Portal server 7.2 ASCTabContainer
HI All,
I have installed Sun Portal server 7.2 on Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs).Portal server is successfully installed but I am not able to find ASCTabContainer .
Plz tell me how to get ASCTabContainer in portal server 7.2
Thanks in Advance
Madhu
I also installed Portal 7.2 with remote X and I had no such problem.
Similar Messages
-
Configure WebSphere Portal Server to use LDAP (Oracle Internet Directory)
I did configuration for WebSphere Portal to use security with LDAP Oracle Internet Directory (OID). The script for configuring works well (WPSConfig.bat action-secure-portal-ldap)
But when i start Portal Server it cannot start successfully. I did check in log file and found a error on SystemOut.log as attachment log below. I don't know what happen with WebSphere Portal Server.
If you guys know how to fix it please let me know or point me some documents to configure this again.
Thanks in advanced.
Servlet E com.ibm.wps.engine.Servlet init EJPFD0016E: Initialization of service failed.
com.ibm.wps.ac.DomainAdministratorNotFoundException: EJPSB0107E: Exception occurred while retrieving the identity of the domain adminuser/admingroup uid=wpsadmin,cn=Users,dc=localhost,dc=com.There is no clear documentation available to enable custom security but IBM info center has decent documentation for LDAP based security. I would say follow the steps mentioned for IBM directory and then modify the necessary configuration parameters for OID. This should solve your issues. For better help open a PMR with IBM to get necessary quick help.
-
Missing Images and CSS when going to portal/server.pt can't login
Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
======= Diagnostic Run Complete =======
Startup completion percentage: 100% (50 steps out of 50 complete)
===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) externalI am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps. -
Visual Studio 2005 crashes when referencing ALI 6.5 portal server API
Visual Studio 2005 crashes when referencing ALI 6.5 portal server API
We are building new portlets in .NET 2.0 to that access the ALI 6.5 server API and are experienceing the folowing scenario:
I create a brand new project in Visual Studio (2005 with SP1 on Win2k3 R2 SP2) using the ALI Portal Project template that is provided with the application accelerator 1.1. This portlet will need to perform portal server searches so I begin by adding references to the following assemblies from C:\bea\alui\ptportal\6.5\bin\assemblies:
openconfig.dll
opencounters.dll
opencache.dll
openhttp.dll
openssl.dll
opentempfile.dll
plumtreeserver.dll
ptportalobjects.dll
I then type in something like below to start up the portal server objects.
protected void Page_Load(object sender, EventArgs e)
IOKContext context = OKConfigFactory.createInstance("C:\\bea\\alui\\settings\\", "portal");
PortalObjectsFactory.Init(context);
this.Response.Write("Portal Objects Initiallized");
Some moments later Visual Studio will crash. It has happened before I have entered any code, after I have started typing code and on builds. It seems intermittent but usually occurs within a minute of interacting with this Visual Studio project. I actually managed to build once and have had success accessing this page in Explorer to validate the portal server objects are getting initialized and referenced correctly.
I thought this was a problem with my personal development environment. So I tried this on other machines: another Win2k3 ALI 6.5 dev portal server and another server with Visual Studio 2005 that I installed the 6.5 portal on just for testing this. The exact behavior listed above is occurring on three development machines here (crashing devenv.exe when portal references are made or loading a project with portal references). Since this does not seem to be isolated to a single development machine, is there any course of action that anyone would suggest to help solve this?
thanks,
Troy RackleyIt turns out that this is only a problem with Visual Studio using the ALI templates or creating any projects using the "New... Web site" functionality of 2005. I was a ble to create a C#... ASP.net Web Application project and add the references to the idk and the local portal server APIs manually without devenv.exe crashes.
So, the work around I have found if your projects needs to access both the portal server API and the remote API is to create the project with:
New... Project... Visual C#... ASP.NET Web Application
and NOT
New... Web Site... ASP.NET Web Site (or ALI Portlet Project)
Anyone know why this is the case?
Thanks.
Troy -
How to use the CMS functionality in Sun Portal Server 7.2
Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
SrikanthHave a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps! -
Change Directory server for Portal Server 6.2
Hi there,
I have the following problem with Portal Server 6.2 configuration which hopefully someone here will be able to help me with.
Basically our current setup is the Sun Portal Server 6.2, ID server 6.1 and Directory server all sitting on one (Solaris 9) box. We now wish to separate the Portal / ID server components and the Directory Server component to separate boxes. In portal server 6.0 i think there was a pssetup tool which allowed configuration of a directory server which populated it with the necessary data for portal and ID server. The directory server we will be installing to will not necessarily be a clean install, i.e. it may already be populated with data.
