PP CC 2014.2 no longer will Playback to Blackmagic Design Mini Monitor. But CC and CC 2014.1 did.

The latest update to Premiere Pro has created problems. Sequences are frozen from playing and there is no video out to the broadcast monitor. If "Enable Mercury Transmit" is turned off then the timeline will play. There is not a problem with the Blackmagic Mini Monitor as it works fine with AE CC 2014.2 or with Premiere Pro CC. And it worked fine with Premiere Pro CC 2014. Of course we can't use PP CC to open any projects created since updating to CC 2014. We are editing commercials and must have broadcast monitoring. PLEASE HELP. AGENCY COMING IN TOMORROW FOR EDIT SESSION!
Also, another odd problem is that in this version when I open an existing project, it opens with random older sequences instead of what was open when it was saved/closed. This never happened in other versions.

I experienced the same problem. Try the following:
1) Uninstall BlackMagic Design Desktop Video and Drivers completely.
2) Reboot to finalize uninstall.
3) Install old BlackMagic Design Desktop Video v.10.1.4.
4) Restart
In my case rolling back to v10.1.4 helped to solve the problem.
Please report here if this works all right.
I am not sure who to blame: Adobe for their update or BlackMagic Design for a buggy driver.

Similar Messages

Adobe CS6 Bridge no longer will preview .tif files. Has anyone seen this and know how to correct?

Adobe CS6 Bridge no longer will preview .tif files. Has anyone seen this and know how to correct?

No problems here viewing TIFF files in Bridge. Try restoring the Bridge preferences. IMMEDIATELY after launching Bridge hold down Ctrl+Alt+Shift (Windows) or Cmd+Option+Shift (Mac). You'll get an option to restore preferences.

How long will power last on the iphone 5s with 4g and 3g and 2g?

How long will power last on the iphone 5s with 4g and 3g and 2g?

I don't think anybody would know the answer to your question.
Nobody here knows how you use your phone.
to answer your question test it out yourself.

How long will an SSD last if I fill it up and erase it over and over?

Hello, I have a 120gb SSD that I am using to capture HDMI uncompressed footage with my blackmagic intensity card. Each recording is about 15 minutes, which takes up about 110 gbs. I record about 10 times a week, so about 10 times a week, I am filling up and erasing my SSD. Should I keep using my SSD, or should I just record to my RAID setup and just use SSDs for read purposes, and not write?

Capture to a TB drive why not? cheap, fast enough, and ample capacity. Or use your array.
120GB is small, they tend to perform slower.
Ah, you are using a 2006 plus Mavericks too.
As to how much can an SSD take, A LOT, like 500TB
http://techreport.com/review/25889/the-ssd-endurance-experiment-500tb-update
As to your system, invest in a nice 256GB for the system.
Just learned - on MacRumors which is where I would think you would be - that the Samsung XP941 is bootable and works on every Mac, even our 1,1's. Just needs a $25 adapter. 1000MB/sec reads, and 700-800MB/sec writes when using 4x or 8x slot).
Aim for 50-75% use of an SSD though. And enable TRIM. Especially with all this going on. "Erase'' on an SSD is not the same as on a hdd, so I assume you are just reformatting and not really erasing (Apple terminology being what it is, when they use to still use "Initialize" in dialogues but had no such feature or command in Disk Utility).
Samsung 850 EVO 250 or even 1TB might interest you too.
Why are you not using your array?
You have quite a setup, GPU, upgraded processors (2,1 came with 8-core but not 1,1) and the 7970.

I am a CC 2013 member, am I entitled to CC 2014 as well? Is CC 2014 a stand alone app so I have access both CC 2013 and CC 2014?

upgrade CC2014 from CC 2013

I would imagine if your machine meets the system requirements for CC 2014 and you have a Cloud subscription, then you should be able to upgrade to CC 2014. You can have both on your machine... 2014 does not install over 2013.

My IPad 2 will not start. I have tryed to reset and this still did not help. After I reset the Apple logo comes on for just a second then is gone leaving a blank screen.

