Possible Xcelsius conflict with IPv6

Xcelsius and IPv6:
We ran into an interesting issue on a client site this past week. First time implementing an install on a Windows Server 2008.
Environment:
Win Svr 2008
IIS 7
Ipv6 & Ipv4 enabled
BOE 3.1 w/ Xcelsius 2008
The install went flawlessly with the ability to export objects/reports to the enterprise system, etc - with no problems. However, Xcelsius had issue with trying to connect to the CMS when trying to save/export to BOE 3.1 (and ONLY Xcelsius)
We noticed they are running a NIC with IPv4 and IPv6 simultaneously (clearly listing a long hexidecimal IP address labeled IPV6 in IPCONFIG)
So we went into the CMC/CMS properties and there is a box to manually enter an IPv4 and IPv6 IP address, respectively. If you try to enter addresses in both boxes, when you restart the CMS -- it will reset back to the default which automatically obtains the host. Therefore, we entered purely the IPv4 address and restarted the CMS.
First issue resolved. We were able to then hit Enterprise from Xcelsius... until you tried to save. Then it thought the Input FRS was down. So we had to perform the same step for the Input FRS and force it to a static IPv4 address of the server.
Using the host name didn't work (that is the other option in the server properties for each service). I imagine you could play with the host file, but then you may have to do that for each client.
In the end forcing the IPv4 address for the CMS and Input FRS properties did the trick, but it is strange because if you used the defaults -- the publishing wizard, for example, which hits the CMS and the Input FRS when importing objects -- didn't have a single problem. Only Xcelsius appears to conflict with IPv6.
Thoughts? We would have figured it would use the same methods to connect to communicate with enterprise as Crystal Reports client, publishing wizard, etc. However, I did notice in SAP's IPv6 documentation on the Support Portal, that although 3.1 does handle IPv6 -- Desktop Intelligence still does not. Perhaps Xcelsius should be added to that list in the documentation?
This is fine for a server with a static IP, but if for some reason their server is using a dynamic address and relying on the host DNS -- this could be an issue.
Thoughts?

HI,
I've heard this problem before, but I haven't heard of a resolution.
The NI's GPIB driver (NI-488.2) will not work with the Measurement Computing board. Not in LabVIEW 5 or 6. If you are using the GPIB VIs in LabVIEW 5 with the Measurement Computing board is because the MC driver replaced something.
A device driver is a software component that requires detailed knowledge of the hardware it manages. NI's driver is written to control NI's GPIB hardware ONLY. The same applies to the MC driver.
The driver also provides a Language interface, so that you can access the driver's functionality. To program in C, a driver will provide a header file with the function declarations and a dll (or static library). For LabVIEW the driver will provide the V
Is. These VIs are provided by the driver and developed by the driver manufacturer. Most likely these VIs are wrappers for the dll function calls. This mechanism hasn't changed between versions of LabVIEW.
You should contact Measurement Computing. They should be able to troubleshoot the problem, since they know what their driver installs.
DiegoF
National Instruments.

Similar Messages

How to Diagnose Microsoft Office Automation for conflicts with Xcelsius

When designing a Dashboard, there may be times when Excel errors will prevent you from using the Dashboards (Xcelsius) client tool. These issues typically include errors such as "Excel is Busy" or problems accessing Microsoft Excel while attempting to run Dashboards (Xcelsius).
Cause
Dashboards (Xcelsius) uses the Microsoft Office Automation libraries to interact with Excel, Word, PowerPoint, and Outlook. Likewise, third-party Office Add-ins also use these same libraries to function, which can possibly cause conflicts when using Dashboards.
Solution
Any conflicting Office Add-ins will need to be disabled while Xcelsius is in use. In some occasions, these Add-ins must be un-installed to be fully disabled. The OACheck.exe is a Microsoft diagnostic tool that will help test the health of the Automation Libraries and will also detect all Add-ins that might not be visible inside the Excel Options>Add-ins Menu.
Attached is a copy of Microsoft's OACheck.exe diagnostic tool along with step-by-step instructions. Rename the extension from .txt to .zip.
Edited by: Jon Teopaco on Sep 23, 2011 6:17 PM
Edited by: Jon Teopaco on Sep 24, 2011 1:57 AM

