PowerBook Running HOT After Leopard Install

Ever since I installed Leopard, my powerbook runs so hot that swear it's going to melt! Even with just one program open for a short time (like Apple Mail) the fan will be running and the unit seems like it is being overworked or something. Is anyone else experiencing this? Is Leopard so advanced that a powerbook just a few years old has a hard time running it? Any suggestions?

Thanks for your willingness to help me out.
I think the layout of Activity Monitor may be a little different in Leopard...what I am looking at under the CPU button says that the user has 100% usage on the CPU and the bar chart is totally filled in green. What the CPU column says under "all processes" is that some program called lexmarkcupsdrive (I have no idea what it is) is hogging most of my juice–if the 93.1 is the % usage. I pasted all the info on that below:
"85 LexmarkCUPSDrive _lp 93.1 3 4.05 MB 736.61 MB PowerPC"
This is seems weird because the user is"_lp". I have no idea what that is either. For the most part, all the other process users look legit like "root" and the name of my home folder .
Do you make anything of this?
My powerbook never used to heat up or even seem like it was working unless I was watching a dvd or using iTunes with tons of other programs open–the issue really irritates me.
If I see processes in my activity monitor that I don't recognize, or that look suspicious should I take action?
Thanks for your help Bob,
MacUte

Similar Messages

MBP 13" runs hot after I installed Lion

By normal usage just browsing the web, the fan runs loudly and the laptop runs very hot. Any idea what to do?

I'm having the same problem. Hopefully someone has some answers...

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

PB running slow after Leopard

My 12" PB, 1.5 Ghz G4, 1.25 RAM is running much slower after Leopard install. The machine is sluggish in all operations. What are the steps to checking how my PB is running and what can I do to improve the speed? I have done software update to 10.5.1. Thank you in advance. D

This is the first thing to do. In fact a backup is a must for any computer owner. It is not a question of if, but when hardware will fail.
Get a Firewire hard drive at least as big as your existing internal, even two if you can afford it. http://www.macsales.com/ has them.
The reason you get two, is if the first one fails and you must erase and install. If that should happen, you'll only be left with one copy of your data again, which is again a perilous point to be in case firmware or something else should cause the drive to fail. See what happened with the http://www.macmaps.com/firewirebug2.html (*) that still is affecting people.
See my backup FAQ* for additional reasons. Once you are backed up only then can we examine reasons for slowing down.
- * Links to my pages may give me compensation.

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time -been

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.

I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike

Kodak 5500 - cannot print after Leopard install

Just want to throw this printer into the list of printers that do not work after Leopard install. I get a raster stream error. I have reinstalled Kodak software; deleted and readded printer, etc, etc,. Still now printing. Scanning works fine though!

Much to my surprise, I received a reply from Kodak a mere few hours after emailing them on Sunday morning. They advised me that a new version of their all-in-one printer software (1.2.0 Release 3) for Leopard will be available on the web on Monday, October 29th.

Fan problem after Leopard install

PowerMac Dual G5 - after Leopard install, fan between hard drive and optical drive revved up like the computer was going to blast off, faster and faster until I powered down by holding down the power button. Leopard seems to be working fine, but with the fan continuing to go at high speed at all times. I've tried reboot, reinstall, pull plug for a few minutes, remove CMOS battery, and zap PRAM, all to no avail. I haven't put the panel cover back on yet, and that may work, but I won't have time to mess with it for a few days and hope for some insight before I try that.Ideas?

Problem went away. Must have been a ghost in the machine.

After Leopard install I have 2 volumes of equal size

After Leopard install I have 2 volumes of equal size. One has Leopard and the other has Tiger. How can I delete, remove, or get rid of the volume with Tiger on it? As I have upgraded to Leopard how can tell which one I have, i.e., 10.5 or 10.5.X?
Thanks for your help.

