Position Vs Time for LVDT

Hello I'm very new to Labview (Three weeks) Can anyone give me some sample on how to measure position vs time for LVDT? This is very simple using an Oscilloscope by position X1 and X2 cursors to measure delta time but I am not sure how to do this with the labview graphs or charts. I want measure time from trigger to fist sign of movement, total stroke time and snubbing time (Of actuator). I have attached an image of what I want to measure. Are there specific VIs to look for these times. Even by manually placing cursors on desired position in labview all I get is the time for each cursor but not the delta time between cursors. Any help will be greatly appreciated
Juan
JCollado
Solved!
Go to Solution.
Attachments:
measuringStrokeTimejpg.jpg ‏77 KB

Thanks for your help.
I have attached the VI I'm working on. It is working manually as far as the graph time measurement. No database connection and other controls not in use yet.
I am also thinking that I might be able to do this with the shift register checking if current value for Y is higher then last. If higher I should take trigger time to this time and so on.
It will take me a bit because I'm so new to labview and new to Instrumentation type programming.
Thanks
JCollado
Attachments:
highFlowDecreaseSimulationeEventcovi.vi ‏25 KB

Similar Messages

"unexpected additional time for review"...Any Ideas what this means?

I received the following from apple, anyone know what it means, Have not heard from them since... I have 3 apps for sale and have not seen this before... are they just swamped? Or is this something specific to my app? Thoughts?
thanks for reply
michael
{quote}
Hello,
Your application, MY APP NAME, is requiring unexpected additional time for review. We apologize for the delay, and will update you with further status as soon as we are able.
Thank you for your patience.
Regards,
iPhone Developer Program
{quote}

It usually means there's something questionable about your app and Apple doesn't have a formal policy yet of how to handle it. From what I've read with other people in a similar situation, it might be because Apple suspects your app is doing something in violation of the SDK rules, but it's a grey area.
I read one person say they received such an email when they had an app that simulated smoking (kinda like iBeer, but for cigarettes). Apple's legal team was probably mulling it over for awhile to figure out whether it deserved outright rejection or might be allowed in the store.
Sometimes, once your app is in this status, it will be there for MONTHS. Yes, months. Best advice is once you receive such an email move on to a new app idea. Your app might eventually be accepted, but no telling how long it will take and Apple is usually silent in regards to further email queries asking for clarification.
I have an app in this state right now. The questionable part of my app is that under certain circumstances the app simulates a cracked screen. The app was initially rejected and when I pointed out that another app (Sonic Boom) already does this and is approved in the store, I received this status update that my app is now requiring additional time for review.
Hopefully it really means Apple is reconsidering their position and it's not a way to just put my app on hold indefinitely.
Yes, it's frustrating, and yes, it makes me rethink the whole idea of investing serious time in developing apps for the iPhone.

A previous and unrelated text always appears when I need to send a new text. This prevents forwarding texts also, which I need to do all the time for my business. How can I fix? Please help!

A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?

Hi,
This sounds like it is about Window positions.
iChat has Default places for Incoming Invites.
Video is always top Center of your Screen
Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
Secondary invites are sort of Stacked like when you open multiple files from the same App.
Your outgoing Windows are "Remembered" as to where the last one was when you used it.
This can be an issue if you use your Mac with a second display and turn Off Mirroring.
You windows can get "left" on the other screen.
Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
10:42 PM Tuesday; April 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Capturing the time for rendering the JSFscreen.