Is there some way therefore to re-configure the existing directory server to allow us to point our portal / ID server at it?
Thanks in advance for any help
Laurence.This can be done. You need to import the portal/identity server's schema into your new directory server and then export your existing directory server's content and import it into the new one.
-
Say there are two portal servers A and B.
Sample Channel is present in A iPlanet portal server which I want it to be in another
B iPlanet portal server.If it is possible then how to configure?That really depends on the type of channel and what you want to share.. If it is a URL scraper or JSP channel, you should be able to define on one server and then export the definition using <b>ipsadmin</b>. This will bring it to an XML file which can then be imported on Server B using <b>ipsadmin</b>.
-
How can I create a portal server authentication user with a batch
hi,
I am trying to import users into the portal server emulating the create user procedure as plumtree. What I cannot understand at the moment is which classes are involved in the sequence of creating a user.
the problem starts from the fact that I have used a synch WS and it works but, being the table a dummy one and the users to be authenticated by the portal server, I couldn't use that synch as a definitive.
I tryed using plumtree.server.CIPTUser class with no success. could not understand how to actually create the user after setting the parameters to the object.
Is there any documentation explaining how to create the portal server emulation of create user. this could be usefull for all those cases when there is no central repository of user and passwords.
thanks
MarioThis should get you started.
IPTUser=IPTSession.GetUsers.Create(iAdminFolderID)
IPTServerContext=IPTUser.GetInterFaces("IPTServerContext")
IPTServercontext.Store
This is a high level implementation. It should get you very close.
thanks,
Craig -
Display a Calendar View in the Portale Server
Hi, we use portal server 6.2 and we want to display a view of the calendar inside a channel of the portal.
We know that portal have a calendar provider but we really didn't understand how can we use this provider to call a custom view of the calendar.
Is it possible to display a custom view of the calendar inside a page of the portal ?
ThanxProbably better to be posting this in the Calendar forum.
-
Error after deploying a war file on Portal Server 6
Hi All,
I have successfully deployed one war file on Sun Java System Portal Server 6.When I put a portlet using the channel mgmt. it gives the following exception in the AccessManager--->Debug--->Helloworld file::::
TIME | LOGGER NAME | LEVEL | THREAD ID | MESSAGE | EXCEPTION
2006/05/24 13:08:18.765 GMT+05:30 | null | LOG | service-j2ee-5 | Logger begins | -
2006/05/24 13:08:18.765 GMT+05:30 | null | LOG | service-j2ee-5 | Logger log level set to: SEVERE | -
2006/05/24 13:14:00.187 GMT+05:30 | null | SEVERE | Thread-97 | PortletAppEngineServlet.HandleError()() - Error: null | LifecycleManagerImpl.getPortlet(), can not get portlet.
x -----------------------------------------------------------------------------
X javax.portlet.PortletException: LifecycleManagerImpl.getPortlet(), can not get portlet.
X at com.sun.portal.portletappengine.impl.LifecycleManagerImpl.getPortlet(LifecycleManagerImpl.java:163)
X at com.sun.portal.portletappengine.PortletAppEngineServlet.service(PortletAppEngineServlet.java:195)
X at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
X at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
X at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:628)
X at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:539)
X at com.sun.portal.container.portlet.impl.PortletContainer.invokePAE(PortletContainer.java:409)
X at com.sun.portal.container.portlet.impl.PortletContainer.getMarkup(PortletContainer.java:180)
X at com.sun.portal.providers.window.WindowProvider.getPortletContent(WindowProvider.java:386)
X at com.sun.portal.providers.window.WindowProvider.getContentInternal(WindowProvider.java:239)
X at com.sun.portal.providers.window.WindowProvider.getContent(WindowProvider.java:204)
X at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:160)
X -----------------------------------------------------------------------------
2006/05/24 13:14:06.343 GMT+05:30 | null | SEVERE | Thread-98 | PortletAppEngineServlet.HandleError()() - Error: null | LifecycleManagerImpl.getPortlet(), can not get portlet.
x -----------------------------------------------------------------------------
X javax.portlet.PortletException: LifecycleManagerImpl.getPortlet(), can not get portlet.
