PPPI_Unit_of_measure

Hi Experts,
I am facing problem assigning value to standard SAP characteristic PPPI_Unit_of_measure. When i am assigning a value "pc" to the characteristic in TPROD_2 (good receipt) PI category, it is ok but when i do F4 after assigning this value in the Characteristic Value field, and go back, a value "ST" is seen instead of 'pc". This value "ST" is not a defined UOM.
When i  continue with it and download the control recipe, then "ST' value gets downloaded instead of actual 'pc".
Can anyone tell me the reason of why it is happening and the solution thereof.
Thanks,
Thomas

Hi,
This SAP note is not applicable for our version. We are in ECC6 in SAP_applcomponent 600.
Can you suggest anything for our version?
Thanks!
Thomas

Similar Messages

  • Goods Issue with PI sheets

    Hi
    I am trying to do Goods Issue with PI sheet in SAP v4.7c. I have used the following characteristics however only the finish product and the qty comes up in the PI Sheet.
    can any one please let me know what should be done to have components assigned to the phase or irresepective of the phase:
    The scope of the Component Recipe destination is 03: for all order items and reservation and
    the position is 05: at the start of the phase
    The characteristics used are:
    PPPI_INPUT_GROUP          Material list
    PPPI_MESSAGE_CATEGORY          PI_CONS
    PPPI_PROCESS_ORDER          
    PPPI_RESERVATION          
    PPPI_RESERVATION_ITEM          
    PPPI_MATERIAL          
    PPPI_VARIABLE          'MYVAR&0050&'
    PPPI_MATERIAL_CONSUMED          
    PPPI_UNIT_OF_MEASURE          
    PPPI_AUTOMATIC_VALUE          Event date
    PPPI_AUTOMATIC_VALUE          Event time
    PPPI_OUTPUT_TEXT          Material
    PPPI_OUTPUT_CHARACTERISTIC          PPPI_MATERIAL
    PPPI_OUTPUT_TEXT          Material quantity-target value
    PPPI_OUTPUT_CHARACTERISTIC          PPPI_MATERIAL_CONSUMED
    PPPI_OUTPUT_TEXT          Unit of measure
    PPPI_OUTPUT_CHARACTERISTIC          PPPI_UNIT_OF_MEASURE
    PPPI_INPUT_REQUEST          Material quantity-actual value
    PPPI_DEFAULT_VARIABLE          'MYVAR&0050&'
    PPPI_REQUESTED_VALUE          PPPI_MATERIAL_CONSUMED
    PPPI_VALIDATION_FORMULA          ( X > ( 0.95 * 'MYVAR&0050&'))
    PPPI_VALIDATION_FORMULA          AND
    PPPI_VALIDATION_FORMULA          ( X < ( 1.05 * 'MYVAR&0050&'))
    PPPI_OUTPUT_TEXT          Unit of measure
    PPPI_OUTPUT_CHARACTERISTIC          PPPI_UNIT_OF_MEASURE
    PPPI_INPUT_REQUEST          Batch
    PPPI_REQUESTED_VALUE          PPPI_BATCH
    PPPI_MESSAGE_CATEGORY          SIGN
    PPPI_PROCESS_ORDER          
    PPPI_CONTROL_RECIPE          
    PPPI_OPERATION          
    PPPI_PHASE          
    Can any one please let me know where am I missing!!
    Thanks in advance
    -Rahul