My IPad2 will not start after pushing the home button and the sleep button. The Apple logo is on for a short time then the screen goes black.

i just wanted to know what will happen to all of my pictures and videos if i restore my ipad, i dont want to lose that stuff, also i tried to update my ipad, it tells me to plug it in to the computer and when i do, it shows on itunes its extracting the data or something like that, but it does not began the update process, after awhile it just brings up ipad device not found, and then my ipad dies so i charge and let it charge all day till night time and all that pops up is the plug in to the itunes image on my screen, so i need to know what to do, please help me.

How long will my app be "Waiting for review" state

I posted my app on October 12th and it is still waiting for review, is this normal? How long will it take?

No. I looked it up, and I'm not connected to icloud, and I haven't sync'd up on the computer since I've had the information on my phone.
I have my E-mail, and password of the account thats linked to my iphone.(Like when you buy Apps from the store)
But I haven't found any info with that being useful.
I don't understand what happened ethier. I've had the same passcode for months, and I don't think I've randomly forgotten it. Ethier there is a major bug, or I have really bad memory.

Problem using Illustrator CS5 and CC 2014 in same PC

Hi,
I am developing some Illustrator scripts using VBScript, which should work on CS5, CS6 or CC 2014. When the scripts will be called, the user will pass, as command line argument, which Illustrator version they want to use. Accordingly I am instantiating the appropriate Illustrator scripting object by the following code:
If version = 1 Then
Set appRef = CreateObject("Illustrator.Application.CS5")
ElseIf version = 2 Then
Set appRef = CreateObject("Illustrator.Application.CS6")
ElseIf version = 3 Then
Set appRef = CreateObject("Illustrator.Application.CC.2014")
Else
Set appRef = CreateObject("Illustrator.Application")
End if
This is working correctly in one system where CS5 and CC 2014 are both installed. However, in another similar system, where CS5 and CC 2014 are both installed, this is failing. There, always the CC 2014 version is being used, even when the user wants to use CS5. On inspection it is found that the issue is with registry entry of LocalServer32 subkey of the Illustrator.Application.CS5 automation object. There I see, the path of CC 2014 executable is stored, not that of CS5. The value is C:\Program Files\Adobe\Adobe Illustrator CC 2014 (32 Bit)\Support Files\Contents\Windows\Illustrator.exe /automation. Hence, the statement CreateObject("Illustrator.Application.CS5") is actually starting the CC 2014 Illustrator version.
Does anyone know how this could have happened? Is this some installation behavior of CS5 or CC 2014, that can be controlled? In this machine CC 2014 was installed after CS5. Does CC 2014 change the registry settings of CS5, if it was installed? That seems very unlikely, as then how can one use both CS5 and CC 2014 in a system through scripts? It is possible that this is a one-off case where the registry entries have been "accidentally" changed. However, I would like to be sure.
I can re-install CS5 in this system where the issue is noted and probably the problem will go away. However, the scripts may be used in many different installations and I cannot possibly ask users to reinstall Illustrator everywhere. Moreover, this problem can occur sometimes in the future too.
Any suggestion regarding the cause and a possible full-proof solution will be highly appreciated.
Thanks in advance,
Joydeep Ray

are you referring to the audio meters panel? im on windows, and i can right click the meters panel and get options for "dynamic peaks". there are audio effects, from the effects panel if thats what you are looking for? i have one named "Dynamics" as well as several compressors.

DVR Problem w/QIP7232P2 DVR Operation; HOW Long will I have to wait for 1.9.1?

