Power plug on fatality fps front panel st

I am using the fatality fps with a front panel
now today i tried to unplug the white 4 holes cable (power?) off front panel
the plug is attached and it won't come out no matter how hard i pull
now the plug is locked up half way and and it won't separate
how can I fix this?
Now my computer won't detect soundblaster or front panel
I've already took out the card and reinstall
also reinstalled driver and still not detecting card
Message Edited by tom2 on 07-8-2008 :50 PM

now i know the pci card is working, but the front panel is not functioning
i've reinstalled the card and drivers several times
the front panel's earphone and LineIn 2 does not work at all
Creative Console Launcher does not detect LineIn 2 too
I am using SB X-FI WEB UPDATE 5 & BETA CONSOLE LAUNCHER
what can i do other than replacing the front panel? (i brought it 3~4 years ago and the warranty expired)
Message Edited by tom2 on 07-9-2008 2:08 PM

Similar Messages

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Asus Xonar DGX no rear sound / mic. Front panel sound/mic ok. [SOLVED]

Hi guys,
I have a ASUS Xonar DGX PCI-E GX2.5 sound card since my onboard audio crapped out on my motherboard. I just did a first time install on my desktop and the rear portion of my card refuses to work. If I connect up my speakers to my analog output in the back I don't have any options in my sound manager for the analog output to just be a 2.0 system. I get 4.0, 4.1, 5.0, 5.1. All of which do not work obviously. Also my microphone doesn't work plugged into the actual card. If I plug them into the front panel audio, both the microphone and headphone out work. I did some searching, and it seems like a likely cause has something to do with amixer being multichannel. I tried several commands but wasn't successful in getting the audio to work through the back. Any help would be useful, I'm still trying to learn a lot about Arch while doing all this. Thanks in advance!
Solution. Using Alsamixer in terminal and selecting the analog out as stereo headphones, instead of stereo headphones (fp).
Last edited by 15goudreau (2014-08-04 21:56:36)