Hi Jon,
Thanks for your contribution.
I have suffered this issue many times and lost some of the valuable works. Unfortunately the link you have provided is not working.
This issue happens mostly when we use Bex analyzer and xcelsius side by side, bex usage is also unavoidable.
Thanks ,
Sriramvijay.R

MainStage message: possible conflict with third party midi or audio drivers

Just when I thought everything was going to be ok...
MainStage gives me a message that it detects a possible conflict with third party audio or midi drivers. The only midi device I'm using is class compliant (doesn't need a driver). My audio interface is an Apogee Duet and I'm using the most recent driver. Logic registers no such complaint. MainStage freezes. Any ideas?
Thanks,
Mark

Hello.
I am seeing this whenever MIDI events are being sent into either Logic or MainStage (primarily MainStage), while they are launching. On my setup, this will either crash the application during launch, ( sent to Apple ) or trigger this "...3rd party conflict / driver..." dialog.
In either instance, disabling incoming MIDI messages by turning them off on all connected MIDI devices, or as suggested, waiting to connect the device in question until, the application is fully launched, fixes my version of this issue.
** Please Note: In my experience, increasing the number incoming MIDI messages, exacerbates the issue and, makes a dialog or crash more likely to occur.
Hope this is helpful.

Is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

Hi,
There will be a “Post” list in that user’s MySite storing all the blogs that below to that user, we can delete all the blogs in that list if with sufficient permission in that
user’s MySite.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Possible conflict with Acquisition. Pls HELP/COMMENT.

I’m using the latest version 123.3. Somehow it conflicts with SAFARI, ie when Acquisition is on, no webpage can open in Safari.
It gives a 'Safari can’t open the page' error.

Have you tried lowering your upload/download bandwidth limits and the number of concurrent uploads/downloads allowed?
Yang

Possible confliction with external hard drive?

