Sales data are not integrated in R/3

Hello
I use BTE DE_BALE on R/3 to integrate data coming from CRM extension (EEWB). Everythig's fine in the customer FM in R/3 : I get the extension data and I add to table CT_IDOC_DATA segment E1KNVVM with these data, but they are not updated in R/3. I try to debughow the IDoc table CT_IDOC_DATA is integrated and there seems to be a problem. I don't know which ALE configuration has to be done to integrate CRM IDocs (IDoc type seemsto be DEBMAS..). How can I check it ? Is there somewhere I can check that data are not integrated ?
Thanks

Hi Karuna
Nice to have a so quick help.
Thanks
Below the source code of my FM :
DATA :
gv_partner_guid     TYPE BU_PARTNER_GUID_BAPI,
gv_partner         TYPE BU_PARTNER,
gv_crm_application LIKE bapimtcs-gen_chrstr VALUE 'Z1HT',
s_eewb_saledata    TYPE ZZ1HT_BUPA_MAIN_APPEND,
t_salesdata TYPE ZZ1HT_TABLE,
s_salesdata LIKE LINE OF t_salesdata,
t_knvv TYPE STANDARD TABLE OF KNVV ,
s_knvv LIKE LINE OF t_knvv,
s_bapimtcs TYPE BAPIMTCS,
t_bapimtcs TYPE STANDARD TABLE OF BAPIMTCS,
ls_e1knvvm LIKE E1KNVVM.
REFRESH : t_salesdata,t_knvv,t_bapimtcs.
CLEAR : s_salesdata,s_knvv,s_eewb_saledata,gv_partner_guid,gv_partner,
          s_bapimtcs,ls_e1knvvm.
IF sy-uname EQ 'SAGUETTA'.
    break-point.
ELSE.
    EXIT.
ENDIF.
MOVE is_complex_structure-header-object_instance-bpartnerguid
TO   gv_partner_guid.
MOVE IS_COMPLEX_STRUCTURE-header-object_instance-bpartner
TO gv_partner.
LOOP AT it_bapimtcs INTO s_bapimtcs.
    APPEND s_bapimtcs TO t_bapimtcs.
ENDLOOP.
CALL FUNCTION 'COM_BUPA_BAPIMTCS_TO_SET'
    EXPORTING
      iv_partner_guid = gv_partner_guid
      iv_application = gv_crm_application
    CHANGING
      ct_bapimtcs     = t_bapimtcs
      cs_set          = s_eewb_saledata.
MOVE s_eewb_saledata-ZZ1HT_DATA TO t_salesdata.
LOOP AT t_salesdata into s_salesdata.
    CALL FUNCTION 'PI_BP_INIT_IDOC_STRUCTURES'
      IMPORTING
        ES_E1KNVVM = LS_E1KNVVM
      EXCEPTIONS
        OTHERS     = 0.
    MOVE s_salesdata-data_key-salesdom(4) TO LS_E1KNVVM-vkorg.
    MOVE s_salesdata-data_key-salesdom+4(2) TO LS_E1KNVVM-vtweg.
    MOVE s_salesdata-data_key-salesdom+6(2) TO LS_E1KNVVM-spart.
    MOVE s_salesdata-data-perfk TO LS_E1KNVVM-perfk.
    MOVE s_salesdata-data-lprio TO LS_E1KNVVM-lprio.
    CT_IDOC_DATA-MANDT = sy-mandt.
    ls_e1knvvm-msgfn = '004'.
    CT_IDOC_DATA-SEGNAM = 'E1KNVVM'.
    CT_IDOC_DATA-SDATA = ls_e1knvvm.
    APPEND CT_IDOC_DATA.
    CLEAR ls_e1knvvm.
ENDLOOP.

Similar Messages

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Third party sales orders are not showing in Billing due list (VF04 )

Hi,
In Billing due list Third party sales orders are not appearing because VKDFS table those entries are there. How can we get Third party sales orders in VKDFS table as well as VF04 ?
Please suggest me.
Regards,
KUR

Hi Kur & Sandepp,
Check this notes:A) Note 210500 - Billing status of a third-party item,B)2) Note 210561 - When is a third-party item displayed in VF04.
Re
Regards,
Madhu.

Event dates are not bolded by Date Navigator in Outlook 2010

Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.

Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

In XI pro, exporting PDF to Excel problem. Excel columns and data are not properly aligned. Help?

I used 30 day trial of Acrobat XI and all the functions work perfectly. But, when I buy the program (either download or disk) my PDF that export to Excel is not working. The excel columns and data are not properly aligned as they should be. The Trial version aligns everything perfectly. What is happening? I use a MAC 10.9.5. But this shouldn't matter because the trial version works perfectly. Can anyone help?

just found out that this is posted in the wrong section.