Search for vid and pid combination, ergo 13f6:8788 in your case. This should be one of the search terms, vid and pid could be also separated, other search terms could include oxygen, sonar, dgx and so on. Simple google search should turn something up.
Edit: The point is to locate a thread/post where the support for this card was implemented/talked about. It could provide some further insight.
The simplest approach would be to download linux-rt sources from aur with yaourt, modify PKGBUILD, compile and then install.
yaourt -G linux-rt
cd linux-rt
Copy this into PKGBUILD replacing the original:
# Maintainer: Joakim Hernberg <[email protected]>
# Contributor: Ray Rashif <[email protected]>
# Contributor: timbosa <[email protected]>
# Contributor: Tobias Powalowski <[email protected]>
# Contributor: Thomas Baechler <[email protected]>
pkgbase=linux-rt
pkgname=('linux-rt' 'linux-rt-headers' 'linux-rt-docs') # Build realtime patched -rt kernel
#pkgname=linux-custom # Build kernel with a different name
_kernelname=${pkgname#linux}
_basekernel=3.14
_releasever=12
_rtpatchver=rt9
pkgrel=1
_pkgver=${_basekernel}.${_releasever}
pkgver=${_basekernel}.${_releasever}_${_rtpatchver}
arch=('i686' 'x86_64')
url="http://rt.wiki.kernel.org/"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("https://www.kernel.org/pub/linux/kernel/v3.x/linux-${_basekernel}.tar.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${_pkgver}.xz"
"https://www.kernel.org/pub/linux/kernel/projects/rt/${_basekernel}/patch-${_pkgver}-${_rtpatchver}.patch.xz"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
"${pkgname}.preset"
'change-default-console-loglevel.patch'
'0001-Bluetooth-allocate-static-minor-for-vhci.patch'
'0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
'0003-module-remove-MODULE_GENERIC_TABLE.patch'
'0006-genksyms-fix-typeof-handling.patch'
'0007-asus-xonar-dgx.patch')
md5sums=('b621207b3f6ecbb67db18b13258f8ea8'
'89a5af1f3609d0c27e63fea298dd80ed'
'2aa3614e488efa939007a1c428406c30'
'a8126ad28c0a902a575397cacd099db2'
'843119a441c942efc5ec4b73c3c6ced5'
'eb14dcfd80c00852ef81ded6e826826a'
'6623d69fdc936d707990ca060dabd2ce'
'6839ddec74a5300beff1709a81b0e4f3'
'706549e8a05f33f7fc697f28c0ca71d2'
'd23fc66be93ebce698bd7da844789de1'
'16a161979f846b049e90daea907c35dd'
'SKIP')
prepare() {
cd "${srcdir}/linux-${_basekernel}"
# add upstream patch
msg "apply patch-${_pkgver}"
patch -p1 -i "${srcdir}/patch-${_pkgver}"
# add realtime patch
msg "applying patch-${_pkgver}-${_rtpatchver}.patch"
patch -p1 -i "${srcdir}/patch-${_pkgver}-${_rtpatchver}.patch"
# add latest fixes from stable queue, if needed
# http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
msg "change-default-console-loglevel.patch"
patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
# Fix vhci warning in kmod (to restore every kernel maintainer's sanity)
msg "0001-Bluetooth-allocate-static-minor-for-vhci.patch"
patch -p1 -i "${srcdir}/0001-Bluetooth-allocate-static-minor-for-vhci.patch"
# Fix atkbd aliases
msg "0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
msg "0003-module-remove-MODULE_GENERIC_TABLE.patch"
patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
# Fix generation of symbol CRCs
# http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dc53324060f324e8af6867f57bf4891c13c6ef18
msg "0006-genksyms-fix-typeof-handling.patch"
patch -p1 -i "${srcdir}/0006-genksyms-fix-typeof-handling.patch"
msg "0007-asus-xonar-dgx.patch"
patch -p1 -i "${srcdir}/0007-asus-xonar-dgx.patch"
msg "All patches have successfully been applied"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
# if [ "${_kernelname}" != "" ]; then
# sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
# sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
# fi
# set extraversion to pkgrel
#sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# set localversion to pkgrel-rt
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"-${pkgrel}${_kernelname}\"|g" ./.config
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
yes "" | make config >/dev/null
# stop here
# this is useful to configure the kernel
#msg "Stopping build"; return 1
build() {
cd "${srcdir}/linux-${_basekernel}"
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
package_linux-rt() {
pkgdesc="The Linux Kernel and modules (with realtime preemption)."
#groups=('base')
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
# provides=("kernel26${_kernelname}=${pkgver}")
# conflicts=("kernel26${_kernelname}")
# replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgname}.preset")
install=${pkgname}.install
cd "${srcdir}/linux-${_basekernel}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
# _basekernel=${_kernver%%-*}
# _basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgname}"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/${pkgname}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
sed \
-e "1s|'linux.*'|'${pkgname}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgname}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgname}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgname}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--rt}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt}"
echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt}/version"
# Now we call depmod...
depmod -b "$pkgdir" -F System.map "$_kernver"
# move module tree /lib -> /usr/lib
mv "$pkgdir/lib" "$pkgdir/usr"
package_linux-rt-headers() {
pkgdesc="Header files and scripts for building modules for linux kernel (with realtime preemption)."
# provides=("kernel26${_kernelname}-headers=${pkgver}")
# conflicts=("kernel26${_kernelname}-headers")
# replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${pkgdir}/usr/lib/modules/${_kernver}"
ln -sf ../../../src/linux-${_kernver} build
cd "${srcdir}/linux-${_basekernel}"
install -D -m644 Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/src/linux-${_kernver}/.config"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/src/linux-${_kernver}/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}"
cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel/"
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/src/linux-${_kernver}/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core/"
# and...
# http://bugs.archlinux.org/task/11194
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
cp include/config/dvb/*.h "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
# add dvb headers
# in reference to:
# http://bugs.archlinux.org/task/20402
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners"
cp drivers/media/tuners/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/mm"
cp fs/xfs/xfs_sb.h "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p "${pkgdir}"/usr/src/linux-${_kernver}/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/src/linux-${_kernver}/${i}"
done
chown -R root.root "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}/usr/src/linux-${_kernver}" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/src/linux-${_kernver}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
package_linux-rt-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the Linux kernel (with realtime preemption)."
# provides=("kernel26${_kernelname}-docs=${pkgver}")
# conflicts=("kernel26${_kernelname}-docs")
# replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/linux-${_basekernel}"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}"
cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# vim:set ts=8 sts=2 sw=2 et:
Then create the file '0007-asus-xonar-dgx.patch' with the following content:
--- a/sound/pci/oxygen/oxygen.c 2014-08-01 20:45:20.299191180 +0200
+++ b/sound/pci/oxygen/oxygen.c 2014-08-01 20:46:11.179947117 +0200
@@ -105,7 +105,7 @@
{ OXYGEN_PCI_SUBID(0x10b0, 0x0219), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x13f6, 0x0001), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x13f6, 0x0010), .driver_data = MODEL_CMEDIA_REF },
- { OXYGEN_PCI_SUBID(0x13f6, 0x8788), .driver_data = MODEL_CMEDIA_REF },
+ { OXYGEN_PCI_SUBID(0x13f6, 0x8788), .driver_data = MODEL_XONAR_DGX },
{ OXYGEN_PCI_SUBID(0x147a, 0xa017), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF },
/* Asus Xonar DG */
Finally run makepkg, should there be errors try removing the src dir first 'yes|rm -r src', then run makepkg again. Should there still be an error post here.
As for the patch, should there be no real difference there is also MODEL_XONAR_DG, might be worth trying out.
Last edited by emeres (2014-08-01 22:34:05)