I have a JSF application running on WAS6.1. We have some performance issues.
The JSF rendering is taking long time to render the page. All the database operation ie querying the database and leaving the prerender method is happening so fast.
So how can we capture the time for the JSF components to render the page. Is there any way to do that?

i tried to implement the phase listener.But im getting an error message in the JSP saying
JSPG0046E: Unable to locate tagfile for tag phaseListener
My action getting triggered on click of a tab. So in my JSP page I mentioned as
<ui:tab action="#{reportsView.kpiRanking_action}" binding="#{reportsView.kpiRankingStore}"
id false*/;
openPreloadWindow(); 
document.getElementById("form1:periodTypeDropDown")[2].selected = true;
savePeriodType();"
style="height: 25px; text-align: center; vertical-align: middle; width: 91px;cursor: pointer;" text="Store KPI Ranking">
<f:phaseListener binding="#{reportsView.phaseListenerImpl}" type="com.capricorn.sckpi.PhaseListenerImpl"/>
<ui:panelLayout binding="#{reportsView.layoutPanel30}" id="layoutPanel30" style="height: 335px; width: 100%; overflow-y: auto;">
<ui:table augmentTitle="false" binding="#{reportsView.storeWithinDistrictTableStore}"
id="storeWithinDistrictTableStore"
style="height: 100%; left: 0px; top: 0px; position: relative; width: 100%" title="KPI Ranking">
<ui:tableRowGroup binding="#{reportsView.storeWithinDistrictRowGroupStore}"
id="storeWithinDistrictRowGroupStore" sourceData="#{reportsView.defaultTableDataProvider}" sourceVar="currentRow"/>
</ui:table>
<ui:table augmentTitle="false" binding="#{reportsView.storeWithinDistrictTableStore1}"
id="storeWithinDistrictTableStore1"
style="height: 100%; left: 0px; top: 0px; position: relative; width: 100%" title="YTD Ranking">
<ui:tableRowGroup binding="#{reportsView.storeWithinDistrictRowGroupStore1}"
id="storeWithinDistrictRowGroupStore1" sourceData="#{reportsView.defaultTableDataProvider}" sourceVar="currentRow"/>
</ui:table>
</ui:panelLayout>
</ui:tab>
My header for JSP is
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
Please help.

Positive lead time

Hello,
in PP customizing, Shop floor control - operations - scheduling - define scheduling parameters for production order:
In adjust dates, i have: do not adjust basic dates, dep.reqmts to order start.
I need a positive lead time too. SAP don't permit it. WHYYY???
In our plant we need to increase several days the requirements date of material to receive the material several days after the beginning of the operation.
How could i make this????
THANK YOU ALL.

Hi,
Generally the reqmts dates of the components is initially set to the order start date of the planned order to which the components are assigned.
--- if a component is reqd earlier or later we can shift the reqmts date using the lead time off set / operation related lead time off set in the Bom Item detail screen.
Lead time off set:
if we make an entry in this field the reqmts date which is initially set order start date is moved.
Only -ve values are allowed.
ie components must be available before the scheduled start date.
Lead time offset for an Operation:
if we make an entry in this field the reqmts date which is initially set to order start date of the operation to which the components are assigned is moved.
+ve value -
components can be available after the start date of the operation.
-ve value -
components must be available before the start date of the operation.
You need to maintain these fields in BOM Item details screen Basic data.
Regards,
nandha

Positive & Negative Time Management

Dear Seniors,
What is positive & negative time management? Which time management status do we use for these?
What r time pairs & where can these be configured?
Thx & Regards
WARNED-> No more basic questions please.

Hi,
Positive time is plays the total role of workflow. All the processes related to time are automatically gets executed in the background. E.g., in our case it is done only partially to validate the attendance as per punches and other documents with shift timing and generate absence automatically in case of any discrepancy.
.Negative Time (-ve Time) ? Where the all time related activities like validation of the attendance, posting of absence for wage deduction etc are done manually. It has less level of integration among the different components of time management.
Positive Time Management we have two types of recordings:
1. With Clock times - Complete time recording is captured
2. With out Clock times - Only Number of hourse worked is captured
Negative time Management:
1. No clock times and assumed employee is working unless and until his or her absences are entered.
Regards,
Tarun

It's time for the TechNet Wiki VB "Great Guru Love-in"! You too can get some loving!

