Posting from Inteface Screen

Hi Experts...
  I am using a interface screen for posting Purchase order....while i give post the purchase orders has been created but at the time of posting if i minimize the SAP application and open it after some time the posting is not happened...kindly guide me with this
regards
Pradeep

Hi Pradeep,
What do you mean with interface screen ?
Does your application use the UI API or the DI API, or do you interact with the B1 client in some other way ?
Regards,
Johan

Similar Messages

  • Drag and Drop from a screen device (:0.0) to another (:0.1)

    Hello,
    Working with JDK 1.4 I have used the drag and drop in order to drag objects from a JFrame displayed in the logical screen :0.0 to another one, working in the same JVM, but displayed in the logical screen :0.1. This work fine.
    Now, I'm usin the JDK 1.5. With the same code, the drag operation does not work. During the drag operation, I can not move the mouse from one screen to another. The mouse is "blocked" in the source logical screen. The same code works with the JDK1.4 ? I have searched in the forum and I don't find any post on that subject ?
    The drag and drop is not compliant with the JDk 1.4 ? What can I do to resolve this problem ?
    Thanks you for yours answers !!
    Bruno

    I have change my drag and drop implementation. The old one uses the DragGestureListener. Now, I just use the TransfertHandler.
    The result in exactly the same : When the mouse reach the screen border, you can not move it to the other screen...
    Can someone try whith its application ?
    Have someone have a solution.... It is very important for my project.
    Thanks a lot !
    Bruno

  • Yosemite: How do I get back from full-screen to original window size?

    Okay, so today I used iPhoto for the first time since I reluctantly upgraded to Yosemite on Friday.
    iPhoto is one of the few apps I often take into full-screen mode, and so obviously I noticed today that they've kindly taken away the full-screen arrows in the top right-hand corner of the window in Yosemite.
    Posting a question about that in Support revealed the 'new improved' way to go full-screen, which is to click on the green traffic light in the top left-hand corner of the window.
    Fair enough, but how do I get my iPhoto window back to the size it was before I went full-screen? I tried clicking the green-button again, but that insists on the window being what I call 'maximised', ie. spread across the entire width of my desktop. I want to snap from full-screen back to the window size I had before going full screen.
    The arrows in the top right-hand corner used to do that perfectly well, but they're not there any more so I'm having to resort to laboriously re-sizing my window each time, which is far from ideal.
    Anyone able to advise me please?

    Do we know if it is iPhoto-specific, or do all app windows behave in this way?
    Actually, I suppose I could find that out for myself...

  • I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

    I created an application and in  that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

    Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
    developer.apple.com

  • After updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

    after updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

    At last, the BEST solution!
    In addition to my last post, here is the solution for fixing this problem without syncing your contacts with icloud.
    It takes about 2 minutes and permanently solves the problem so you can start adding and editing your contacts again on IOS 5.1.1!
    Basically you just need to follow these steps from the Settings page:
    Enable Airplane Mode
    Go to iCloud settings
    Turn on Contacts
    Agree to 'Merge Contact'
    Wait for pop up to confim iCloud contacts are on
    Turn off Contacts
    Confirm that you want to Keep your Contact on the iPhone
    Wait for pop up to confim iCloud contacts are off
    Disable Airplane Mode
    Airplane Mode temporarily blocks all phone signal/data to stop your contacts merging with icloud.
    Thanks to Washyman and Drewie77 for that info above! I got it from this post and it worked fine.

  • N95 going from one screen to another

    My N95 has started flicking from one screen to another. Is this a programming fault? If I take it to a Nokia shop will it cost me a fortune?

    It sounds like a button is stuck and is making your phone scroll through the menus, and i would think if it is starting with the menu then thats the problem key.
    If the button works, as in when you click it you feel it depress beneath your finger, then there is a possibility that the handset may have got wet and the keypad(underneath the one you see) is corroded and is shorting making the phone think its always being pressed.
    Take it to a Nokia Care Point and get it looked at.
    You can find the nearest NCP to you at the Store Locator
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • How to get IP address from login screen in 10.7 Lion

    Hi All,
    In 10.7 I didn't find any option to get IP address from login screen as used to got in 10.4,10.5,10.6
    Thanks

