Post Instalation Configuration for NW2004s SP7

Hi,
I installed NW2004s SP7 and its installed sucessfully.
now if i want to connect JCos and RFCs i need to do some post installation configuration.
so please let me know what things i need to do.
i am unable to connect R3 system.
so plese let me know as soon as possible.
regards
mmukesh

Hi
See this Sample
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/f0b0e990-0201-0010-cc96-d7ecd2e51715
see this help
http://help.sap.com/saphelp_nw2004s/helpdata/en/01/43e13d82fcfb34e10000000a114084/frameset.htm
See this thread
Re: Can't get RFC connection to R/3 System
Kind Regards
Mukesh

Similar Messages

Do i need the POST-INSTALLATION configuration for linux+oracle?

hello
i install the oracle10g on redhat9 box,JUST finish the installation,i open the Terminal windows,type Â¨sqlplusÂ¨ command,linux tell me Â¨commnd not foundÂ¨. i guest the installer donÂ´t set the env variable(in windows operating system,the installer automatically set the path variable during the install procedure).
i can SUCCESSFULLY access the browser console of em and isqlplus.
but after i restart the redhat,the browser canÂ´t access both
em and isqlplus(connection reset).when i telnet the 5500 and 5560 port,i found that they havenÂ´t be open.and i suspect that the oracle database havenÂ´t been automatically started.
question 1:how can i MANUALLY start oracle after i restart the linux?
question 2:how can i config the oracle after the install to make it work perminently?or post-install configuration.
thank you very much!

Oracle will not start automatically. You have to enter as oracle user and start the listener manually and then the database .
Command are like : lsnrctl start
Then , type svrmgrl ( the server manager console ) , connect internal , and then startup .
Later on you can write scripts for automatic startup of the database and listener .
G J Shankar Nath
Deputy System Manager
GNRC Limited

ABAP & Java Preview install done. Need Post install steps for XI.

Hi
Please excuse for the most basic question.
From the trial downloads, I've installed the
ABAP and Java and would like to know the
post-install steps for activating and configuring
the Exchange Infrastructure component and
subsequent configuration
I've installed on the local host along with the
Microsoft Loopback Adapter. What should be
the connection parameters for the Visual
Administrator?
Any help is appreciated. Thank U.
Rajendra.

Hi Rajender
I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
Coming back to your post:Go through the below link
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Re: XI INSTALLATION and POSTINSTALLATION
If you need the XI configuration guide then visit:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Any issues feel free to ask
Reward with suitable points:

Post Install Steps for EP7.0

Hello Guru's.
I am looking for a listing of needed Post Install Steps for EP7.0. I have the installation guide for NW2004's SR1 ABAP+JAVA on AIX: Oracle and the NW2004s Master Guide. Is there any thing else I should have? I am not doing the actual install, just the post steps.
Thanks,
Chris

Hi,
Start with this: http://help.sap.com/saphelp_nw2004s/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Marc.

Post Install steps for htmldb 1.6.1

I am done with a new installation on RHL
- 10g DB install on ORACLE_HOME1
- Standalone 9.0.4 Http Server for the CCD on ORACLE_HOME2
- Install of HTMLDB 1.6.0 and later patch of 1.6.1 error free
I am following the post installation steps for configuring the DAD and I am unable to find the file "wdbsrv.app". I am on page 22 of the HTMLDB installation guide (B14498_02.pdf)
How do I configure the DAD and up my htmldb.
thanks
-/srinath

