Posting Stock of a Material to Interim Account

Hi,
I want to change the Valuation class of a material.
I have marked all relevant open purchase and production order as Deleted.
However there is some valuated stock existing for the material. I understand that we need to post this to other account. Can someone help me with this process.
Please advise.
Thanks,
Safi

Dear,
If all the stocks are zero and there is no pending orders exists
Option 1:
Goto tcode MMAM - This tcode is for changing the material type and not valuation class.
If you change the material type in MMAM transaction automatically the valuation class will be changed in material master. The system will take the changed material type valuation class which was created for that material type.
Option 2:
Goto tcode MM02 - Accounting View 1 - This tcode is to change the valuation class directly.
Whether you can or cannot change the valuation class directly without changing the material type depends on your own company img settings.
If you want to change the valuation class, there may be because of one or more of the following already exist for the material:
1) Valuated stocks in the current period or in the previous period.
2) Open purchase orders may be there.
3) Production orders which a goods movement has already taken place.
For this first you have to do the following:
If valuated stocks already exist, you can change the valuation class only:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to deleted
By this you can keep the same material type as FG and can assign the proper valuation class.
Regards,
Syed Hussain.

Similar Messages

Re : Reserved stock of raw material in MMBE

HI
While doing make-to-stock production the raw material purchasing from vendor is updated in both unrestricted use and reserved use. after finishing production the unrestricted stock is removed but the reserved stock is not removed.
How to solve this.
Thanls
Mani

Dear,
Reserved stock which is showing in Stock overview or any other stock reports is not the physical stocks. These stocks are created with respect to reservation.
You can't transfer the stock from reserved stock to Unrestricted stock. These reserved stock is just the information availble in Stock overview for the User that this much stock is pending for transfer with respect to reservation. So when you post the stock with respect to reservation then this reserved stock will automatically decreased with that posted stock for the material. You can't transfer that to unrestricted.MB1C will help you in this case with 261 movement.
if set TECO status for your first production order, system will release the reserved stock, it comes to unrestricted stock.
If it is not take place then to run the correction program Go to SE38 give RM06C020 and execute.
Regards,
R.Brahmankar

Inventory posting - stock in transit G/L account

Hello!
We have a unique requirement that we need to post the stock in transit inventory only if the delivery is for one particular customer (sold to party). It is our own company but not on SAP hence, on the books, an inter company transaction. All that is different in this case is the account assignment group of the customer which basically is no help in configuring OMWB (G/L account determination for inventory postings).
The material/plants/movement types are all the same for all transactions, thereby providing us with no 'uniqueness' in this particular transaction to post these stock in transit inventories to a different G/L. I could possibly look at having another movement type if that can help but then again, how will that be valid only for a particular transaction with this customer, I am not sure...
Can anybody provide me with a step by step instructions on how can this be achieved, if it indeed can be? Appreciate any help or posting here if anyone wants any more clarifications on the issue...
Many thanks!

Hi,
As you might already know that the G/L determination happen based on Movt type and the valuation class. in your case as the movt type and the val class are same, you willl not be able to customize to post it to different account
so for this you do 2 ways:
1: you create a new delyvery type and a new movement type so that you can configure the account determination (OMWB).
2. you can influence the account determination by writing a code in the user exit ZXMBCU02 here you can force the system to post it into the different G/L account.
Hope this helps,
Vikrama

BADI or User Exit - Change Material Document(GL/Account) before posting

Hi,
I want to change the MSEG and FI Posting values before the material documet is posted. I am not using the transaction MIGO for the material document posting. The material document which has to be changed was created during the stock adjustment (MI01,MI02,MI07.etc)
The Details I want to change is "GL Account No" based on
storage location. Since I cannot solve this requirement throught customization, I need a way to achive this using
user exits or badis..
Points will be rewared.
Prasath
Edited by: Prasath Kumar R on Jul 24, 2008 1:18 PM
Edited by: Prasath Kumar R on Jul 24, 2008 1:18 PM

