Possible Bug on More Button & Submenu in Help Desk App

This behaves the same in 7.4.6.5 + 7.4.7.0
Seems to be a rouge ajax? css coding error/bug
and
This topic first appeared in the Spiceworks Community

I have tracked down my problems to a call to sasl_decode in prot_fill (in imapd).
To recap: I am getting IOERROR: unexpected end of file in my imapd log file. The client interface is also slow and sometimes crashes.
It turns out that if the client has Kerberos GSSAI authentication and the client tries to do an "APPEND" command (which is what the imap protocol uses to add a message to an existing mailbox), the APPEND frequently fails (but not always). The rest of my Kerberos stuff appears to be fine.
The APPEND is sent across to the server. The client can be set up to do LITERAL+ or not. The client sends all of the message in either case. The server reads all of the packets. Usually the first packets go through the sasl_decode and result in valid text. But after the first block (4096) or so of data, the remaining data is lost and sasl_decode reports back that there is only two valid characters. No errors are reported back (that I am aware of).
I ended my quest at this point last night and I probably will not pick it up again. For now, I can work around the problem by switching to plain authentication and just set up a VPN before using mail.
I hope this helps whoever follows in my footsteps...
Perry

Similar Messages

  • Possible bug with Tab Control and Context Help?

    I created Description and Tip text for each Tab of a tab control I am using on my front panel.  I have a subVI that is called by selecting a menu item from my main front panel.  The subVI's front panel also has a menu system and a Tab Control.  I have Description and Tip text written for each of the tabs on the subVI's front panel.
    When I enable context help from the menu of my main VI, the proper help text shows up for the tabs on the main vi and, when I bring up the subVI's front panel, for its tabs as well.
    So far so good...
    Now I builld the application and run it as an executable.  For ALL of my panel tab descriptions, I get the tab's label in bold text, but no description (just a blank area).
    Is this a bug in LabVIEW?
    Kevin 

    wired wrote:
    I'm still seeing this behavior in LV8.2.1.  Does anyone know if/when it was fixed?  Also, my tip strips show up in the corner of the monitor when I mouse over a tab (in both the executable and the development version).
    I see it still even in 8.5.  
    The Help part of the bug is still NOT fixeed by NI.
    But I dont get the tool tip appearing in the corner of the monitor, it is showing up as usual.
    - Partha
    LabVIEW - Wires that catch bugs!

  • Possible bug with HTML emails and attachments from Mail.app

    I'm trying to send an attachment with an HTML email from Mail.app and getting unexpected results. I've been messing around with the order that things get added to the new e-mail and it seems that I can have either an attachment or I can have HTML email, not both.
    The code... (of course simplified)
    tell application "Mail"
    set new_message to make new outgoing message with properties {subject:"A subject", sender:"[email protected]"}
    tell new_message
    set visible to true
    make new to recipient at end of to recipients with properties {address:"[email protected]"}
    tell content to make new attachment with properties {file name:alias "Path to your file as string"} at after the last paragraph
    set html content to "<head><body>Some HTML here...</body></head>"
    end tell
    send new_message
    end tell

    etresoft wrote:
    The problem is that there is no such thing as HTML email.
    Well, I wonder what I have been generating for over three years now. RTF ? Because it sure looks like HTML. I must agree that HTML is not documented or even mentionned in the Mail AS dictionnary, but it does work, though you must specify visible to false so that it does. Here's my sub:
    tell application "Mail"
    set DMF to default message format
    set default message format to plain text
    set newMessage to make new outgoing message with properties {subject:theSubject}
    tell newMessage
    set visible to false
    set sender to theSender
    make new to recipient at end of to recipients with properties {name:Photographer, address:theAddress}
    set html content to "<html><head><title>" & theSubject & "</title></head><body>" & "This is an automated response." & theSource & "Find your personnal planning on the web: " & thelink & "
    </body></html>"
    end tell
    send newMessage
    set default message format to DMF
    end tell

  • Self Hosted Help Desk

    I am creating Users for my IT team and notice that the links go to track.spiceworks.com. I notice that this creates a user for the Help Desk App and on the community pages. Before I move forward I just want to know if what if any information of help desk app is shared with spiceworks servers. I don't want our things like ticket information or users credentials being stored where we don't have control over access. Thanks 
    This topic first appeared in the Spiceworks Community

