Posting Date in FB60

Hi
we have an interface into SAP, which calls FB60 to post vendor invoices. Currently the posting date is defaulted as the current day. This works well until month end where for a few days the new period is opened, and the invoices need to be populated with posting date as first day of the next month.
Is there any BADI/User Exit that can be used with FB60, so we can modify the posting date.
Regards

We are going to pushing this back to the datasource, so they provide the correct date in the interface, rather the bespoking SAP.
Had we done this in SAP I think the BADI would have been our solution.
I agree with you....if it's possible it's always better to solve the problem in the source
Max - out of professional curiousity I couldn't see an enhancement spot at the end of the GET_DEFAULTS routine. I am not a developer, so forgive me if this question is stupid, but would you modify the SAP program and create your own enhancement spot ?
Yes there's no standard enhancement there, so if it was necessary I would create my enhancement spot there.
It's very good chance, I've created several enhancement spot in the past and I had no problems while upgrading.
So it can be good solution, but it should not abuse about it
Max

Similar Messages

  • Change posting date in FB60

    Hi....
    We are trying to change posting date (which is in new Fiscal year 2012)  for an FB60 parked invoice , but following error message is coming
    "Changing of document number or fiscal year not possible here
        Message no. FP041"
    How to fix the error.
    Regards
    Vishnu

    Dear expert
    Once you had pressed enter key and when the posting date is greyed out, if tend to change it press key F12 and click on yes. This would reset the field and you can enter the correct date...                                                                               
    OR
    Try to reset the variant in FB60, go to the FB60 from the menu select edit --> screen variant -->reset screen variant. Or go to SHD0 and give the transaction code and select transaction variant or press F4 to find the variants or you can create your own.
    Regards
       Ajeesh.s

  • Execute report on 'POST' button in fb60.

    Hello,
    Requirement is to execute and show output of a journel voucher report when i post data in fb60, i.e when the 'POST'(save) button is clicked.
    Does this invlove user exit and can anyone guide me how it will be done and how to proceed and what to do ?
    Thanks

    Hi,
    check this enhancement RFEPOS00 .
    Laxman

  • How to show field Posting Date (FB60)

    Hi All...
    I have some problem with my SAP testing,
    when i try to created some testing with AP Invoice transaction FB60 @ SandBox Client 200, i can found field Posting Date.
    but when i try to create testing with FB60 @ SandBox Client 300, i can't found field Posting Date,
    does any body can give me the solution, how to display field Posting Date @ my client 300 ??
    Regards
    Ferry

    Hi,
    There must a screen varient activated for tcode FB60 in yuor 300 clent to suppress the PD field.
    In standard system it will always shown.
    Please check with your ABAPer for the screen varient activated to it or not.
    Thanks,
    Srinu

  • FB60: Posting Date/Currency Field clarify

    Hi,
    I have two doubts in FB60 screen:
    1) Is there any configuration to default the system date as the default posting date or is it defaulted by SAP itself?
    2) How to suppress the 'currency key' field in this screen?
    Thanks
    Suresh

    To defaulted the posting date to sap system date. Go to FB00,  go to the last tab "Cash Jrnl", in the "entry options" segment, marked the Set Posting Date and Document Date to System Date.
    Indicator: Set Posting Date to System Date?
    If you set this indicator, within the cash journal, the default value for the posting date and the document date are always set to the system date.
    If you do not set the indicator, for display periods in the past, the last day of the display period is defaulted for the posting and document date.
    Hope this help.

  • Baseline Date in FB60

    Hi,
    We are using FB60 to create a vendor invoice.
    Normally the ‘BaselineDt’ would default  as per the configuration in payment terms and the baseline date can be changed during the document entry, now my problem is eventhough the default for the baseline date is set as document date in the payment term, the document is not getting defaulted at the time of the document entry some times, the date is posting date.
    Can anyone let me know whether there is any other setting for this default for baseline date or am I missing something in vendor master.
    Thanks
    Suresh

    Have you configured all of your payment terms the same, i.e. to work of the document date or posting date?
    This is an area you should check.
    Remember you are saying sometimes, is that the same vendors or it happens for a vendor once and then not again.
    To me it sounds like a payment term that has been configured to run off the posting date. You should be able to spot this by creating a query on BSIK.