    This is at control recipe creation or you are checking the instruction in the process order ?
    This is a simple PI which is working OK fo rmaterial consumption.
    Check it.
    10     PPPI_DATA_REQUEST_TYPE     Solicitud de datos simple
    20     PPPI_MESSAGE_CATEGORY     PI_CONS
    30     PPPI_UNIT_OF_MEASURE
    40     PPPI_OPERATION
    50     PPPI_OUTPUT_TEXT     Operación
    60     PPPI_OUTPUT_CHARACTERISTIC     PPPI_OPERATION
    70     PPPI_PHASE
    80     PPPI_OUTPUT_TEXT     Fase
    90     PPPI_OUTPUT_CHARACTERISTIC     PPPI_PHASE
    100     PPPI_RESERVATION
    110     PPPI_OUTPUT_TEXT     Reserva
    120     PPPI_OUTPUT_CHARACTERISTIC     PPPI_RESERVATION
    122     PPPI_RESERVATION_ITEM
    126     PPPI_OUTPUT_TEXT     Item
    127     PPPI_OUTPUT_CHARACTERISTIC     PPPI_RESERVATION_ITEM
    150     PPPI_PROCESS_ORDER
    160     PPPI_AUTOMATIC_VALUE     Hora de evento
    170     PPPI_AUTOMATIC_VALUE     Fecha de evento
    180     PPPI_MATERIAL
    190     PPPI_OUTPUT_TEXT     Code
    200     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL
    210     PPPI_MATERIAL_SHORT_TEXT
    220     PPPI_OUTPUT_TEXT     Material
    250     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL_SHORT_TEXT
    300     PPPI_MATERIAL_QUANTITY
    330     PPPI_OUTPUT_TEXT     Plan
    360     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL_QUANTITY
    400     PPPI_MATERIAL_CO_PRODUCT
    500     PPPI_OUTPUT_TEXT     Um
    600     PPPI_OUTPUT_CHARACTERISTIC     PPPI_UNIT_OF_MEASURE
    700     PPPI_INPUT_REQUEST     Lote
    800     PPPI_BATCH
    900     PPPI_REQUESTED_VALUE     PPPI_BATCH
    1000     PPPI_INPUT_REQUEST     Cantidad Real
    1100      PPPI_MATERIAL_CONSUMED
    1200     PPPI_REQUESTED_VALUE     PPPI_MATERIAL_CONSUMED
    1300     PPPI_INPUT_REQUEST     Sloc
    1400     PPPI_STORAGE_LOCATION
    1500     PPPI_REQUESTED_VALUE     PPPI_STORAGE_LOCATION

  • Browser-based PI sheet - Export parameters

    Hi All,
    I'm working on browser based PI sheet.
    I have a custom function module with characteristic PPPI_FUNCTION_NAME linked to a Process message.
    I'm not able to add a new export parameter and table parameters (for repeated data request).
    Only an export parameter at the moment has been defined:
    Characteristic                            Characteristic value
    PPPI_EXPORT_PARAMETER     PROCESS_ORDER
    PPPI_PROCESS_ORDER
    The new export parameter should be linked to another process message, defined as below:
    Characteristic                            Characteristic value
    PPPI_VARIABLE                     VAR_REQ_BATCH_DENSITY
    PPPI_REQUESTED_VALUE     ZPPPI_BATCH_DENSITY_BLEND
    Table parameters with Material data for repeated data request should be linked to a process message defined as below:
    Characteristic                            Characteristic value
    PPPI_INPUT_REQUEST     Material
    PPPI_REQUESTED_VALUE     PPPI_MATERIAL
    PPPI_INPUT_REQUEST     Actual use:
    PPPI_REQUESTED_VALUE     PPPI_MATERIAL_CONSUMED
    PPPI_INPUT_REQUEST     UoM:
    PPPI_REQUESTED_VALUE     PPPI_UNIT_OF_MEASURE
    PPPI_INPUT_REQUEST     Batch:
    PPPI_REQUESTED_VALUE     PPPI_BATCH
    PPPI_INPUT_REQUEST     Storage Loc:
    PPPI_REQUESTED_VALUE     PPPI_STORAGE_LOCATION
    Thanks in advance.
    Regards,
    Gabriele

    Hi,
    Use Characteristic PPPI_PHASE_SHORT_TEXT as a Out put characteristic in your PI category.
    Regards,
    Dhaval

  • Goods movement from PI sheet

    Dear Gurus,
    I am entering and saving the actual consumed quantity of components in the PI sheet but the stock is not reducing (In MMBE, same stock in unrestricted use before and after goods issue). Why?
    All replies will be rewarded.
    Regards,
    Jejesh.

