Power View Created Using Excel Data are not visible in BI Docs
I have created a Excel sheet with data and Then I added a Power View for that data set. I added this Excel Sheet to the Power BI Docs in Office 365 share-point Online. But when I open this uploaded Excel file.
There is only the Datasheet but no pages of Power Views of that data. How can I make this power Views visible in the Excel sheet.
Thanks
Normally, when you open an excel file, using excel online, (not on phone or tablette, just by using your laptop) the report will appear correctly.
I was in your case when i didn't have right access in Power BI in Office 365, so make sure that your account have right access in Power BI in Office 365. (you can talk to the administrator of Office 365 for more information).
Similar Messages
-
Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
I used 30 day trial of Acrobat XI and all the functions work perfectly. But, when I buy the program (either download or disk) my PDF that export to Excel is not working. The excel columns and data are not properly aligned as they should be. The Trial version aligns everything perfectly. What is happening? I use a MAC 10.9.5. But this shouldn't matter because the trial version works perfectly. Can anyone help?
just found out that this is posted in the wrong section.
-
Changes to Excel files are not getting updated
File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Microsoft BI Semantic Model for Power View is missing in data source
Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013
Hi Sanjay,
I resolved the issue.Follow the steps
1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
Deployed to:,if not then deploy that for your web application.
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem -
hi,everybody!
I need to create a plug-in that will use excel data.
But I don't know how to access to excel from the frameMaker plug-in.
Can someone give me any idea?
regard.
erieru103Yes, having multiple languages and fonts in the file could be a cause for having a filter problem. I don't know whether having macros would cause problems, I would guess probably not as I think the filter would just ignore them.
For more troubleshooting, I would suggest starting by making simplified copies of the Excel file, starting with having just a single language in the Excel file (one with Russian, one with Chinese, and so on), to see if you can narrow the problem down to any particular language or font.
In addition, I would look at any special formatting in the file, for example are there columns or rows that have spanned cells or columns, or rows that are divided in some special way, because Excel can format cells in ways that FrameMaker cannot handle, so that could cause the filter to make an error.
And, another possible way to proceed would be to have the Excel file open, copy a few cells to the Windows clipboard, then paste them into FrameMaker. If the cells correctly appear in FrameMaker with the font correctly maintained and the language characteristics are preserved, then that might indicate that the filter is having a problem with the Excel version or with some special formatting in the file, not with the language and font.
SHeila -
List of materials from the excel which are not posted
I have written bdc,
that ware house storage locations should not be allowed.
All the storage locations in the table T320 are ware house storage locations.
so i have written
if not it_data1 is initial.
SELECT * into table iT_320 FROM T320
for all entries in it_data1
where WERKS = it_data1-werks and
LGORT = it_data1-lgort.
endif.
LOOP AT IT_DATA1 .
read table iT_320 INTO wa_320 with key werks = it_data1-werks
lgort = it_data1-lgort.
IF sy-subrc = 0 .
delete it_data1 index sy-tabix.
ENDIF.
endloop.
So its working fine till then.
but i wanted a list of materials from the excel wch are not posted,so tht the user is aware tht some items are not consumed.
How to display that list in bdc.
Please give the code for that.MY EXCEL DATA IS IN IT_DATA1.
LOOP AT IT_DATA1 .
read table iT_320 INTO wa_320 with key werks = it_data1-werks
lgort = it_data1-lgort.
IF sy-subrc = 0 .
delete it_data1 index sy-tabix.
ENDIF.
endloop.
LOOP AT IT_DATA1 .
MOVE-CORRESPONDING IT_DATA1 TO IT_DATA_h.
Collect it_data_h.
ENDLOOP.
Clear it_data_h.
clear : it_data1.
THEN MY BDC IS LIKE THIS.
LOOP AT IT_DATA_H .
perform bdc_dynpro using 'SAPMM07M' '0400'.
perform bdc_field using 'BDC_CURSOR'
'RM07M-WERKS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MKPF-BLDAT' LV_DATE .
perform bdc_field using 'MKPF-BUDAT' LV_DATE.
perform bdc_field using 'RM07M-BWARTWA' '261'.
perform bdc_field using 'RM07M-WERKS' IT_DATA_H-WERKS.
perform bdc_dynpro using 'SAPMM07M' '0421'.
perform bdc_field using 'BDC_CURSOR'
'MSEG-WERKS(03)'.
