Posting date in RFEBKA00 format MT940

Hi,
According to the tests I've done and to the document I've read, it seems that the date rules when importing statements through Transaction FF.5 program RFEBKA00, format SWIFT MT940 unstructured are the following:
- Statement date comes the segment :62F: (example :62F:C090411EUR0,00)
- This date is also the one used as posting and document date for all the accounting documents generated with the integration of the statements.
- The only date that can be driven independently at transaction level - in the segment :61: (example :61:090410C3545,42NMSC) is the value date.
Conclusion : using standard program, it doesn't seem to be possible to drive the posting and document date for each transaction.
I have to need to do it, and I'm looking for a solution.
I've looked the specification of the MT940 format and there is a possibility to manage a "entry date" on 4 positions on the segment :61: just after the regular date (example :61:090410XXXXC3545,42NMSC)
The problem is that when I look at tables such as FEBEP, it seems that the date that can handle my need is the BVDAT, but I've no idea how I can link the entry date in the segment :61: to the BVDAT and then to have this date used as posting and document.
For information, my client have the possibility to send me this entry date anywhere I want in the segments :61: et :86:
Does anybody have any idea?
Thanks.
Maxime

Hi Maxime,
Please could you advise me if you found the solution for the above issue. I am currently facing the same problem.
Thank you.

Similar Messages

To Generate Payroll posting data to FI in XSD format in a server location

Hi Experts,
I have a requirement where i need to generate the payroll posting data in XSD format. The sender system is using ECC5.0 and receiver system is using ECC6.0 . I thought of using the ALE scenario and i have know idea how to create an XSD file in a ALE IDOC scenario. your help is much appreciated.
Thanks
Vishnu.

Hi Karan,
I got the error message "Run PP 0000000123 cannot be deleted" when I was trying to delete posted Run number.
Is it any way to delete those posted Run numbers (payroll posting numbers) in table PCALAC? The data was copied to development server last time.
Thanks.

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?
My ideal date format would be / 28, Oct, 2015
can anyone help? I'm not sure I can manipulate the {tag_postdate}

You can use something like this in the post or post list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

While creating miro error message posting date 009 2011is not open

sir
while creating miro the error message is not open open for the posting date 009 2011

Hi,
The date format you have mentioned 009 2011 won't be supported by SAP system. Please enter it in correct format. If the format is OK an not working means MM posting periods are not open for this month this error will come.In MMPV give company code and specify the period to close and save.Again go to same transaction open the period for this month. I hope this will resolve your issue. Thanking you.
Edited by: Padmasri Garapati on Sep 16, 2011 6:58 AM

Unable to create a billing document , have to change the posting date

Dear All,
                  I have performed the following steps:
                 1. I have created Customer
                 2. Created a material.
                 3. Linked the customer to the material
                 4. Post initial stock for the material.
                 5. Create a Sales/Order.
                 6. Displayed the sales order and recorded the scheduled delivery date.
                 7. Created the delivery for the sales order.
                 8. Transfer the stock from the warehouse management
                 9. And update the order.
While updating the order I selected post goods issue and it would not go ahead because the posting date is not there in the posting period. Where do I change the posting date. I could not find it anywhere. I did not enter the date anywhere.
Thank you,
Sandhya

Hello Sandhya
Here is how MMPV works.
Lets say I am at the end of the May month 05.31.2009 so lets say period corrresponding to this is 05/2009.
Now if you want to post data in June perios 06/2009 should be opened.
Here is what I will do in MMPV
Enter my company code
Instead of using periods I will use date which will be 06/01/2009 (mm/dd/yy format in my example)
Check radio button check and close period
Click on remaining checkboxes.
Execute
The effect of this will be that the previous periods will be closed and June will be opened.
In your case since no one has opened periods after 2006 so may be you will have to repeat this step for each month until you reach current period if that is the one in which you want to post goods issue.
Thanks
Vikas

Display items which doesn't have any posting data in report painter

I made some reports by report painter. The problem is that when I run these reports, they can't display the items which doesn't have any posting data. But my customers want to display all items whatever it has been posted or not , can you give me the solution?
BTW, when I made Reports by using Drilldown report, it display all items
Thanks and best regards!