X at com.sun.portal.portletappengine.impl.LifecycleManagerImpl.getPortlet(LifecycleManagerImpl.java:163)
X at com.sun.portal.portletappengine.PortletAppEngineServlet.service(PortletAppEngineServlet.java:195)
X at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
X at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
X at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:628)
X at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:539)
X at com.sun.portal.container.portlet.impl.PortletContainer.invokePAE(PortletContainer.java:409)
X at com.sun.portal.container.portlet.impl.PortletContainer.getMarkup(PortletContainer.java:180)
X at com.sun.portal.providers.window.WindowProvider.getPortletContent(WindowProvider.java:386)
X at com.sun.portal.providers.window.WindowProvider.getContentInternal(WindowProvider.java:239)
X at com.sun.portal.providers.window.WindowProvider.getContent(WindowProvider.java:204)
X at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:160)
X -----------------------------------------------------------------------------
2006/05/24 13:14:07.984 GMT+05:30 | null | SEVERE | service-j2ee-2 | PortletAppEngineServlet.HandleError()() - Error: null | LifecycleManagerImpl.getPortlet(), can not get portlet.
x -----------------------------------------------------------------------------
X javax.portlet.PortletException: LifecycleManagerImpl.getPortlet(), can not get portlet.
X at com.sun.portal.portletappengine.impl.LifecycleManagerImpl.getPortlet(LifecycleManagerImpl.java:163)
X at com.sun.portal.portletappengine.PortletAppEngineServlet.service(PortletAppEngineServlet.java:195)
X at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
X at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
X at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:628)
X at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:539)
X at com.sun.portal.container.portlet.impl.PortletContainer.invokePAE(PortletContainer.java:409)
X at com.sun.portal.container.portlet.impl.PortletContainer.getMarkup(PortletContainer.java:180)
X at com.sun.portal.providers.window.WindowProvider.getPortletContent(WindowProvider.java:386)
X at com.sun.portal.providers.window.WindowProvider.getContentInternal(WindowProvider.java:239)
X at com.sun.portal.providers.window.WindowProvider.getEdit(WindowProvider.java:211)
X at com.sun.portal.desktop.taglib.provider.GetEditTag.doStartTag(GetEditTag.java:23)
X at jspsC0003a._Sun._PortalServer._config._desktop._sampleportal_en_US._JSPEditContainer._html._edit_jsp._jspService(_edit_jsp.java:218)
X at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
X at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
X at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
X at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:896)
X at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:810)
X at com.sun.portal.providers.jsp.JSPProvider.getEdit(JSPProvider.java:630)
X at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:590)
X at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:281)
X at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
X at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
X at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
X at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
X at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
X at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
X at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
X at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
X at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
X at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
X -----------------------------------------------------------------------------
Looking at this exception if anyone has got the idea about this problem then please let me know the solution for the same.All suggestions are welcome.
Thanx and Regards,
Chirag.Hi jmendelak,
In the warfile i have jsp,servlets,java classes.
In my working directory i have jsp and html files and in web-inf folder i have a folder by name classes in which i have the servlets and java classes.
I made the war file and when i tried to deploy i was getting this error.
I had previously deployed this war file on weblogic6.1 it was working fine.
I have upgraded my operating sytem to Windows2000 professional from WinNT 4.0.I reinstalled the weblogic again and had set up the environment variables.
After going through the error could you find out the reason?Is it because some seeting is missing?
Raji -
Error on running the .portal on the weblogic portal server 10.3.2 using jsf
Hi,
This are the below file that i have included in the project
login.jspx
<jsp:root version="1.2" xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:ice="http://www.icesoft.com/icefaces/component">
<jsp:directive.page contentType="text/html;charset=utf-8" />
<f:view>
<ice:outputDeclaration doctypeRoot="HTML"
doctypePublic="-//W3C//DTD HTML 4.01 Transitional//EN"
doctypeSystem="http://www.w3.org/TR/html4/loose.dtd" />
<html>
<head>
<title>ICEfaces,Login Portlet</title>
<link rel="stylesheet" type="text/css"
href="./xmlhttp/css/rime/rime.css" />
</head>
<body>
<ice:portlet>
<ice:outputText value="Welcome to ICEfaces." />
<ice:form>
<ice:outputText value="Username" />
<ice:inputText id="name_t" value="#{Login.userName}"></ice:inputText>
<ice:outputText value="Password"/>
<ice:inputText id="password_t" value="#{Login.password}"></ice:inputText>
<ice:commandButton action="#{Login.checkUserPass}" value="OK"></ice:commandButton>
</ice:form>
</ice:portlet>
</body>
</html>
</f:view>
</jsp:root>
faces-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<faces-config
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
version="1.2">
<application>
<view-handler>
com.icesoft.faces.facelets.D2DFaceletViewHandler
</view-handler>
<locale-config>
<supported-locale>de</supported-locale>
<supported-locale>en</supported-locale>
</locale-config>
</application>
<managed-bean>
<managed-bean-name>Login</managed-bean-name>
<managed-bean-class>com.pack.login.Login</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>userName</property-name>
<property-class>java.lang.String</property-class>