    Hi Adam,
    Thanks for your fast response.  I think the problem I had was that I am not a coder and use Muse as it should be,  for someone who is more of a designer instead.
    The issue, which was one that I could not find any information, resolution not instructions about, is that you must do all you have stated to add self hosted fonts into Muse and your computer, these will then work perfectly in Muse and if you "Preview Web Page in Broswser".... but will NOT show up if you PUBLISH the website to the internet, hosted fonts will change to a default.
    The ANSWER that is woking for me is that I am exporting to HTML first and the using Cyberduck or FileZilla as the FTP.... I had to create a file called FONTS in the root directory of my website and then dump ALL the font files.... SVG OET WOFF TFF (everything) into that file and make sure its published to my live site... that seems to work.
    It may be that if you use Muse own Upload to FTP Host direct to publish then it automatically will do this but when I export to HTM first it doesn't do it.
    I scoured the internet and could only find one reference to this and it may be that this is the answer to many peoples problems as it doesn't seem to be widely known that you have to do this.
    Roger

  • Strange bug -- adding one more button OR page causes Form warning to appear

    I'm building a simple interactive document in InDesign CS4 on the Mac, to be exported/delivered as a PDF. There are a few text-based buttons on the Master Page that are set to Go To a Text Anchor on Release. There are 4 buttons of these buttons on the page, and each one leads to a different page in the document, and they all work fine. They are all built the same way.
    I want to export a PDF that opens cleanly in Reader, meaning no unexpected dialog boxes or warning messages appear. Up until this point, my document opens cleanly in Reader.
    However, when I create a FIFTH button (using the exact same method used to create the other buttons), OR I add ANY more pages to my document (which currently stands at 16 pages, but will need to ultimately be upwards of 40), for some reason, opening the PDF in Reader causes Reader to start displaying the large, distracting pink warning message at the top of the page:
    "Please fill out the following form. You cannot save data typed into this form. Please print your completed form if you would like a copy for your records."
    The fifth button I create (from scratch) causes this message to appear.
    Or, if I add another page (using my Master Page, where the buttons are used), this message appears. Even if the fifth button is not created, and I add another page from the Master, this message appears.
    If I add a blank new page (without using the Master Page), the message does NOT appear.
    So, for some reason, adding ONE more button, or referring to the Master Page in the document ONE more time by adding a 17th (or more) pages, seems to kick InDesign/Acrobat Reader into thinking my document is suddenly a form, and causes Reader to display that obnoxious pink message when opening the document.
    I've tried several troubleshooting steps.
    - I've ensured my buttons have unique names.
    - I've tried creating the fifth button from scratch, and also tried creating it from duplicating one of the existing "good" buttons.
    - I've made sure the button has a destination page/Text Anchor to go to.
    - I've opened the PDF in Acrobat Pro 9, and gone through all of the page and buttons in the Forms Manager, and there is nothing out of the ordinary in that view.
    Why is Reader suddenly thinking my document is a form (that "cannot be edited/saved") when I add one more button, or one more page!? It's bizarre, and quite frustrating.
    Thanks for any insights,
    Robbie

    You can use that same workaround with ID CS4 files. You just have to make the PDF and then go into Acrobat to add the security that doesn't allow editing (Acrobat -> Security -> Encrypt with Password) . That gets rid of the warning about the form. Of course if you actually have a form somewhere in your document, you won't be able to use that......