THE SHORT PROBLEM:
1) DVR records only a few moments of pre-scheduled events then the recording stops with only 10 to 30 seconds stored content and this is reported in the on screen detail.
2) DVR records a full 1 hour show however, after 20 or so minuets of playback, use of the fast forward, skip (to get around a commercial) or pause DVR functions will cause the playback to jump to the end and you can't see the rest of the story. One must start the show over again, view stuff you have seen before to get to where the error happen. If you fast forward too close to the point of the error, you will get dumped out of the show all over again. Once you get close you just have to watch commercials and what you have seen before and then not use any DVR functions in order to watch the rest of the show.
3) DVR records a full 1 hour show, you fast forward to a time that is say 50% into the show, the progress bar will move forward like normal to show you get close to the point of you stopped watching the show before (to help solve problem #2 above) BUT, if you go too far, the progress bar will jump back to the start of the show and you may be dumped out of the program or it may continue to move forward. However the operation of the progress bar is not right.
This would render the DVR less then useful. Verizon has replaced my STB and talked me through the reset of AC power operation that is the normal fix for most STB issues. I'm told this will require a software upgrade from 1.9 to 1.9.1. OK, GET IT DONE and CREDIT USERS OF DVRs THE FEE PAID FOR SOMETHING THAT IS NOT WORKING.
THE LONG STORY WITH DETAILS:
All seemed to be well with the unit for a few months and the upgrade to the new 1.9 software looked like it went off without a hitch.
But.....Starting on around 12/17/11 I noticed that my DVR was recording only about 10 to 30 seconds of programming during scheduled events. Sometimes it would attempt to record the same event one or two times, each only lasting a few moments. I called Verizon customer service I think on 12/20/11 and they asked me to pull the 120 volt power and then re-apply power. This helped the problem but, remote testing seemed to show an issue and the customer rep decided a replacement unit was needed and Order No. MDDQ08V49U was created and another set-top box was shipped to me.
It is too bad that the technology has been developed to allow the external storage of digital content however, one can't back the 200 plus hours of video one may have stored on a set-top box and restore it on a new unit. It is also not possible to reproduce the vast extent of scheduling of events. No, it seems when you change out a set top box, all the programming is gone and you have to spend an afternoon coping down the schedule from the Series Manager and then re-enter all new events by making new recording events; a very time consuming operation.
So it is frustrating once after this afternoon is wasted reprogramming a new set-top is all done with the new set-top box installed, I find that on 1/5/12 when viewing recorded programming that should be one hour long, I only seem to get 22 minutes of playback. I try to look at this in detail and see that the first 22 minutes indeed play back in a normal manor. One is able to use the jump forward mode to skip over a commercial and all is good. If after 22 minutes you don't do anything, playback will continue to the end of the 1 hour. BUT, if after the first 22 minutes you try the skip or pause function, the program will jump to the end screen where you are given the option to: Program Options Page were you can select Play, Save until I delete, or Delete.
On 1/4/12 I called Tech Support and asked what to do about this 2nd box having yet another DVR problem. Once again I was asked to cycle the 120 volt AC power and disconnect and reconnect the coax "because electricity can build up in the set-top box". (I thought that was a cute reason). I asked the Customer Service rep if this was a Tier 2 or Tier 3 Troubleshooting method and she told me she was not authorized to tell me.
1/5/12 a Manager calls me back to follow up on a survey from the December service call and after seeing that I had a trouble ticket on 1/4 to see what is going on. He attempts to talk me into getting the on screen diagnostic screen to come up (press a mix of power and OK) but that just does not work like the old set-top box. We review the problem and he is not sure what else to do then send a Tech to the house to review the problems. He did tell me the STB I had in December WAS a known bad number; something about an issue with ribbon cable fault going to the hard drive. Well OK, but it seems ODD that the two like problems seem to happen to a known bad box and now to a new box that is not in the "bad" lot of numbers. This new STB also had been running 1.9 like the old STB for some number of weeks/months without issue then BANG, a problem pops up! It seems like this is a deeper problem but I trust with all the fact Verizon can find the right answer.
1/6/12 Aaron Phelps, Cable Splicing Technician comes to look at the problem. Nice guy! I show him the two recorded shows that have the problem. He can't get the on-screen diagnostic up but we use the test via the Main Menu and all readings seem OK. He also tests signals via an external meter with good results.
At last, he calls Tier 2 Tech support and I'm told by him that it seems some bug is in ver 1.9 and we will have to wait a month for a 1.9.1 to come out that should address a memory issue in the DVR. I don't know is this is the real story but Aaron tells me the ONLY fix they have is to swap out STB and he has no other 7232 units so... I'd have to go back to a smaller hard-drive or wait a month to see what happens.
To say again, it is a problem when the only answer in practice is to reboot the STB or replace it and this does not solve the problem. The field Techs don't know about a software bug less they call tier 2 support. Also, as it is so common to just replace the STB, the process may take only a moment in physical action to swap wires HOWEVER, it is an afternoon to get programming done so a new DVR is recording all the shows a Customer has established; on top of the time talking to phone Tech support and waiting for someone to show up to the home, that is a considerable investment in Consumer time. If you can't back up the content with the local drive due to copyright issues how about a cloud approach? I'd encourage a known bug to be resolved quickly and perhaps solve the manor that a STB is backed-up and replaced.
I learn on 1/6/12 my friend had like problems:
xxxxxx address blocked
Claire had the added problem that a pre set event she set to record change by an hour. I've not seen this but, I see in the Forum URL below, another person had the same problem as reported by "DC-Videophile" on 01-01-12 at 08:33 PM. On this same forum "rich3fan" reports problems that I have on 01-04-12 11:54 AM. The very bad news would seem from "markjrenna" 01-04-12 09:29 PM where it is suggested that 1.9.1 will not be out before 1Q12!!!! That is a long time to have this problem.
http://www.avsforum.com/avs-vb/showthread.php?p=21441579#post21441579
A Review of My Events W/ Problems:
I did not record when the problems happen in December
NCIS, channel 50, "Dog Tags" USA Recorded 1/5/2012 2:00 PM
NCIS, Los Angeles; 50, USA Recorded 1/4/2012 7:00 PM
NCIS, channel 50, "In the Zone" USA Recorded 1/6/2012 6:00 PM (after Tech visit to home)
I notice with this event, when you hit fast forward, the progress bar moves forward with time then at a point it goes back to the start point, even when good video is playing in fast forward. This program worked beyond 22 min then failed at maybe 38 min. When I tried again, it failed at another point earlier (maybe 15 min) so it does not have a pattern.
Leverage, channel 51, TNT, "The Gold Club" Recorded 1/7/2012 2:00 AM (after Tech visit to home)
The Best Thing I Ever Ate, channel 164 Food Network, "Bang for the Buck" Recorded 1/6/2012 7:30 PM
My Name Is Earl, channel 52 TBS, "Stole P's HD Cart", Recorded 1/7/2012 8:00 AM (after Tech visited to home)
NCIS, channel 50 USA,"Internal Affairs" Recorded 1/6/2012 5:00 PM (after Tech visit to home)
NCIS, channel 50 USA, "UnSEALed" Recorded 1/8/2012 11:00 AM (after Tech visit to home)
and a lot more.........