CLEAR : FLAG1, W_FLAG.
LOOP AT IT_DATA1 WHERE aufnr = it_data_H-aufnr.
W_FLAG = 1.
CONCATENATE 'MSEG-MATNR' '(' W_FLAG ')' INTO W_MATNR_C.
perform bdc_field using W_MATNR_C
IT_DATA1-MATNR.
CLEAR : QTY.
QTY = IT_DATA1-ERFMG.
SHIFT QTY LEFT DELETING LEADING SPACE.
END LOOP.
NOW HOW TO COMPARE THE MATERIALS IN EXCEL AND BDC POSTED.
PLEASE PROVIDE THE CODE FOR THAT AND HOW TO DISPLAY. -
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
Event dates are not bolded by Date Navigator in Outlook 2010
Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support -
BPM worklist app views are not visible in IPM task viewer
Hi,
we upgraded our system from 11.1.1.3.0 to
weblogic 10.3.5.0
SOA 11.1.1.5.0 with BPEL processes
ECM with IPM and UCM 11.1.1.5.0
after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
Thanks a lot in advance for any help
Edited by: 914063 on Jun 20, 2012 12:56 PM
Edited by: 914063 on Jun 20, 2012 12:57 PMHi Renuka,
There are basically two ways to create an ADF UI for a BPM Task:
1. Generate it from the task
2. Create a ADF Taskflow based on Human Workflow Task
Since I tell this by heart, I might be slightly wrong in the terms.
You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
Regards,
Martien -
With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.
Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again. -
How to make a view created using enhancement framework as Interface View
Dear Experts.
I Created A new View and window by using Enhancement Framework for a standard webdynpro comp. Now i want to use the same window as a UIBB in FPM , since in window properties interface view check box is unchecked it's not allowing me to use a UIBB in FPM.
Kindly answer for the following.
1) Is there any way to make a view a interface ( whcih is by default in nature but while creating from Enhancement framework behaivng Strangly).
2) If there is no way then how to use enhanced (additional View Created in Standard WDA comp) further like in FPM ( UIBB ).
thanks in Advance.
Best Regards,
Kranthikumar Palle>
kranthi9121 wrote:
> Dear Experts.
>
> I Created A new View and window by using Enhancement Framework for a standard webdynpro comp. Now i want to use the same window as a UIBB in FPM , since in window properties interface view check box is unchecked it's not allowing me to use a UIBB in FPM.
>
> Kindly answer for the following.
>
> 1) Is there any way to make a view a interface ( whcih is by default in nature but while creating from Enhancement framework behaivng Strangly).
>
> 2) If there is no way then how to use enhanced (additional View Created in Standard WDA comp) further like in FPM ( UIBB ).
>
>
> thanks in Advance.
>
> Best Regards,
> Kranthikumar Palle
Hi,
Please see [https://cw.sdn.sap.com/cw/docs/DOC-21546|https://cw.sdn.sap.com/cw/docs/DOC-21546]
windows created through enhancement are local to component and hence they are not visible outside.
You need to find other way to provide your interface view to UIBB. -
Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?
Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens. -
Sales data are not integrated in R/3
Hello
I use BTE DE_BALE on R/3 to integrate data coming from CRM extension (EEWB). Everythig's fine in the customer FM in R/3 : I get the extension data and I add to table CT_IDOC_DATA segment E1KNVVM with these data, but they are not updated in R/3. I try to debughow the IDoc table CT_IDOC_DATA is integrated and there seems to be a problem. I don't know which ALE configuration has to be done to integrate CRM IDocs (IDoc type seemsto be DEBMAS..). How can I check it ? Is there somewhere I can check that data are not integrated ?
ThanksHi Karuna
Nice to have a so quick help.
Thanks
Below the source code of my FM :
DATA :
gv_partner_guid TYPE BU_PARTNER_GUID_BAPI,
gv_partner TYPE BU_PARTNER,
gv_crm_application LIKE bapimtcs-gen_chrstr VALUE 'Z1HT',
s_eewb_saledata TYPE ZZ1HT_BUPA_MAIN_APPEND,
t_salesdata TYPE ZZ1HT_TABLE,
s_salesdata LIKE LINE OF t_salesdata,
t_knvv TYPE STANDARD TABLE OF KNVV ,
s_knvv LIKE LINE OF t_knvv,
s_bapimtcs TYPE BAPIMTCS,
t_bapimtcs TYPE STANDARD TABLE OF BAPIMTCS,
ls_e1knvvm LIKE E1KNVVM.