  • Possible Bug In Apex 4.0.2

    Hi Everyone.
    I would like to report what I think is a bug in Apex 4.0.2.
    If you go to my workspace on apex.oracle.com:
    Workspace = EEG
    Username = [email protected]
    Password = galaxy (all lowercase)
    Run the application: 37796 - Elie_Various_Goodies [no credentials are required]
    This app was imported from my 4.0.1 workspace at my job. On the page I created two Date Picker items, P1_BEGIN_DATE and P1_END_DATE. I set them up so that whenever a user selects a begin date, a dynamic action "MANAGE_DATES" fires and automatically sets P1_END_DATE to this selected begin date value. Now when a user goes to select an end date, the displayed calendar starts at the previously selected begin date rather than the default of "Today".
    All of this worked fine on my office (4.0.1) workspace. However, after exporting this app and then importing onto apex.oracle.com, none of this functionality would work. Even worse, whenever I try to select a begin date or even an end date, the selected dates never make it into the date picker fields. Displaying the "Session" window shows these fields as empty.
    It was only after I copied the two date picker fields and also re-created my dynamic action (P1_BEGIN_DATE2, P1_END_DATE2, MANAGE_DATES) did my functionality return.
    This behavior is quite strange. I can only think this is some sort of bug attributed to the export/import process when exporting a 4.0.1 app into a 4.0.2 workspace. I am not sure if this bizarre behavior happens with non-date picker items. Nor am I sure if this beavior would be repeated if I export/import from 4.0.2 into the another 4.0.2 environment.
    Another strange thing I noticed. If I change my date picker items to be "date picker (classic)" type items, the dynamic action does not work at all. This is true in both 4.0.2 and 4.0.1. I'm not sure if this a bug or not. It could be that the classic date picker is just not "javascript" enabled so to speak. If that is true, then it would have been nice if the docs would have warned us about this.
    Has anyone else seen this behavior?
    Thank you.
    Elie

    Hi Joel.
    First let me thank you for the warning about allowing "everyone" access to my workspace.
    You're correct, of course. Anyone could destroy anything within my workspace. I guess I was too trusting especially as I have seen many posts on the Forum where others have given access to their workspace so that responders can offer help. I really should be more discreet about this. Again, thank you. Needless to say, I have changed my password.
    With respect to the possible bug, the MANAGE_DATES dynamic action is intended to be a submit page because that is the only way I can see to get BOTH the P1_END_DATE date picker item as well as the end date textual field to be assigned the selected P1_BEGIN_DATE. I tried to use a dynamic action in which javascript sets the value of the end date textual field to the selected P1_BEGIN_DATE value. This works without the need to submit the page. Unfortunately, this does not cause the P1_END_DATE date picker item to default to this value. Instead, the default remains at today's date. This is why I finally resorted to a dynamic action that submits the page whenever a new value is selected (that is, a "change" event) from the P1_BEGIN_DATE date picker item.
    All of this works in my office 4.0.1 environment. However, I was puzzled when this fails under 4.0.2 on the hosted web site at apex.oracle.com. This is why I posted a "possible" bug in 4.0.2.
    I hope this all makes sense.
    One more thing, as already mentioned in my original post, this "defaulting a date picker" functionality does NOT work at all for the "classic" date picker items in both 4.0.1 nor in 4.0.2. I realize one can implement this functionality (I' guessing) my using, say, a "onChange" javascript call to submit the page. It's just funny that the "classic" date picker items are not acted upon by the dynamic action MANAGE_DATES that submits the page.
    Thank you.
    Elie

  • Is it possible to run more than one case at a time?

    Using a case structure, is it possible to have more than 1 case running at a time? I'm currently using a for loop's iteration terminal to select which case to run but each case contains a for loop with a timer delay. I want them all to run simultaneously somehow..?
    Maybe possible using a different type of loop?
    Thanks for any help.
    Rob

    > Using a case structure, is it possible to have more than 1 case
    > running at a time? I'm currently using a for loop's iteration terminal
    > to select which case to run but each case contains a for loop with a
    > timer delay. I want them all to run simultaneously somehow..?
    > Maybe possible using a different type of loop?
    >
    If it did this, we'd consider it a bug. By design, only one diagram of
    a case is supposed to run, the one the selector specifies. If you want
    them to run in parallel, put the contents into separate case statements
    and use a Boolean to either run or skip the code.
    For example, if you have cases run whenever their bit is set in an
    integer, then you would have cases for bit 0, 1, 2, and 3. Instead of
    putting them in one case, make fo
    ur cases. Put the AND logic in front
    of each for ANDing with 1, 2, 4, and 8, and wire the output Boolean to
    the case structure. Now take i and wire it to the logic. The 0 diagram
    will run on odd numbers, etc.
    Greg McKaskle

  • Possible Bug with Drag-and-Drop Being Published via HTML5 - Getting "Undefined" Error When Dragging Object

    Hello,
    I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities.  Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
    My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format.  Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
    To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction.  I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
    Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
    Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
    It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
    Drag the Yellow (or variable drag box) to the drag target.
    Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
    Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
    Move both draggable boxes to the drag target and use the undo and reset buttons...
    Anyhow, I know you all are sharp and will run the demo through its paces.
    I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
    I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request -  save the darn "undefined" message that comes up!
    Many thanks in advance for any help and/or direction that you all may be able to provide,
    Paul