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

How long will the shuffle stay on repeat?

I want to use a Shuffle as an on-hold device...how long will it continue to repeat?

Until the battery runs out of charge...which varies depending on the power consumed by the device plugged into the earphone jack..."*Up to 12 hours of music playback*" according to Apple.
Message was edited by: 0Ari0

My iMac no longer will recognize devices thru itunes on either wifi sync or usb cable

My imac no longer will recognize devices when I open itunes. I have tried every version of restarting computer, ipad etc. all versions are up to date. I cannot transfer events from iphoto to my ipad. drives me nuts. I used to do this just time. I have had macs for years and am not a dummie?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

How Long will it take to reset the 16gb ipad with clear all data in it.

How Long will it take to reset the 16gb ipad with clear all data in it.

I have the same problem. I try to reset my ipad / iphone 3g using the reset and delete all content on general. It is almost 2 days now but my ipad / iphone 3g are not yet finish. Only apple logo / looping circle appears on the screen. What will i do? thanks... iOS 5.0.1

Photoshop CC 2014 for PC will not copy or paste

Running:
Photoshop CC 2014 for PC
Windows 8.1 Pro, R2 64 bit, AMD FX3 8350 with 16GB RAM. 75% of RAM free
Photoshop CC 2014 for PC will not copy or paste.
When I create a line of text and want to copy and paste the text in the same document, the copy and paste functions are not working. The commands on the Edit menu are grayed out. CTL+C and CTL+X and CTL+V do not work.
I have the correct layer selected.
There is nothing else selected, just the text.
Copy and paste fail on new documents, existing documents, documents with backgrounds, documents without backgrounds.
I deleted all my Photoshop settings in Roaming>Adobe>Photoshop CC 2014
I uninstalled Photoshop without saving preferences, removed all files and folders and then reinstalled.
Photoshop will still not copy and paste.