For some reason the Leopard installer kept your old Tiger partition instead of deleting it. It's probably your fault, but that doesn't matter...
Before you do this, back up any data you still want from the Tiger partition. Also rename it to something that will differentiate it from your other volume(s?). Also back up your Leopard partition before any of this.
Take your Leopard install disk, pop it in, reboot while holding C (or just click Install Leopard), choose a language, then from the menubar click Utilities, then Disk Utility. Once there, click your hard drive (not your Leopard or Tiger volumes) in the sidebar, go to the Partition tab on the right, click your Tiger volume's square (NOT YOUR LEOPARD VOLUME!!!), click the minus sign under that little graph, and click Partition. Then once that's done, drag the little resize line thingy on the bottom-left of your Leopard volume's square so that it fills up the entire area there.
If you can't make the Leopard volume take up the entire drive, you'll have to wipe the entire hard drive and restore from a backup. Yes, you will have to unless you're okay with having less space then you can. (Why can't GParted resize HFS+?!?! WHY?!!?!?!!??!)

My PowerBook G4 runs hot after installing iTunes 7.1

Only Safari and iTunes open. The iStat Pro shows the CPU bottom and top around 55 degree Celcius (but the temp haven't changed since then...crash between 7.1 and iStat? but I can feel my PB runs hot)
Anybody got the same problem?

Ditto here.
Mac OS 10.4.9. iTunes 7.1.1 (5)
Airport Extreme Base Station "chained" to 2 Aiport Express Remotes. All connections are fine. Have internet on remote Macs. Airport Admin utility displays all three airport units, but I'm now unable to broadcast to the remote Express hooked up to my stereo in adjacent room. Have done this many times in the past without problem, but not in past couple months, so can't say if it broke with 7.1 or 7.1.1, but I get this message from iTunes:
The remote speaker "Living Room Speakers" is not compatible with this version of iTunes.
Prior to restarting iTunes (and being sure all Aiport station firmware was up-to-date, I was getting the message that no speakers were connected (double-checked all speaker and stereo connections), but now just the "not compatible" message.
G5 2.7 Dual Processor Mac OS X (10.4.9) 2 GB RAM
G5 2.7 Dual Processor Mac OS X (10.4.3) 2 GB RAM

Powerbook G4 runs hot after OS X upgrade

I have a powerbookG4 that had 10.3.7. I upgraded today to 10.3.9 and upgraded iTunes from 4 to 6. (looking at the iPod video requirements) Now I'm noticing that it seems to run much hotter. I was on the internet, using AirPort (as usual) but the fan seemed to be running much faster and the bottom of the computer was almost too hot to touch. Plus, I also noticed in this form, that the computer automatically filled in the OS X form with 10.3.7, tho' I have verified in the 'about this apple' page that it now has 10.3.9.
Any suggetions? I wouldn't think running hot would be good for it, and if I want to use it on battery power, would use more power for the higher speed fan. (I did notice tho' that when I turned off AirPort for a few minutes and turned it back on that it's slowed the fan down some, and seems to be cooler, even after turning AirPort back on. Interesting.)
PowerBook G4 1.33GHz Mac OS X (10.3.9)

Welcome to Apple Discussions!
It sounds like you do may not be using the right discs. If you want to install Leopard, you will need the retail DVD--black with the purple aurora. If you want to install the original OS (Panther?), you need the exact install discs for the PowerBook. If you don't have these, you can call Apple with the serial number and get a replacement set for a fee.
Any other gray machine specific discs will simply not work. These are optimized for the computer they were shipped with.
The ?/Mac face just reflects the fact that the drive you erased is empty and there is no OS on it.
The idea of erasing and reinstalling the system software is basically a good idea. It just sounds like you are trying to use the wrong discs and will need to try to acquire the right ones.
Good luck!

Running hot after mountain lion install

Hello,
I just installed Mountain Lion last night. I had no issues at all. Checked out some of the different new features and all seemed to work fine.
But this morning after I turned my MacBook Pro back on is where I noticed something odd. I was using messages and also Safari. It was working great. My baterry was at 99% when I first turned it on. After about an hour of use I noticed the battery down to 67% and that Safari was not running as quick. It's not that it was not responding just running slow. Real slow. So I turned it back off and let it sit for a half hour and started it back up. Seems to running ok now. I even have a few programs open as well as the last time.
I just wanted to post here to see if anyone else had this issue. I think it's isolated and maybe some things didn't boot enough after install. Thoughts on this from anyone is greatly appreciated. Again it is runing fine and the slowing issue does not seem to be there now.
Thank You

Yes, me too. My Activity Monitor shows Safari Web Content absolutely destroying the CPU, exceeding 100%. Slows the whole system up just browsing.
Just compared browsing a facebook album in Chrome and Safari 6. Safari crawls through it with the CPU jumping immediately to over 90% while Chrome's processes barely ever reach 20%.
Also read this which suggests Spotlight's indexing is a potential cause but on my MBP (late 2011) Spotlight isn't shown as active:
http://gigaom.com/apple/is-mountain-lion-too-hot-for-your-mac-to-handle/
and also the CPU only runs hot while on Safari. Processor-heavy XCode consistently runs fine.
Assume a Safari bug. Anyone else experiencing this?
UPDATE: Restarting Safari makes a massive difference both to the real memory and the %CPU figures.