    Hello,
    I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
    I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
    I did go ahead and submit this to Adobe as a possible bug today.
    Thanks again for any help related to this issue.  If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks! 
    Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
    ~ Paul

  • Safari's "Report Bugs to Apple" option in the Help menu

    On submitting a bug report (via the "Report Bugs to Apple" option in the Help menu), I get a generic Windows XP message saying "Safari Web Browser has encountered a problem and needs to close. We are sorry for the inconvenience." after which Safari closes itself down.
      Windows XP Pro  

    This appears to be part of a wider issue with clicking particular dialog buttons. See http://discussions.apple.com/thread.jspa?threadID=995474&tstart=0 for more info.

  • E72 - Possible to have more than 2 email accounts ...

    E72
    So is it possible to have more than 2 email accounts shown at the home screen?
    Currently one is set as primary and the other as secondary.. I have 4 email addresses I want shown at the main screen..
    Please help.

    jane999 wrote:
    Basically I want to share A1 with somebody else and we both use yahoo email. So I need to sign out before she can sign in. Any way to do that? 
    Thanks in advance for any help!
    You didn't specify whether you are using the "official" Yahoo mail app, or some other email application like K-9.  But either of those allow for the specification of multiple email accounts, and you don't even really need to sign in/out.  Once you set up the accounts within the app, just select the email account that you want to view.  It might be a little more problematic if you want to prevent each other from being able to see the other's email, however.

  • How do i add a "More" button to my longgg page, like Twitter has

    I was just wondering if anyone knows how to shorten a long webpage by adding the "more" button. I realize i can add a button - hyperlink it to a new page, but how do i keep it nice like twitter's pages. By keeping all the articles i have on the same page. I viewed the source on one of my followers twitter pages and they had this code, i am assuming it has something to do with the button, not sure if it helps at all.
    <<img class="loading-spinner" src="/images/spinner.gif" style="display: none;" alt="waiting" title="waiting" height="14" width="14"/>>
    also for another spot on the page they had this code (since the spinner image above is on their server) so maybe it will help in making new code for my site.
    http://a1.twimg.com/a/1273875281/images/spinner.gif
    I want to add this "button" to my BVI news page here:
    http://www.vistadelmarbvi.com/Site/B.V.I._News.html
    since it is getting really long and i would rather not add new pages for articles to come, if i dont have to.
    Thank you

    Regarding your buttons.
    Move the textbox into view. I said that earlier.
    And remove the elem.style.left = '0'; code.
    The reason it's not showing in FF and MSIE is probably that they do not know how to display it.
    In such cases you have to find an alternatve.
    And the sites you mention have great feats.
    What I do is to study the code to see how it's done and then try to use it on my own pages.
    With iWeb it's a bit more challenging.
    But it can be done, as I showed.
    Here's the JavaScript (not Java) :
    http://www.wyodor.net/_Demo/DynamicAssets/javascript.js

  • Is it possible to email more than one photo at a time with the iPhone? Thanks

    Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

    Yes.  Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email.  Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

  • Using Maverick, how is it possible to open more than one calendar window?

    Hi, I'm using Maverick 10.9.1
    My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
    Many thanks in advance for your help!
    ph

    See if the section on group calendar helps.
    http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

  • Is it possible to print more than one picture at a time on a single page and if so, how?

    is it possible to print more than one picture at a time on a single page and if so, how?

    Hi Rowegarth.
    HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
    You could also start with a "Design Your Own" collage print with a white theme.
    This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
    www.youtube.com/embed/VRoGjhXPm4I?rel=0
    The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings. 
    Hope this helps,
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • I have a earphone with mic but it doesn't work on my iPod 4G. Could there be a possible way to fix it. Please help :)

    I have a earphone with mic but it doesn't work on my iPod 4G. Could there be a possible way to fix it. Please help.
    -Reyner

    Hi chrissyfromrenton,
    you just have to close completely you Ipod (push 5-10 seconds on the button to open/close you ipod and slide the turn off) after open the ipod and it suppose to be correct I hope I answer to your question!
    Annie

Maybe you are looking for