On our server, the reports work fine! No exception "Failed to load database information" generated.
We've also updated the customer's machine with the latest updates from MS (Framework 2 sp1, Framework 1.1 sp1, OS updates, security updates, etc.), but no joy . The reports still fail with the described exception.
What can we do to diagnose this? Are there any trace or logging options in Crystal that can be turned on? Why weren't we able to replicate the problem?
Thanks
Mark -
Failed to load database information. When previewing report in CMC
I attempting to load reports that are from our accounting program. The account program uses a ProvideX driver and every report I add to the CMC displays the same results
Unable to retrieve Object.
Failed to load database information. File xxxxxxxxx.rpt
When I am listing my connection source for the report I have the following selected:
Use custom database logon information specified here
For the driver I am listing
MAS 90 4.0 ODBC Driver
Server = SOTAMAS90
DATABASE= ABC
USER= bmb
Password= password
If I have any other settings or if I just choose standard ODBC I get the following results
Unable to retrieve Object.
The database logon information for this report is either incomplete or incorrect.
I can view reports fine from my Access Database but the SOTASMAS90 is causing problems.
Any ideas?
Thanks in advance!
BrianI tried using the standard ODBC connection and I tried placing MAS 90 4.0 ODBC Driver in the custom driver.
If I go to my ODBC connections in my Administrative tools and select Add driver, the driver name that displays is MAS 90 4.0 ODBC Driver. So I was thinking that the CMC would be able to determine the driver if I used the same naming convention that was used by Windows.
I have some screenshots that I uploaded if you want to take a look. I figure this should just work.
Shows when I have selected the standard ODBC
http://i36.photobucket.com/albums/e31/bberrelez/image1.jpg
Shows when I specify a custom driver
http://i36.photobucket.com/albums/e31/bberrelez/image2.jpg
Displays the drivers I am able to choose from within CMC
http://i36.photobucket.com/albums/e31/bberrelez/image3.jpg
If I were to create a new ODBC connection in Windows
http://i36.photobucket.com/albums/e31/bberrelez/ODBC.jpg
Thanks helping me with this. I appreciate it! -
Error Failed to load database information - access report from jsp in linux
Hi,
While accessing the report from my jsp file I got the below error. I am using Crystal Report Server 2008 V1 in linux environment.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Failed to load database information.
Error in File rpt_dp_customer_stmt {9515FCCB-0245-11E0-9DA4-000C29D5AD7D}.rpt:
Failed to load database information.---- Error code:-2147482931 Error code name:failed
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
org.apache.jsp.formula_jsp._jspService(formula_jsp.java:117)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Moreover, in my jsp i am passing the data base parameter like below,
PropertyBag logonProperties = new PropertyBag();;
mainPB.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, logonProperties);
mainPB.put(PropertyBagHelper.CONNINFO_DATABASE_DLL, "libcrdb_jdbc.so");
logonProperties.put("Database Class Name", "oracle.jdbc.driver.OracleDriver");
logonProperties.put("Use JDBC", "true");
logonProperties.put("Connection URL", url);
logonProperties.put("Server", dbserver);
Also I set the LD_LIBRARY_PATH in linux machine, because i have the libcrdb_jdbc.so file on that path.
/home/ReportServer/bobje/enterprise120/linux_x86/crpe/Its working. I gave crdb_jdbc.dll name in the connection info
-
I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
export ORACLE_SID=summitdb
export ORACLE_HOME='/usr/lib/oracle/11.2/client'
export ORACLE_BASE='/usr/lib/oracle/'
export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
export PATH="$:/usr/lib/oracle/11.2/client/bin"
export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine. -
CR VS 2013 error: Additional information: Failed to load database information.
We have VS 2008 (V9.0.30729.1 SP1) using .Net 3.5 under Windows Server 2003 R2 Data Center Edition. VS 2008 came with Crystal Reports Version 10.5.3700.0. We developed a little report in a winform to run against Oracle 11gR2 using the OLE DB support in the CR Report Wizard in the VS 2008 IDE. It was a standard report with some code to print the report directly to the printer with out the viewer control. Here is the working code:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim crReportDocument As New CrystalReport1()
Dim DataSet1 As DataSet
Dim adoOleDbConnection As OleDbConnection
Dim adoOleDbDataAdapter As OleDbDataAdapter
Dim connectionString As String = ""
connectionString = "Provider=OraOLEDB.Oracle;"
connectionString += "Data Source=OURDBNAME;"
connectionString += "User ID=OURUSERID;Password=OURPSW"
adoOleDbConnection = New OleDbConnection(connectionString)
Dim sqlString As String = ""
sqlString = "SELECT * FROM edi_filing_source_lov where filing_source_code in ('A','E')"
adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
DataSet1 = New DataSet()
adoOleDbDataAdapter.Fill(DataSet1, "edi_filing_source_lov")
crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
crReportDocument.Refresh()
crReportDocument.PrintToPrinter(1, False, 1, 99)
Me.Close()
End Sub
End Class
We want to migrate this report to VS 2013. We installed VS 2013 Professional (V12.0.30110.00 Update 1) under Windows Server 2012 R2 Data Center Edition. We downloaded CRforVS_13_0_9 and installed it in VS 2013. We moved the project from VS 2008 and opened it under VS 2013. It looks like it converted OK. When we run it we get the following error:
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in CrystalDecisions.CrystalReports.Engine.dll
Additional information: Failed to load database information.
Error in File temp_f11eb1be-db98-4d33-800c-4db3b36ab14e {EEB2A9E4-8239-49CB-B016-8CE4F4C7643E}.rpt:
Failed to load database information.
More information: We can step through the wizard in VS 2013 using the standard template and add a report viewer control to the form and point it at the report and run it just fine in the VS 2013 IDE when there is no code in the form1_load event. We feel we have the Oracle.DataAccess.dll for the 11.2.0 client installed and tested correctly on the server and do not feel there is an issue with data base installation. When we add back the code above to the form1_load event and run it we get the error above.
We have the logger set up but nothing gets added to the log files.
We have tried three different ways to set the data source to resolve the error that is occurring at this line of code that is failing but with no luck:
crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.Database.Tables(0).SetDataSource(DataSet.Tables("edi_filing_source_lov"))
Do you have any other suggestions we could try?
BruceHi Bruce
In my experience, the only reason for the error is that the there is an issue with the dataset and as a back up sort of a thing, the report engine is attempting to connect to the database the report was created off of. To test the dataset with the report, see this wiki on how to.
Also, ensure that you have a look at this KBA.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Maybe you are looking for
-
HT201328 how about if i don't have the iphone with me, how can I unlock it?
how can i unlock an iphone if i don't have it with me?
-
Help - SYNC problem watching video on Fancast
On both of my computers , When I watch a video on Fancast and other sites that use Flash Player the video and voice is not in sync. The longer you watch the farther the voice and video gets out of sync. The voice is ahead of the video. The video is a
-
Acrobat is not letting me combine files anymore. It says an error has occured while converting. Why
When I try to combine my files, acrobat starts to get the files ready and then it shows that it has failed because of some error occurring. I even tried to combine files I have combined before and the same has happened to them, so I know that it is a
-
This is a little that irritates me on Lightroom. it's the Grey Border that goes around the whole screen on fullscreen mode and the little arrows that are in your faceon the edges when you have tabs hidden. For Most of the Phototogs we've been using t
-
Hi, Could you please tell me what is the lifetime support dates (Premier Support, Extended Support, Sustaining Support Ends) for JDeveloper 11g. Thanks.