    Jason,
    is there any way to make that example
    work with release 6.0, preverribly
    with IE5 (native VM)?
    The WHEN-CUSTOM-ITEM-EVENT Trigger
    doesn't seem to fire.
    Thanks
    Anton Weindl
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jason Pepper ([email protected]):
    If you are using web deployed forms then you need to use a javabean to obtain the IP of the local machine - you can get one that does it here..
    http://technet.oracle.com/sample_code/products/forms/listing.htm#pjcexamp
    If you are running client server then there is a utility in d2kwutil.pll that allows you to read the registry and do things like get the IP address. d2kwutil is shipped with your copy of Forms - just have a look for it - the code is self documenting, but there is also a manual you can read too.
    Jason Pepper
    Principal Product Manager
    Enterprise Internet Tools
    Oracle Corp<HR></BLOCKQUOTE>
    null

  • How do I stop the flv video from disappearing from the screen?

    Hello,
    I inserted a flv with skin in captivate. the video plays fine but at the end, the entire video disappears from the screen. i checked the settings so that the video does not fade out. the settings are fine but the video window disappears after the video plays.
    sounds like there is a setting i must correct. which one is that?
    thanks

    This question was posted to multiple forum categories. Please don't cross post.
    For anyone wishing to reply, please reply to the post at this link.
    Cheers... Rick

  • Best way to disconnect from external screen?

    This problem has been on-going, but I am only now asking for help. It has recurred over now 3 reinstallations of 10.5.
    I have an external (Dell) screen, and I run my MBP (Core Duo 2GHz) with the internal screen closed. I have not been able to figure out how to detach the computer from the screen and have it reliably sleep. Instead of sleeping, the MBP goes into some sort of dark-screen state, in which I have to first kill it (holding down the power button for 10 secs.) and then reboot it.
    There are the following connections: sound out, USB out, video out, and power.
    For a while I tried the following: sleep the MBP (from the Apple Menu), unplug each of the wires. Often when I do this, the MBP will wake up when the USB is disconnected, but since the lid is closed, it doesn't really wake up. When I then open the screen, the screen does not light up, and I have to kill and reboot the machine.
    Later I have been trying: unplug the external screen, then unplug the other wires. This seemed to work until today, when I found the same problems.
    I have this feeling that the machine isn't really crashed, but that somehow it is losing touch with its built in screen, since I find that I have to first kill the machine (pushing power button for 10 secs), and then reboot it. But since the built-in screen is dark, I don't know what else to do.
    Obviously, I could always shut down when unplugging the external screen, but I would rather not do this.
    Thoughts?
    A

    I'm unable to recreate the problem on my CD MBP running 10.4.11. It's unclear if you are still unplugging peripherals after you sleep the MBP, but the bottom line is that you shouldn't do that - unplug the USB and the external monitor (audio out/headphone port doesn't matter) +and then+ put the MBP to sleep. Also, note that you should not move the MBP until it is really asleep. Look at the light on the latch - when you select sleep, the light remains solid for a while, then starts pulsating. During the solid light period, the MBP is writing the contents of RAM to the HDD (Safe Sleep); if you move it during this process, you may trigger the sudden motion sensor on the HDD and interrupt sleep (it may still appear to sleep, but when it "wakes" it does so as you describe, with a black screen. (Note that this is the main cause of the "+I put my MBP in the bag and when I took it out it was blazing hot and the screen was dark and it wouldn't wake up, so I had to do a hard reboot+" posts.)
    Hope this helps...

  • Howto remove apple icons from home screen

    Hello!
    How do i remove all icons from home screen (include apples default icons), and just show the application icon for the program that should be used in our warehouse?

    The icons of the homescreen reflect the top line of those located on your main menu.
    So, you will need a different theme that has the features you desire.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT5858 Bug with control centre? - only accessible from lock screen

    I cannot access Control Center from my home screens or within apps, only from the Lock Screen - very annoying if I want to switch my music output for example or use the torch.
    My settings are on for both access from Lock Screen and Access from within Apps.
    Is this a bug or I am doing something wrong?

    Hello Adrian Biffen,
    After reviewing your post, it sounds like you can't access Control Center from inside apps. I would recommend that you read this article, it may be able to help the issue.
    Use Control Center on your iPhone, iPad, and iPod touch - Apple Support
    If you're using an app that uses similar swipe gestures, like Maps or games, you might have to swipe up twice: once to reveal the handle for Control Center, and a second time to reveal Control Center. 
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Is there any way to know the T-code from the screen?

