Powermac G4 (OS 10.4.11) won't boot past grey apple

1- My PowerMac G4 (running OS 10.4.11) won't boot past the grey screen with the apple. Any suggestions?

I found somewhere else how to hold down the mouse on starting, which opened the tray. I was able to startup with the disk, holding down the C and get to the Disk Utility window. Tried repairing the disk, but got this message:
Fist Aid failed:
Disk Utility stopped verifying "Macintosh HD" because the following error was encountered:
The underlying task reported failure on exit. <OK>
and in the info window it says,
"Verifying volume "Macintosh HD"
Checking HFS Plus volume.
Catalog file entry not found for extent
The volume needs to be repaired.
Volume check failed.
Error: The underlying task reported failure on exit (-9972)
1 volume checked
0 HFS volumes verified
1 volume failed verification
Sounds pretty ominous! Of course, the recommendation is that I backup everything , but how can I if I can't get to the desktop to back it up? (It hasn't had a lot of use for sometime, but is available as a film scanning station, and so that I can access scanned images on my iMac. I doubt that there is a whole lot on the drive that isn't backed up, but I would prefer to back it up for sure!)
Thank you again.

Similar Messages

G4 won't boot past grey apple screen

Hi. I have been having the same issues with my G4 15". I'm frustrated. The whole thing started with stalling during applications. So I decided to reinstall my OS X 10.5. After reinstall, I copied my saved files from my "My Book" drive back to my hard drive. Stalling issues returned. I reinstalled again. still had some stalling issues, so I performed disk utilities. I repaired permissions. SMART status is verified. System still ran extremely slow. So, I followed directions on apple support for resetting the PRAM and NVRAM. After I did this, the computer won't boot past the grey apple screen. I have reset the PRAM and the NVRAM again. Still nothing. I rebooted up from OS install disk. I performed disk utilities repairing permissions and repairing HD. I did this for both my drive and the computers drive. I choose restart and again the grey apple screen. I have been trying to get this thing going for a week now. I'm near tears. Cornelius or anyone, can you help me? It says no errors are found, SMART is verified. But I can't get the computer to boot unless it is from the CD. Is the computer confused on where to boot from? Or is it shot? HELP ME PLEASE, before I play frisbee with my dear beloved mac!!!! It seems like this ALL started happening after I installed the update 10.5.8. I had ZERO problem prior to any software updates!!!

There have been report of some external drives/enclosures that do not work as a boot device. Not sure if the MyBook is in that category or not, just make sure that there is nothing else plugged into the Powerbook then try again.
Does the WD need its own power to be plugged into an AC power source? Try the other firewire port
I have one more question for ya... You were able to load OSX on this EHD using the OSX install disk in the Powerbook? And the installer saw the EHD with no problems?
If non of the above works try booting while holding down the x-key, this should force it to look for an OSX volume, not sure if it works the same on an EHD but worth a shot.

Macbook won't boot past grey Apple logo.

Hello! My mother's unibody white MacBook will not get past the grey apple and spinning gear when you first boot up the computer. This was after she opened a link in an email from a friend who had her email compromised. Now I'm getting spam emails with the same link from my mother's hacked email, and her computer won't even get to the login screen. I took it to the genius bar only to be told it was likely HD failure, but the windows partition works without a hitch! What could this be? A trojan? Is there any way to retrieve data (really just pictures) before I attempt to reinstall OS X?
Thanks!

P.S. The one or two times it did get past the mentioned screen, it moved it horribly slow speeds. It took near an hour to get the spotlight feature to open!

Another G5 iMac won't boot past grey Apple screen!! HELP!!!

Last night I tried to put my iMac to sleep. it took about 3 times, and it finally went to sleep. Today I tried to wake it up but I got the little spinning disk, and it would not wake up. I could not restart it from the screen, so I pulled out the power cord as I have had to do a few times in the past with no problems. Today when I plugged it back in it got to the grey Apple screen, but no little progress circle. I waited & waited, nothing happened so I cycled power again. This time I got the progress timer circle, but again after about 20 minutes nothing happened. I then put the install disc in and booted from that. Tried verify disc, but it failed saying it could not un-mount the volume. Tried verifying permissions, but it seemed to get stuck with just a fraction left on the progress bar, so I quit & tried again (basically where I'm at now). I have also noticed that if I choose the "start up disc" (while running from the disc) the only thing that shows in a network icon. My HD does not show up as an option. For about the past 5 months I have noticed my HD has been a bit noisy. Kind of a whirling sound that seems to get louder then quiet down & repeat....not real loud, but loud enough so I have noticed it. I have been worried that something like this might happen.
update: while repairing permissions I just got a "Disc utility error" says Disc utility has lost it's connection with the disc management tool and cannot continue. Please quit and relaunch Disc Utility. This is the same message I got the last time I tried to run it. I also have an OSX Leopard install DVD...should I be starting from that disc, or the install disc that came with it? If I should be using the newer disc, how would I get the other disc out of the machine?
So....am I up the creek with out a paddle, or is there anything I could try?
any advise would be greatly appreciate as ALL my data is on my iMac and not this POS PC I have to use now.
Thanks,
Jeff