Hi guys, I'm sort of new here, but I could really use some help.
I love my iPod (30 gig Video), I've had it for just over a year, but last week it all of a sudden started screwing up on me. I'm sorry it's such a lengthy explaination, but I haven't been able to find help anywhere else... If you don't feel like reading it, essentially my iPod seems to be conflicting with my external hard drive.
I keep all my music on a 150gb external hard drive since my laptop's 30 gigs barely has any room left over with all the programs and photos I have on it. iTunes has worked fine in the past with playing/syncing music from an external hard drive but all of a sudden it's decided that iPod and Hard Drive don't mix.
When I have my hard drive plugged in by itself, everything is normal, and iTunes can play the music fine. Though once I plug my iPod in, iTunes and the whole computer freezes up. I get the usual "Do Not Disconnect" message on the iPod, and it seems to be doing something, but everything on the computer just stops. I can click the start menu, I can click the close button on iTunes, nothing happens... UNTIL I unplug my iPod. Then everything unfreezes and whatever buttons I clicked while the screen was frozen do their appropriate action. If I had clicked to close iTunes it would then close iTunes... If I closed iTunes while the iPod is plugged in (which does nothing), then unplug the iPod causing iTunes to actually close, I get a message saying that the iPod needs to be reformatted to work with Windows and I should restore the iPod within iTunes to solve that problem.
At the time, I hadn't tried the iPod alone, without the hard drive plugged in (since I keep the hard drive plugged in all the time), so I figured it was a problem with the iPod, rather than a problem with the hard drive.
So I took the "restore" idea, and went to my friend's computer, which is running Vista. He has iTunes, and his computer is fine. I plug my iPod into it, iTunes opens up, things work great. So the problem didn't seem to be with my iPod. I took the opportunity of having my iPod in a working iTunes environment on my friend's computer, and I restored my iPod, clearing all the songs off of it, which is not really a big deal, since all my songs are on my ext. hard drive anyway. I took my iPod back to my computer, and nothing changed, I still had that problem, and I then realised that the problem only existed while my hard drive was plugged in.
It was after I restored it that I realised if I unplug my hard drive, and have my iPod plugged in alone, everything works fine. It opens up iTunes, it's recognised by My Computer, things are normal, except for the fact that I can't do anything, since all my music is on my ext. hard drive, so I get to look at a whole library of songs with little exclaimation marks beside them. Syncing didn't do anything except transfer the handful of songs from my library that AREN'T located on my external hard drive to my iPod, and of course, once I tried plugging my hard drive in... frozen.
I managed to figure out that if I started iTunes with my hard drive plugged in (so iTunes would know that the songs are in the right location), then unplugged the hard drive, plugged the iPod in (so iTunes would recognise it), then plugged the hard drive back in, things would work alright, though when I tried syncing it, it went painfully slow and stopped after about 3 albums, and this process hasn't worked since, it just freezes up again.
I know I could just copy songs slowly to my computer, and sync them to my iPod from the computer rather than the hard drive, but that would take ages, and I'd like to have the problem fixed rather than to have to go through that process any time I wanted to change what's on my iPod.
So that's my problem. I've followed the "5 R's" that the support here seems to swear by, I have tried unistalling and reinstalling iTunes twice, I've uninstalled both iTunes and the iPod updater stuff, and then installed everything clean from the CD that came with the iPod. I've tried renaming the drive letters of my ext. hard drive and my iPod in case there was some sort of confliction there, nothing seems to have worked. I don't think I changed anything with my computer that would cause this change (I ever restored Windows to a date before this problem occurred), and as for the update to iTunes 7.4.1.2, I didn't update it until after this problem started, so it wouldn't have been caused by the update.
I hope that made sense... If anyone can give me some help as to how I can get my iPod back working on my computer I'd be incredibly grateful and thanks in advance!
If anyone knows what's going on, it's probably somebody here

This sounds like more of a Windows specific iPod problem. You may get better responses if you posted it in that specific section of the forums.

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

PP CS6 on Retina Macbook conflicts with YouTube/Pandora

I bought my Retina Macbook recently, and the first thing I did was to install Premiere Pro CS6 on it. I did the hack - inserted GeForce GT 650M to the list - and enabled the Mercury Playback Engine.
Ever since then, I've been having all sorts of problems, but the most annoying problem is that in the midst of editing, somehow Program Monitor would either freeze or black-out.
I seriously tried every possible ways I could do to resolve this as an average user. I tried resetting the preferences, switching the drives, turning the machine on & off, and all the magic joojoos. None of them worked, until I found out the problem starts to happen as I open other applications along with the Premiere Pro opened.
I began to wonder, does the graphic card or Premiere Pro CS6 conflict with any programs I have opened? So I tested it out.
I found out that while having CS6 and Safari (or any kinds of web-browsing programs) on, the "crashes" occur very often. I also found out it typically happens when I turn on Pandora and YouTube.
The moment I shut off the Pandora tab, YouTube tab, or even websites with any kinds of visual or audio media turned on, the freezing or black-out situation on the Program Monitor immediately stops. If turning off the tabs doesn't work, then quitting the program entirely solves the problem.
From what I've tested, it's for sure to say Flash or Video Playback on webpages conflicts with GT650M card. It's certainly not the software problem, because when Software Only mode is turned on, all the images come back on the Project Monitor. I mean, what kind of weird conflict is this?
Can anyone else with a Retina MacBook confirm this?
In case if Anyone is wondering, this is the setup I've used.
Retina Display Macbook Pro
16GB Ram option
256GB SSD option
NVidia GT650M 1GB VRAM
Video files in the SSD