Hi ,
What you advised is right, But my customer demands to set the Gl Account at Storage location level.
Is there any way that i can change GL/Account after Posting....????!!!! I hope it also not possible..
Plz advise..abt my assumption.
Regards
Prasath
Dear All,
Please let me know the possiblity of achiveing the above reqmt. Your suggestions will be helpful..
Regards
Prasath
Edited by: Prasath Kumar R on Jul 25, 2008 9:33 AM

Need to extract Post to inspection stock field from material master

Hi Guys,
I need to extract the Post to insp.stock indicator from material master QM view for all FERT materials, i have tried with MARC table but no use. Is there any alternative way to download this from the material master?, kindly help me resolve this.
Thanks
S.Murali

I got it from table QMAT.
Thanks
S.Murali

How do i unblock the G/L account for posting stock ?

I am trying to post stock into WM through MB1C with 561 in Dev sand box.It throws the following error.
G/L account 139999 blocked for posting in company code 2301
How do i unblock the G/L account for posting stock ?

Hi,
Please try FSS0! (I hope this is it...)
(Accounting > Financial accounting > General ledger accounting > Master records > Individual processing > In Company Code)
Csaba

Intial upload of Stock in Transit Material with in plant / Inter company

Hi Friends,
How can we do Intial upload of Stock in Transit Material with in plant / Inter company.
In this case accounting entries has already completed while doing post goods issue (thru SD route) or in 1st step 301 mov. type.
Now the material is in transit. While we go to new system how can do this without hit of aacounting entries.
I tried 565, it Intial upload of stock to Blocked, so accounting entries took place.
Regards
Sai Krishna

Hi,
What I am proposing is:
At this juncture both plants accounting has been done in legacy.
Coming to new system whatever stock we upload that much value only updated in receiving plant. In reality there is difference between legacy & new system in this case. In legacy stock in transit value also added in receiving plant (since we did PGI). If we do stock upload with 565 mov. type .. intial entry to blocked stock i.e value of inventory is matching the legacy.
Actual receiveal of material do transfer posting from blocked stock to unresticted stock.
What is your opinion.
We won't upload the G/L inventory, it will come thru stock upload for kishore infor.
Regards
Sai Krishna

Direct Posting is not possible for G/L accounts

Hi,
Procurement of Consumables thru Maintenance Order(for Breakdown Maintenance):
1. Generation of Purchase Requisition thru maintenance order .
2. Purchase Order from purchase requisition
3. MIGO
4. MIRO
The required consumables are assigned in maintenance order. when converting PR to PO this consumables will automatically flow. According to the valuation class and gl account in material master GL account will also flow automatically.
When converting PR to PO the system throws an error saying that Direct posting is not possible for the G/L account.
I made this GL account as post automatically to ensure that there should be no manual postings for such automatic account determinated GL accounts thru valuation class.
This error can be resolved by removing the tick mark post automatically but is this correct. If it is so then what is the implication of automatic a/c assignment thru valuation class.
<removed_by_moderator>
Thanks in Advance
Regards,
Radhika
When I am trying to use a G/L account for a Consumable (eg: diesel) (that is required for Maintenance) at PO level (through maintenance order) system throws an error sying that Direct posting is not possible for the G/L account.
Also, teh Same G/L

Hi,
Your balance sheet accounts for stock should be defined as for direct postings only. But the P&L accounts should not be marked.
Regards,
Eli

Blocked Stock and Frlag material for Deletion

What is the diffrence between blocked stock and flagging material for deletion.
Thank you

Hi,
Difference between Block stock and flag material for deletion is:
Block stock will only come into picture if your client says that when ever they receive stock, before quality and physical check it should not create any accounting document..So what you will do is, you will receive stock as block stock with mvt 103...Once Check is done you will release your block stock with 104....
Say for an e.g. Vendor has supplied you goods in your premises...Same time you have noticed that goods are damaged o rare of poor quality...So you will post the stock as block stock...So once you post as a block stock, there won't be any accounting documents generated....
Material flad for deletion means: That particluar material can not be used for further procurement..E.g.. may be client has stopped using that material....
Hope it clears
Utsav

Stock transfer from Material to material.......