  • Invoice receipt date in FB60 & MIRO

    In FB60 & MIRO, invoice date and posting date are showing up in the basic tab.  In addition to invoice date, would like to see invoice receipt date.  What needs to be done so that this shows up in FB60 and MIRO for data entry?

    Hi
    You need to capture it in Header text or Reference field
    there is no separate field for it
    Regards
    Ajay M

  • PDF Attachment while posting thru MIRO / FB60

    Dear Friends,
    I need your help on the following scenario.
    Requirement:
    we are going to build an interface for invioce postings in SAP using Tcode FB60(Invioce with out PO) and MIRO(with PO).
    Data has to be picked up by the interface from a staging server where each invoice data is available in .dat format.
    Data for posting is from the .dat file. We are going to store that in Z tables and will use for posting.
    But our additional requirement is each invoice will have a PDF document(supporting document for that invoice), it is not the invoice as such, but an additional document.
    While doing the posting in SAP thru FB60/MIRO transaction, the PDF file corresponding to this invoice has to be attached with this posting.
    Problem Areas:
    We know that an attachment can be uploaded thru transaction in FB03 after the posting is done using Object Services.
    1. But our concern is how can they be attached programatically?
    2. Can't we attach the file while doing Posting either thru FB60 or MIRO?
    3. How to extract those PDF files placed in another server and attach during the background job?
    Any help/inputs on this is highly appreciated.
    SAP Version: 4.7 Enterprise edition
    Note: Content of the PDF attachment is not the data for invoice posting, no need to read its contents, it only has to be attached with the posting.
    Regards,
    Simha

    Change in requirement..
    Hence i am closing this thread.
    Regards,
    Simha

  • Regarding problem in posting date after opening new year

    Hi SAP Gururs,
    I have just opened the new fiscal year thrugh OB52 and also made a new number range by copying the previuos year number range thrugh OBH2.
    Now when i m posting the entries for G/l, Customer & vendors, everything is going fine but vendor entry is not posting thrugh fb 60 and error is coming that (Posting date < Entry date) and when i m taking the help the following msg is appearing Message no. /SAPDMC/LSMW_OBJ_080237.
    Please provide help to the above issue. It is urgent.
    Thanks & Regards
    Inder

    Hi Mark,
    Yes I h ave check that the number range is copied for 2008 & also the posting period is opened for 2008 for vendors.
    Also i have posted few entries using t-codes FB50, FB70 & also FB60.
    Only in case of FB60 the entry is posted for 1st April 2008 but not for 2nd April & onwards.
    Please let me know what u meant by last line i.e entry date as posting date. What i have done is that i have try to do the entry by using the same invoice date & posting date i.e 2nd April, 2008. But still the same error is coming.
    Please help to reslove the issue.
    Thanks & Regards
    Inder

  • "Posting Date" field blank by default

    Hi!
    Is there any way, in transactions FB60 and F-43, so that field "Posting Date" is displayed blank whenever the user executes them? By default, this field displays the current date.
    Thank you
    Lucia

    Hi Lucia,
    The SAP standard defaults the value of the posting date automatically and it is not possible to remove this default value in BUDAT.
    However, it may be possible to use a substitution to get your desired result. You can check note 42615 for information purposes.
    Best regards,
    Cintia

  • Default Posting date should not be changed / Field status in FB01

    Dear FI gurus,
    In Transactions like FB01, MIRO, FB60, FB70 posting date is appearing automatically. But this date can be changed by the users. We want that the posting date should be made "Display only". How this can be done. Kindly guide.
    thanks in advance.

