Possible overflow for jvmRuntimeHeapSizeCurrent using SNMP?

I'm trying to use SNMP to monitor a managed server (WebLogic 8.1 SP4) and am trying to get the value for the attribute jvmRuntimeHeapSizeCurrent (which has the OID 1.3.6.1.4.1.140.625.340.1.30). The server is configured to start with 2 GB of RAM. The returned value for that attribute is -2147483648 which I think indicates an overflow. The SNMP data type for that OID is INTEGER.
Am I running into a bug? Or does that negative integer indicate something else? Since an INTEGER type cannot have a value more than 2147483647 (approx 1.99 GB), what might be the returned values for Heap sizes greater than 2 GB?
If I should be asking this question elsewhere please let me know where.
Thanks for any help on this.
Kartik

Hi,
I Found CR189563.
It seems the value returned in being stored in int variable which should be a long variable. I have explained that in CR. Engineering is evaluating it and right now it's marked for next release. I will keep you updated regarding any development on this CR.
You can get other statistics using other oid
http://e-docs.bea.com/wls/docs61/snmp/snmpruntime.html#1031510
Prasanna Yalam

Similar Messages

  • Calculate Bandwidth Utilization for E1 Using SNMP

    Hi.
    I need to calculate Bandwidth utilization for E1interface via SNMP.
    I tried to use information from this article http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008009496e.shtml
    Last night I've got the following data from my Cisco 3845:
    Timestamp
    ifDescr
    ifType
    ifSpeed
    ifInOctets
    ifOutOctets
    DifInOctets
    DifOutOctets
    InBandwidth
    OutBandwidth
    11/16/10 09:17:54
    Serial0/1/0:0
    propPointToPointSerial
    2000000
    843263887
    1375140745
    160094
    35355
    64
    14
    11/16/10 09:18:54
    Serial0/1/0:0
    propPointToPointSerial
    2000000
    859483004
    1377623371
    270318
    41377
    108
    17
    11/16/10 09:19:54
    Serial0/1/0:0
    propPointToPointSerial
    2000000
    873254258
    1380108133
    229520
    41412
    92
    17
    DifInOctets = delta(ifInOctets)/delta(time)
    As you can see I've got InBandwidth>100%
    Why it so?
    If I change ifSpeed from 2000000 to 2048*1024 bits per second (right value for E1 interface) it doesn't give me  InBandwidth<100%
    In attachment you can find a part of gateway config

    You may keep on cracking your head against equations, it's up to you. If I were you I would have already installed Oracle 10g Grid Control and I would already have configured a 6 month retention period for the performance statistics and setup a report of resource consumption.
    ~ Madrid
    http://hrivera99.blogspot.com

  • How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

    Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?

  • Is it possible to use Citrix for home-use and for free, Only one use?

    Hi
    I am a .Net developer so i need to have Microsoft Visual Studio and Microsoft Windows for my Work, but i like iPad 2 in Tablets so that i bought one, Now in a video i have seen that Citrix is such a professional Desktop and App Virtualization that it seems Microsoft Windows is running on iOS, so i want to use it but not for business and just for home use, is it possible to set it up for free?
    Best Regards,
    PK DEVELOPER

    Citrix does not allow iOS to run Windows. Citrix products are one of several ways to connect an iOS device to a system that does run Windows and allow the iOS device to take control of that Windows system. Citrix, to the best of my knowledge, does not make their back-end products (i.e. the software that runs on the system to which you want to connect) available for free; it's usually quite expensive as it's intended for enterprise use.
    Citrix for home use would almost certainly be vast overkill, though. Just do a web search for "VNC". VNC is a solution for Windows and iOS that would allow you to take control of your Windows system.
    Regards.

  • Looking to download trail version of cc App and then install it on personal computer for offline use. Is this possible?

    Looking to download trail version of cc App and then install it on personal computer for offline use. Is this possible?

    yes, Download Adobe Creative Cloud apps | Free Adobe CC trial
    but you must be online to install apps.

  • Is change to a recommendation setup possible for not using EMET GUI?

    Hello.
    Is change to a recommendation setup possible for not using EMET GUI?