I honestly don't know what may be wrong on your system to cause what you're seeing, but I can confirm that on my fully updated Windows 8.1 Pro x64 system equipped with ATI 7850 I can do cut/copy/pastes as you would like to do, so it's not a basic incompatibility.
Are you selecting the characters by dragging the mouse across them, then copying?
When pasting, have you set an insertion point first?
-Noel

Mystery with SSD - How long will it work for?

This is weird. I am writing this on my new MBP, i7, early 2011, model 8,3. Last Saturday I installed an OWC 480 GB 6G Pro SSD in it and it worked grand, I built Lion onto it and used Migration Assistant to build my account. I used it that afternoon and evening and was delighted.
On Sunday it took an AGE to boot. It ran in fits and starts - stutters - and so I bought up Activity Monitor and set it to Disk Activity and then used DiskSpeedTest to keep on hammering the drive at full speed. About every minute the disk activity graph would flat-line and the system would freeze. CPU activity remained normal, the rest of the Activity Monitor screen updated, but nothing worked, spinning beachball and all was locked up. Then it would start up and run happily for a minute, two minutes, a few seconds, and repeat the process. Each time the disk activity would slam down to zero and if I tried anything the beachball would come up and nothing worked. Then - off it would go. But, even so, I could not use it.
I popped in the original HDD late Sunday and did another Migration Assistant run, and then simply used the machine normally. On Monday I called Apple and told then what was happening and they said bring it in to the geniae at a Macstore with the SSD inside, they want to see it. So on Tuesday, today, I reinstalled the SSD and let it run, noting that it seemed to be doing the flat-line less, and as the day wore on, less and less, until about three this afternoon it seemed solid. So I moved out my old MBP, did a targeted update using a FW 800 and brought over the files I had changed, then moved the new MBP with the SSD into prime position, and here it is working fine.
Why!?
Is it possible there is some sort of burn-in? Why is it working - and not suddenly like - but gradually? Any ideas?
I know time will tell but I need to decide if I should return this SSD and go with a SATA2 OWC SSD which I have read does not have any problem, but right now - whoopee, it is faster than blazes.
Does anyone have any experience with this stuff that might explain it or tell me if I am just waiting to get thoroughly burnt?
Thanks - Lawrence

I confess I am still puzzled by what is happening during this re-indexing of which you speak. I cannot see why this would cause the whole machine to come to a grinding halt for sometimes minutes at a time, and it has not been reported on the 13" or 15" machines on which the 6G SSDs work fine. Anyway, I have indeed left the machine on for a day and it has made no difference, it will lock up for anything from a second to a minute or two every - well - few seconds or minutes. Sometimes it goes for ten minutes with no problem, then it will have nothing but stutterings for ten minutes at a time.
I went to the local genius bar last night and they hemmed and hawed and went through the startup software. I told them the system had run fine with the identical software on the HDD it came with, and I told them that the drive worked fine in the eSata dock and that the 6G SDD is known to work in the 13" and 15" MBPs, but they would not own any problem. The said it could be the drive and they had no reported problems and it was not a drive they supported, he told me in fact this was the first system he had seen so equipped and he had never heard of a problem such as this. Bottom line is I need to get another drive and show it failing in my 17" MBP, then show the same drive working in a 15" or 13" - which is not going to happen for obvious reasons.
So I gave up this afternoon, this is not a battle I have the resources to win. OWC is a first rate company and made no bones about a return and full refund and I have a 3G SSD arriving tomorrow. This is still far ahead of the HDD in performance.
I could also return the MBP and wait for some unspecified time for a new model that has this problem fixed, but I think not. I shall no longer be the speediest bloke on the block, but I shall be pretty good. Although - wait - I SHALL be the speediest bloke on the block even so!
Thanks for your help. I will monitor OWC's site as they seem to be tracking the MBPs as they come out of Apple and we'll see what happens in the future. It may be there will be a fix I can implement and I can sell the 3G and go get another 6G. But probably not.
Cheers - Lawrence

PP CC 2014.2 no longer will Playback to Blackmagic Design Mini Monitor. But CC and CC 2014.1 did.

Similar Messages

Maybe you are looking for