    Dear Arne,
    I am using the following INSTRUCTION for Material list in PI sheet.
    ZMATINF -   10     PPPI_MATERIAL
                       20     PPPI_RESERVATION_ITEM
                      30     PPPI_MATERIAL_SHORT_TEXT
                      40     PPPI_BATCH
                      50     PPPI_MATERIAL_QUANTITY
                      55     PPPI_MATERIAL_CONSUMED
                      60     PPPI_UNIT_OF_MEASURE
                      70     PPPI_STORAGE_LOCATION
    With this i am getting material component list with batches after doing the batch determination in the process order which is nothing but a BOM list.
    But normally my actual goods dispensing will differ from the BOM components.
    I want the system to display this list (The actual list after doing GI i,e MB1A).
    How can we do Auto GI/GR through PI sheet?
    Kindly explain.
    Regards
    Jeevan

  • Problem in Process Management

    Hello Experts,
    I have the following issue:
    I have defined process instruction category Z1 for reading data from OPC server with the following characteristics:
    10     PPPI_DATA_ACCESS     Manufacturing Data Access
    20     PPPI_BUTTON_TEXT     HOW MUCH?
    30     PPPI_FUNCTION_DURING_DISPLAY     allowed
    40     PPPI_IMPORT_DATA     ODA:S000.TEST1.PV
    50     PPPI_STRING_VARIABLE     QTY
    60     PPPI_OUTPUT_TEXT     QUANTITY
    70     PPPI_OUTPUT_VARIABLE     QTY
    Now I want to automatically send the value that have been read from OPC server into process instruction category Z2, where I have the following characteristics:
    10     PPPI_MESSAGE_CATEGORY     PI_PROD
    20     PPPI_BATCH
    30     PPPI_DELIVERY_COMPLETE
    40     PPPI_EVENT_DATE
    50     PPPI_EVENT_TIME
    60     PPPI_MATERIAL
    70     PPPI_MATERIAL_PRODUCED  "VALUE TO BE TRANSFERRED HERE!!!"
    80     PPPI_OPERATION
    90     PPPI_ORDER_ITEM_NUMBER
    100     PPPI_PHASE
    110     PPPI_PROCESS_ORDER
    120     PPPI_STOCK_TYPE     
    130     PPPI_STORAGE_LOCATION
    140     PPPI_UNIT_OF_MEASURE
    I want to transfer this value as value of characteristic PPPI_MATERIAL_PRODUCED.
    Please advise me on that problem.
    Thank you in advance.
    BR,
    Nikolay

    Hi Julian
    Did you check whether all the upgrade program ran successfully? Also can you please let me know when exactly you get the message ?
    Thanks
    Debraj Roy

  • Goods Movement in PI Sheet

    Hi,
    I have to mapped PP-PI Scenario for one of our client, so i want to know that how goods movement will be happen in t cod e COEBR at the time of PI sheet processing. And also please ellborate the Massage sending and Recieving Process.
    Thanks in Advance,
    Vishal

    Dear Arne,
    I am using the following INSTRUCTION for Material list in PI sheet.
    ZMATINF -   10     PPPI_MATERIAL
                       20     PPPI_RESERVATION_ITEM
                      30     PPPI_MATERIAL_SHORT_TEXT
                      40     PPPI_BATCH
                      50     PPPI_MATERIAL_QUANTITY
                      55     PPPI_MATERIAL_CONSUMED
                      60     PPPI_UNIT_OF_MEASURE
                      70     PPPI_STORAGE_LOCATION
    With this i am getting material component list with batches after doing the batch determination in the process order which is nothing but a BOM list.
    But normally my actual goods dispensing will differ from the BOM components.
    I want the system to display this list (The actual list after doing GI i,e MB1A).
    How can we do Auto GI/GR through PI sheet?
    Kindly explain.
    Regards
    Jeevan

  • GI/GR from Pi sheet

    Dear All,
    I am using the following INSTRUCTION for Material list in PI sheet.
    ZMATINF - 10 PPPI_MATERIAL
    20 PPPI_RESERVATION_ITEM
    30 PPPI_MATERIAL_SHORT_TEXT
    40 PPPI_BATCH
    50 PPPI_MATERIAL_QUANTITY
    55 PPPI_MATERIAL_CONSUMED
    60 PPPI_UNIT_OF_MEASURE
    70 PPPI_STORAGE_LOCATION
    With this i am getting material component list with batches after doing the batch determination in the process order which is nothing but a BOM list.
    But normally my actual goods dispensing will differ from the BOM components.
    I want the system to display this list (The actual list after doing GI i,e MB1A).
    How can we do Auto GI/GR through PI sheet?
    Kindly explain.
    Regards
    Jeevan