February at TechNet Wiki usually involves a lot of love...
We love to read.
We love to learn.
We love our gurus, for they love to give.
We love to make friends and promote great content.
We love to meet the community, and get closer to you.
We love to interview our winners, and bestow much love and honor upon them.
We love to tell the world of your achievements, and we promote those most active to inner circles!
All you have to do is add an article to TechNet Wiki from your own specialist field. Something that fits into one of the categories listed on the submissions page. Copy in your own blog posts, a forum solution, a white paper, or just something
you had to solve for your own day's work today.
Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!
This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!
HOW TO WIN
1) Please copy over your Microsoft technical solutions and revelations to
TechNet Wiki.
2) Add a link to it on
THIS WIKI COMPETITION PAGE (so we know you've contributed)
3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.
If you win, we will sing your praises in blogs and forums, similar to the
weekly contributor awards. Once "on our radar" and making your mark, you will probably be
interviewed for your greatness, and maybe eventually even invited into other inner TechNet/MSDN circles!
Winning this award in your favoured technology will help us learn the active members in each community.
Feel free to ask any questions below.
More about TechNet Guru Awards
Thanks in advance!
Pete Laker
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!

Does this count? :)
Imports System.Drawing.Drawing2D
'valentines day animation
Public Class Form8
Private WithEvents timer1 As New Windows.Forms.Timer With {.Interval = 200}
Private Arrow1 As New GraphicsPath
Private count, countmax As Integer
Private CupidGif As Bitmap = Image.FromFile("c:\bitmaps\valentine\cupid3.gif")
Private HeartGif As Bitmap = Image.FromFile("c:\bitmaps\valentine\heart3.gif")
Private Sub Form8_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.DoubleBuffered = True
countmax = 6
'make the arrow
Dim thePolygon() As PointF = {New PointF(0, 0), New PointF(3, 0), New PointF(4, 1), _
New PointF(9, 1), New PointF(9, -1), New PointF(12, 2), _
New PointF(9, 5), New PointF(9, 3), New PointF(4, 3), _
New PointF(3, 4), New PointF(0, 4), New PointF(2, 2), _
New PointF(0, 0)}
Arrow1.AddLines(thePolygon)
'setup gifs
ImageAnimator.Animate(HeartGif, New EventHandler(AddressOf Me.OnFrameChanged))
ImageAnimator.Animate(CupidGif, New EventHandler(AddressOf Me.OnFrameChanged))
End Sub
Private Sub timer1_Tick(sender As Object, e As EventArgs) Handles timer1.Tick
count += 1
If count > 30 Then count = 1
'start/stop gifs
Select Case count
Case Is < 5
ImageAnimator.Animate(HeartGif, AddressOf Me.OnFrameChanged)
ImageAnimator.Animate(CupidGif, AddressOf Me.OnFrameChanged)
Case Is < 12
ImageAnimator.UpdateFrames(CupidGif)
Case Is < 17
ImageAnimator.StopAnimate(CupidGif, AddressOf Me.OnFrameChanged)
'ImageAnimator.Animate(HeartGif, AddressOf Me.OnFrameChanged)
Case Is < 28
ImageAnimator.UpdateFrames(HeartGif)
Case Else
ImageAnimator.StopAnimate(HeartGif, AddressOf Me.OnFrameChanged)
End Select
Me.Invalidate()
End Sub
Private Sub OnFrameChanged(ByVal o As Object, ByVal e As EventArgs)
Me.Invalidate()
End Sub
Private Sub Form8_Paint(sender As Object, e As PaintEventArgs) Handles Me.Paint
Dim Scale As Single = 100
Dim ScaleRatio As Single = Me.ClientRectangle.Width / Scale
Dim ax, ay, w, x, y As Single
With e.Graphics
.Clear(Color.Black)
.ResetTransform()
'draw cupid
w = 0.2 * Scale * ScaleRatio
x = 0 '-0.3 * w
y = 0.1 * Scale * ScaleRatio
.DrawImage(CupidGif, x, y, w, w)
'draw heart
w = 0.3 * Scale * ScaleRatio
x = (Scale * ScaleRatio) - (0.7 * w)
y = 0.2 * Scale * ScaleRatio
.DrawImage(HeartGif, x, y, w, w)
'draw all positions dark arrow
For c = 1 To countmax - 1
ax = Math.Floor(c) * (Scale / countmax)
ay = 25 + (10 * Math.Sin(-0.7 * c))
.ResetTransform()
.ScaleTransform(ScaleRatio, ScaleRatio)
.TranslateTransform(ax, ay)
.RotateTransform(-20 + (ax / 2))
.DrawPath(New Pen(Brushes.Blue, 0.1), Arrow1)
Next
If count > 10 And count < 20 Then
'draw highlight arrow
ax = Math.Floor((count - 10) * (Scale / countmax))
ay = 25 + (10 * Math.Sin(-0.7 * (count - 10)))
.ResetTransform()
.ScaleTransform(ScaleRatio, ScaleRatio)
.TranslateTransform(ax, ay)
.RotateTransform(-20 + (ax / 2))
.DrawPath(New Pen(Brushes.Red, 0.2), Arrow1)
End If
If count > 25 Then
.ResetTransform()
.DrawString("We Love VB", New Font("Rockwell Extra Bold", 24), Brushes.Beige, 0.1 * Scale * ScaleRatio, 0.4 * Scale * ScaleRatio)
End If
End With
End Sub
Private Sub Form8_Click(sender As Object, e As EventArgs) Handles Me.Click
timer1.Start()
End Sub
Private Sub Form8_Resize(sender As Object, e As EventArgs) Handles Me.Resize
Me.Invalidate()
End Sub
End Class