MOVED: K8t neo fir front panel sound out?

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=117772.0
Was in the wrong board.

Yes they need to be on if front panel is not connected as mentioned in the manual or you will not have have output at the rear connection. If front panel is connected you should have rear panel output if nothing is plugged in on the front panel output.
The jack acts as a switch, nothing plugged in, output to rear which will be the same as if jumpers were on.

MSI K9A2-CF front panel audio problem

Just rebuilt a computer using the board. Please note, I have not updated the BIOS at all and I am using XP Pro. Anywho, I've tried everything under the sun, so far, aside from previously stated, to get this sucker to work. I have it connected properly, I've installed every audio driver on the motherboard CD. I can't find a setting in the BIOS to turn on front panel audio either. Everything else works fine though. USB's, HD audio connections in the back, etc. The program in windows will detect all inputs except for the front audio in and out.
I'm a bit stumped. Any suggestions?

Quote from: Bas on 17-August-09, 22:22:14
You have to check the wires on the plug, looks like they are wrong or the case-module is broken somewhere.
You have to start checking and measuring with an Ohm-meter.
Remember, neither case front worked. I'm not saying it couldn't be the case, but I'll try to get my hands on an Ohm-meter. Where can I find out what values I'm looking for? I know next to nothing about testing to that extent.
Also, what if it's the motherboard itself? Isn't there somewhere in the bios and/or windows device manager that I can confirm whether or not the device itself is working, or not working, properly?
Thanks for your replies so far.
Mike,
I honestly don't know, but the case only has one audio cable, and the MB only has one audio plug-in for the front panel. I have both drivers installed. The on-board audio plug-in on the rear of the computer works fine. I can get sound, etc, no problem from the rear. Front panel only is not working.

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Using Front Panel Audio with Fatality Professional

I have a query regarding connections on the Titanium Fatality PCIe.
I have an XFi XtremeMusic PCI card and am considering replacing it with the Titanium Fatality XFi card. A couple of reasons, I like the shrouded enclosure, I like the little XFi LED logo, I want to move away from PCI cards in my system.
But one of the main reasons is to allow me to connect my Intel HD Audio connector to the card so I can use the Headphone/Mic socket on my case. So if anyone has these cards can they confirm that they have an Intel HD Audio connector on them. If so does connecting the headphone to the case socket mute the speakers?
Cheers

Well, I don't personally have one, but I was under the impression that every X-Fi had one. I know my X-Fi Fatal1ty (original PCI version) included it, and my Recon3D definitely does.
Plus if you check their shop website for the Titanium Fatal1ty Professional than the specs page lists a 2x 5-pin connector for "Intel HD Audio Compatible Front Panel Header" so it most likely does.
I would assume it would mute the speakers only if your case is fully Azalia compliant. By that, I mean the standard (as dictated by Intel) involves the use of two normally-open switches - one each on the headphone and microphone jack - which are closed as a result of plugging something into them. Some cases have these jacks which means it can detect when you plug something in and respond accordingly, but others use cheaper (we're talking differences in cents - not exactly substantial savings, but when you do it thousands of times over it adds up) switchless jacks and simply report them as always plugged in.
Just remember to set up the X-Fi panels to mute the speakers when you plug headphones in, as well as switch the output to headphone mode. You can actually set those two options separately on X-Fis.

