PR is must to create PO

Hi
Can any one tell me what are all the settings needed to keep PR mandatory to create PO.
Thanks in advance
srini

Although I'm not MM consultant, but to reply from the business process point of view as you placed your question in business process expert community.
Therefore, it is not always Po is created through PR. There are other processes where PO can be created without PR such as direct materials purchase in case of emergency acquisitions. furthermore, there are contract orders and automatic PO creation from MRP run.
I hope that this infor was of help and your further clarifying reply would help others to understand your issue and propose solution accordingly.
Regards, MMA

Similar Messages

This web site must be created on a server that is running Microsoft Sharepoint Foundation. Please choose another Location

Hi all, I installed microsoft sharepoint designer 2010. It was working perfectly up until yesterday when I create a new site, it gave me an error that said " This web site must be created on a server that is running Microsoft Sharepoint Foundation.
Please choose another Location " Now I can't create any sharepoint site and it freaks me out. I tried repairing, unistalling and reinstalling but still i get the same message.

You have to have SharePoint 2010, either SharePoint Foundation 2010 or SharePoint Server 2010, installed somewhere in order to be able to create SharePoint sites with SharePoint Designer 2010. SharePoint Designer 2010 is a client-side product, which is usually
installed on end user machines and then used to connect to a server-side edition of SharePoint 2010 (either of the two I mentioned above) to modify the SharePoint sites hosted on that server-side product.
It is possible to install SharePoint Foundation 2010 on a client operating system (Windows 7), but it is much more likely that a production environment will involve installing SharePoint Foundation 2010 or SharePoint Server 2010 on a server operating system
(Windows Server 2008 or Windows Server 2008 R2) on a central server that can be accessed by multiple users.
If you are looking to do testing, you can either install Foundation on Windows 7, or use a virtualization product such as Hyper-V, VMware Workstation, Virtual Box, to name a few, to build a virtual server hosting SharePoint.
You aren't going to be able to create SharePoint sites with SPD until you have SharePoint Foundation 2010 or SharePoint Server 2010 somewhere for it to connect to, sorry.
John
MCTS: WSS v3, MOSS 2007, and SCOM 2007
MCITP: Enterprise Project Management with Project Server 2007
Now Available on Amazon - The SharePoint 2010 Disaster Recovery Guide. Also available -
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

FRM-13002 : Stacked and Tab Canvas must be created within Content Canvas

Hi,
I have a Tab Canvas with 2 pages on it.
In one of the pages the data to be displayed will be
out of the region(size or length) of that page.
I read in this forum for the same problem, the
member had suggested to use a Stacked Canvas on that
Tab page alone and enable the scrollbars of the stacked canvas.
When I drag and drop a stacked canvas on a tab page
of the tab canvas I get the following error:
FRM-13002 : Stacked and Tab Canvas must be created
within content canvas.
Any help is appreciated.
Thanks in advance
Sharath

Hi,
I am breaking my head over this.
I am still unable to solve this issue.
========The Requirement is as follows :===========
When I select a Tab Page of a Tab canvas, I get a
combo box with items in it. When I select an item from
the combo box, based on the item selected, I am
retrieveing the data from the database and displaying
it in that Tab Page itself. This data is in a matrix
format. i,e Has a number of rows and columns.
Without a Horizontal and a Vertical Toolbar attached
to the Tab Page I would be unable to view all the records
that are displayed on that Tab Page.
Any suggestions or examples is most welcome and
appreciated.
NOTE : ALso in what situations can we use a stacked
canvas, if the designer does not allow me to
use it with other canvases?.
Thanks in advance
Sharath.

Error- DBMS_STANDARD package must be created before using PL/SQL

HI
I am trying to run a very small and simple program on my Oracle81 personal edition on Win98.
I get this error when i want to execute the program
" package DBMS_STANDARD must be created before using PL/SQL "
What should i do to create the package??
Thank you
Lin

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this question to the Database - General forum or the Installation forum.
The URLs are:
General Database Discussions
and
Database Installation

Must collaborators create an account?

Hello
I am considering the purchase of Acrobat.com premium in order to lead a small team in a writing project for a Baldrige application. We all have busy "real jobs" and find it difficult to get together in real life. I tried Microsoft Office Live, but the collaboration and change-tracking features frustrated my team members.
Must each collaborator create an account with Adobe? We will have "guest" collaborators and reviewers during the time we're writing the 50-page project, and I know from past efforts that not all will wish to go through the hassle of registering, but would prefer just to navigate to a URL to view and contribute content with minimal requirement for logging on and "secret handshakes" as they call the password process. This isn't anything top secret, so password protection would probably be unnecessary or could be quite simple.
Thanks.
Jim Carroll