Hi,
I have a issue, one of my user have created two material instead of one by mistake.
now when he is trying to transfer the stock from one material to another through mb1b/ mvt. 309.
It's giving the error "Stockkeeping units EA and M2 differ".
Obviously both material have the different base unit as EA and M2 and we cann't change those.
So can anybody suggest me how can we transfer the stock from one material to another.
Thanks in advance.......

Hi,
As experts already suggested, the transfer posting is not possible unless the UOM are same on both the material. I am assuming that the material is Raw Material.
Alternatively, if acceptable by your business process owners, you can try to adopt the following 2 options.
1. If the stock is received through MIGO with wrong UOM, then, if the material is not consumed for production, you can reverse the same and re-book the MIGO by making necessary changes in MM02 for the UOM.
2. If the stock is partially consumed, then, you can drop the inventory through Physical Inventory process. As per the accounting entry, the Inventory Loss would be Debited and the Inventory Account would be credited. After that the Material code with wrong UOM can be blocked for transactions (MM06). Later, you can upload the dropped inventory against the correct material code (Qty and value through other goods receipt: movement type 501 or 561). The material will then be displayed in the correct UOM as per your requirement.
Regards
Hari

Stock and consumable material

what is difference between stock and consumable material?
How to cancel an invoice,GR,PO,PR,PIR?
What questions we may expect for interview in MM nad for written test also

Hi,
Answer to your first question form material valuation point of view.
1. Difference between Stock and consumables materials.
Automatic account assignment occurs for a stock material with a material type that allows for inventory management. At posting time, data from the material master record determines which G/L accounts to hit. For automatic account assignment, the account assignment category field is left blank.
For consumable material may or may not have a material master record. A consumable material with a material master record would be for example, a material whose material type does not allow for inventory management (ex: pencils, paper, staplers, etc.). When creating a requisition for one of these consumable materials, you must enter something in the account assignment category field.
When an account assignment category is specified, an additional pop-up window appears for entering the account assignment data.
Regards,
Prashanth Pai

"Check Business Area of the company code" error while posting stock

Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Hali

hi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay

Error in adding stock of the material

Hi
While adding stock to the material using MB1C I am getting an error "Fld selectn for mvmt type 561 / acct 399999 differs for Ext. GA amount in LC (023)"
What can be the solution ??

Option-1: Check Field status group in the create/bank/interest TAB for G/L in FS00 & check its assignments in OBC4 & Field Selection for status of Ext. GA amount in LC like optional/required/suppress
Use OMJJ t.code - 561 mvt - field selection and check additional account assignment (here Ext. GA amount in LC is optional/required/suppress.)
Option-2: Can also run the programme RM07CUFA through SE38 to update.
Regards,

Error during Post Goods Issue of Material in VL02N for STO Purchase Order

I am getting one error message during Post goods issue of Material for STO Purchase order.
I am doing the Post goods issue in T code VL02N
Error is " Account type D is not defined for Document type WL"
What is the settings required to be done.
Thanks,
Shailendra

Please check Plant customer master reconsilation account properly maintained or not in XD03 transaction.

Valuated sales order stock for configured material

Hi All!
I have a small problem : I created a new type of material (OMS2) - a configurable one, managed on quantity and value basis. I work with valuated sales order stock for configurable materials but the account in the purchase requisition is determined by means of event key GBB insted of event key BSX.
Where is my error?
Any idea would be appreciated.
Florina C

Hi
I think you are talking about Special Stock "E"...ie) Sale Order Stock...
If my understanding is correct then,
If you go and see the Table T156....For the
Movement Type: 101,
Special stock Indicator : E,
Qty. Updation Checked,
Val. Updation Checked,
Movement Indicator : Against PO,
Consumption Indicator: Sales Order Stock.....combination....the transaction Event Key....GBB only has been Assigned....these settings you cannot change...
This linkage you can view in OLMW-----> Account Determination -
> Acc. Determination W/O Wizard -
>Account Grouping....also
Reward if useful
Regards
S.Baskaran
Edited by: baskaran srinivasan on Dec 20, 2007 12:18 PM

Posting Stock of a Material to Interim Account

Similar Messages

Maybe you are looking for