I am still having issues .....
I get INVALID LOGIN CREDENTIALS - logging as ADMIN/HTMLDB in the /pls/htmldb/htmldb_admin page
I unknowingly unlocked and changed the passwords of HTMLDB_PUBLIC_USER and other users
to "htmldb", but IMO that should'nt matter because I used "htmldb" as the password during
the initial install too. So....
the access log has this:
172.16.4.57 - HTMLDB_PUBLIC_USER [01/Apr/2005:13:13:33 -0800] "POST /pls/htmldb/wwv_flow.accept HTTP/1.1" 302 165
172.16.4.57 - HTMLDB_PUBLIC_USER [01/Apr/2005:13:13:33 -0800]
"GET /pls/htmldb/f?p=4550:10:1949690027032632943&notification_msg=Invalid%20Login%20Credentials/344577F9B4C4782C9D0F6CCC888077AB/ HTTP/1.1" 200 6688
172.16.4.57 - HTMLDB_PUBLIC_USER [01/Apr/2005:13:13:42 -0800] "POST /pls/htmldb/wwv_flow.accept HTTP/1.1" 302 165
172.16.4.57 - HTMLDB_PUBLIC_USER [01/Apr/2005:13:13:42 -0800]
"GET /pls/htmldb/f?p=4550:10:1949690027032632943&notification_msg=Invalid%20Login%20Credentials/344577F9B4C4782C9D0F6CCC888077AB/ HTTP/1.1" 200 6688
my dad looks likes this:
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword htmldb
PlsqlDatabaseConnectString biz1:1521:e5dwhdb1 SIDFormat
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
I tried this from the FAQ section but get this:
SQL> begin
2 wwv_flow_api.set_security_group_id(p_security_group_id=>10);
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> ed /tmp/z
wwv_flow_api.set_security_group_id(p_security_group_id=>10);
begin
wwv_flow_fnd_user_api.create_fnd_user(
p_user_name => 'myself',
p_email_address => '[email protected]',
p_web_password => 'mypasswd') ;
end;
ERROR at line 1:
ORA-20001: Unauthorized access (wwv_flow_api.set_credentials not set).
ORA-06512: at "FLOWS_010600.WWV_FLOW_FND_USER_API", line 19
ORA-06512: at "FLOWS_010600.WWV_FLOW_FND_USER_API", line 429
ORA-06512: at line 2
===============================
thanks in advance for your insights
-/srinath

Post Installation Configurations for WAS640

Hello All,
We have installed Sneak preview of WAS640.We have also installed SAP on the same system.
What do we need to do as part of post installation activities for accessing the data from our SAP system.
We have also developed a dynpro application in which we would like to fetch the data from SAP and then displaying the data on the User Interface.
We are unable to fetch the data from the SAP system.
What steps needs to be carried out to fetch the data from SAP?
Do we require Exchange infrastructure for the same.
Also can anybody please tell me when would the full fledged version of WAS640 be available?
Pradeep

> Hello All,
> We have installed Sneak preview of WAS640.We have
> also installed SAP on the same system.
Since all of this is from SAP, i guess you mean an ABAP system.
>
> What do we need to do as part of post installation
> activities for accessing the data from our SAP
> system.
Some mandatory activities to access an ABAP system from Web Dynpro are documented at this tutorial: https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD5_BAPI.htm
>
> We have also developed a dynpro application in which
> we would like to fetch the data from SAP and then
> displaying the data on the User Interface.
>
> We are unable to fetch the data from the SAP system.
>
>
> What steps needs to be carried out to fetch the data
> from SAP?
If you mean a Web Dynpro application, the tutorial might be helpful.
>
> Do we require Exchange infrastructure for the same.
No. Not on this "level".
>
> Also can anybody please tell me when would the full
> fledged version of WAS640 be available?
>
Synchronized NetWeaver '04 rollout (AFAIK) is October 2004. This includes the (first) production version of the WAS 6.40.
> Pradeep
Regards
Stefan

Post install steps for 11i on XP

Please advise on post install steps after 11i installtion on XP based OS/
ALso what are the steps/services to be completed before trying to login into Apps
Thx much

as such nothing is required as a POST INSTALL on XP and not even a "Restart" sounds strange but this is how simple it is to install on Windows.
anyways... there r two ways to log on to Apps.. one is as mentioned by using the http://........ stuff where u use /pls/ to run the apps. Sometimes (more often) it doesn;t work well wtih XP and therefore the alternative is to runt he servlet instead.
this is how it is:
http://host.domain.com:8002/dev60cgi/ifcgi60
I am considring that u didn;t change the default port assignments. the above shud prompt u to download n install "jinitiator" which is Oracle's JVM (required). Install it and u shud be able to see the logon screen.
Use "sysadmin/sysadmin" or "operations/welcome" as deafult "username/password" combination.
HTH.
Rajeev.

Visual Composer 7.0 Setup/Configuration (with NW2004s SP7)

Hi all,
I've installed a NW2004s Portal with SP7. From my understanding, the SCA-files for VC are included in the installation/Support Package (I saw several VC*** files in SDM).
But I can't start/access Visual Composer in my browser.
I tried a URL like that: http://myserver.domain.com/vcserver
I got an error from WebAS: "The requested resource does not exist." (Errorpage 404) Besides that I added two roles roles in portal to my user: GUIMRole and VCRole.
So my questions are:
- Do I have to install something else, like with VC 6.0 on the server, to use the VC? And if, where can I get it?
(Note: I had installed the old release on that server before, so I already have MS SQL Server and MS XML Parser and the Adobe Software.)
- Does anybody know which installationsteps/configurationsteps I'm missing?
- Are there any installationguides available for release 7.0, cause I couldn't find some in servicemarketplace and SAP-Help?
(I saw the post from Siddharth J Bhatt "Visual Composer 7.0 installation" but unfortunatelly that didn't help me.)
Thank you in advance for any tips / hints.
Kind regards,
Annike