Plug markings on front panel wiring

mother board: msi 845e max
case: msi
os: xp sp3
cpu: p4
hdd: Samsung 40 GB
memory: Hynix 512 mb DDR
I want to confirm that unless the plugs from the front panel are marked + or - , it dosen't matter which you plug them into. The mother board manual does indicate + and -. I am rebuilding this computer adding upgraded parts from a HP with a fried power supply. Unfortunately I first thought to use the HP motherboard and thus removed the msi board from the case. I don't have the manual for the case. I know where all the plugs go but not if their orientation matters. Thanks

For reset and power switches, orientation doesn't matter, as the switch simply shorts the pins when pressed.
Its only the LEDs that must be connected the right way round. And generally as Wonkanoby said, the white lead is (-) and the coloured lead is (+). If the LED is connected the wrong way round it simply won't work, just try it if you're not sure, it won't cause any damage.

Front Panel USB Power

MSI P4M900M2-L, 945GCM5, G31M-F.
Does anyone know how to solve the problem when using Internal card reader + Bluetooth device on this motheroard, the Bluetooth can function normaly but card reader can't, when only disable bluetooth then the card reader can funtion. Both devices are plug in the motherboard JUSB 1 Slot (Front Panel). When plug in a USB Flash Drive and a External Harddisk to the front panel usb at the same time, the USB Flash can work but the Extrnal Harddisk can't.
Any solution for this? Is it the JUSB slot cant produce enough power?
Thank you

The Bluetooth and Card Reader are 2 in 1 device that using a slot in Motherboard (JUSB), after login to windows, the bluetooth can function but when insert flash card the system cannot detect the card but when disable the bluetooth then the system can detect the flash card.
The Front Panel USB problem is when USB Flash Drive and External Harddisk using Front Panel USB slot, only the USB Flash can detect. (With or without card reader also same problem)
These problem seems like lack of power supply from motherboard and only allow 1 device run at the same time, although trying to change Ram, power Supply, Processor but the problem is the same. Customer claim that the card reader can run smoothly in Gigabyte and Intel motherboard, and dont know why these 3 model MSI 7255, 7267, 7345 facing the same problem.
What is the best solution to produce more or stable power or to allow these device run properly?

Web browser plug-in for publishing a front panel

I have a number of automated systems operating through the corporation. Support is becoming an issue. I plan on running an application on a server, the front panel will look like a 'tech support request form'. Accessed through a browser, users on the LAN will access the "form" and log in a support request. On the back end the VI will log the request to a DB and email me to alert me to the issue
Just read in an excerpt of the LTR that to accomplish this the client machines must have:
"To operate remote panels from a browser, you must first have the LabVIEW 6.1 run-time engine and browser plug-in installed on the client machine."
The runtime engine is no problem, but what , and where, is the br
owser plug-in? and will it operate with both/either Netscape / IE?
Lawrence M. David Jr.
Certified LabVIEW Architect
cell: 516.819.9711
http://www.aleconsultants.com
[email protected]

I looked through the source code on the html pages, there is some javascript detection. I'm running Win2k and IE 6 and don't have the 6.1 run-time engine on the machine and get prompted to install it.
If you view source of any of the live experiment pages search for "ftp.ni.com" and that should take you to the right place in the html for the script.
Johnathan's post mentiond that NS is only supported for versions greater than 4.7 so that might be one issue with your current setup. I'm sure there has got to be a way to detect your browser version too and then inform people that if they're using an older version they need to upgrade to view the remote panel. Of course, I said I'm sure it's possible which doesn't mean I know myself ho
w to do it ;-) I have seen it on some sites when functionality isn't available for older versions like NS 3.x
One other thing, depding on how you're going to deploy the application and how much control you have over the machines accessing the pages. If the detection is a javascript based detection then you might want to include a detection to make sure people have javascript turned on in the first place. If you think that would be useful let me know and I'll try and see if I can find something.
I'm waiting to hear back from somebody on the NS issues and to confirm the javascript working for both browsers. I'll let you know as soon as I have more information.
Best of luck,
Kamran - NI