<value></value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<property-class>java.lang.String</property-class>
<value></value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/login.jspx</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/success.iface</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>failure</from-outcome>
<to-view-id>/failure.iface</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
portlet.xml
<?xml version="1.0" encoding="UTF-8"?>
<faces-config
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
version="1.2">
<application>
<view-handler>
com.icesoft.faces.facelets.D2DFaceletViewHandler
</view-handler>
<locale-config>
<supported-locale>de</supported-locale>
<supported-locale>en</supported-locale>
</locale-config>
</application>
<managed-bean>
<managed-bean-name>Login</managed-bean-name>
<managed-bean-class>com.pack.login.Login</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>userName</property-name>
<property-class>java.lang.String</property-class>
<value></value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<property-class>java.lang.String</property-class>
<value></value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/login.jspx</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/success.iface</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>failure</from-outcome>
<to-view-id>/failure.iface</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Login.java
package com.pack.login;
import javax.faces.application.FacesMessage;
import javax.faces.context.FacesContext;
public class Login {
public String getUserName() {
return userName;
public void setUserName(String userName) {
this.userName = userName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
private String userName;
private String password;
public String checkUserPass(){
FacesContext facesContext = FacesContext.getCurrentInstance();
if("icefaces".equals(getUserName()) && "icefaces".equals(getPassword())) {
return"success";
FacesMessage facesMessage = new FacesMessage(
"You have entered an invalid user name and/or password");
facesContext.addMessage("Login", facesMessage);
return "failure";
What are the classes or interfaces that we need to use to render the content and to the process the action in jsf-portlet + icefaces libraris + weblogic portal server 10.3.2
I have created the .portal file and i have included the instance of the .portlet file in the portal page. When i run .portal file on the server it will throw the below exception.
<Warning> <netuix> <BEA-423319> <A default JSP response character encoding was not found for webapp [Portal]. Defaulting to [UTF-8]. You can override this default response character encoding for all portals in netuix-config.xml or for each portal or desktop in each portal or desktop definition.>
12, 2010 9:57:05 AM com.sun.faces.lifecycle.Phase doPhase
SEVERE: JSF1054: (Phase ID: RENDER_RESPONSE 6, View ID: /login.jspx) Exception thrown during phase execution: javax.faces.event.PhaseEvent[source=com.sun.faces.lifecycle.LifecycleImpl@18fddac]
<Error> <netuix> <BEA-423405> <An exception [java.lang.NullPointerException] was thrown while rendering the content at [login.jspx].
javax.faces.FacesException: java.lang.NullPointerException
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:128)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
at com.bea.portlet.adapter.faces.FacesContentStubImpl.render(FacesContentStubImpl.java:354)
at com.bea.netuix.servlets.controls.content.FacesContent.beginRender(FacesContent.java:424)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at com.sun.faces.renderkit.RenderKitImpl.createResponseWriter(RenderKitImpl.java:188)
at com.icesoft.faces.renderkit.D2DRenderKit.createResponseWriter(D2DRenderKit.java:87)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:194)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.portlet.faces.application.PortletViewHandlerImpl.renderView(PortletViewHandlerImpl.java:257)
Truncated. see log file for complete stacktrace
>
<Error> <netuix> <BEA-423137> <There was an error loading the requested URI /login.jspx.>
Login Error opening /login.jspx.
The source of this error is:
javax.faces.FacesException: java.lang.NullPointerException
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:128)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
at com.bea.portlet.adapter.faces.FacesContentStubImpl.render(FacesContentStubImpl.java:354)
at com.bea.netuix.servlets.controls.content.FacesContent.beginRender(FacesContent.java:424)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:488)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:152)
at com.bea.netuix.servlets.jsp.taglib.skeleton.Child.doTag(Child.java:63)
at jsp_servlet._framework._skeletons._bighorn.__flowlayout._jspService(__flowlayout.java:175)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:148)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:168)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:465)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:291)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:231)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:216)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:275)
at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:719)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at com.sun.faces.renderkit.RenderKitImpl.createResponseWriter(RenderKitImpl.java:188)
at com.icesoft.faces.renderkit.D2DRenderKit.createResponseWriter(D2DRenderKit.java:87)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:194)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.portlet.faces.application.PortletViewHandlerImpl.renderView(PortletViewHandlerImpl.java:257)
at com.bea.portlet.adapter.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:77)
at com.icesoft.faces.application.D2DViewHandler.renderView(D2DViewHandler.java:151)
at com.icesoft.faces.application.D2DViewHandler.renderView(D2DViewHandler.java:151)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:109)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:100)
... 71 more
I have created the .portal file and i have included the instance of the .portlet file in the portal page. When i run .portal file on the server it will throw the below exception.
