Powerpoint 2007 Embeded Youtube

I have been banging my head against a problem for over a week now.
I have 10 machines all windows 7 64 bit, running office 2007 32 bit, they use power point for presentations and each presentation has multiple embedded YouTube videos in them,As of last week all of them on the same day stopped working.I have tried re adding
them all and every article about how to embed and fix has not worked.
I used a machine with office 2010 and did embed the videos and they did work, I took them to these machines opened them in 2007 and wham back to not working just a white box.
I can make them work by adding in text and just hyperlinking the videos but would like to get the embedded working again but am out of ideas to try.
Anyone else run into this or have any ideas?

Hello Troms38
your questions is about the usage of Powerpoint, which is not supported here. you can post a thread in the following site for help.
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro

Similar Messages

Embedded youtube videos will no longer play in Powerpoint 2010

Since upgrading to Flashplayer 11, I can no longer play embedded youtube videos in powerpoint 2010. I get the error message that I have to upgrade Flashplayer. I have performed several clean installs, yet I continue to get the same error message stating that I have to upgrade Flashplayer. How do I correct this?

i know right here is one fix if u got 2010 powerpoint youtube did some changes thats not compatable with it . 1 way around it that might work for you is within the use old embeded code were it says version=3 change it # into 2 insted of 3. do this in both appeareances.
example <object width="1280" height="720"><param name="movie" value="http://www.youtube.com/v/1rcqwRgVvvw?version=3&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/1rcqwRgVvvw?version=3&hl=en_US" type="application/x-shockwave-flash" width="1280" height="720" allowscriptaccess="always" allowfullscreen="true"></embed></object>
change the #3 to the #2 thats it. then paste it in your powerpoint insert video from web.

Powerpoint 2013 causes IExplore to crash when previewing an embedded youtube video

Powerpoint 2013 causes IExplore to crash when previewing an embedded youtube video
As a user with "local administrator" or "Power User"privileges the video previews the video plays, but as a normal user the following error occurs.
Internet Explorer has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Debug or Close Program
Event Viewer details are as follows:
Log Name:      Application
Source:        Application Error
Date:          28/01/2015 11:22:32
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.17496, time stamp: 0x546fddcc
Faulting module name: iertutil.dll, version: 11.0.9600.17496, time stamp: 0x546fee66
Exception code: 0xc0000005
Fault offset: 0x000e53a8
Faulting process id: 0x15ec
Faulting application start time: 0x01d03aecb5356af2
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\syswow64\iertutil.dll
Report Id: f311913d-a6df-11e4-bf49-8019346e8858
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-28T11:22:32.000000000Z" />
    <EventRecordID>30194</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ALMETMP566-W7.midkent.ac.uk</Computer>
    <Security />
</System>
<EventData>
    <Data>IEXPLORE.EXE</Data>
    <Data>11.0.9600.17496</Data>
    <Data>546fddcc</Data>
    <Data>iertutil.dll</Data>
    <Data>11.0.9600.17496</Data>
    <Data>546fee66</Data>
    <Data>c0000005</Data>
    <Data>000e53a8</Data>
    <Data>15ec</Data>
    <Data>01d03aecb5356af2</Data>
    <Data>C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE</Data>
    <Data>C:\Windows\syswow64\iertutil.dll</Data>
    <Data>f311913d-a6df-11e4-bf49-8019346e8858</Data>
</EventData>
< /Event>
Process for creating a test file is as follows
Via youtube and your preferred browser, search for any video file (eg rubik's cube), select a video and start to watch it. Choose Share, Embed and copy the link information (eg <iframe width="560" height="315" src="//www.youtube.com/embed/MaltgJGz-dU"
frameborder="0" allowfullscreen></iframe>)
Close browser and create a new powerpoint 2013 presentation.
Insert, Video, Online Video
In the "From a Video Embed Code" box, paste the link information then click the arrow to apply
Save the file and then Right Click on the file and Preview.
In advance of the creation/running, I've applied the following KBs to the machine(s)
kb2817636 & kb2837627
As i said at the start, members of the Power Uses or Administrators group don't have this issue - but as 99% of our users are "users" and not really an option to make them all members of PU group.
Same also happens if the computer is removed from the domain. Admin & power users work, standard users crash IE.
Uninstall and reinstall of Office 2013 and IE11 has no apparent difference.
Assistance in this is appreciated.
Thanks
Jon