    Hi friemds,
    it s a general question. but I found relavant for posting here.
    I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

    Hi,
    Listed here are the various ways you can find the list of transaction codes and their usage:
    Use transaction SE11 - ABAP Dictionary:
    Fill in the Database table name and click the Display button.
    - TSTC   table will contain all the Tcodes and
    - TSTCT table will contain all the Tcodes with Texts.
    Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
    If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
    or
    Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
    or
    Goto transaction SE93
    There are two ways where you can find the list of transaction codes in SE93.
    Method 1:
    You must be familiar with the starting characters strings for each of the R/3 application modules.
    Assuming you know that most Materials Management transaction codes start with MM.
    In the Fields: Transaction code, type in MM* and press the function key F4
    The list of transaction code starting with MM will be displayed.
    Method 2:
    On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
    If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
    I know a particular T Code and can enter and work on it.  How do I know what is the menu path for that T Code?
    Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path. 
    This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
    Reward if Helpful,
    Regards,
    Archit.

  • I have a posting in my screen that says  close the following application       i  tunes app.  how do i close it      '

    I have a posting on my screen that says close the followinfg application, but I do not know how

    1) If iTunes appears open in the dock, click it and try a traditional quit (Command + Q)
    2) iTunes may be unresponsive, in that case > Mac OS X: How to quit an unresponsive application using Force Quit
    3) Open up Activity Monitor, under "CPU" find the process "iTunes" and force it to quit from there.

  • BDC incorrect when posting from FEBA

    Hi all
    There is a weird behaviour on my system when doing a posting from FEBA. I did a foreground run of the BDC and found that the system is not populating the posting key and account number in the first screen of the posting. i.e. after populating all the header text and the posting date, it jumps straight to the clearing screen. It uses transaction FB05.
    This is happening on my ECC6 system. When doing the same thing in my 4.6c system, the posting key and account is entered and then it will go to the next screen to enter amount before going to the clearing screen.
    I am not sure what is happening and any advice will be awarded with points,
    Thanks.
    Nicholas

    Hello
    Check this out
    Postprocessing Account Statements (Old)
    Prerequisites
    You have explicitly deactivated the new function for postprocessing.
    To do this you call up transaction SM31 with view V_T100C, and set message 001 of class (work area) NEW_FEBA to S or I in the dialog box.
    Features
    You have the following options for postprocessing electronic account statements. You choose these in the bank account import selection screen.
           1.      Post immediately (call transaction).
           2.      Generate batch input
    The type of processing you choose at this point determines what type of postprocessing you can use for the electronic account statement.
    If you selected the Post immediately parameter when importing the account statement, you can use a postprocessing transaction to modify and then post line items that the system has not automatically posted.
    The advantage of this option is that each document number posted as a result of the electronic account statement is saved in bank data storage. You can then determine the status of a posting.
    In the document display of the bank statement that you have posted with posting parameter Post Immediately you can display the line items that relate to the bank statement. To do this choose Services for Object ® Links.
    This is not possible in batch input processing because the statement data is not posted until the sessions are processed. Only then can you obtain information on whether or not a posting was made successfully.
    As a rule, the sessions are first processed in the background. The result is recorded in the batch input log. Transactions not updated remain in the session as defective records. The sessions are then postprocessed in the folder “online”. You can change or delete defective data or add any that was missing. Postprocessing is complete when there are no more defective records in a session.
    Since the system assumes that the postings in a session will eventually be made successfully, it indicates that the line items of the account statement are “posted successfully”.
    An additional advantage is the extra options provided by the postprocessing transaction. You can for example change the postings rules later or edit the payment advice notes (not to be confused with the cash management payment advice notes).
    Electronic Account Statement: Postprocessing Options
    Posting Parameters
    Postprocessing
    Where is data stored if no posting is made?
    Post immediately
    Select Accounting ® Financial Accounting ® Banks ® Input ® Bank Statement ® Postprocess.
    Payment advice database
    Generate batch input
    Incorrect session visible
    process “online”
    Records in the defective batch input session
    The type of postprocessing depends on the posting parameter chosen. This means that it is not possible to use the postprocessing transaction to edit a batch input session which may be defective.

  • IPad Air - swipe to read mail from lock screen doesn't work

    Bought an iPad Air and have a small problem. When I try to swipe to read mail from lock screen, it won't go directly to the mail app itself.  Can anyone help or tell me what the problem is??

    Rather than post a reply to a thread which has been dormant for well over a year please start a new thread detailing your problem and any troublehooting steps you have taken.

Maybe you are looking for