<Warning> <netuix> <BEA-423319> <A default JSP response character encoding was not found for webapp [Portal]. Defaulting to [UTF-8]. You can override this default response character encoding for all portals in netuix-config.xml or for each portal or desktop in each portal or desktop definition.>
12, 2010 9:57:05 AM com.sun.faces.lifecycle.Phase doPhase
SEVERE: JSF1054: (Phase ID: RENDER_RESPONSE 6, View ID: /login.jspx) Exception thrown during phase execution: javax.faces.event.PhaseEvent[source=com.sun.faces.lifecycle.LifecycleImpl@18fddac]
<Error> <netuix> <BEA-423405> <An exception [java.lang.NullPointerException] was thrown while rendering the content at [login.jspx].
javax.faces.FacesException: java.lang.NullPointerException
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:128)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
at com.bea.portlet.adapter.faces.FacesContentStubImpl.render(FacesContentStubImpl.java:354)
at com.bea.netuix.servlets.controls.content.FacesContent.beginRender(FacesContent.java:424)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at com.sun.faces.renderkit.RenderKitImpl.createResponseWriter(RenderKitImpl.java:188)
at com.icesoft.faces.renderkit.D2DRenderKit.createResponseWriter(D2DRenderKit.java:87)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:194)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.portlet.faces.application.PortletViewHandlerImpl.renderView(PortletViewHandlerImpl.java:257)
Truncated. see log file for complete stacktrace
>
<Error> <netuix> <BEA-423137> <There was an error loading the requested URI /login.jspx.>
Login Error opening /login.jspx.
The source of this error is:
javax.faces.FacesException: java.lang.NullPointerException
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:128)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
at com.bea.portlet.adapter.faces.FacesContentStubImpl.render(FacesContentStubImpl.java:354)
at com.bea.netuix.servlets.controls.content.FacesContent.beginRender(FacesContent.java:424)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:488)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:152)
at com.bea.netuix.servlets.jsp.taglib.skeleton.Child.doTag(Child.java:63)
at jsp_servlet._framework._skeletons._bighorn.__flowlayout._jspService(__flowlayout.java:175)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:502)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:148)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:168)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:465)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:291)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:231)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:216)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:275)
at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:719)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at com.sun.faces.renderkit.RenderKitImpl.createResponseWriter(RenderKitImpl.java:188)
at com.icesoft.faces.renderkit.D2DRenderKit.createResponseWriter(D2DRenderKit.java:87)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:194)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.portlet.faces.application.PortletViewHandlerImpl.renderView(PortletViewHandlerImpl.java:257)
at com.bea.portlet.adapter.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:77)
at com.icesoft.faces.application.D2DViewHandler.renderView(D2DViewHandler.java:151)
at com.icesoft.faces.application.D2DViewHandler.renderView(D2DViewHandler.java:151)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:109)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:100)
... 71 more
Thanks in advance.First you install a JDK6 version after which you can install your WebLogic and Forms, Reports...
A step-by-step example is presented here: http://middlewaremagic.com/weblogic/?p=7265
Look in the 'Install WebLogic' section. Note that you probably do not have to create a separate user,
also you can use HotSpot instead of JRockit. -
Deploying a war file to the portal server
Hi,
I have downloaded a portlet (portletsamples.war) from the following URL,
http://developers.sun.com/prodtech/portalserver/reference/techart/jsr168/
Could I know how to deploy this war file to SUN ONE Portal server 6.0?
--Muthui used the following command
/opt/SUNWps/bin/pdeploy deploy -u "amadmin" -w password -d "dc=cmarks,dc=com" -p password /opt/madiha/me.war
It gives the error
errorStoreDP (User does not have sufficient access.)
1)does it matter if the portal server is started or not when we deploy?
2)i am logged in to the machine as the super user "root" but yet it is throwing this error
the error that i get in the pdeply.debug file is
ERROR: Exception:
com.sun.portal.desktop.context.ContextError: DSAMEConnection.setTemplateAttribute(): , dn=dc=cmarks,dc=com, serviceName= SunPortalDesktopService, sunPortalDesktopDpDocument=
com.iplanet.am.sdk.AMException: User does not have sufficient access.
at com.sun.portal.desktop.context.DSAMEConnection.setTemplateAttribute(DSAMEConnection.java:1050)
at com.sun.portal.desktop.context.DSAMEConnection.setAttributeByDN(DSAMEConnection.java:518)
at com.sun.portal.desktop.context.DSAMEAdminDPContext.storeDPDocumentByDN(DSAMEAdminDPContext.java:210)
at com.sun.portal.portlet.cli.PDDPUpdater.storeDPDocument(PDDPUpdater.java:232)
at com.sun.portal.portlet.cli.PDDPUpdater.addProviders(PDDPUpdater.java:98)
at com.sun.portal.portlet.cli.PDDeploy.process(PDDeploy.java:229)
at com.sun.portal.portlet.cli.PortletDeployerCommand.runCommand(PortletDeployerCommand.java:208)
at com.sun.portal.portlet.cli.PortletDeployerMain.main(PortletDeployerMain.java:54)
com.iplanet.am.sdk.AMException: User does not have sufficient access.