hi Jon, do you have all available updates installed for your PowerPoint? Install the two KB in the links below, then test again:
http://blogs.technet.com/b/bgp/archive/2014/04/09/support-for-youtube-videos-in-powerpoint-returns.aspx
Flynn

Fix for embedding YouTube video in powerpoint?

Is there a fix coming soon for embedding YouTube video into powerpoint? I've tried all suggestions - reinstalling, deleting Version=3, the ampersand issues, etc.). I need this functionality for an upcoming presentation in a week. Please help!!!

Mac Office Powerpoint

Embedding SWF into Powerpoint 2007....

I use this method to place a SWF in Powerpoint 2007. (see below).
My question is... how do I make the path relative and not absolute? So whatever path/destination I put in the "Movie" property is absolute and if and when I sent this PPTX file to someone (like in a folder) the SWF no longer plays. I wanted to make a path that is relative... so instead of putting "C:\Use\Profile\Desktop\Flash.swf" I wanted to know if I could do something like "Flash.swf" and then it'll play the SWF since it'd be in the root (or maybe a subfolder).
Place SWF in Powerpoint 2007:
1. Click Office Button.
2. Click “Powerpoint Options”
3. Under the “Popluar” tab check “Show Developer tab in the Ribbon”. Click OK
4. Click the “Developer” tab.
5. Click the “More Controls” button (wrench/hammer icon)
6. Choose “Shockwave Flash Object”. Click OK.
7. Cursor turns to crosshairs. Drag box to house the object.
8. In the “Properties” pop-up, find “Movie”.
9. Under “Movie”. Paste in the path of the file. (i.e. C:\Users\Profile\Desktop\flashAnimation.swf
a. Try to put the SWF in the same root location as the PPTX.

You can insert a .swf file into PowerPoint using the method you described with both an absolute and a relative path. But that will just insert it and play it as a linked file.
What you seem to want to do is to embed the file. That's tricker. The .pptx file extension apparently has a known and unfixed bug that won't let you embed a .swf. There's nothing out there, that I could find that may be of help. But you could try these two steps:
In the properties panel for the insered swf, find the EmbedMovie property and set it to "True".
Then Save As... your Presentation to the older file format (.ppt not .pptx). This may show up in the Save menu as "PowerPoint 97-2003 Presentation".
This may work, you should take note that the file size should increase significantly. If the Presentation's file size doesn't increase, then you know it hasn't been embedded and the animation will not play if you email the file (because it's not included).

Help for PowerPoint 2007 crash when running embedded SWF file with latest Flash Player?

I have developed in Xcelsius 2008 SP4 a dashboard with only Excel as the source. I output to PowerPoint and then save it as a PowerPoint 2003 PPS file. On more than a few machines that have PowerPoint 2007, PowerPoint crashes when I attempt to run the presentation. This happens only with later versions of Flash Player. I have tried uninstalling/reinstalling the latest Flash Player but it still crashes. However, when I revert back to Flash Player 10.1.159..., in PP 2007 the presentation runs perfectly.
With regard to the error I receive in PowerPoint 2007, it is as follows:
Error Signature:
AppName: powerpnt.exe AppVer: 12.0.6500.5000 AppStamp:49a68f9d
ModName: flash10u.ocx ModVer: 10.3.181.34 ModStamp:4e011a1d
fDebug: 0 Offset: 003a893c
Of note is that this behavior does not happen in PowerPoint 2003 nor does it happen when the file is saved as a SWF and launched directly in the browser on the problem machines.
I have to assume that this has happened to others so any help you could provide would be VERY appreciated.
Thank you