Using Target Disk Mode is an excellent, idea, you should be able to drag your data on to the new machine.
Let us know how you made out,

Power mac G4 450 won't boot past grey apple

I took trusty old Power Mac G4 450 (PCI graphics) apart for a week to paint the office. I put everything back together as before including a lot of old SCSI peripherals, but when I start it up, the fans run, i get the chimes, but it will not boot past the apple on the grey screen. I tried a safe boot, disconnecting everything but monitor & keyboard, & resetting the pram. The battery was replaced about 8 months ago. It had been freezing a lot before this, & I considered replacing it, but all I need it for is to run an old SCSI flat bed scanner that I'd like to hang on to. Any ideas?

Hi-
Will it boot to the OS X install disc?
If so, use Disk Utility to "Repair Disk" on the start up volume.

Won't boot past grey Apple logo

I have tried presing c but it wont load from the cd drive and ive also tried shift and it wont boot into safe mode. I dont know what else to do.

Your profile doesn't say anything about what model iMac you have, the OS version installed, or any other details about how or when the issue started. If you can give us a bit more detailed information we might be able to provide additional assistance.
How long have you been using this system? Did you recently make any changes to the operating system or install any updates? Do you have your data backed up in case you need to reinstall the OS or reformat the hard drive? Do you have the original install DVD that came with your system so that you can attempt to reinstall the OS?
The issue you described indicates a possible problem with the software on your hard drive which could be due to a variety of reasons including corruption, unsupported sotware, etc. You indicated that the 'c' key didn't allow you to boot from the optical drive. What happens if you hold down the option key when you power on the system? Does it provide you with a list of boot options (eg hard drive, install disk in optical drive, external hard drives connected via USB, etc)? If you get a list of boot options then try booting from the installer disk. The installer disk gives you the ability to run Disk utility so that you can verify whether the hard drive is OK.
Target Disk Mode may provide a method for you to backup your files even if the hard drive no longer boots.

My iMac won't boot past grey screen and it didn't come with a os x disk

My iMac won't boot past grey screen with apple. I've tried booting in safemode but that didn't help and my iMac didn't come with a os x disk.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

PowerBook Won't Boot Past the Apple and Spinning Flower Screen...

I've been reading a lot of these forums, but still haven't figured out how to fix it on my laptop. So, I made my own topic.
Anyways. My dad gave me this laptop since he got a new one, so it's a hand-me-down which means I don't have this startup disk that I keep seeing talked about. I've tried Safe Boot, but when I do it with Command + V, it says all sorts of things that I just don't understand, and there is a lot of talk about the Apple Power Management? Such as:
com.apple.driver.AppleIntelCPUPowerManagement isn't a valid mach-o (magic is cefaedfe)
error mapping module file com.apple.driver.AppleIntelCPUPowerManagement
can't map com.apple.driver.AppleIntelCPUPowerManagement in preparation for loading
couldn't alloc class "AppleIntelCPUPowerManagement"
Etc, etc. And then the last lines that it ends with say:
BSD root: disk0s3, major 14, minor 2
[HCIController][configurePM] power parent ready after 1 tries
And it just stays there and doesn't boot up.
I honestly don't know what any of this means, or if it is even relevant to why my PowerBook won't boot past the Apple screen. If you have any information on how I could fix it, that'd be great. Also, if you have any questions that would help you figure it out, ask away and I will answer them.
Thanks a lot.
Message was edited by: MixtapeChick

MixtapeChick:
Welcome to Apple Discussions. Congratulations on your "new" PowerBook. I suggest that you begin with this combination procedure:
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately hold down Shift key to start up in Safe Mode.
• Log in and empty Trash.
• Restart normally and log in.
Let us know how it goes.
cornelius