Installing VC 7.0
*I myself have only done a dry run for this*
The user would need to download all of those files. Make sure to download all the files available..So, every version for each file. The reason JSPM will only install the most current version, and the user doesn't have to worry about matching files with versions etc etc.
1. Download all the files.
2. Place them in the EPS inbox.
3. Log into JSPM using SDM password.
4. Select New Deployment or Business Package.
5. The other options will not work, i.e. the files will not show up in the next window.
6. Makesure that the version is the most latest/current.
7. Proceed with install.
This is essentially a cheat sheet for installing those components..makesure that you install all of them at the same time.
Also, make sure that your Support Pack level is the most recent (SP 7 should work)
Hopefully this works.
Imran

Pre/Post install checklist for EBS 12.1.1 & OEL 5 update4 ?

Can someone tell me about post installation activities/checks after having finished installation of Oracle Linux 5 update 4 x86 64-bit and those before I start installing EBS 12.1.1

Pl see these MOS Docs
Oracle Applications Release Notes, Release 12.1.1 [ID 798258.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
HTH
Srini

Install configuration for Crystal Reports Viewer 2011

Hi,
Is there any way to configure the defaults for Crystal Reports Viewer 2011 as part of the installation routine?
Specifically we would like to:
1. Switch off the attempt (on launch) to make an internet connection for community resources
2. Hide the side bar unless the user actually goes into the view menu to turn it on.
There's various reasons for this, but mostly it's that to get an internet connection the application has to go through the proxy server - we would rather that sort of activity was instigated by the end user on demand, not an application automatically, not least in this case because the license agreement window seems to be set to force itself to the 'front', which covers the proxy server prompt, so we can't write a script to provide automatic authentication without user intervention. It would be far better if there was a way to simply switch off this feature - and at the same time set the default 'view' settings to hide the side bar in the first place.

Hi,
Do you mean the Standalone Crystal Reports Viewer 2008: http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/viewer/index.epx
If you do then you can perform a slient install by following the instructions from the release notes:
http://help.sap.com/businessobject/product_guides/crv2008/en/xi3-1_crviewer_release_en.pdf
Those notes are provided from this webpage:
http://help.sap.com/content/bobj/bobj/index.htm

Post Install steps for opatch 9218789 while upgrd DB from 10g to 11.2.0.1

Hi,
I am little bit confused with patch application steps of opatch 9218789 , while upgrading my db from 10g to 11.2.0.1
I have setup my new 11g ORACLE_HOME , created old nls directory , now applying the opatches mentioned in the doc Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.1) [ID 1265232.1].
Now while applying the patch 9218789 as a prerequisite steps it says to drop the objects in MGDSYS schema by running catnomgdidcode.sql. i had run that and applied the opatch.
Now as part of the post installation steps it says to recreate the objects using sqls as below.
Load the following package in CTXSYS schema:
SQL> @?/ctx/admin/dr0ddl.plb
Load the following packages into the database after connecting as SYSDBA:
cd $ORACLE_HOME/rdbms/admin
SQL> exec dbms_metadata_util.load_stylesheets;
SQL> @?/rdbms/admin/catnomtt.sql
SQL> @?/rdbms/admin/catnomta.sql
SQL> @?/rdbms/admin/dbmsmeta.sql
now my question is from which oracle home i have to run these scripts from. 11g or 10g.
Request your help on this.

Hi srini ,
thanks for your reply , but when i run the scripts from 11g home then packages are been created with compilation errors can i ignore those and go head with upgradation.
Thanks.
Puneeth.

10g start at boot post install configure?

Hello,
My sys admin installed 10g but failed to set it up to run at boot time.
Can someone point me to a location that gives command line instructions on how to do this? I don't think I can re-run the installer without hosing the current install.
I am running RHEL AS 3.0
Thanks!!

Hi,
The crs_stat -p <resource_name> command ,
provides you with list of values with which the resource is managed. In the below example, you can observe that there is a parameter called AUTO_START which indicates the action that clusterware shoud perform when the clusterware is started(whatever be it, either a node reboot or a crs reboot)
NAME=ora.XXXXXXXXX
TYPE=application
ACTION_SCRIPT=/opt/oracle/product/10.2.0.4.0_RAC/bin/racgwrap
ACTIVE_PLACEMENT=0
AUTO_START=1 --------------------> 1 indicates that CRS auto starts the resource, value "restore" indicates tht crs has to put the resurce back in the state what it was before the crs reboot. (http://docs.oracle.com/cd/B28359_01/rac.111/b28255/crschp.htm......has a detailed explanation on this )
CHECK_INTERVAL=600
DESCRIPTION=CRS application for Instance
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
HOSTING_MEMBERS=<server_name>
OPTIONAL_RESOURCES=
PLACEMENT=restricted
REQUIRED_RESOURCES=ora.XXXXXXXXXXXX
RESTART_ATTEMPTS=5
SCRIPT_TIMEOUT=600
START_TIMEOUT=0
STOP_TIMEOUT=0
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=