Hello,
on the first glance I see these: data="file:///Macintosh HD/Users/user/Documents/Website/Working.swf", what means the path to your swf file is pointing to your local hard drive which nobody can see except you. Please replace all thes pathes with the correct ones and load up your file(s) again.
If the problem remains, please send a link to your website in question, no matter how it looks like..
Hans-Günter

PowerPoint 2007 Notes Pages to PDF = low quality

We're battling a problem here where, when printing a presentation's notes pages from PowerPoint 2007 to PDF, the result has very jagged, low quality font edges. However when printing the same presentation from PowerPoint 2003, the fonts are smooth and perfect. The same result occurs making a PDF with PDF Creator, Nuance PDF Professional 5, etc. BUT, when we print the presentation's notes pages directly to the printer (a Xerox 6060 in this case), the presentation looks perfect as well.
Because of this, I can't tell where to start looking for help, here or Microsoft. I want to think that PowerPoint 2007 is outputting garbage to the PDF Maker, but like I said, when I print the notes pages directly to the printer, it looks fine.
Is there anyone experienced out there that can help shed some light on this issue please?

I assume that 2007 and 2003 of PPT were on different machines. I suspect it is either in the setup of PPT or you are not embedding fonts in the PDF. Be sure you are NOT using the Standard settings file, but select Print or Press.

Exporting to Powerpoint 2007 using the 2007 formats

I'm currently running Xcelsius 2208 and Office 2007. Because I was the first to get Office 2007 I've had to continue saving in the Office 97-2003 format (.ppt). Now that everyone has caugth up if I save in the .pptx or .pptm format the .swf appears to disappear after the file is saved and reopened. Does the .swf only run in the .ppt mode?

Hi Maureen,
You have to keep saving as PPT because PowerPoint does not support embedded Adobe Flash files in a PPTX (Office 2007).
Refer to the Export to Microsoft Word 2007 and PowerPoint 2007 in the General Issues section of the Xcelsius 2008 release notes.
Regards,
Matt

Cannot embed 3D PDF into powerpoint 2007

Hello:
I can't embed 3D model from .pdf file into powerpoint 2007.
Followed all instructions, the 3D model is captured from VMD program using acrobat 3d 8.0,
it is saved automatically as .pdf file,
it is able to open and rotate in the acrobat reader,
then in powerpoint 2007, when i want to embed it,
i click the embed 3D button, the add 3d data window appear,
but in the file selection, the .pdf file is not supported.
only those .u3d, .cad, ... are supported, and i tried these, they can be embeded.
but i am confused, how can i really embed the .pdf file to powerpoint?
Any help is appreciated. Thanks a lot.

Thanks for both of your help.
I am still not quite understand how the OCX means.
Does it mean the "embed 3D" button appeared in powerpoint or some other kind of software?
Currently what I did is export the 3d model in the .pdf to a .u3d file.
then I can choose the .u3d file and embed it since this format is supported. And I can rotate it in powerpoint. But the only problem is it's now in perspective view and I cannot change it to orthographic view inside the powerpoint.
Even in the .pdf I set the default view to orthographic, the exported and embeded is still perspective.
So is there any way to export it as orthographic model?

AirPlay fails on embeded youtube video (livestream) from New iPad to Latest gen AppleTV.

Hello,
I just purchased a new Apple Tv (03/24/2014) and tried to airplay an embeded youtube video from Safari and Chrome on my iPad and received an error. Airplay is working fine from the youtube app, and other apps as well. I've done some poking around and wasn't able to find any concrete answers as to why it's not working. Apparently this used to work prior to sometime in August (not sure exactly when) of 2013. Any helo would be much appreciated are this is one of the main reasons I purchased the Apple Tv.

Hi IntroMike.
Take a look at this URL in the XBMC forum.
http://forum.xbmc.org/showthread.php?tid=179961&page=36
This discusses the issue you are seeing. It seems to be specific to the Youtube app and some embeded videos.
There is no known solution at this time apparently.