Hi Jim,
Thanks for the post, and for considering Buzzword for your shared review. While non-registered users can review a document, anyone who wishes to leave a comment needs to create a Buzzword account. We haven't figured out a way to let you, the author, know who made what comments without this step... but it's an interesting idea. Be assured that the product team pays attention to these posts, so your request has been heard. In the meantime, registration takes just a few minutes and Buzzword really is elegant and easy to use with a team - we hope you'll give it a try.
Kind Regards,
Michelle

Create task from conversation thread in news feed - Task must be created in custom task list

Hi All,<o:p></o:p>
Have a new requirement
were user should be able to create a task for himself from a conversational
thread in News feed.<o:p></o:p>
In
SharePoint 2013 we have a functionality where we can follow up on a
conversation and it creates a task in My Tasks which is in My site.<o:p></o:p>
But my requirement
is to create a task in Tasks list in same site collection on click of follow
up.<o:p></o:p>
I have
tried one approach as below :<o:p></o:p>
My Tasks in
My site is an aggregated view of all tasks assigned to the logged in user. When
i follow a task in News feed a personal task is created in My task
(WmaAggregatorList_User internal name) list. When i Edit the personal task and
change the Projects
drop down to the required Project Name and Check -"Make this task public to project
members" it just creates a task is specific Site and moves
the task.<o:p></o:p>
I tried to
find if Projects and Check box are columns of Task list , but did not find any
columns.<o:p></o:p>
I am trying
to create a event receiver which would make these columns be set to Site Name
and check box checked so that when user creates a task it will directly move to
Custom Task list.<o:p></o:p>
Please
guide <o:p></o:p>
Thanks in
Advance<o:p></o:p>
Pallavi

Thank you for your responce. I used a content query wp to rollup only the Major Milestones, but am unable to overlay the results to a calendar.. The link you provided is for overlaying different task lists onto a calendar, but does not detail how to
overlay the results from the content query onto a calendar.

Too Many Files in iWeb Site - Why must iWeb create so many duplicates?

I have created a website for all of my family photos. My current hosting plan gives me 100GB space and a limitation of 20,000 files.
The problem that I have at the moment is how iWeb creates the site and all of the required files for display. I am using the Dark Room theme in iWeb 2008. Basically, it takes the picture that you want to display, adds it to the top page, then creates a directory for that picture, and into this directory it creates and stores a micro.jpg file, a mip.jpg file, and a thumb.jpg file. So to display a single picture, you have a minimum of 4 supporting files and directories.
Also, iWeb seems to store all of the
I have a lot of pictures, around 3,000, so I am approaching the file quota set by my web hosting service. To resolve this my questions are:
1) Does every theme in iWeb create all of these additonal files for displaying the pictures?
2) Maybe I just have some preference in iWeb set incorrectly. Is there something that would improve this? I could put all of the photo albums onto a single page to reduce all of the common graphics that are being stored, but that seems a bit ridiculous to have to do.
3) Maybe I should change my web hosting company. I have checked both my hosting company and other hosting companies to see what the file quotas are. None of them seem to list this. I am reluctant to change my hosting company only to find that the new hosting company has the same sort of limitation in place. Has anyone had issues with file quotas?

To cut your file sizes, use the Black or the White template.
Photo album pages don't work too well. They look good but you have to keep the number of albums and the number of photos per album fairly small if you want the page to download in a reasonable time.
Obviously your individual image file sizes have to be reasonable.
I turn off "Optimize images on import" in iWeb preferences and use ImageWell to reduce the size because it has a visual indicator. Try it out to see what I mean...
http://xtralean.com/IWOverview.html
Have you considered using flash to display your photos?
Have a look at ....
http://www.airtightinteractive.com/viewers/
... and...
http://jalbum.net/
Using JALbum you get some free storage as well.

Purchase requisition must be create with material codes only

Hi gays,
Can u solve my problem.
We are having "3 " document types to create purchase requisition.
3 types are using different depts.
I need to restrict the 1 document type with material code only they should raise the purchase requisition.
other 2 types can raise the purchase requisition with or with out material code.
Please explain how to restrict.

First check the field selection key assigned for the Document type at
Spro > MM > Purchasing > PR > Define document types..
Then Go to
Spro > MM > Purchasing > PR > Define Screen lay out, here Select the above field selection key & copy it as and make the
Description field as Display..
Again go to Spro > MM > Purchasing > PR > Define document types..
and assign the field selection key for the Document type for which you want the Description field as Display..
Then Create PR & Check

Is it a must to create font folders separately for 32bit Ai & 64bit PS ?

is there any way to create ONE common font folder for both 32bit Ai and 63bit PS?

400 fonts slow down your system? I have a 3 years old mid range computer and when I activate about 2000 fonts except a little wait when I access the font menu for the first time, I don't see any other performance difference between sessions with activated and non-activated fonts.
I don't think you should have any problems moving fonts as you need them in and out of your system's fonts folder. You may need to restart programs to detect the new fonts.
I use a font manager but that's because Illustrator and all other programs that I use and know of are very poor when it comes to working with fonts. If a developer comes with a program specifically designed to make it easy to work with fonts that will be a killer app.