BACD and hold times for Call Queue

Hi Everyone,
Is it possible to include hold times/wait times for BACD call queues? Also, anyone run into issues when configuring BACD and the time it takes for it to ring in? We had an issue previously that where the call would enter the queue, wait 30 seconds or so, and then ring out. Unless this is normal.
Thanks as always,
HelpDesk

Hi Help Desk,
Its been a while since I configured this and I am not sure if the current versions of CCA allow for this change to take place.
I know on the command line that this is possible, but ultimately it would be better to use CCA to make the changes as I am not sure if it would recognize the change if you did it via CLI.
In the past as an alternative to hold times I did some work around's by pushing the BACD to an AA and putting in there some rudimentary options that would allow a user to go back into the line, but they would loose their position in doing so, but this shouldn't be a big problem.
Also in terms of entering the BACD, I havent see the 30 second delay before so I am not sure what is going on there and I cannot say for that that it is normal operations for it.
Cheers,
David Trad.
davidtradconsultinggmail.com

Position-Velocity-Time vs Position Profile

Hello,
I have a
question concerning the behavior of position profile and PVT contoured move.
In the topic
“Position Profile-Motion Assistant Help file” says:
“Position
profile moves give you maximum control over the position of the move …”.
And in “Position/Velocity/Time
(PVT)-Motion Assistant Help file” it says “PVT moves give you maximum control
over the velocity of the move at certain times throughout the move.”
So, it’s
correct to say that the position generated by a PVT based contoured move is “less
accurate” than the one generated by a position profile in respect to the
original data points?
If yes, is
there any way to know in advance maximum position error?

Hello DJ L,
The PVT
examples work fine. I’m using Motion Assistant 1.2.
I’m trying
to do a 2D move that have 2 different velocity profiles. I only have XY
coordinates, the maximum cruise velocity and the maximum acceleration that my setup
supports. One profile is used for straight (or almost straight) moves and the
second at a much lower speed in curves.
I think
that what is causing my problem is a constraint that is out of range like you
said. I managed to get a few points to be plotted by Motion Assistant. But the
resulting velocity profile is unacceptable for this application (see file
Profile1.png and PVT_Profile1.txt for data). Adjusting the time index by trial
and error I get a more appropriate velocity profile for my needs (see file
Profile2.png and PVT_Profile2.txt for data). The constraints for this
application are:
- Go to
the maximum cruise velocity in the least amount of time (given the maximum allowed
acceleration).
- Maintain this
cruise velocity with the minimum variation until the next change in velocity
profile.
- The XY
coordinates defines a cutting path, so distortions in position should be minimum.
I’m looking
for a set of equations that could generate data in the PVT format that meet
this requirements and it should be possible to put this in C++ program because adjusting
and testing in Motion Assistant application would not be possible. Could you help me in developing those equations?
The file “data_profile.xls”
is one real example and contains XY coordinates with the respective move
constraints.
Regards,
Attachments:
files.zip ‏141 KB

