Portal Roles added to the LDAP group is not showing up for users

Hello expert,
I have implemented SSO for Enterprise Portal and MS LDAP. It is working fine but when I assigned roles to the LDAP group instead of UME group, they are not taking effect when I refresh the browser. My service account that I set up in the keytab file is a read only account for the LDAP. Is there some permission issue that I have to do to be able to add Portal roles or groups to LDAP groups?

Hi,
By default the LDAP integration configuration file is readonly.
In this case, is not possible to modify data in LDAP.
You must to connect in read-write mode; and I think that, furthermore, you need to configure SSL between Portal and LDAP in order to use read-write mode.
regards,

Similar Messages

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

Acrobat XI Pro/Standard doesn't support MS Access 2010: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Third-party version/ Acrobat Version (ship date)
Acrobat 6
(April 2003)
Acrobat 7 (January 2005)
Acrobat 8
(November 2006)
Acrobat 9 (July 2008)
Acrobat X (November 2010)
Acrobat XI (October 2012)
MS Access
Office 97
x
x
x
x
x
x
Office 2000 (Office 9)
N/A
√
√
x
x
x
Office XP (Office 2002/Office 10)
N/A
√
√
√
x
x
Office 2003 (Office 11) (11/17/03)
N/A
√
√
√
√
x
Office 2007 (Office 12) (11/30/06)
N/A
N/A
√ (8.1)
√
√
x
Office 2010 (Office 14) 32 bit
x
x
x
x
√
x
Office 2013 (Office 15) 32 bit
x
x
x
x
x
x

I bought the season 7 pass for Doctor Who, but the new episodes are not showing up for download. Who can I contact to find out why?

I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download. I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John. Who can I contact to find out why I'm not getting the rest of season 7 for download?
Thanks,
ChristyQ

Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale. However, Apple states all sales are final.
Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software. They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed. Apple is the cashier. You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin. Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains. Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund.

The CAPTCHA code is not showing up for any website.

The captcha code isn't showing up for Firefox or IE9. I have tried clearing my cookies, going to safe mode, disabling plugins, pressing check "show pictures", everything. The captcha isn't working for any site. Please help.

Many times the CAPTCHA is hosted on a different server, in other words, it's a "third party" image. If your security/firewall/privacy software blocks third party images because some of them are likely to be web bugs, try turning that off to see whether it is a factor.

The payment group could not be authorized for payment:

Hi All,
I am facing one issue when ever I try to submit the order.Mention issues log below.
at java.lang.Thread.run(Thread.java:619)
17:30:09,608 INFO [CommitOrderFormHandler] DEBUG Acquired local write lock using id 140023
17:30:09,631 INFO [CommitOrderFormHandler] DEBUG beforeSet created transaction TransactionImple < ac, BasicAction: -53edde10:dc90:51a34807:1077 status: ActionStatus.RUNNING >
17:30:09,632 INFO [CommitOrderFormHandler] DEBUG no form errors - staying on same page.
17:30:09,635 INFO [CommitOrderFormHandler] DEBUG no form errors - staying on same page.
17:30:09,637 INFO [CommitOrderFormHandler] DEBUG no form errors - staying on same page.
17:30:09,720 WARN [ValidatePaymentGroupByType] Returning default transition value 0 for unregistered property value cashOnDelivery.
17:30:09,763 INFO [CommitOrderFormHandler] DEBUG PipelineError: key=FailedPaymentGroupAuth:pg50002; error=The payment group pg50002 could not be authorized for payment: The given PaymentGroup {0} cannot be processed because a processor was not configured for its type..
17:30:09,763 INFO [CommitOrderFormHandler] DEBUG adding form exception: FailedPaymentGroupAuth:pg50002: The payment group pg50002 could not be authorized for payment: The given PaymentGroup {0} cannot be processed because a processor was not configured for its type..
17:30:09,764 INFO [CommitOrderFormHandler] DEBUG root cause of exception: null
17:30:09,764 INFO [CommitOrderFormHandler] DEBUG Transaction Marked as Rollback - redirecting to: error.jsp
17:30:09,765 INFO [CommitOrderFormHandler] DEBUG afterSet sees currentTransaction as TransactionImple < ac, BasicAction: -53edde10:dc90:51a34807:1077 status: ActionStatus.ABORT_ONLY >
17:30:09,765 INFO [CommitOrderFormHandler] DEBUG afterSet committing transaction TransactionImple < ac, BasicAction: -53edde10:dc90:51a34807:1077 status: ActionStatus.ABORT_ONLY >
17:30:09,766 INFO [CommitOrderFormHandler] DEBUG Released local write lock using id 140023
Could you please give suggestion how to resolve this issue.
Thanks,
Raj

