How to change the blog posts view when navigating through categories?

Hello, currently I've been struggling for a while with the following problem:
In my SharePoint blog site I have the following default view of posts:
http://s16.postimg.org/yvmu0j51x/Default_site.jpg
When I click on a category, I get the following view of posts:
http://s29.postimg.org/58lm8p993/Category_site.jpg
Is there any possibility to get the same way of showing post as how it looks on the default site? So with Image, with body etc. But then only filtered based on category.
Any help would be highly appreciated!
Regards,
Danny

Hi Danny,
No, my result is like:
You can do as the followings:
Edit the page
Insert the Categories list into the page
Insert the Posts list into the page
Edit the Posts web part, and switch the current view to Summary view, click OK
Click Connections->Get Filter Values from->Categories, like the screenshot below:
Provide Field Name:Title, Consumer Field Name: Category
Click Finish
Then you can filter posts based on a category by clicking Select in the first screenshot.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Similar Messages

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?
My ideal date format would be / 28, Oct, 2015
can anyone help? I'm not sure I can manipulate the {tag_postdate}

You can use something like this in the post or post list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

How to change the Discussion board view to facebook posting type view

hi friends..
i want to change the discussion board view to facebook posting type.Where multiple discussions and comments on single page as well as all the comments should be in a threaded view and also i want to find a new discussion
link in same page.
can any one help me...

Hi,
As I understand, you would like to improve discussion board to display all posts on a single page with comments.
There is no OOB option to customize discussion board. However, there are workarounds:
You could create a site with Blog site template, and it could meet your requirement. More information about Blog site:
http://office.microsoft.com/en-in/sharepoint-foundation-help/create-a-blog-HA010378201.aspx
You could use Note Board web part instead, and customize it to allow reply:
http://social.technet.microsoft.com/Forums/en-US/f7e466ee-ab53-47c5-9dd9-232e295bca6f/sharepoint-2010-note-board-web-part?forum=sharepointgeneralprevious
You could customize Discussion Board directly using Content Query Web Part and XSL:
http://sharepointsolutions.com/sharepoint-help/blog/2013/04/custom-discussion-board-rollup-using-content-query-web-part-and-xsl/
Regards,
Rebecca Tu
TechNet Community Support

How to change the default delivery day when i create a shopping cart?

hi,dear
i got some trouble when i was creating a shopping cart.
i want to change the default delivery day when i reference an old template.
pls see the pictures and take the details.
it seems that this forum dont support the [img][/img],so pls clike the link to open the picture.
if you cant see the picture ,pls tell me,thank you
step1:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119338649_0.jpg
step2:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119432170_0.jpg
step3:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119557507_0.jpg
step4:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111120079773_0.jpg
Edited by: ming yu on Sep 11, 2009 5:22 AM

Hello Ming,
Have a look at following thread concerning BAdI BBP_CHANGE_DEFAULT:
[Change the delivery date (Required on) of SC|Change the delivery date (Required on) of SC;
You will have to check in which SC transaction you are in order to distinguish creation from reference to old template.
Regards.
Laurent.

Hi, How to stop the open new view when i click button in OnClick event

Hi,
I have the popup window[window.showodelDialog] with one button called confirm.and table control values
Actual requirement: when i click confirm button it saves the tablecontrol value in the internal table. it is fine.It saves.
Currently working is : When i click the confirm button in the onClick event ,the new view is opening with empty tablecontrol popupin the new window.I don't want that one.
my requirement is: When i click the confirm button through onclick event ,i want to close the currently showing popupwindow and it should come to main page.How to do that?
view1.htm
=======
   <htmlb:button id            = "sub1"
        onClick =""
        text          = "Confirm" />
Do_handle_data
============
LOOP AT lt_form_fields INTO lw_form_field WHERE name CS
                                          't_confirm' .
    CALL METHOD /ds1/cl_mdm_tablecontrol=>populate_table(
                   EXPORTING
                     im_id      = 't_confirm'
                     im_request = me->request
                   CHANGING
                   ch_table   = me->r_asset_data->t_maintain ).
    EXIT.
    ENDLOOP.
t_maintain it stores the changed values.. It is fine..

Hi raja,
1.I have a main page like req_asset_create.htm. In this page one button called maintain. If i click the maintain button the popup window is opening using window.showModelDialog.
2. In this popup i have a Editable tableview and one button called confirm. User can edit the values. After editing he is clicking the confirm button.
3.when he click the confirm button two things should happen a)Popup should vanish and it should go to main page ie req_asset_create.htm.The editrd values should store in to the internal table (t_maintain).it is in model class.
What heppenings for me using this code
=============================
<%----
confirm -
--%>
    <htmlb:button id            = "con"
        onClientClick = "self.close();"
        text          = "confirm"
        onClick       = "confirm"/>
When i click the confirm button ->popup is closing ->thats 100% fine and again one new view is coming with popupdisplay values.This should not happen.
a)The server event is not happening.It should happen.
b) The edited values are not stored in the internal table..
Do_handle_data : for storing the edited tableview values
===========
confirm
LOOP AT lt_form_fields INTO lw_form_field WHERE name CS
                                          'con' .
    CALL METHOD /ds1/cl_mdm_tablecontrol=>populate_table(
                   EXPORTING
                     im_id      = 'tv1'
                     im_request = me->request
                   CHANGING
                   ch_table   = me->r_asset_data->t_maintain ).
    EXIT.
    ENDLOOP.
What should i do to happen for the server event to update the edited records.
How can i achieve? ow to control the new opening view?