ILife, iWork, Microsoft Office not running after Leopard install

Hi, I installed Leopard on my MacBook, it did it successfully, but then I tried to open iPhoto and I got an error message like this:
Process: iPhoto 386
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd 102
Date/Time: 2009-11-20 11:40:25.444 -0600
OS Version: Mac OS X 10.6 (10A432)
Report Version: 6
Interval Since Last Report: 7537 sec
Crashes Since Last Report: 4
Per-App Crashes Since Last Report: 1
Anonymous UUID: EEC496A3-5D2E-458A-A85C-C11D1FB21B00
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/AppleFSCompression.framework/Versions/A/Apple FSCompression
Referenced from: /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/AppleFSCompression.framework/Versions/A/AppleF SCompression: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 1 GB, SMC 1.17f0
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.0f18, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9120822AS, 111.79 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x1d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000
I was given advice to re-install these programs, but that ended up deleting iPhoto, which is another issue I am now dealing with. I tried re-installing iLife09 from the receipt file but it told me that I must have Mac OS 10.5.5 or higher, I have 10.6:
This is really bugging me, not sure what to do. Everything was working fine up until the Snow Leopard install. I also do not have the entire computer backed up anywhere, just my music and important documents so using Time Machine isn't an option unfortunately.
Please help!

IMO, you have only one realistic option if you want to try to fix things as they stand (ignoring iPhoto) (i.e., without doing and erase and install and having an original iLife install DVD). Try a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed. You will need to reinstall the 10.6.2 combo updater.
If this approach does not work, then I think that you have lost the iLife apps unless you have a related original install DVD. If you do, then you can do an erase and install of Sno and reinstall the iLife apps.
Another possibility is to do an archive and install. Generally speaking, such an install is not very likely to yield an acceptable installation. Under your circumstances, I would say their is only a tiny probability that you would end up with a decent install.

Hard Drives locked after Leopard Install

Since this only happened after I installed Leopard, I figured here would be a good place. My apologies if it is not.
The root ( /Volumes/Entreri/ and /Volumes/Akira ) are now read only. All folders and files within them have correct permissions.
History: For a long time now, I've promised myself that one day, I was going to wipe my main drive, Ishii, and do OSX RIGHT. Ever since I had initial permissions problems since I upgraded my systems from OS9 to OSX, I ran my system (a Dual 1 Ghz Quicksilver G4) as root. Cringe away. I was young, and my attitude was that my dang computer was not going to tell me what I could, and could not delete (and trust me, after the initial switch and for years beyond, OSX still gave me plenty of those problems).
But I grew older and knew it was time to just run as an admin user, and not root. When Leopard was released, I figured it would be time to wipe my system HD (Ishii) totally clean, install OSX 10.5 and run as a normal user "sean."
Install goes fine. The finder pops up and I start to make what I assume are my first mistakes of my new life as an admin user. I get info on Entreri and Akira, and see their permissions are set to rwrwr-. **** no I say. The Everyone group (for some reason...) needs to have write access!! I change the permissions to rwrwrw and "apply to all enclosed items." It works! "Awesome," I thought, "all my permissions problems have been fixed!" I do that to both my Aux drives.
Then I get info on the system drive, Ryoko, and see the same thing... and I change it, and I hit apply to all enclosed items. About 30 seconds after a little voice in my head nags: "Why would you need to do that? The drive was wiped fresh- every file in there has the permissions OSX set for it.."
But it was in process- and I've learned not to interrupt OSX doing file changes.
As I'm sure you can guess, OSX starts behaving strangely after that. I restart off the Leopard disk, and use the disk utility to Repair Disk Permissions. Due to the number of files I idiotically changed, that takes 4 hours.
Now OSX runs fine.. but my Aux drives, Entreri and Akira, have their root directories locked.
•Getting info on the hard drive makes it look like everything's fine.
•Changing the permissions from rwrwrw to rwrwrw just to try and do something doesn't do anything.
•Applying to enclosed items run, but the root directory is still locked.
•Ignoring ownership on the volume doesn't change the locked root folder.
•FileXaminer can't seem to do anything either.
•Attempting to change the permissions in the terminal results in a Operation not permitted error.
•Permissions as reported from terminal: drwxrwxrwx@ 25 root admin 918 Dec 8 14:15 Entreri
•I ran as root, to see if I could fix the problem, but it's the same thing all over.
•When booting from leopard and running disk utility, the hard drive's are still appearing as locked- nothing is wrong with the drives. I was thinking about reinstalling, but if the installer disk sees the drives as locked, I doubted that would make an issue.
Entreri: 500 GB Seagate Barracuda 7200.9
Akira: 80 GB Seagate Barracuda 7200.6 (4 years old or so)
Ryoko: 80 GB Seagate Barracuda 7200.6
Any help would be appreciated. I fully know I screwed up.