In the change report screen in GRR2 go to menu
Formating--> report layout
There in the rows tab select the radio button, Print Zero rows
and in the columns tab select Print Zero columns radio button,
hope this should solve the problem
Thanks
Naveen

FMS for Udf based on Posting Date + 4 weeks and +4 weeks excluding weekends

Hello,
Requirement 1
Have made a udf in the Sales Order Header as Manfacture Drawing Rel Date U_FDRDT in which I want that if a Sales Order posting date is 15/12/2010 then this udf should automatically update with the + 4 weeks date i.e 14/01/2011
Requirement 2
Another UDF is also made as U_FRDWDT in which I want that if the Sales Order posting date is 15/12/2010 then this udf should automatically update + 4 weeks EXCLUDING Fridays and Saturdays which is there in the 4 weeks hence the result should be e.g 27/01/2010 which is excluding Fridays and Saturdays.The requirement is as such that Friday and Saturday are holidays for the company and the client wants to have this field updated on + 4 weeks basis but it should not consider Friday and Saturday as its holiday.
Also note in SAP base setup Holiday Master Weekend is set from Friday to Saturday. Will this help in any way of updating the field or through formated search.
Kindly advise what best solution can be given
Regards,
Soni

Hi,
One question per thread. This is forum rule.
Here is FMS for the 1st one:
SELECT DateAdd(WW,4,$[ORDR.DocDate\])
Please post another for the 2nd.
Thanks,
Gordon

GR posting date is being considered as Shelf life expiry date

Following settings made in material master:
In Purchasing view: Batch management check box ticked.
In Plant data / stor.1 view: (Shelf life data): Max storage period is 1, Time unit: YR
Min remaining shelf life:1, Total Shelf life: 365, Period Ind for SLED: D
Following data entered in GR:
Document date: 10.03.2011, Posting date:10.03.2011
In batch management tab of GR: Date of Manufacturing is :01.12.2010, SLED/BBD is appearing as 01.12.2011
While taking shelf life report (on 12.03.2011) for the said material following output is displayed:
Remaining shelf life SLED / BBD
-2 days 10.03.2011
In batch display (MSC3N) Shelf life exp. date is appearing as 10.03.2011 where as in GR document it is showing as 01.12.2011.
Kindly help where is the problem.
regards,

Hi,
It is interesting.
I understood the problem but for getting solution, you have to get ABAPeru2019s help.
In calculation in report, the report date 12.03.2011(DD.MM.YYYY) is taken by system as 03.12.2011(DD.MM.YYYY) and SLED is as per GR document 01.12.2011(DD.MM.YYYY). So 1-3= -2 days. Now, for calculating SLED date, system is deducting 2 days (or you can say adding -2) in report date 12.03.2011 (DD.MM.YYYY). So this is 10.03.2011.
So in batch display (MSC3N), it is showing calculated date 10.03.2011.
Please explain it to ABAPer & debug it, you will get solution.
Before that try one thing. Check your user profile for date format. If it is MM.DD.YYYY, change it to DD.MM.YYYY, or vice versa. Then take report again , also check in MSC3N.
BR.

How to consume the webservice if it returns the data in dataset format

Dear All,
We have a requirement to consume webservice created in .NET platform. In that webservice they are returning data in dataset format. In this case i am not able to create a proxy. It is showing the following information.
Cannot generate proxy (object schema mis
WSDL, see long text)
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://tempuri.org/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
<s:import namespace="http://www.w3.org/2001/XMLSchema" />
- <s:element name="getTaskEffort">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="SPRProjectId" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="getTaskEffortResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="getTaskEffortResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="getTaskEffortSoapIn">
<wsdl:part name="parameters" element="tns:getTaskEffort" />
</wsdl:message>
- <wsdl:message name="getTaskEffortSoapOut">
<wsdl:part name="parameters" element="tns:getTaskEffortResponse" />
</wsdl:message>
- <wsdl:portType name="OntimeWSSoap">
- <wsdl:operation name="getTaskEffort">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/">This method.</documentation>
<wsdl:input message="tns:getTaskEffortSoapIn" />
<wsdl:output message="tns:getTaskEffortSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="OntimeWSSoap" type="tns:OntimeWSSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <wsdl:operation name="getTaskEffort">
<soap:operation soapAction="http://tempuri.org/getTaskEffort" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="OntimeWS">
<documentation xmlns="http://schemas.xmlsoap.org/wsdl/" />
- <wsdl:port name="OntimeWSSoap" binding="tns:OntimeWSSoap">
<soap:address location="http://hts-pcs-0808/OntimeData/Ontime.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
I tried to consume webservice http://student.ohecampus.com/projects/group95/stud17/assignment7/validateEmail.asmx, which will return the data in boolean format. In this case, i am able to create a proxy and it is working fine. Can anyone help me out.
Thanks in advance.
Regards,
Karthick