It's absolutely woeful.
Like traveling back in time with modern software and putting it on last generation hardware... or two generations previous hardware.
What floors me the most is that there's not any spikes or even utilisation of the CPU and GPU going on... I have CPU and GPU monitoriing software for the more beserk applications I use. I checked them out when using Illustrator and Indesign. The CPU and GPU is hardly getting tickled... so it's JUST poor software engineering at work. VERY POOR software engineering.
There's at least 90% of the CPU and GPU power completely unused during moving operations and object creation. So it COULD be fast, and performant, if they cared to actually use the CPU and/or GPU more effectively/thoroughly when we want to DO something inside the software.
I don't even know how you'd code something this woefully under performant. You'd have to plan to do it, or be using MONO or some other uselessly single threaded, low priority frame work...
Maybe these apps are programmed in Java

VoiceOver conflict with arrow keys ??

I have just found that VoiceOver is in conflict with the Up/Down/Left/Right Arrow keys. If it is on the four keys do not work. I tried another keyboard to check whether it was a hardware problem and exactly the same happened with VoiceOver on. Why?
Until yesterday everything worked fine but suddenly I lost the arrow key functionality. Any ideas, anyone?
Note: I am not referring to the number pad and its keyboard mouse keys.

Hello Helen,
First of all, VoiceOver makes very heavy use of arrow keys, so you are right in suspecting that this is an oddity, and not a "feature" of VoiceOver.
I've managed to reproduce this behaviour with the following sequence:
1) Turn VoiceOver on (Cmd-F5).
2) Activate QuickNav (left and right arrows simultaneously).
3) Interact with an element containing only one item, via down + right arrows.
4) Arrow keys will only "bong". No movement possible until QuickNav turned off again. Otherwise, turning VoiceOver off will also restore the arrow keys to normal—until it's turned back on again, when it will once more get "stuck". Of course, stopping the interaction via left+down arrows also restores free movement—but with QuickNav active, only the VO cursor moves, not the focus, so that can be disconcerting when trying to navigate menus, etc.
So the solution may be to turn VoiceOver on, then ensure QuickNav is off (left + right arrows), then VoiceOver off again.
Hope this clears it up!
Archie

PCI USB2 Controller card conflicts with network card

I've installed a PCI USB2 controller card since my motherboard (IWill K266-R) only has support for USB1. However, the card seems to conflict with one of my network cards, because traffic on the internet-connected NIC is very slow, and often drops completely. Traffic to and from the other (local) NIC seems to work fine, though.
I have tried moving around all three cards in different PCI slots, I think I've tested almost every possible combination by now. I've also tried disabling as much as possible in BIOS, such as onboard sound, serial and parallel ports etc. I've tried lowering the FSB.
For now, I've removed the controller card, and is using the USB1 ports on the motherboard instead. This is very frustrating, though.
Does anyone have any suggestion on what I can try next? I've browsed forums, both this and others, but I haven't found any more hints on what to try. Could there be some setting in Arch that could affect these sorts of things?

"I guess the ATA100 card will work fine correct?"
If you mean large drive support, it may provide that or may require a firmware update to do so. You should check the manufacturer's web site for specifics. All ATA-133 cards do provide 48-bit LBA for large drive support. I'd return the Ultra ATA-66 card to the eBay seller, although many refuse to pay for return shipping, even when the mistake is their own, either through ignorance or deliberate misrepresentation. In cases such as this, it's sometimes more cost-effective to swallow the loss and keep the incorrect part.
"Will adding a jumper apply for a ATA100 card as well? I'll need a blue and gray ribbon correct?"
If you use an 80-conductor ribbon cable with color-keyed connectors, set the drive configuration jumper to CS and connect the drives to the cable as you wish (in terms of physical placement in the computer). If the ribbon cable doesn't have color-keyed connectors, set the jumper for the device connected to the end connector as Master and the drive (if any) connected to the middle connector as Slave.

I have a g4 powerbook 12" 1 gig processor running os 10.3.9 . I have conflicts with anything google. What is the highest os version i can install ?