at com.iplanet.am.sdk.AMDirectoryManager.setAttributes(AMDirectoryManager.java:2136)
at com.iplanet.am.sdk.AMCacheManager.setAttributes(AMCacheManager.java:867)
at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1573)
at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1514)
at com.sun.portal.desktop.context.DSAMEConnection.setTemplateAttribute(DSAMEConnection.java:992)
at com.sun.portal.desktop.context.DSAMEConnection.setAttributeByDN(DSAMEConnection.java:518)
at com.sun.portal.desktop.context.DSAMEAdminDPContext.storeDPDocumentByDN(DSAMEAdminDPContext.java:210)
at com.sun.portal.portlet.cli.PDDPUpdater.storeDPDocument(PDDPUpdater.java:232)
at com.sun.portal.portlet.cli.PDDPUpdater.addProviders(PDDPUpdater.java:98)
at com.sun.portal.portlet.cli.PDDeploy.process(PDDeploy.java:229)
at com.sun.portal.portlet.cli.PortletDeployerCommand.runCommand(PortletDeployerCommand.java:208)
at com.sun.portal.portlet.cli.PortletDeployerMain.main(PortletDeployerMain.java:54)
can somebody plz help? -
Problem with importing par file in portal server 6.2
Hi everyone,
I got the following error when trying to import IFRAME provider into portal server 6.2.
Operation failed.
ERROR: provider element has no version attribute
Below is the command I used. I run it as a file - I supply the password at the command line.
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier,dc=com" password $1 IFRAMEProvider.par dc=accesscollier,dc=com provider=IFRAMEProvider.
This used to work in Portal Server 6.0. I looked through the Portal Server 6.2 Desktop Customization Guide and the Developer guide for portal 6.2 but did not find any reference to version number.
Thanks.
Klara Hribkova
IHi Ulf,
here is the command + options. It is in a file, I supply the password on the command line. This used to work fine with PortalServer 6.0.
!/bin/ksh
echo "----------------------------------"
echo "USE: import_providers.sh password "
echo "----------------------------------"
#echo "Importing IFRAMEProvider ..."
#/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscolier,dc=com" password $1 IFRAMEProvider.par
dc=accesscollier,dc=com provider=IFRAMEProvider
echo "Importing IFRAMECalendarProvider ..."
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier,dc=com" password $1 IFRAMECalendarProvi
der.par dc=accesscollier,dc=com provider=IFRAMECalenderProvider
echo "Importing IFRAMEMailProvider ..."
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier, dc=com" password $1 IFRAMEMailProvider
.par dc=accesscollier,dc=com provider=IFRAMEMailProvider
echo "Importing JSPWebAppProvider ..."
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier, dc=com" password $1 JSPWebAppProvider.
par dc=accesscollier,dc=com provider=JSPWebAppProvider
These are the errors I get:
# ./import_providers1.sh solurute
./import_providers1.sh: !/bin/ksh: not found
USE: import_providers.sh password
Importing IFRAMECalendarProvider ...
AUTHENTICATING
uid=amAdmin,ou=People,dc=accesscollier,dc=com
solurute
AUTHENTICATED - Setting DN - dc=accesscollier,dc=com.
Initializing for operation - dpnode=dc%3Daccesscollier%2Cdc%3Dcom,provider=IFRAMECalenderProvider.
Operation failed.
ERROR: provider element has no version attribute.
Importing IFRAMEMailProvider ...
AUTHENTICATING
uid=amAdmin,ou=People,dc=accesscollier, dc=com
solurute
AUTHENTICATED - Setting DN - dc=accesscollier,dc=com.
Initializing for operation - dpnode=dc%3Daccesscollier%2Cdc%3Dcom,provider=IFRAMEMailProvider.
Operation failed.
ERROR: provider element has no version attribute.
Importing JSPWebAppProvider ...
AUTHENTICATING
uid=amAdmin,ou=People,dc=accesscollier, dc=com
solurute
AUTHENTICATED - Setting DN - dc=accesscollier,dc=com.
Initializing for operation - dpnode=dc%3Daccesscollier%2Cdc%3Dcom,provider=JSPWebAppProvider.
Operation failed.
ERROR: provider element has no version attribute.