Dear Raja,
I checked with webservice owner who created the webservice. They are telling that there is no problem in XML file which they gave. The webservice they provided is consumed in many application and it is working fine. When in SAP, i tried to create a proxy it is showing the in information which i mentioned in earlier posted forum message.
Kindly advice.
Regards,
Karthick

Best option to transmit CSV file as POST data to remote site

I'm quite new to the SAP scene and am tasked with getting some data out of our database and up to a third party web application.
Their API requests the data be formatted as a CSV file and uploaded as an HTTP POST attachment (file upload) to their site.
What's my best approach to this?
We have PI, but I just learned about CL_HTTP_CLIENT and am hoping I can do this move directly from the ABAP environment but am unsure of the sorts of technicalities involved with either of these options.
Can I setup a "service" in PI that simply posts data to a URL (as opposed to sending a SOAP request)?
What sort of setup do I need to do to get CL_HTTP_CLIENT to talk to the remote site? I've tested with HTTP_POST and get an SSL error even when posting to a non-ssl url (http).

public
void Save(IPropertyBag
propertyBag, bool clearDirty,
bool saveAllProperties)
object val2 = (object)_event;
propertyBag.Write("Event",
ref val2);
object val3 = (object)_fullload;
propertyBag.Write("FullLoad",
ref val3);
object val4 = (object)_sharedsecret;
propertyBag.Write("SharedSecret",
ref val4);
object val5 = (object)_content;
propertyBag.Write("Content",
ref val5);
object val6 = (object)_clienttype;
propertyBag.Write("ClientType",
ref val6);
object val7 = (object)_clientinfo;
propertyBag.Write("ClientInfo",
ref val7);
object val8 = (object)_clientversion;
propertyBag.Write("ClientVersion",
ref val8);
#endregion
#region IComponent
public
IBaseMessage Execute(IPipelineContext
pc, IBaseMessage inmsg)
//Convert Stream to a string
Stream s =
null;
IBaseMessagePart bodyPart = inmsg.BodyPart;
string separator =
new
Guid().ToString();
inmsg.BodyPart.ContentType =
string.Format("multipart/form-data;
boundary={0}", separator);
//inmsg.BodyPart.Charset = string.Format("US-ASCII");
// NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a
//getter and setter for the file adapter. Use GetOriginalDataStream to get data instead.
if (bodyPart !=
null)
s = bodyPart.GetOriginalDataStream();
byte[] bytes =
new
byte[s.Length];
int n = s.Read(bytes, 0, (int)s.Length);
string msg =
new
ASCIIEncoding().GetString(bytes).TrimEnd(null);
//Get boundry value from first line of code
string boundry = msg.Substring(2, msg.IndexOf("\r\n")
- 2);
//Create new start to message with MIME requirements.
msg =
"MIME-Version: 1.0\r\nContent-Type: text/plain; boundary=\"" + boundry +
"\"\r\n" + msg;
//Convert back to stram and set to Data property
inmsg.BodyPart.Data =
new
MemoryStream(Encoding.UTF8.GetBytes(msg));
//reset the position of the stream to zero
inmsg.BodyPart.Data.Position = 0;
return inmsg;
#endregion

Payment Medium Workbench - Group by Posting Date

I have made a medium format with DMEE Engine but it doesn't work as I would like.
I want to have a file with all items group by posting date (subtotals group by posting date, no depends on vendor).
I have 2 leveles:
   - Level 1: Repetition Factor 1          and Key Field FPAYP-FAEDT (Posting Date)
   - Level 2: Repetition Factor 999999 and Key Field FPAYP-DOC2R (Document unique key)
However when I execute F110 transaction it generates different files, WHY?
One file per vendor and posting date, but I WANT TO HAVE A UNIQUE FILE.
Example
                  Vendor          Posting Date          Ammount
ITEM 1:       xx                 15/10/2007            100
ITEM 2:       xx                 15/10/2007            200
ITEM 3:       yy                 15/10/2007            300
ITEM 4:       xx                 21/10/2007            400
ITEM 5:       zz                 21/10/2007            500
Output (wrong)
FILE1:
                 15/10/2007
                 xx     100
                 xx     200
                          300
FILE2:
                 15/10/2007
                 yy     300
                          300
FILE3:
                 21/10/2007
                 xx     400
                          400
FILE4:
                 21/10/2007
                 zz     500
                          500
Output (ok)
FILE1:
                15/10/2007
                 xx     100
                 xx     200
                 yy     300
                          600
                 21/10/2007
                 xx     400
                 zz     500
                          900
Thanks in advanced!