Can't view Powerpoint 2007 thumbnails in Bridge CS5 (Win 7)

I can view 2003 (win) files (saved from Powerpoint 2007) as thumnails in Bridge, but thumbs for 2007 files (*.pptx) are not generated.
Any ideas?
Windows 7
Bridge CS5.5 (4.1.0.54)

I have seen screenshots with PPTX thumbnails visible. I believe these Bridge thumbnails appear on WinXP installs so I'm thinking there is a Win7 aspect to this...
Using a Mac with CS6 I tried a pps, ppt and a pptx file and all of them only show as Powerpoint icon and none have a thumbnail with preview of the content.
Also tried it with Apple Keynote, the Mac PP equivalent and here I checked the option to include a preview of the file but same result, just an icon of Keynote application.
Looking at the file type associations their is neither support for Powerpoint not Keynote so it does not seem possible.
The screenshot from your memory is probably manipulated or you suffer from good memory like we all seem to do every now and then...

Animations doesn't work when publishing from PPTX (Powerpoint 2007)

I have Presenter 7.0.2 (build 7464), running over PowerPoint
2007, and all the animations based on activators are not
controllable after publishded.
What I need is the same behave of published flash contents
as the powerpoint presentation permits:
- For example, one action button, uppon click on it,
activates some animations effects on others object elements.
Does the Adobe support (Platinum plans), or any of you that
hoppefully had already fix an way to avoid this, can help on this ?
Thanks in advance!

Hi,
Today I have found the 7.0.5 Update, build 7588, for Presenter 7, so I started to think that my long issue concerning the animations problem could be over with this update ... but it did not! :-(
After the update installation, the same presentation gives me the same wrong behavior.
It seams that the animations triggered by activators used on PowerPoint 2007 presentations continue without any support.
Is that right ?

Acrobat 7 Std compatible with PowerPoint 2007

I have Acrobat 7 Standard Edition; have used it for years with Office 2003. Recently I updated my PowerPoint 2003 to 2007, and now when I go to convert my 07 PowerPoint to a PDF I get the following message "Missing PDF Maker files" "Do you want to run the installer in repair mode?" I run it in repair mode and it just does the same thing over again. However when I convert any of the other Office 2003 doc to a PDF it's fine, so I am thinking it's a compatibility issue with version Acrobat 7 and PowerPoint 2007, can anyone confirm?

You will have to print to the Aodbe PDF printer. That is your only option, unless you either want to backup to an earlier version of OFFICE or upgrade Acrobat. The first version to work with OFFICE 2007 was AA8.1.2 (maybe 1). Bill

Embedding YouTube video In Flash

Hi guys,
Could someone please advise me how to embed a YouTube video file in particular place of my Flash project, should I do this in action panel or in final html file.
Here is exactly what I'd like to do: On this website www.aye-aye-media.com under 'Film' panel I have some movie samples, and after clicking buttons on right side I'd like to play embedded YouTube clips instead of flv.samples uploaded to my ftp. as it takes too long for customers to download them
Thank you in advance
Dom

Thanks Christopher,
I was thinking about it, meanwhile I'm still trying to do it the way I suggested. I'm able to embed the clip but just not in the right place, just don't know where to paste the code, I thought perhaps there is a command in ActionScript to sort this out
Cheers

Embedding YouTube file in flash project

Hi guys,
Could someone please advise me how to embed a YouTube video file in particular place of my Flash project, should I do this in action panel or in final html file.
Here is exactly what I'd like to do: On this website www.aye-aye-media.com under 'Film' panel I have some movie samples, and after clicking buttons on right side I'd like to play embedded YouTube clips instead of flv.samples uploaded to my ftp. as it takes too long for customers to download them
Thank you in advance
Dom

ok, so, is it too difficult or too easy to do what I want?

Powerpoint 2007 Embeded Youtube

Similar Messages

Maybe you are looking for