This is the build_par.xml file:
<?xml version="1.0"?>
<project name="Provider" default="all" basedir=".">
<property name="par.dir" value="./pars"/>
<property name="iframe.dir" value="iframeprovider"/>
<property name="iframecalendar.dir" value="iframecalendarprovider"/>
<property name="iframemail.dir" value="iframemailprovider"/>
<target name="iframe">
<jar jarfile="${par.dir}/IFRAMEProvider.par"
basedir="${iframe.dir}"
includes="**/*">
<manifest>
<attribute name="PS-Version" value="1"/>
<attribute name="PS-DefaultEntry" value="IFRAMEProvider"/>
<attribute name="PS-PBFileRoot" value="pbfiles"/>
<attribute name="PS-StaticRoot" value="static"/>
<attribute name="PS-DPRoot" value="dp"/>
<section name="dp/IFRAMEProvider.xml">
<attribute name="PS-EntryName" value="IFRAMEProvider"/>
<attribute name="PS-Include" value="pbfiles/providerClassBaseDir/k20portal.properties(1),com/hangingvalley/sunportal/util/K20PortalProperties.class(1),com/hangingvalley/sunportal/util/OrgProperties.class(1),pbfiles/templateBaseDir/default/IFRAMEProvider/iframecontent.jsp(1),pbfiles/templateBaseDir/default/IFRAMEProvider/iframedoedit.jsp(1),pbfiles/templateBaseDir/default/IFRAMEProvider/iframeedit.jsp(1)"/>
</section>
</manifest>
</jar>
</target>
<target name="iframecalendar">
<jar jarfile="${par.dir}/IFRAMECalendarProvider.par"
basedir="${iframecalendar.dir}"
includes="**/*">
<manifest>
<attribute name="PS-Version" value="1"/>
<attribute name="PS-DefaultEntry" value="IFRAMECalendarProvider"/>
<attribute name="PS-PBFileRoot" value="pbfiles"/>
<attribute name="PS-StaticRoot" value="static"/>
<attribute name="PS-DPRoot" value="dp"/>
<section name="dp/IFRAMECalendarProvider.xml">
<attribute name="PS-EntryName" value="IFRAMECalendarProvider"/>
<attribute name="PS-Include" value="pbfiles/templateBaseDir/default/IFRAMECalendarProvider/iframecontent.jsp(1),pbfiles/templateBaseDir/default/IFRAMECalendarProvider/iframedoedit.jsp(1),pbfiles/templateBaseDir/default/IFRAMECalendarProvider/iframeedit.jsp(1)"/>
</section>
</manifest>
</jar>
</target>
<target name="iframemail">
<jar jarfile="${par.dir}/IFRAMEMailProvider.par"
basedir="${iframemail.dir}"
includes="**/*">
<manifest>
<attribute name="PS-Version" value="1"/>
<attribute name="PS-DefaultEntry" value="IFRAMEMailProvider"/>
<attribute name="PS-PBFileRoot" value="pbfiles"/>
<attribute name="PS-StaticRoot" value="static"/>
<attribute name="PS-DPRoot" value="dp"/>
<section name="dp/IFRAMEMailProvider.xml">
<attribute name="PS-EntryName" value="IFRAMEMailProvider"/>
<attribute name="PS-Include" value="pbfiles/templateBaseDir/default/IFRAMEMailProvider/iframecontent.jsp(1),pbfiles/templateBaseDir/default/IFRAMEMailProvider/iframedoedit.jsp(1),pbfiles/templateBaseDir/default/IFRAMEMailProvider/iframeedit.jsp(1)"/>
</section>
</manifest>
</jar>
</target>
<target name="all" depends="iframe,iframecalendar,iframemail"/>
</project>
Thank you very much for your assistance and for your time.
Klara -
Sun Java System Portal Server 6.0 FAQs
Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>¶m2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes. -
IPlanet Enterprise Web Server hosting a portal server
Has anyone tried to port the Plumtree portal server component to iPlanet Enterprise Web Server (aka SunONE Web Server, v6.0 or later)? Plumtree doesn't support this, but I am trying to merge a custom SSO authenticator to the Plumtree portal (v5.0.1).
I have this working great in security mode 0 (with SSL turned off), but I am having a difficult time getting past one last issue in security mode 2 (full SSL mode). I can get the portal server to run fine in mode 2 through Tomcat on the same machine, using the same certificate and JRE. I can also get iPlanet to run other servlet applications fine with SSL turned on. However, there appears to be either: (1) an incompatibility between iPlanet's NSServlet plug-in that handles servlets and the Plumtree framework classes that set up replies via SSL, or (2) a configuration error in my setup somewhere. I'm hoping that (2) is the real culprit, but I've tried just about everything I can think of, and haven't been able to resolve this problem.