Macbook won't boot past main apple screen

I was using my computer this morning (13" black Macbook that I've had since December) and it was working fine until I closed it to go get something to eat.
When I got back and opened the lid again, the screen was black, as if it was off, but I could make out the outline of the Apple logo in the centre. So I turned it off, gave it some time and turned it back on. Now it won't boot past the main Apple screen, where the little timer thing spins and spins and spins while apparently nothing else happens.
I left it alone for a couple of hours, thinking maybe it was overheated, but that didn't make a difference. I tried taking the battery out and restarting it, but that didn't work either. I called Apple, but my parents opted for Future Shop's warranty instead of Applecare, so they told me to search the website as "the issue is well-documented," since I have no tech support with them.
I've searched around to see where this is posted or if it's been answered a billion times before, but it's 35C in here, and my rage/frustration are ruining my ability to be rational, haha.
Anyone experienced this before / is there a resolution that doesn't involve me being without my computer (which is like sweet, sweet crack to me) for an undisclosed amount of time?
Thanks in advance,
Emy
Oh, and I'm not sure about the operating system version beyond that it's OSX and I regularly install whatever updates they tell me to.

Maybe Disk Utility can repair the disk this way:
-Search your installation DVD's.
-Insert the disc 1 and sthut down your Mac
-Start your Mac again while holding down the C key
-Now your Mac should boot from the CD, this can take some time.
-After a while you will see a installation screen where you can chose a language.
-Chose English and continue.
-Then click some time's next and agree with the "Software Agreement".
-Open Disk Utility. Top menu bar --> Utilities --> Open Disk Utility.
-Select your hard disk in the list of disks and volumes on the left side
-Go to the First Aid (tab somewhere on the right).
-Click the button to verify the permissions.
-Then Click the button to repair the permissions.
-Click the button to verify the disk.
-Then Click the button to repair the disk.
-Exit the Disk Utility

MacBook Pro Won't Boot Beyond Grey Apple Screen - Mystery Partition Found

My MacBook Pro, which suffers from appalling overheating (94 degrees C in each core last week) won't boot beyond the grey apple splash screen. I booted from a Developer's disk and ran Repair Disk/Disk Permissions. Both verified AND said the repairs failed. The drive (as opposed to the volumes) said it had no valid files and thus couldn't be repaired even though it verified. I target-disked it to one of my G4s and took off a bunch of apps and lightened its load, waited a while and tried again--it's been grey screen gear turning for 20 minutes now. I have Remote Desktop but it won't respond to that. Of course, Windows XP boots up perfectly normally on its Boot Camp-created partition, dumbly unaware of the general chaos on the other side.
While I had the Disk Utility from the boot disk on, I noticed my partition scheme had changed somehow. The big partition with the system was now in position #2, set between #3 (Windows--formerly #2 of 2) and a new one of only 200MB called #1 which is formatted OS X Journaled. I didn't make that partition and it couldn't be erased. I think the cpmputer is looking in the #1 spot for a system and can't find it because some renegade partition with no brain has pushed its way to the front. How do I annihilate that thing and get on with it? How did it get there?
Has anyone tried that alter the Apple Blower/Fan hack said to turn the fans on permanently?
For the record, I'm in L.A. and the ground has been rocking and rolling for the past 3 minutes on and off.
MacBook Pro 2.0/2GB/100GB Mac OS X (10.4.8) TiBookG4 1.0/512K/60; PowerMacG4 Quicksilver 933/1G/160; PowerMacG4 450/512K/30

I called Apple's Tech Support and they had me do perform sevral procedures I had done already, none of which worked. They suggested that the mystery partition (which has since ceased to reappear in the Disk Utility's view of the partition scheme) was an anomaly caused by the still-Beta Boot Camp--nothing was said about Windows XP booting, but I think you're right because whenever installing Windows, it always reserves a small "free space" on the PC's drive for its own purposes. Anyway, I'mre-installing now but very unhappy to hear I have suspected all along--the overheating is killing the computer. I know this from experience because Ihad a Powerbook G4 with a at-that-time-not-yet-recalled battery that overheated to such an extent that it fried the logic board and the harddrive. After a year of arguing with Apple, they replaced the computer with this MacBookPro--and overheating laptop that also had its battery recalled, has already been sent back to Texas for over heating (they replaced the superdrive which of course had no effect on the heat issue) and now has hard drive problems. I have two old PowerMac G4s sitting here plugging along--maybe I'm over laptops. Thanks
MacBook Pro 2.0/2GB/100GB Mac OS X (10.4.8) TiBookG4 1.0/512K/60; PowerMacG4 Quicksilver 933/1G/160; PowerMacG4 450/1GB/100

Macbook Pro won't boot past grey screen with Apple logo and then shuts off

This is a long story...
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I messed around a little bit in system preferences thinking I could fix it on my own, not really knowing what I was doing (I'm a *******). I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart.
Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. Please help. I already tried the Command-Option-P-R keys trick like five times.