It seems like you have created a new payment group cashOnDelivery but have not configured the required property files required for its validation
1) In /atg/commerce/order/processor/ValidatePaymentGroupByType.properties add something as following
# Add a return code for your cash payment method
returnValues+=\
cashOnDelivery=5051
2) then in CommercePipeline.xml add the mapping for the integer value specified earlier to its validator processor, something as following
<pipelinechain name="validatePaymentGroup" transaction="TX_REQUIRED" headlink="dispatchOnPGType" xml-combine="append">
<pipelinelink name="dispatchOnPGType" transaction="TX_MANDATORY">
<processor jndi="/atg/commerce/order/processor/ValidatePaymentGroupByType"/>
<transition link="validateCashPG" returnvalue="5051"/>
</pipelinelink>
<pipelinelink name="validateCashPG" transaction="TX_MANDATORY">
<processor jndi="/atg/commerce/order/processor/ValidateCash"/>
</pipelinelink>
</pipelinechain>
3) Create a new ValidateCash component and its class(which implements a pipeline processor) and in this simply return the SUCCESS code, or put any validation logic that you want to put for validating your new cash paymentGroup.
This would solve the the current error you are getting,
and If the PaymentManager, PaymentPipeline(The new createCahInfo and ProcessCash processor etc),OrderTools component etc have been confgiured properly for your new payment group then you should be able to submit the order.
Thanks

LDAP Group is empty while the LDAP group have 150 users

Hi,
My BOE is mapped to the corporate LDAP, and the LDAP group is already mapped to a BO group.
The problem is that the LDAP Group is empty while the LDAP group have 150 users.
Currently, just after each user login at the first time the user is created under the BO Group.
Is there any way to populate the BO Group automatically?
Best Regards,
DoronS

Hi,
yes there is. Check your LDAP Authentication Tab and select "Create new aliases when the Alias Update occurs"
It should be under your Alias settings.
But please note that you than require 150 licenses. So each users gets a license even if he doesnt use the BOE System but is part of the LDAP Group.
Regards
-Seb.

How do I assign a user ID to the purchasing group so it shows up on table..

How do I assign a user ID to the purchasing group so it shows up on table T024? I'm trying to create a STO but am recieving the following error
Configuration of User ID is not set up in purchasing group T024 table
    Message no. 00398
Diagnosis
    Placeholder for batch input error text, this message is not output.
    Configuration of User ID is not set up in   purchasing group T024 table
Thanks in advance

Table T024 has no field for a user-Id in standard SAP
you can only tie a user to a purchsing group via authorization with user roles.
The message 00398 is a generic message that can be used for everything.
I guess this message is triggered in a userexit. Designed by a collegue of you.

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Photo from iMessage saved to my camera role, how come the saved photo is not available to edit with iPhoto on my iPhone?

When I save a photo from iMessage to my camera role, how come the saved photo is not available to edit with iPhoto on my iPhone?

I tapped a photo in Messages to vie it full screen.
Tapped the Share icon and saved it to my camera roll.
Opened iPhoto for iOS and my image library updated. After the update I could see the image in my camera roll. I selected the amera roll, then tapped the image I had copied from Messages. I was able to edit the photo with no problem.
Did you follow this same procedure or ry to copy the little thumbnail photo from Messages?

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

PY error message - EE's salary group could not be determined for Plan Life

We are running through Payroll errors when there is a Separation action being carried :
u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
On IT0168 the costs are u20180u2019
This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

During the "Separation" action, does the employee change WT on IT0008?
If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

Newly Created Branches not showing up for Recruiter in the Requisition.

Hi,
We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
Thanks.

Hi,
the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
Kind regards
Roman

I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

Portal Roles added to the LDAP group is not showing up for users

Similar Messages

Maybe you are looking for