I have a g4 powerbook 12" 1 gig processor running os 10.3.9 . I have conflicts with anything google. What is the highest os version i can install ?

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Win SDK function conflict with CVI library function

I do not have SDK_CONFLICT_PRIORITY defined. Is this new to CVI 2009?
The following code gives me an error "11, 58 Too many arguments to `CVI_WriteFile'."
#include <windows.h>
#include <formatio.h>
void function (void) {
 HANDLE hHandle = INVALID_HANDLE_VALUE;
 char buffer [1000] = {'\0'};
 DWORD dwWriteCount;
if (!WriteFile (hHandle, buffer, 5, &dwWriteCount, NULL)) {
I have included <windows.h> before <formatio.h> but CVI still wants to use the formatio version of WriteFile - it appears to have been renamed CVI_WriteFile ?!?!?
If I eliminate the #include <formatio.h> it compiles OK.
Message Edited by menchar on 03-06-2010 04:00 PM

Well, the complete source for formatio.h I reported before is this one:
#ifdef _NI_mswin32_
extern int CVIFUNC cviprefix(CloseFile)(int handle);
extern int CVIFUNC cviprefix(OpenFile)(const char *filename,int rd_wrt, int action, int bin_ascii);
extern int CVIFUNC cviprefix(ReadFile)(int handle, char *buf, int count);
extern int CVIFUNC cviprefix(WriteFile)(int handle, const char *buf, int count);
extern int CVIFUNC cviprefix(SetCommitMode)(int commit);
#define CloseFile cviprefix(CloseFile)
#define OpenFile cviprefix(OpenFile)
#define ReadFile cviprefix(ReadFile)
#define WriteFile cviprefix(WriteFile)
#define SetCommitMode cviprefix(SetCommitMode)
#else
In the header this warning is present:
/* This header must be included after any Windows SDK header or any header */
/* that directly or indirectly includes a Windows SDK header. */
/* Some of the function names conflict with Windows SDK functions. */
As far as I can understand (but I'm not an expert on these very technical and tricky aspects of C) first of all CVI functions are renamed CVI_xxx, after it a call to WriteFile or any other function in that group is defined to be translated to CVI_WriteFile, so when you call WriteFile the preprocessor actually translates it in the CVI version of the function and SDK one is superseded.
My understandment is that if you undefine WriteFile, you can actually use both functions if you want: native CVI one by calling CVI_WriteFile and SDK one by simply calling WriteFile.
...or I can be missing some other hint, which can surely be possible!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Airport conflict with television setup?

so i just set up my airport right next to my television setup (direct TV tivo), and now the tivo will not respond to the remote control... is there some kind of conflict going on there? well, obviously, duh... anyone else ever have this problem? any ideas for solving it? thanks in advance...
imac Mac OS X (10.4.8)

chalkyp, Welcome to the discussion area!
Typical TV remotes use infrared which shouldn't have any conflict with a wireless network.
Is it possible that your remote is an RF remote operating at 2.4 GHz? That could be affected by the wireless network.

Bluetooth mouse lags often. Maybe conflicts with Wi-Fi, using same band?

My Bluetooth mouse, a Logitech v470 laser mouse, lags often on my MacBook Pro. I'm thinking that maybe it could be conflicting with my Wi-Fi, which is also enabled, and which uses the same band as Bluetooth – 2.4 GHz? Could this be the reason for the lag? My Wi-Fi also drops sometimes, so I don't know if the two are related or not.
Could someone care to shed some light on this? I've read several other threads on these forums and noticed that other people are having similar issues, and would greatly appreciate a response.
Thanks in advance!

Yes, they can interfere. Try using a lower channel number on Wifi or switch to the 5Ghz channel if possible.
http://support.apple.com/kb/HT1365
Regards,
Captfred

Possible Xcelsius conflict with IPv6

Similar Messages

Maybe you are looking for