Posting Customer Payment Term Discount Separately

Hello Gurus,
I have configured the system for the Customer Payment Terms in SAP but I am having hard time showing that correctly in FBL5N.
For Example:
Invoice Value $100
Payment Term 2% Discount
Customer Pays on time $98
In FBL5N main display screen, I see the customer account after clearing as follows:
Invoice Value $100 (Clear)
Incoming Payment $100- (Clear)
To see the discount and actual cash posted to the right accounts, I need to drill down in the Incoming Payment Document Entry to see the following information:
40 Payment Discount $2
40 Actual Cash Received $98
15 Customer Invoice $100
Can I see the above posting on the main screen of FBL5N without using F-32 (Clear Customer) so that I could see the actual payment discount and actual cash paid by the customer?
Thank You
Salman Ahmed

Hi salman
With the help of ABAPER, Activate BTE 1650 and add a new column named discount in the FBL5N report.
Give the logic for the same to fetch the amount of discount in the said added column. Also, if the amount of receipt is also required, Column for actual amount received can also be added.
Through this you can get both the amount received and discount in the FBL5N report.
Regards
Nitesh

Similar Messages

Change of Customer Payment Term

Hi Gurus,
We are planning to change the payment term of our customer accounts this October.
For example:
Customer A
Payment term last September is payable in 20 days.
October 10- payment term was changed to 10 days
Kindly advise if the postings that were already made from the previous months will be affected if we change the payment term of that customer? Or will it only affect the postings that will be made after the change in payment term was executed. My worry is that the computation of net due date and amount will be affected if we change the terms of payment.
Thanks,
Ellicec

Hi:
Payment terms are copied into Sale order from payment terms maintained customer master data at sale organization level..Whatever you give in their is copied to sale order and is taken to billing document and once document is posted it starts appearing in posting document line item in FI...Baseline date calculates the aging of open items standing in customer ledger ...If you change the customer payment term then there is no issue..its a normal business process to do so...It will not affect already existing data ....Invoice posted with new payment term will have their own aging in ledger..Hence you can carry on with their change, From control point of view just make sure that none should be allowed to payment term or base line date in a posted document. This can be prevented using document change rules in OB32...I hope it will help you.
Regards

Sales order block for MRP run when the Customer payment terms is in Advance

My client needs to block some sales order for MRP which customer payment term is advance. But it should be based on the customer payments terms (In case of Advance). After getting his advance amount, we would be release it and it also be consider for MRP.
Option 1.Status profile this concept is will controlled by sales document controls VOV8 not by customer's payment term Advance
Option 2: In CMR sales area Billing Document tab by using payment guarantee procedure and in VOV8 in billing tab Payment guaramtee procedure by using this setting , i am getting a pop up message" No Finanical document assigned" in sales order when u try to save. Now sales order is blocked for delivery but not MRP run.
i am to ask the abaper to develop "here in the information box we will maintained required text say example u201C customeru2019s Payment term is in advance please check the reason for rejection number u201Csay ex: 13u201D: advance " after this is happen go to change mode of sales order put reason for rejecation" now MRP run will not generate the requirement for the sales order.
for Undo these this flow :
Va02 : remove the reason for rejection keep it in Blank
VKM3 : release the sales order.
Options 3: Development
Kindly suggest me the second options is only alternative for solving this issue but really i m not used specific feilds to solving this issue.

Cleint is not using the field in CMR Payment granatee , i gone for user-exit and closed this issue

Only Customized payment terms in selection list

Dear all,
What are settings/customization reqd. for only customized payment terms to appear on selection list in any of
the purchasing documents ?

Hi
only customized payment terms in purchasing documents? You can user personall list option in F4 help in payment terms field.
There is no sutomization or settings for this.
Regards
Antony

Posting customer payment advice with discount

Hello - We are posting a customer payment advice that contains a cash discount that is outside the payment terms. However we still want to accept the discount. But when we pocess the payment advice via F-28 the discount is not taken from the payment advice (i.e. the discount field is blank) when we process the open items. Any ideas on how we can populate the discount amount when processing the open item?
Thanks

So you want discount to be automatically populated when the open item is eligibile for discount?
There is automatic account assignment for this. Goto OBXI- give the gl account and posting key here.
This should take care.

AP Payment terms ( discount ) end on week end

Hi Gurus
I have a situation where payment terms for an invoice falls on Saturday.So when when we run it on following Monday it disallow the discount ( 2% ). We pay manually with 2% discount.How can we resolve this issue of discount date falling on week end ?
Kindly give me some solutions please ?
Thanks
Satya

Hi,
You do not need to create two payment terms. What you require here is proxima payment term.
While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
I hope this functionality is available in the Application Version, you are working on.
Gajendra

Sales order and Billing Should be Block as per Customer Payment Terms

When credit limit exceeded to limits As per their client requirement in sales order level credit check has done and it will save , when they trying to do Delivery it is not possible to proceed. With out changing the credit master record they want to release the sales order for special permission (VKM3)
same why i suggested the client when the payment term days exceeds how to block the customer?
Manual blocking the customer for specific sales area sales order level and billing document level . When the Payment terms exceeded . Infact I have checked with my colloegues Payment terms is transactional specific mainly used for some financial reporting example ageing report here when you look at the customer is not paid before the payment term days . you can go to VD05 block the customer.
this i have suggested , is any automically blocking the customer when the payemnt terms days exceeds ?