HT5835 - "A new security code must be created because of a change to iCloud Keychain servers" ?

Hi there,
Just got this message pop up on my iPhone - wanted to make sure it was genuine.
Clicking "Learn More" takes you to support.apple.com/HT5835 (which doesn't exist)
Can't find anything in the forums either?
Thanks

I have the same problem. I will be in the middle of reading or playing a game on my iPad and my iPad will restart then come up with the alert to create new iCloud security code because of a change in the keychain servers. The only other forum post I have found says it can happen when formatting your Mac hard drive but in my case no other devices are being used, it is seemingly random.

Must I create @me account to sync Notes?

I had not tried to do this before upgrading to Mountain Lion, but I have been unable to sync Notes (and Messages) between my iOS devices and my Macs since upgrading. Every time I go to enable Notes and Messages synching through iCloud on any of my devices, I am confronted with a window that asks me to create a @me email address in order to enable synching. Is this a requirement? Is there some other way to enable synching of Notes and Messages without having to create a new email address that I'll most likely never use? Am I missing something obvious here? I'm a Mac user since 1984 and an iPhone user since the very first iPhone 5 years ago. But this has me completely baffled.

Thanks, my main email address is an IMAP account. But whether it's on my Mac or my iPhone or iPad, when I go to settings and try to enable Notes or Messages synching, I get that pop-up window asking me to set up a @me account. Can you tell me how I can bypass that? I have been synching Calendars, Contacts, Reminders, and Bookmarks through iCloud, but Notes and Messages seem to involve another layer of complexity I just can't seem to get past.
Thanks for your help.

VI Store must be created like App Store

Hello,
I have a suggestion that there must be a centralized place of keeping all the VIs like the concept of App Store.
This would defintely help the users and increase the utilization of LabVIEW

Try the LabVIEW Tools Network.
LabVIEW Champion . Do more with less code and in less time .

MOUNTAIN LION, MBP RETINA : Time machine keeps saying to improve reliability, TM must create a new backup for you

Hello
I have a little network with 2 x Macpro, 1 x Macbook pro Retina, 1 x Mac Mini server and one DiskStation.
I have no problem to backup the two Macpro and the Macmini on the Diskstation
But I only have problem with my Macbook pro Retina.
I was told to start the 1st backup using Ethernet
After a few complemantary backup in WIFI I get the message :
I have done this MANY times
I have tried to repair the Backup file
THE PROBLEM IS ONLY WITH THE MACBOOK PRO RETINA IN MOUNTAIN LION
I had Apple support, answer : "no support because you are using a disk station" (I have used this diskstation since many years without ANY problem)
Looks like it is a WIFI problem !!!!
Thanks in advance for your help
Best
Cyril

Scott F wrote:
Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you.
Yes. See #C13 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
My Time Machine drive is a 500GB drive connected to an Airport Extreme via USB.
I hate to have to tell you this, but backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
You really should find a more reliable way to back up. See #2 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum) for your options.
I find this message confusing. Why must TM create a new backup?
As in the first link above, because they're damaged beyond Disk Utility's ability to repair them. Exactly what that is, we mere mortals don't know. It's only on network backups, and even folks using Time Capsules see this occasionally.

Create a site collection with dedicated content db with the help of server object model

Hi,
I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will create a content db and then create the sitecollection with contentdb
parameter with the created contentdb name.
Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
1) create a web template and include sp doclibs, splists , site columns in this.
2) i am thinking of a ui design to create the below:
These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects" aka
"site collections" and uploads the documents into these projects and collaborate.
so my question is : On click of a button can I create a site collection with a dedicated content db based on the web template created with the hel of server object model?
The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in server obj.model ?
passing a paramter from code behind- visual web part ui to power shell ?
and it should create the site collec based on the web template and create the content db.
my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

Try below:
http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
# Enable the remote site collection creation for on-prem in web application level
# If this is not done, unknon object exception is raised by the CSOM code
$WebApplicationUrl = http://dev.contoso.com
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null)
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
$webapp=Get-SPWebApplication $WebApplicationUrl
$newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
$newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
$newProxyLibrary.SupportAppAuthentication = $true
$webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
$webapp.Update()
Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
# Reset the memory of the web application
Write-Host "IISReset..."
Restart-Service W3SVC,WAS -force
Write-Host "IISReset complete."
If this helped you resolve your issue, please mark it Answered

How to create a F4 help for a report selection screen field

hi,
can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

hi,
Here are the following ways
1.with the help of match code objects we can create the F4 Functionality for Field.
Syntax is :
PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
2. One more thing is we can do it with Search Help's also.
3. Even we can do it HELP Views also.
Help Views:
You have to create a help view if a view with outer join is needed as selection method of a search help
The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

PR is must to create PO

Similar Messages

Maybe you are looking for