Same here, I have 3 extra internal drives and they now show a lock graphic on the desktop icons. If I try and write any files to the drives I get a prompt stating the drive cannot be modified. I'm given an option to Authenticate with my password, but I then get a message that says I don't have sufficient access privileges. I just updated through Software Update but didn't pay attention to what was being patched. I'm guessing a security update screwed this up. I really need my drives because I use them for media production and I have a serious deadline...come on Apple, test things out before sending updates!

Canon MP 600 Printer not working after Leopard Install

I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
Any suggestions?

I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
It is being served by an older G4 whose only job is to serve the printer.
On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
In Leopard.... not a &^^&% thing.
Not happy.
deviztate wrote:
Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
Navigate to drivers and downloads... Hope this helps...
-d

Lost iSight - Ethernet - Bluetooth after Leopard install

Hi,
I installed Leopard - erase and install, in an iMac 1.83, 17 early 2006. After installation seemingly no problems with the installation iSight no longer works, built in ethernet doesn't seem to work and Bluetooth is flaky, sometime bluetooth works sometimes not.
With iSight, try to use Photo Booth and I get a black window with a picture of a camera with a slash through the camera.
With Ethernet using DHCP is self assigned an 169 ... number, so I set it to manuel and assigned a IP to it. But then Airport stopped working and lights on router don't light for the ethernet cable, and yes set to no conflicting IP.
I restarted a few times, installed all the software updates, re-installed Leopard all to no avail.
iMac Passed All ASD test.
Worked fine with Tiger
I'm at a lost so Any ideas welcomed.
TIA, Bill...

Welcome to Apple Discussions, hytan
hytan is giving you good help on resetting the hardware.
About as close as you can come to an iSight "driver" is the "QuickTimeUSBVDCDigitizer.component" file. That file should be in your GF's Mac's Hard Disk / System / Library / QuickTime folder. Look manually because Spotlight will not find this file. If the file is there, reinstallation is not needed.
If it is NOT there, you will need to restore the file to its correct location in order for your built-in iSight (or any other USB camera) to work.
To "reinstall" the file, drag a copy of the file into the correct folder location and restart your Mac. That is all there is to it.
You can use a copy of the QuickTimeUSBVDCDigitizer.component file from another Leopard Mac or from your Time Machine or other backup.
If you do not have a backup or other Mac, make a backup ASAP and use Pacifist to extract QuickTimeUSBVDCDigitizer.component from your Leopard Install disk. Instructions for Pacifist are here.
(I have seen a web page that offers a download of the QuickTimeUSBVDCDigitizer.component file, but it is labeled for Mac OS 10.4.10. I am always suspicious of non-Apple sources for System files on my Mac. Moreover, even if this file is as advertised, I do not know whether the download is a safe substitute for you. Therefore, I suggest the Pacifist alternative.)
If the file is where it should be but your built-in iSight is still not working, you will need to consider the hardware possibilities. If reset won't bring it back, contact Apple or an Apple-Authorized Service Provider for service.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

PowerBook Running HOT After Leopard Install

Similar Messages

Maybe you are looking for