The server starts up fine and I can load non-portal content without a problem. But when I log in, the portal's main community page that should be returned is not being returned to the client. PTSpy doesn't indicate any problems, so I know the content is being built by the portal correctly, but the built page is never being sent back to the requesting client.
Here is the error that gets logged to iPlanet's error log:
[29/Dec/2003:15:05:53] failure ( 2772): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.NoClassDefFoundError: javax/net/ssl/SSLSocket
at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:793)
at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:702)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:583)
at java.net.URL.openStream(URL.java:960)
at org.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultReaderFactory.java:149)
at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:493)
at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:314)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1097)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:195)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at com.plumtree.openfoundation.xml.dom.XPBuilder.LoadDocumentFromURI(XPBuilder.java:203)
at com.plumtree.xpshared.jsutil.JSRegistry.LookupJSComponentVersions(JSRegistry.java:243)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponentVersions(JSRegistry.java:184)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:465)
at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:444)
at com.plumtree.uiinfrastructure.statichelpers.ConfigHelper.GetCommonJSIncludes(ConfigHelper.java:1330)
at com.plumtree.uiinfrastructure.form.AFormAS.DisplayCommonJavaScript(AFormAS.java:59)
at com.plumtree.portalpages.common.uiparts.PlumtreeAS.DisplayCommonJavaScript(PlumtreeAS.java:88)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayHead(PlumtreeDP.java:599)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:112)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.ProcessDisplayPageOrRedirect(Interpreter.java:816)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.HandleRequest(Interpreter.java:1589)
at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.DoService(Interpreter.java:448)
at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:141)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
It looks like a Java classpath issue, but I've verified (even in the same log file with java debugging turned on) that the SSLSocket class is getting loaded. I've even tried moving the specification of the jar file containing this class (jsse.jar, part of the JRE) to the beginning and end of my classpath setting.
I'm using the same JRE that is bundled with the Tomcat release supplied with my Plumtree 5.0.1 installation (1.4.1_02).
I've posted a similar message on a couple other forums (Java and iPlanet-related) and haven't found an answer yet. Does anyone have any ideas?
JohnIn case anyone else experiences this, I have apparently stumbled upon an issue with iPlanet's handling a specified JRE/JDK instead of the supplied JDK in iPlanet (SunONE) Web Server v6.0, SP5, though I found a way around it to resolve my problem.
I had been specifying a different JRE to run with through iPlanet's administrative server manager. However, even though I was specifying to load all the JRE's jar files in my classpath setting, iPlanet was only loading the rt.jar file for my specified JRE. With verbose logging turned on, the error log was indicating that the other classpath specified jar files were being loaded, but apparently they were not being used. The JDK that was released with iPlanet appears to be being used for all other JRE classes outside of those defined in rt.jar. Since the JDK supplied with the iPlanet release didn't contain jsse.jar, which contains SSL support, it was not being loaded and was causing the problem I was seeing.
Instead of specifying the JRE of a different JDK that I was using, I changed the global setting in the administrative server manager to override the entire JDK. This has resolved my problem.
So if you specify a JRE to override the iPlanet supplied JDK/JRE, it appears that only the rt.jar file of the specified JRE will be loaded, and the jar files associated with the iPlanet-supplied JRE will be used for all other classes. Specification of a complete JDK to override the supplied one will resolve this, and the portal server appears to work fine now in any security mode setting when hosted on iPlanet Web Server (SunONE), even though Plumtree doesn't support that as a host server application.
Maybe you are looking for
-
LOTS of Mac & Macbook Questions
Hey all, My parents have just told me that as a birthday/xmas gift they are going to help me buy a laptop I wanted to know a couple things: My dad got a macbook free (SO lucky) through his work but it is the most basic 1.83Ghz with 512mb ram Core Duo
-
Centro wired headsets wont work i have read the other posts on this
I've been reading posts on this topic. will try to find some wd40 or a paperclip when I get out of this airport! but I dont know if this is my problem. because when my headset is plugged in you hear no sound coming from the "earpiece" but the minu
-
One of our clients is having an error that we can't reproduce and I'm wondering if any of you have seen this issue before. We have a menu bar on their site ( see it here) that has the stage color set to a navy in Flash 8. Only on one person's browser
-
Hey, Guys! I bought my Iphone 4S in London less than a month. When i arrived in Brazil, it just couldn`t make any calls. I bought one UNbloked, but it seems it was blocked. When i pluged it in my macbook pro to update and restore it, at the end of th
-
LR 2 - how to undo changes after unselecting picture?
Hi, I do a bunch of edits on picture A. Then, I go to picture B and do some edits. Then, when I go back to Picture A and decide to change it, I don't see any option to undo those edits any more. I thought it would be in the "History" section in th