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Safari opens in a different window position each time it starts.

I have multiple desktops and my web browsers, Safari and Firefox both open in the same desktop. If I position Firefox in a particular position, it opens in that position every time. Safari will open wherever it wants. At the top under the menu bar one time. On the bottom of the screen the next. Or anywhere in between. The window size stays the same, just screen position changes. and it's totally random. And it's the only app that does this. It's a very minor issue but it does become annoying after awhile. I'm running Mavericks on this computer but it does this on my Mountain Lion computers as well. So it's had this issue for a few versions. I'm pretty sure it's only started this in the most recent versions.
Has anyone else noticed this and if so, is there a way to get it to open in the same window position every time like it used to?

See if deleting the cache helps..
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that does't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Positive & Negative Time Recording.

Hi all,
Could anybody explain about the positive & negative time recording ( with clock times & without clock times )
In which situations with clock times and without clock times are used in negative time management.
Thanks in advance
Regards
Sujana

Time Management can be bifurcated types:
1. Positive Time (+ve Time) Positive time is plays the total role of workflow. All the processes related to time are automatically gets executed in the background. E.g., in our case it is done only partially to validate the attendance as per punches and other documents with shift timing and generate absence automatically in case of any discrepancy.
2. Negative Time (-ve Time) Where the all time related activities like validation of the attendance, posting of absence for wage deduction etc are done manually. It has less level of integration among the different components of time management.

Do I need to keep my external hard drive connected at all times for time capsule?

Do I need to keep my external hard drive connected at all times for time capsule?

Hi,
I have a similar question. I have backed up my external hard drive through my computer, onto my TC. When I go into TM, it doesn't show the external hard drive unless it is connected to the computer. Can I access the info from the external hard drive that is on the TC if I don't have the hard drive plugged in? If so, how can I do that?
Thanks,
Bernadette

How to get users' login logout time for user IDs for a specific date?

Dear All,
There is a case I being requested to retrieve the Userid, User Name,
User Group, User Dept, Date, Login Time, Logout Time in a specific date, for example, 21.05.2009.
How should I retrieve the information? The user want to input specific date and user group then return the details that mentioned above.
I try with SUIM->Users->By Logon Date and Password Change... but I can't specific the date that I want ...
I try with SM19 (Security Audit Log), but unfortunately in my system this is not activated.
I've seek for SAP's advise, and they say need to ask abaper to developr a report in order to get such details....
Do you guys have any other methods?
Do you guys know which tables will contain the details as mentioned above?
Best Regards,
Ken

Unfortunately without the audit log, you're going have a hard time finding this information. As mentioned, ST03N will give you some information. If your systems daily workload aggregation goes back to the date you require then you'll be able to get a list of all users who logged on that day. ST03N doesn't keep time stamps just response times.
My only idea is VERY labor intensive. If your DB admin can retrieve a save of the database from that day then table USR02 will hold a little more information for you. It will contain last login times for that day. If your system backup policy happened to have saved the contents of folder "/usr/sap/<SID>/<instance>/data" then you potentially have access to all the data you require. The stat file will have recorded every transaction that took place during that day. If that file is restored you could use program RSSTAT20 to query against it.
Good luck and turn on the audit log as it makes your life much easier!

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Position Vs Time for LVDT

Similar Messages

Maybe you are looking for