NI DC Power Soft Front Panel Error - 200247

Hello All,
I am having trouble opening the ni DC power soft front panel. The error message I repeatedly am seeing is below:
When I try to run the vi mentioned in the error above, the same error occurs:
How can I go about getting my soft front panel to work? I have been using the DC power API to execute tests over the past week using the example VI's, but am at a point where the soft front panel would be very helpful to my workflow.
I am using the following:
NI PXIe-4139 SMU
NI PXIe-1082 Chassis
NI PXIe-8360 Controller
Windows 7 64bit
Labview 14
MAX 14.5.0f0
DC Power 14.2
I have tried running the soft front panel using clean installs of DC Power 14.1 and 14.2 and see the same error message. I have uninstalled the other modular instrument driver packages on my computer, NI-Fgen and NI-Scope, reinstalled DC Power, and still I see the error message. It could be that I am not uninstalling these software packages 100% correctly (I use the windows add/remove to NI Remove software dialog process....)
I appreciate any help getting this DC Power soft front panel working.
Thank You,
Andrew Goett

Hi Andrew,
Can you possibly give me a MAX technical report for your system? The instructions can be found here. Use Method 1.
Also, can you check which version of niModInst.dll you have on your system? This file can be found here: <Program Files>\IVI Foundation\IVI\Bin\niModInst.dll
Right-click on the file, select Properties, and then click on the Details tab. The information I need is the "Project version" field. See the image below:
In addition to the MAX report, could you send me a ZIP file of the contents of this folder: <Program Files>\National Instruments\Shared\niModInst
I've attached a simple program (NI-ModInst Code.vi) to test if NI-ModInst is failing across the board or if it only is failing to identify NI-DCPower devices. Open the program, select a driver that you have installed on your system, and run the program. The code should tell you the number of devices you have in the system that are associated with that driver, as well as list out the model numbers for those devices. This list will include simulated devices. Test the code with various drivers in your system to see if you get the same error.
Let me know how this works out.

X-Fi Platinum Front panel Power QUESTION

? Hi All, I have X-Fi Platinum. Does the front panel require A power connection. If so what kind of connector do I need? Run from the card to the front panel? Cant find manual on line!? THANKS IN ADVANCE

This requires a four pin floppy power connector. If your case does not have one you can find a molex to floppy adapter very simply on online retailers.

Mic socket wont work on the front panel of fatal

When i connect my headset & mic to the headphone & mic socket on the front panel, the mic dosent seem to work even though if i blow in it i can hear myself thru the headphones a little but if i turn up the mic volume on the front panel it makes a weird loud noise, the sound comes through the headphones ok. Many thanks for any help given.

Have you tried turning on the microphone +20 dB boost?
It's on the plus sign of the recording source ( when set to microphone in the mixer ) in the X-Fi mixer.

Front panel of my Audigy 2 won't w

My front panel on my Audigy 2 won't work. I recently had to replace my motherboard and it won't work since then. It worked fine before. The mixer panel won't even give me the option of Line 2 and Auxilliary in, and my headphone jack won't work either. I don't think they're even getting power, though I'm not sure. I took the optical plug out to see if there was a red light showing, and there wasn't. The inputs and outputs from the back are operational.
I've read other threads on this and none of the solutions there have worked. I've re-connected cables, uninstalled and reinstalled hardware, and software. Still nothing. Only inputs from the back work. I recently had to replace my motherboard. I've tried updating drivers - nothing.
My motherboard is a GIGABYTE GA-K8NSC-939 Socket 939 NVIDIA nForce3 250Gb ATX AMD Motherboard. My processor is AMD Athlon 64 3000+ Venice GHz FSB 52KB L2 Cache Socket 939 Processor. I run Windows XP with both service packs installed (same as with my old motherboard).
Is my card broken?

There should be a light from the optical output as long as there is power to the dri've. Perhaps switch the power cable on that dri've with the cable that goes to your floppy, to see if that helps (in case the cable is faulty). It's possible otherwise that the dri've itself is broken.
Cat

Can't scan using front panel of HP Officejet Pro 8600 Plus

I can't scan using front panel or laptop. I can't find the set up disc that came with the printer that I purchased almost 2 years ago.

Hello @Pierre1 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues scanning. I'd like to help!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Power plug on fatality fps front panel st

Similar Messages

Maybe you are looking for