    Hello,
    There is slight modification in the above mentioned answer:
    Company code = XXXX
    Check
    Posting Date (BKPF-BUDAT) <> Current Date (SYST-DATUM)
    Otherwise
    Give the message number and E (Error)
    regards

  • Change Posting Date of Parked Invoice on Approval

    Hi,
    I have a scenario where one user creates a parked invoice in FB60 and is routed to another user as a workflow item to release the parked invoice.
    I need to change the posting date according to some business requirements, upon release of the parked invoice by the approving officer. For e.g. if invoice is created in last fiscal year but approved in new fiscal year, the posting date shld be changed to last day of the last fiscal year. and all these needs to be coded somewhere. Which means I can't use the standard SAP config to set posting date to System Date or the original Date entered- as these are not what I want.
    Does anyone know of a user exit, BTE, BAdI to accomplish this? I tried some BAdIs, but the posting date is always being reset to the procedure for setting the posting date in T001-PP_PDATE. and i do not want this.
    Your help is greatly appreciated! Thank you!

    Hi,
    Can you please provide any documentation or any links regarding the Workflow approval process for the parked documents. As you have already dealt with it can you  atleast share the knowledge...
    any help is greatley appreciated...
    thanks

  • Change Posting Date of Parked Invoice on Release

    Hi,
    I have a scenario where one user creates a parked invoice in FB60 and is routed to another user as a workflow item to release the parked invoice.
    I need to change the posting date according to some business requirements, upon release of the parked invoice by the approving officer. For e.g. if invoice is created in last fiscal year but approved in new fiscal year, the posting date shld be changed to last day of the last fiscal year. and all these needs to be coded somewhere. Which means I can't use the standard SAP config to set posting date to System Date or the original Date entered- as these are not what I want.
    Does anyone know of a user exit, BTE, BAdI to accomplish this? I tried some BAdIs, but the posting date is always being reset to the procedure for setting the posting date in T001-PP_PDATE. and i do not want this.
    Your help is greatly appreciated! Thank you!

    hi,
    You have to cancel the Parked invoice and again you have to verify using the new date
    G.Ganesh Kumar

  • Stock on posting date with storagelocation,batch and stock types informatio

    Hi,
    I'm needing a report (similar funtion of MB5B) which must reveal the stock postion (closing balance) of the materials on a particular date alongwith storage loactions, batches and stocktypes (Unres/Q/Blkd).As such MB5B either gives the output either by storage location or by batch, not the combination of both.
    Else provide any possibilty means( Database tables) from where i could arrive these mention outputs.
    I could be able to get the information by collecting the values from MKPF & MSEG tables. But this information only suffice the material movements carried on that particular date.. And i will be not having the closing balance as a whole.
    I even wonder to get any such a kind of information in which i could able to get the stock with stock types(Unres/Q/Blkd).
    Any light on this matter is highly appreciable.
    Regards
    Prasanna

    Hi Amit Bakshi,
    Thanks for the reply..
    I executed the suggested program but i found the same kind of information aslike in MB5B..
    The information all i'm looking is to get the closing balance of the given material with storagelocations, batches and stock types on a given posting date.
    For eg.
    On 15 / 03 / 2011
    Material A
    Batch       Slocation       Stock type               Closing balance Qty.
    A1              S001               Unres.                             50
    A1              S002               Unres                            120
    B1              S001               Quality                             15
    C1              S003               Blocked                            30
    In MB5B i could able to get the values of closing balance either Storage location level or by batch level but is it possible to get the combination of both along with stock types?
    Reg
    Prasanna

  • Stock on posting date GL wise

    dear sir,
    can i have the transaction code for stock on posting date GL wise.
    IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATE

    Hi,
    There is a posting date in MB5B  !!!!!!!!!!!!!!!!!
    The whole point of MB5B is to give you the stock on a posting date.
    The field is called "Selection date".
    Steve B

Maybe you are looking for