    Hello.
    ↓TEST
    1.EMET4.1 Inst
     EMET Setup.msi /quiet /norestart
     "C:\Program Files\EMET 4.1\EMET_Conf.exe" --import "C:\Program Files\EMET 4.1\Deployment\Protection Profiles\CertTrust.xml
     "C:\Program Files\EMET 4.1\EMET_Conf.exe" --import "C:\Program Files\EMET 4.1\Deployment\Protection Profiles\Popular Software.xml
     "C:\Program Files\EMET 4.1\EMET_Conf.exe" --system Pinning=Enabled
    　→recommendation setting OK
    2.EMET5 Inst
     EMET Setup.msi /quiet /norestart CONFIG_OPTIONS=15
      "C:\Program Files\EMET 5.0\EMET_Conf.exe" --import "C:\Program Files\EMET 5.0\Deployment\Protection Profiles\Popular Software.xml
     →recommendation setting OK
    3.EMET5 Maximum Security Setting（GUI）
    4.EMET5 UnInst
     msiexec /q /x {ID}　
    5.EMET4.1 Inst
      EMET Setup.msi /quiet /norestart
     "C:\Program Files\EMET 4.1\EMET_Conf.exe" --import "C:\Program Files\EMET 4.1\Deployment\Protection Profiles\CertTrust.xml
     "C:\Program Files\EMET 4.1\EMET_Conf.exe" --import "C:\Program Files\EMET 4.1\Deployment\Protection Profiles\Popular Software.xml
     "C:\Program Files\EMET 4.1\EMET_Conf.exe" --system Pinning=Enabled
    　→recommendation setting NG
    Result
    　EMET5、EMET4.1 Maximum Security Setting（GUI）　→　recommendation setting（CUI）　→　NG
    　EMET5、EMET4.1 Maximum Security Setting（GUI）　→　recommendation setting（GUI）　→　OK
    Anticipation
    　It can return only by GUI？

  • Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

    You should ask in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Is it possible to use Apple's fonts for commercial use?

    Is it possible to use Apple's fonts for commercial use?
    Thank you very much.

    Here's a look at the font agreement section from OS X Mountain Lion:
    E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included with the Apple Software to display and print content while running the Apple Software; however, you may only embed fonts in content if that is permitted by the embedding restrictions accompanying the font in question. These embedding restrictions can be found in the Font Book/Preview/Show Font Info panel.
    So basically, you need to examine the fonts to see if there are notes on usage restrictions or limitations.

  • I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...

    I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...
    I dont have any contact detail of that person whom i had bought this phone..

    If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

  • Bought upgrade on appstore. now it says its not available for download in indian store. how is it possible to buy it using indian currency!!!!????

    Bought upgrade on appstore. now it says its not available for download in indian store. how is it possible to buy it using indian currency!!!!????
    Any solution

    HI,
    No  SOLUTION FROM HERE, but I have an unresolved issue with similar overtones.
    As a new member, having had a birthday gift from a family member in another country, I am dismayed to find out that there is an unresolved business logic issue, which will allow me to own a MacBook Air, but because I live in a different country to the place of purchase there is a big No No. Additionally, my pension provideds me with a credit card from that first origin, but I am forbidden from buying any software elswhere? Apple seem reluctant to discuss this with me, but  some solutions have been offered to get me the free downloads?
    Does this come under 'unfit for purpose' and/or 'dodgy trading'? Apple unspoken message, buying from abroad. Dont go there!
    Any help or views?
    (Limbo) Cyfrommayo

  • HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

    GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

    Please don't shout.
    Has the unit EVER been jailbroke?  Has it EVER been dropped?  Did it EVER get excessively wet?  Did you EVER load a pirated developer's version of the IOS?
    If "No" to all the above, first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • Using SNMP is it possible to find the vPC peer link of a Nexus 5K?

    I'm trying to use SNMP to get the Peer Link pair...

    hi,
    You can include 0calyear characteristic before the structure in the column and set it to no display and show result row.
    regards,
    Arvind.

  • Is it possible to unlock a Verizon iPhone 4s for domestic use?

    I have an iPhone 4s that has completed its two-year Verizon contract and I am hoping to use it with another carrier (Cricket) I was told by a Verizon technical advisor that while they don't do the unlock themselves that I could do it at "a Mom and Pop cellphone store or many other companies, like Cricket, will do it for you" I had not told her which company I was hoping to go to. Turns out that no mom and pop stores and Cricket can do this--they all say it has to be done by Verizon. Any thoughts or suggestions? I have already unlocked the International portion but need it done for domestic (US) use.

    No, Verizon will only unlock an iPhone 4S for international use. And only Verizon can legitmately unlock the phone. 

  • Configuration of ping using SNMP rw on Cisco devices

    Hello,
    the customer would like to use SNMP RW access for configuration of ping on Cisco devices. He wants to use ping with the following parameters: destination address, length, number of packets and with DF bit set (it is very important for our customer). Is possible to use SNMP RW and which MIB (OID) is possible to use for it?
    Thank you very much.
    Roman

    Hi ,
    Extendeing ping with SNMP, unfortunately this is not possible at this point, the only MIB for "ping" features is
    CISCO-PING-MIB and it does not contain any OID allowing an extended ping.
    Please check the below link for more information:
    http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-PING-MIB
    http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8e.shtml
    I hope this information will help you !!!
    Thanks--
    Afroj

  • Shutdown service in ACE using SNMP

    Dear Mister
    Is possible to configure, shutdown a service using SNMP? More than this, in a context???
    I am searching the OIDs about it, but, I am not lucky.
    Regards and thank in advance

    Hi,
    I don't think so. You have list of MIB's available which can fetch data from ACE but there is no such provision to shut down the service using SNMP. The ACE supports traps and SNMP get requests but does not support set requests to configure values on the device. Please visit the below link for more information:
    http://www.cisco.com/c/en/us/td/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/administration/guide/admgd/snmp.html
    Regards,
    Kanwal

Maybe you are looking for