Ok, the problem has been fixed.
The repetition factor for level 1 (Posting Date) should be 9999999 instead of 1, beacuse it refers to input data and it doesn't refer to output data.
We can have differents posting dates in input data, but we want to have a unique line by posting date in output data.
Regards!

Posting date not open

posting period 001 2007 is not open
this is what i get trying to post an inbound mbgmcr idoc
i use posting date 20070115
when i look in trans omsy for my company code 3000
   i see 2007 2 2007 1 2006
how can i open this period up

Hi
I have no MM consultant. I am it.
So
I actually think it is the format i am using
in transaction omsy i see 3000 2007   3   2007 2
so in we19 for processing inbound mbgmcr goods movement i am trying to use a posting date of 20070215
i have tried lots of combinations but it says
posting only possible in periods 2007/03 and 2007/02 in cc 3000
so what format combination should i use in the posting date in we19
thank you so much

Posting date = Value date does not work

hi,
   this is the problem given by them,
symptom:
When the parameter 'Posting date is value date' is active, the posting date of all movements of a bank statement is the bank statement date and not the value date of the individual movements of the bank statement.
other terms:
RFEBBE00,CODA,Belgian Bank statement,PAR_VALD,FEBPDO-BEVALD,FEBBEVALD
Reason & Prerequisites:
The program converts the belgian bank statement format to the Multicash format.The multicash format uses the bank statement date as the posting date.
I want to know how the logic is done so that we will get the posting date = value date and in which user exit is it written?
Plz help me.
Regards,
Shalini

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

Aging Detail in PLD and Posting Date

Anyone,
I try to add a new column in the default PLD for Vendor Lialibilities Aging- detail. the Posting date since not showing or it show as repeated data. anyone can help ? there is now variable found, or the variable sometime didnot show the actual one.

jimmy
thanks you with all the helpful note, i am not here to find information on how the product could be comparable with other but to solve the issue of the PLD which have given us the issue of unable to run and read report from the standard point of view, such as comma Vendor Aging report which could not show posting date (from AP invoice). I am here to help the company to max the product value even they had agree to use the product before i was with the company. I hope you can be helpful and share with me what is the actual system variable or how to read the actual variable from the PLD after the upgrade as number changed.
In fact, when i try to customize the Vendor Statement Report, most of the content show "text" type in format... hope you can understand our need
wei

FMS required for Posting Date + 4 week excluding weekends

Hi,
I have a UDFas U_FRDWDT in which I want that if the Sales Order posting date is 15/12/2010 then this udf should automatically update + 4 weeks EXCLUDING Fridays and Saturdays which is there in the 4 weeks hence the result should be e.g 27/01/2010 which is excluding Fridays and Saturdays.The requirement is as such that Friday and Saturday are holidays for the company and the client wants to have this field updated on + 4 weeks basis but it should not consider Friday and Saturday as its holiday.
Also note in SAP base setup Holiday Master Weekend is set from Friday to Saturday. Will this help in any way of updating the field or through formated search.
Kindly advise what best solution can be given
Regards,
Soni

Hi Gordon,
I used this formatted search and seeing some discripencies as if lets asume the Sales Order Posting Date is 15/12/2010 then 4 weeks should come in the udf means excluding friday and saturday and the date which is coming as per fms is 12/01/2011 but i guess the fms should show 25/01/2010 which is 4 weeks ( no of days 30 ) excluding friday and saturday. I think your fms is just brining 22 working days and then its showing 12/01/2010.
I want the fms to consider friday and saturday as holiday and then give me 4 weeks.
I hope i am clear to my requirement and able to make you understand.
Regards,
Soni

Posting date in RFEBKA00 format MT940

Similar Messages

Maybe you are looking for