Hi
Open item option in OVA8 will consider all the overdue items (irrespective of payment terms).
If the particular line item in FBL5N is falling overdue, it will be considered.
% mentioned there is OD/OS percentage, ie. overdue/outstanding %. ie. if you maintain 50% in the OVA8, if your overdue value is 1000 USD & total outstanding is 2000 USD, so your od/os % is 50%. The moment your OD value increases from 1000 to eg 1200USd, system will set a credit block.
Generally noDays open item can be kept blank
I hope it is clear to you
thanks

Customer payment terms

Hi all,
In our customizing report, client needs to shown in the report payment terms wise, not on total billing doc amount. for this which table i need to use? can anybody help me in this regard?
Raghav

Hi,
To see payment terms wise customer balances go to FBL5N choose change layout select payment terms. And subtotal according to the payment terms. Before be sure you should assign the payment terms to the customer master record.
Hope this is clear, if yes assign points,
Regards,
Sankar

Sales order to be blocked based on customer payment terms and credit limit

Hello Gurus,
We have some requirement of credit management : Client want sales order to blocked based on payment terms if customer doesn't pay previous dues as per the payment terms mentioned customer master ,sales order , irrespective of customer credit limit credit
(i.e Even in the case of credit limit is not exceded for that praticular customer)
Looking for your inputs
Thanks inadvance
Regards
Venkat

Dear Venkata Chalapathi,
Following is the logic for your requirement.
If the check is on the basis of payment terms of pending billing documents alone, then
check DYNAMIC with Reaction C/D and Status 'checked'
Then maintain the same settings against OLDEST OPEN ITEM with Days oldestItem = 0
Now, make a sales order and system will trigger the credit check message (assuming there are uncleared documents )
Ask your abaper to find an Exit/Enhancement in this message spot and you can write a logic to check the
billing documents in BSEG by fetching the document types with 'RV' (assuming we are considering only the billing documents)
and in the VBRK get the billing date and we can get the payment term in vbrk-zterm and its corresponding date in T052-ZTAG1
If the billing date + T052-ZTAG1 value is greater than SYSTEM date , then you have to trigger the credit check message in the sales order. Else allow the sales order.
Check and revert back if there is any doubt/additional requirements.
Thanks & Regards,
Hegal K Charles

Customer payment terms issue

Hi I need one urgent solution
In customer master data the payment terms is znz8 which is due 20th of the following month.
But they want it if we do invoice 11/06/2008(today) the due date shpuld be 11/07/2008.
for that in customer masta we need to change know? is this require TP (transport) Movement from development to quality and then move to prodn?
or directly we can change in production in customer master data? is this done by FICO consultants or SD consultants
if settings to be done where we do the settings for the payment terms?
Kindly dothe needful

Hi,
If the required terms are already configured in the system and are available in Production, then it is just a master data change. You need not transport the same. In production environment, the master data changes are generally done by the business teams. Alternatively, either the FI or SD consultant can do it, but you need to ensure that the terms are updated in both Finance and SD views.
If the required terms are not available, then you need to create the terms and transport them to Production.
Assign Points accordingly.
Thanks,
Madhav Nanduri

Customizing Payment term for vendors

Hi,
I'm looking for customizing related to vendor master Payment term.
Could you please help me ?
Yours truly

Hi,
Create Payment term in OBB8,if payment term has more condition's create each payment term in OBB8 and Assign the child Payment term to main Payment term in OBB9.
Regards,
Varun

Posting invoice & payment terms

Dea all,
User should not be given the option of changing the payment terms when he post the invoice.
As per the client requirment user should not have option of changing the payment terms
kindly advice
with regards
babu

hi,
look here: <a href="http://help.sap.com/saphelp_47x200/helpdata/en/5b/d231e143c611d182b30000e829fbfe/frameset.htm">Creating a Validation</a>
but i think, Barrys solution is the better one!
A.
Message was edited by: Andreas Mann

Posting customer payment at line item level

Hi all ,
Is there any way that we can configure customer payment in lock box to be done at line item level,
what I mean here is if some invoice has three line items then can we configure some BADIs & do some ABAP coding to post at one of the line items?
Please guide

HI Nik,
Not sure of vendor invoice. But we did customer invoice payments at item level. Follow below steps.
1. FIll in all the details in F-28 iitial screen.
2. In additional selections select radio button Others, Press enter.
3. In the popup select document number.
4. Here enter ur accounting doc number.
5. Click on process open items
6. Here u will get all line items. Now click on search and select line item, Neter item number.
7. Now u will get only the line items u want.
8. Now u can do complete or partial payments as per ur req.
Hope it is clear.
Thanks,
Vinod.

Posting customer payment

Hi freinds
here i have two questions that given below
1. how do we post a payment on account when the customer does not have any open items?
2. sometimes we have a partial parepayment or down payment for an order that we want to apply to the account.
i told the client below steps
F-29
F-22
F-39
F-28
But clients want to post down payment or partial payment f-28 they dont want to post f-29. if they post f-28 what are the circustance can happen? kindly explain to me step 1 and 2.
regards
Henry

Hiii..
Create a special G/l Indicator for on account payments & for down payment received.it is not advisable to post on a/c payments through f-28.u should tell the client to post advance recd. & on account payments only through f-29.
Regards,
D RANA

AR table needed for customer payment terms specified by sales areas

Hi Experts,
What table can I use to see the payment terms of specific customers by sales areas? I have tried T052 and TVZBT but it is not possible to view or filter by sales areas and customers in those sales areas.
Any help will be appreciated!
Thanks,
David

Hi,
check the VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
Regards
Pramod

Posting Customer Payment Term Discount Separately

Similar Messages

Maybe you are looking for