FA-retirement-Asset value date and posting date are not in same fisc year

Hello,
I would like to post retirement in the new fiscal year but with asset value date in the previous year so that NBV is calculated correctly. It is not possible neither in ABAON nor in ABAVN with any transaction type.
I always get message 'Asset value date and posting date are not in same fiscal year'.
Is there any way how to handle this?
Thank you,
Jan

Hi,
I have tried this but the settings of our Depr keys works in the way. That if you use asset value date in the new month it will calculate depreciation for the whole month.
This means if I retire with asset value date 31.12.2008 - NBV will be calculated as at 31.12.2008.
If I retire with asset value date 1.1.2008 - NBV will be calculated as at 31.1.2009.
Thank you anyway!

Asset value date and posting date are not in same fiscal year

Hi,
Our business user has created an asset under an incorrect asset class, which he is trying to transfer to a new asset whcih was created under correct asset class. However system is restricting user with the error message "Asset value date and posting date are not in same fiscal year". Can you please advise me how we can proceed further with this error.
Regards,
Asam.

Hi,
To transfer one asset to another asset within a company code can be done through ABUMN only.
While doing this transfer you have enter the document date, posting date, and value date for the transaction, but all these dates should be in same fiscal year only.
In your case you must have been entered the dates for asset value date and posting date , and these two dates are in diff financial years.
Please make sure that both the dates are in same FY.
Hope this will fix your issue.
Thanks,
Srinu

Datas are not coming from top to bottom in collumn

Hiiiii
I am moving my data from itab to itab1.
And in itab1 datas are not started from top of the collumn for each a/c no.
A/CNO|AB|DZ|RV|SA
00001|00 |000|00 |10
00001|00 |000|00 |15
00001|00 |000|020|000
00002|00 |15 |000 |00
00002|21 |00 |000 |00
00002|00 |25 |000 |00
00002|00 |00 |000 |17
what should i do to start my data from top of the collumn.
Thanks in advance.
Edited by: sanket sagar on Mar 17, 2011 8:14 AM

Hi,
Let me add some more comments in your code.
LOOP AT IT_BKPF INTO WA_BKPF.
IF SY-SUBRC = 0. - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
ENDIF.
READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
BUKRS = WA_BKPF-BUKRS
GJAHR = WA_BKPF-GJAHR.
IF WA_BSEG-SHKZG = 'H'.
WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
ENDIF.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
ENDIF.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
SORT IT_FINAL BY SAKNR BLART.
LOOP AT IT_FINAL.
IF WA_FINAL-BLART = 'AB'
MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
ENDIF.
AND SAME FOR ALL DOC TYPES.
ENDLOOP.
SORT IT_FINAL BY HKONT .
What is the structure of the internal table.
If my understanding is correct, you want to populate a table as below.
For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
HKONT1 - AB - 1000
HKONT1 - BC - 2000
HKONT3 - CD - 2000
Please correct it if your problem is something different.

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

On my calendar, my dates are not in color,how do i get that?

On my calendar on my 3GS my dates are not in color how do I get that?

Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.

Data are not being applied at destination side

Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.

Problem solved.

OHS - Protocol (Periodic) Next due dates are not being captured properly

Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013). The Planned date is not resetting itself for the medical service sometimes.
Any idea what might be causing this issue?
Regards
Naveen

HI Naveen
Have you overridden the std BADI for calculating Next due date?
Thanks
Jagdsh

My data are not gettitng enterted in the data base

import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class Main implements ActionListener
Frame mainf;
MenuBar mb;
MenuItem List,admitform,inquiry,exit;
Menu newm,update;
Inquiry iq;
Admit ad;
Register reg;
Main()
mainf=new Frame(" Engg College V/S Mumbai University ");
     mb=new MenuBar();
     newm=new Menu(" New ");
     update=new Menu(" Update ");
     List=new MenuItem("List");
     admitform=new MenuItem("Admit");
     inquiry=new MenuItem("Inquiry");
     exit=new MenuItem("Exit");
newm.add(List);
               newm.add(admitform);
newm.add(inquiry);
               newm.add(exit);
          mb.add(newm);
          mb.add(update);
mainf.setMenuBar(mb);
               exit.addActionListener(this);
               List.addActionListener(this);
     inquiry.addActionListener(this);
     admitform.addActionListener(this);
mainf.setSize(400,300);
     mainf.setVisible(true);
public void actionPerformed(ActionEvent ae)
if (ae.getSource() == List)
          reg=new Register();
     if(ae.getSource()==inquiry)
     iq=new Inquiry();
if(ae.getSource()==admitform)
     ad=new Admit();
          if(ae.getSource()==exit)
     mainf.setVisible(false);
public static void main(String args[])
          new Main();
}

>My data are not gettitng enterted in the data
base
no real surprise to me.Can u please help me ??How? There's no connection and prepared staments anywhere in your code. Do you think the database will update itself automagically?

Sales data are not integrated in R/3

Similar Messages

Maybe you are looking for