    closed

  • PP-PI    CONS_I

    Hello All,
    I have 10 Rawmaterials to be consumed to make a finished goods.And I'm using PI sheet to capture the material consumed.
    I'm using Process Instruction Category CONS_I in master recipe.
    Should i declare CONS_I   10 times in the control recipe with all the characteristic values related to this 10 raw materials or Only once.
    Can we have any automatic or short cut in assigning the values for the following:
    PPPI_INPUT_REQUEST: How  to use this more effectivley.
    PPPI_STORAGE_LOCATION:?
    PPPI_UNIT_OF_MEASURE: ?
    PPPI_MATERIAL: For sure we have to assign material no.- to my understanding.
    Thanks in advance.
    Samson
    Edited by: sam son on Jun 12, 2008 10:49 AM

    I have figured out the process of configuration.
    Reg
    Samson

  • Error Message - Control Recipe

    Sir,
    While generating control recipe I am getting following error message.
    "Value cannot be assigned autom. to char. 0015 PPPI_UNIT_OF_MEASURE in proc.instr. 0000 phase 0110"
    Please let me know how to resolve this error.
    Regards,
    Prashant Salvi

    hi,
    Go to Phase 0020 and then Process Instruction 0010.I think somewhere in this process Instrucition you have used PPPI_UNIT_OF _MEASURE as a output characteristic which has created this problem.Change it to input characterstic and then try to create the control recipe.
    Regards,
    Muthamil

  • Browser Based PI sheet_ Partial Confirmation

    Hi Gurus,
    I am working on Browser based PI sheet. There is no provision of Reporting Data like in ABAP based PI sheet, so as to do partial confirmation and GI, GR.
    Now client wants partial confirmation thr. browser based PI sheet. How to achieve it?
    Regards,
    PRADEEP
    Edited by: PRADEEP on Apr 20, 2009 1:56 PM

    Hello,
    you can use a process instruction having this characteristics and confirm events in the phase,
    (sorry about language), using PI_PHST message.
    0010     PPPI_DATA_REQUEST_TYPE     Solicitud de datos simple
    0020     PPPI_MESSAGE_CATEGORY     PI_PHST
    0030     PPPI_PROCESS_ORDER     1000540
    0050     PPPI_INPUT_REQUEST     Fecha
    0060     PPPI_REQUESTED_VALUE     PPPI_EVENT_DATE
    0070     PPPI_INPUT_REQUEST     Hora
    0080     PPPI_REQUESTED_VALUE     PPPI_EVENT_TIME
    0090     PPPI_UNIT_OF_MEASURE     kg
    0100     PPPI_INPUT_REQUEST     Evento de fase
    1000     PPPI_REQUESTED_VALUE     PPPI_PHASE_STATUS
    1009     PPPI_INPUT_REQUEST     Recurso:
    1010     PPPI_REQUESTED_VALUE     PPPI_PHASE_RESOURCE
    1019     PPPI_INPUT_REQUEST     Cantidad Procesada
    1020     PPPI_REQUESTED_VALUE     PPPI_YIELD_TO_CONFIRM
    2000     PPPI_PHASE                     0020
    or . using  Proc. Instruction CONF_PH you can go to the COR6 transaction from PI Sheet and carry out the partial confirmation....
    0010     PPPI_BUTTON_TEXT                     Enter confirmation
    0020     PPPI_FUNCTION_NAME     COPF_ENTER_CONFIRMATION
    0030     PPPI_FUNCTION_DURING_DISPLAY     Permitido
    0040     PPPI_EXPORT_PARAMETER     PROCESS_ORDER
    0050     PPPI_PROCESS_ORDER     1000540
    0060     PPPI_EXPORT_PARAMETER     OPERATION
    0070     PPPI_PHASE                     0020
    0080     PPPI_EXPORT_PARAMETER     TCOD
    0090     PPPI_TRANSACTION_CODE     Notificación: Hoja salario
    Regards

  • Browser based PI sheet functionality

    hi all
    as far as i tried i was getting batch determination option in abap based pi sheet but same option i could not get in browser based pi sheet.  same in abap based pi sheet Immediately after saving the consumption option in one phase system is asking for a report of message and we can send that message to its destination while in Browser based pi sheet message is generating only after completing the full pi sheet but not immediatly after saving particular function.
    can any body suggest me the option of immediatly creation of message and batch determination in browser based pi sheet.
    thanks in advance