Post Install steps for R12.1.1

Hi,
I have successfully installed R12.1.1 in OEL4U5.
are there any steps to be done after installing R12.1.1 like should i need to re-compile packages, forms and reports etc.. if yes, what are the steps?
(or)
do i need to apply any Patches ater installing 12.1.1. if so, what are they?
regards,
Charan.

Hi,
are there any steps to be done after installing R12.1.1 like should i need to re-compile packages, forms and reports etc.. if yes, what are the steps?No steps are required after installing R12 (you do not need to compile any object).
do i need to apply any Patches ater installing 12.1.1. if so, what are they?Login to Metalink, and navigate to "Patches & Updates" tab, click on "Recommended Patches Oracle eBusiness Suite R12" and "Quick Links to: Latest Patchsets, Mini Packs and Maintenance Packs".
Regards,
Hussein

Issue with reinstallation of WSUS, Post install config fails

Hi
I am trying to reinstall WSUS role. Steps followed
1. Uninstallation of WSUS role and windows internal database, restarted the machine
2. Delete the Data file from Windows\WID folder
3. Deleted the update service registry form registries
4. Deleted WSUS administration site for IIS.
5. Deleted the files from Program files\update services.( Retained WSUSutil in sub folder tools as this was not coming up with installation).
6. Restarted the machine.
7. Installed WSUS - Successful.
8. Tried to run the post install configuration from console.. It errored out.
9. Executed the command "wsusutil postinstall CONTENT_DIR=<<Folder path on WSUS server>>
10. It erred out and the content of the error log is as below.
2015-02-03 23:06:07 Starting service W3SVC
2015-02-03 23:06:07 Configuring IIS...
2015-02-03 23:06:07 Start: ConfigureWebsite
2015-02-03 23:06:07 Configuring website on port 8530
2015-02-03 23:06:08 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
   at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
   at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
   at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
   at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
   at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
   at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
   at Microsoft.UpdateServices.Administration.PostInstall.Run()
   at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Any pointers on how to resolve this issue would be of great help. I can not uninstall IIS on this server as this is acting as only distribution point for my SCCM Setup.
Regards
Leela

Hi ,
Refer to below steps for clean uninstallation of WSUS.
Workaround 1: To uninstall WSUS roles and features using Windows PowerShell
In PowerShell, review features installed by calling: Get-WindowsFeature UpdateServices*
To remove features, call: Uninstall-WindowsFeature <featureName>
Workaround 2: To uninstall WSUS roles and features using the Server Manager Console
In Server Manager, launch Remove Roles and Features Wizard (RRW), unselect items to be uninstalled, and complete the Wizard:
In Server Roles tab unselect ‘Windows Server Update Services’ option
In Features tab unselect ‘Remote Server Administration Tools -> Role Administration Tools -> Windows Server Update Services Tools’ option
We recommend restarting the server to ensure that all WSUS components are removed. After uninstalling WSUS roles and features, you may reinstall the WSUS roles and features
And try to reinstall. It worked for me.
Regards,
Arjun

10g post install mail configs

Hello
What post install configurations need performed in order to send mail? I am able to send mail to the mail domain I configured in OCS. I cannot send mail to any other mail servers. The error i get is:
The server rejected the following recipient(s):
[email protected]
Please correct the error and try again.
TIA.

I feel silly not being able to get this to work, but I've done the following and it still does not allow me to send mail from computers using clients other than the portal/webmail:
Went to EM on the apps tier at: apphost:1156/
Clicked on the "Administration" column icon for Mail Application
Clicked Policy, Incoming mail
Went to Trust and added:
subnet to Client IP addresses
domains to Client Domains
my domain to Sender Domains w/ MTA auth off
"*" to sender domains w/ MTA auth on
Made sure to save settings. Restarted the Mail Application.
All I am trying to accomplish is to allow any computer to relay mail through this SMTP server as long as the user is authorized/logged in.
Am I doing this in the wrong place? Could someone offer some details as to where/what I should be changing to get this to work?
Thanks in advance
Message was edited by:
cblack

Post Instalation Configuration for NW2004s SP7

Similar Messages

Maybe you are looking for