If you have a full retail DVD for 10.6 you can boot from that by holding the C key during startup...but you will then be in install mode if that is what you want to do. At least go ahead and see if it will boot ok from the 10.6 disk and then you can decide what you want to do further.
Apple does not have 10.5 for sale anymore from what some other users have said on here so if you want to go that route you will have to find a copy for sale such as from eBay or one of the Mac resellers.
Before taking the machine to someone, try booting from 10.6 and see if that works...that way you can narrow down problems the machine may be having.

Won't boot past grey logo screen

I have a refurb dual 2Ghz powermac G5. New in March 2006.
It will not boot past the grey logo screen. I have tried all of the regular stuff: reset pram, reset nvram, reset-all, pushed the PMU button, etc, unplugged; reset ram; removed and reset ALL cards/memory. And nothing.
When trying to boot in single user mode, it freezes when almost getting to a prompt.
I CAN boot to open firmware. Though booting from the OS X install cd yields the computer to freeze at the grey logo screen.
I am dual booting Gentoo Linux, and the curious thing is that if I select Gentoo at boot, the computer freezes when loading the kernel for Linux.
So it's not an OSX thing it seems like; probably hardware.
I ran the 40min extended apple hardware test from the PMG5 OS X disc which passed everything with NO errors.
I then booted the disc in target mode with my iBook, and repaired permissions: it said was all okay, nothing to fix.
I removed the battery, and placed it back in. The battery tests fine with my voltage meter-tester.
I am a PC technician, but am stumped in trying to get my powermac to boot. Let me know if you have any other ideas. Thanks,
Dual 2Ghz Powermac G5
1.5GB ram
stock Radeon 9600
stock 160GB hard drive
airport card
Dual 2Ghz Powermac G5 Mac OS X (10.4.6) Logic 7.2 Gentoo PPC

Okay my powermac is at the local mac repair center. All hardware checked out okay; the tech is unsure of the issue. He's pulling parts and going to see what part is failing. He thinks the power supply is freaking out and sending out too much voltage, causing the computer to freeze at boot.

IMac (early 2008) won't boot past grey screen and has lines going vertical.

I have an early 2008 iMac that won't boot up past the grey apple screen. I've tried booting from the install CD to no avail and it also will not load my windows partition (boot camp). I've reset all the things I think I can reset and also tried starting in safe mode with no luck. Has anyone experienced this before and if so, how did you fix it?? I suppose I should note as well that the ram has been upgraded to 4gb (myself). It worked great for quite a while then I periodically got the lines along with a frozen screen but usually a restart fixed it. I'm up against a wall with it now and short of taking it in to the genius bar (closest one is almost 3 hours away) I don't know what else to do.
Any thoughts?
P.S. I've attached a picture of the lines. It gets to here and then freezes.

I suppose I should note too that when I try to boot from the CD, the screen dims and tells me to restart after a minute or so.

Help: iMac won't boot past Grey logo screen with spinning lines

My fiance's iMac (intel based) running snow leopard (upgraded from Leopard a couple months ago) will not boot past the logo and spinning lines. This started after at attempting to restart after installing updates to Safari and iTunes.
When booting in verbose mode I get these lines:
Launchctl: Dubious permissions on file (skipping): /Library/LaunchDaemons
Launchctl: Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Launchctl: Dubious permissions on file (skipping): /etc/mach_inid.d
AppleYukon2: Marvel Yukon Gigabit Adapter 88E8055 Singleport Copper SA
AppleYukon2: RxRingSize <= 1024, TxRingSize 256. RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
Then it just stops and does nothing.
I've unplugged everything except the apple keyboard and mouse. Ethernet is not connected.
She doesn't seem to have the original disc that came with the computer, but I do have the Snow Leopard upgrade disc.
What do I do? It won't boot in Safe Mode either, freezes at the same spot.
I'm not a particularly savvy Mac user as I recently embraced them when we moved in together.
Any help would be greatly appreciated

Repairing permission is not the first answer. Should try to run fsck and reset the PRAM
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, typerebootat the prompt and then press Return.
Your computer should start up normally and allow you to log in.
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.

Won't boot past grey screen

So my friends macbook is having some issues, it's the first issue she's really had with it so far. The other night it froze up, she was able to wait for it to unfreeze then she installed the updates on it, which she said took forever, then it said there was an error installing the update, then it restarted and it hasn't gone past the grey boot up screen since then.
I'm guessing it won't start because of that update that messed up. She doesn't have anything plugged into the mac other than the charger, any ideas?

This link is for troubleshooting the 'Gray Screen' problem....
http://support.apple.com/kb/TS2570
Hopefully it won't take a clean install

Powermac G4 (OS 10.4.11) won't boot past grey apple

Similar Messages

Maybe you are looking for