    Hi,
    PI Catogory is as below.
    INSTcat    Description                                               Type of process instruction
    CONS_I     Material consumption, all message char.     2
    Characteristics are as per below described.
    10     PPPI_DATA_REQUEST_TYPE     REPEATED
    20     PPPI_MESSAGE_CATEGORY     PI_CONS
    30     PPPI_PROCESS_ORDER
    40     PPPI_OPERATION
    50     PPPI_PHASE
    60     PPPI_MATERIAL
    61     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL
    70     PPPI_BATCH
    80     PPPI_STORAGE_LOCATION
    90     PPPI_FINAL_ISSUE
    100     PPPI_RESERVATION_ITEM
    110     PPPI_RESERVATION
    200     PPPI_AUTOMATIC_VALUE     PPPI_EVENT_DATE
    210     PPPI_AUTOMATIC_VALUE     PPPI_EVENT_TIME
    300     PPPI_INPUT_REQUEST     Material quantity consumed:
    301     PPPI_REQUESTED_VALUE     PPPI_MATERIAL_CONSUMED
    302     PPPI_UNIT_OF_MEASURE
    400     PPPI_MATERIAL_SHORT_TEXT
    401     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL_SHORT_TEXT
    402     PPPI_OUTPUT_TEXT     Planned Quantity:
    403     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL_QUANTITY
    404     PPPI_MATERIAL_QUANTITY
    405     PPPI_INPUT_REQUEST     Material Issue
    406     PPPI_VARIABLE     Y
    407     PPPI_REQUESTED_VALUE     ZPPPI_MATERAIL_ISSUE
    408     PPPI_COMMAND     CLOSE TABLE ROW
    409     PPPI_ACTION     EXECUTE
    410     PPPI_FORMULA     Y=1
    For process message PI_cons refer below details.
    PPPI_BATCH     Batch
    PPPI_EVENT_DATE     Date of Event
    PPPI_EVENT_TIME     Date/Time of Event
    PPPI_FINAL_ISSUE     Indicator: Final Issue
    PPPI_MATERIAL     Material Number
    PPPI_MATERIAL_CONSUMED     Quantity of Material Consumed
    PPPI_OPERATION     Operation Number
    PPPI_PHASE     Phase Number
    PPPI_PROCESS_ORDER     Process Order
    PPPI_RESERVATION     Reservation
    PPPI_RESERVATION_ITEM     Reservation Item Number
    PPPI_SPECIAL_STOCK     Special Stock Indicator
    PPPI_STOCK_TYPE     Stock Type
    PPPI_STORAGE_LOCATION     Storage Location
    PPPI_UNIT_OF_MEASURE     Unit of Measure
    PPPI_VENDOR     Vendor
    ZPPPI_MATERAIL_ISSUE     MATERIAL ISSUE
    Any other detiails required then tell me.

Maybe you are looking for

  • Importing packages

    I have a question regarding import statement in java language. When I use import java.util.*; and use only say Date class in that package in my class, does java compiler import all the classes that belong to util package or only the class that I am u

  • How to make a whole table row be read at once?

    Hi, I want to make a whole table row be read at once by screenreaders if the table is not editable? I tried to use "getAccessibleSelection" and return a own implementation which returns the number of columns at "getAccessibleSelectionCount". But if "

  • Website is loading too slow

    I recently published a site to mac and it is working fine on my computer when i view it. However, when i try to load my site on other computers, it takes 20-30 seconds to load. We have already gone in and downsized all of our pictures. they are on th

  • SSL authentication

    Hello I am configuring ssl authentication ( document oracle support 736510.1) But when doing tnsping from client side i have an tns-12560 [oracle@testrac3 admin]$ tnsping TEST TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 17-JUN-2013

  • Monitoring using headphones

    what's up yall? i have a problem that seems simple but can't figure it out. i'm using apogee's rosetta 800 with logic. the rosetta has 8 ins/outs which are being used with a mackie 1202. outputs 1&2 of rosetta are on lines 9/10 of mackie and the alt