REFRESH : t_salesdata,t_knvv,t_bapimtcs.
CLEAR : s_salesdata,s_knvv,s_eewb_saledata,gv_partner_guid,gv_partner,
s_bapimtcs,ls_e1knvvm.
IF sy-uname EQ 'SAGUETTA'.
break-point.
ELSE.
EXIT.
ENDIF.
MOVE is_complex_structure-header-object_instance-bpartnerguid
TO gv_partner_guid.
MOVE IS_COMPLEX_STRUCTURE-header-object_instance-bpartner
TO gv_partner.
LOOP AT it_bapimtcs INTO s_bapimtcs.
APPEND s_bapimtcs TO t_bapimtcs.
ENDLOOP.
CALL FUNCTION 'COM_BUPA_BAPIMTCS_TO_SET'
EXPORTING
iv_partner_guid = gv_partner_guid
iv_application = gv_crm_application
CHANGING
ct_bapimtcs = t_bapimtcs
cs_set = s_eewb_saledata.
MOVE s_eewb_saledata-ZZ1HT_DATA TO t_salesdata.
LOOP AT t_salesdata into s_salesdata.
CALL FUNCTION 'PI_BP_INIT_IDOC_STRUCTURES'
IMPORTING
ES_E1KNVVM = LS_E1KNVVM
EXCEPTIONS
OTHERS = 0.
MOVE s_salesdata-data_key-salesdom(4) TO LS_E1KNVVM-vkorg.
MOVE s_salesdata-data_key-salesdom+4(2) TO LS_E1KNVVM-vtweg.
MOVE s_salesdata-data_key-salesdom+6(2) TO LS_E1KNVVM-spart.
MOVE s_salesdata-data-perfk TO LS_E1KNVVM-perfk.
MOVE s_salesdata-data-lprio TO LS_E1KNVVM-lprio.
CT_IDOC_DATA-MANDT = sy-mandt.
ls_e1knvvm-msgfn = '004'.
CT_IDOC_DATA-SEGNAM = 'E1KNVVM'.
CT_IDOC_DATA-SDATA = ls_e1knvvm.
APPEND CT_IDOC_DATA.
CLEAR ls_e1knvvm.
ENDLOOP. -
FA-retirement-Asset value date and posting date are not in same fisc year
Hello,
I would like to post retirement in the new fiscal year but with asset value date in the previous year so that NBV is calculated correctly. It is not possible neither in ABAON nor in ABAVN with any transaction type.
I always get message 'Asset value date and posting date are not in same fiscal year'.
Is there any way how to handle this?
Thank you,
JanHi,
I have tried this but the settings of our Depr keys works in the way. That if you use asset value date in the new month it will calculate depreciation for the whole month.
This means if I retire with asset value date 31.12.2008 - NBV will be calculated as at 31.12.2008.
If I retire with asset value date 1.1.2008 - NBV will be calculated as at 31.1.2009.
Thank you anyway!
Maybe you are looking for
-
Please help! I start college again next week and will need it ASAP!
-
Two users can't login to Bonjour, but other users can
All the Macs in my house are set to log into iChat on startup, which creates a defacto messaging network around the house. Quite handy. But now, on one particular machine (a G5 iMac iSight) two users can't seem to log into Bonjour, although on the sa
-
How do I download in Safari and read pdf documents on ipad?
Have brand new iPad and want to download a pdf document using Safari as browser and read on the iPad. I have Adobe Reader app and Files app. iCloud is enabled. Reading List only shows download page. I can download this document quickly on my Lapt
-
PSE 8 Editor will not launch-Please HELP!
I purchased PSE 8 and installed it to my computer, which meets all system requirements. After everything was installed, I opened and Adobe ID account. When the welcome screen appears and I click on "Edit" the screen says "Launching Editor" for about
-
Chrome extension claims does not have latest ver of Acrobat despite CC
Trying to use the Adobe Acrobat - Create PDF Chrome extension on up-to-date Yosemite with CreativeCloud - extension gives "Unknown Error" and claims computer doesn't have the 'right' version of Acrobat: "A supported version of Acrobat could not be fo