How to change the "n/a" message when stock level unavailable

When and if a product is not inventory controlled or the in stock quantity is unknown, the "In Stock" tag on the product page will read "n/a".
How do I change the "n/a" message? Customer think that stock is unavailable but I want to replace the "n/a" message with "Available".

This isn't what I was asking.
"N/A" is shown when a product has no inventory listed which is different than being "out of stock". This is when a product has not been inventory controlled. In other words, the product's inventory has not been controlled by the system.

How to change the position of Views in IC webclient

Dear all,
Our requirement is to change the Views locations in IC Webclient Interface. like we want to see morefields view (BuAgmoreFieldViewset) in the place of Product Veiw in Identify accout work area.
In the same way in Interaction record we want to replace follow-up activity view has to be replaced with Interaction record partners view.
Kindly suggest me what sort of development is required for this requirement. How can we configure this in SAP?
Your valuable suggestions will be highly appreciated.
Best regards,
R. Sravanthi
Edited by: Sravanthi_Revella on Apr 19, 2009 2:46 PM
Edited by: Sravanthi_Revella on Apr 19, 2009 2:47 PM

There is no easy way or direct configuration to handle this . You need a complete knowledge of all concepts in IC WebClient Cookbook , essentially View , Viewset and how to make modification in standard viewset . Once that is done you will have to Handle the Navigation using the Navigation Link concept . Apart from that you will need BSP/ Object Oriented ABAP to handle the Object Node Instantiation either in the Inbound Plug etc so that your View Context Node and Attributes are populated to be display .

How to change the requested delivery date when approval has been done

Hi
We use SRM5.0 and we want to implement SC, now we want to make it possible to change the delivery date in the shopping cart when we approve.
This is needed if we request today but the approver didn't approve same day, therefore the requested day has to move the same number of days, that the approver has spend. Or else the deliver date will not be correct.
Do any of you know how to do this??
Best regards
Jakob

Hi Jakob,
What scenario do you use? Classic, Extended Classic, Standalone?
So depending on your scenario you can have differente types of follow-on documents (PR/PO only in ERP in case of Classic, or PO in SRMand ERP in case of Extended Classic).
Do you use Sourcing Cockpit?
I've tested this scenario in SRM 7.0 Standalone and if the follow-on document (in my case, a PO) is not "Ordered" yet then I can change the SC. But if it is already "Ordered", I can't change the SC. This is standard behavior.
You could use Sourcing Cocking to solve this issue, in this you don't use it yet.
Best regards,
Christian Zeuch

How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number. so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it. thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order. Go into the following menu: Edit > Deletion Flag > Set. Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path: Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data". This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

Tabular Forms - how to change the color of text when the field is disabled

Hi,
I have a tabular form and some of it's columns are disabled showing text in grey color...
is there a way to change the color to black and bold the text...?
thanks

Okay, i've taken a look at your example.
The column formatting does not work on the input fields. The help on the item says that it generates a span with a style attribute. This would work for a display field, not for an input field.
Css like i've written should be in the style tags, put up in the header section of the page (page -> edit -> header region).
You've already put script tags there, the style tags go there aswell. You shouldn't even need to put your script tags in the header region. Just put your code up in the javascript functions region (without the script tags).
However, i tested in firefox and here color works on an input field, changing the font color. In IE it does not do this. Cross browser implementations and such, not much to do about it here. See http://stackoverflow.com/questions/602070/changing-font-colour-in-textboxes-in-ie-which-are-disabled.
I did notice that you build your form with a bunch of input fields, which you disable through javascript in the footer of the region. Then on submit, you set the disabled to false again for all those fields! If you want those fields to always be submitted to the server, why wouldn't you use the readonly attribute? Readonly fields are always submitted, and can't be edited by the user. Plus, readonly fields CAN be styled however you want! You can get rid of the javascript code in your header then.
Even the javascript in the footer is not necessary. If you just add 'readonly="true"' (without single quotes) to the element attributes of your items (edit column -> column attributes region) = no javascript at all (less maintenance).

How to get the URL parameter value when navigating from JSP Page to portal

Hi All,
I have web Dynpro application with one button, while clicking that button It will navigate to JSP page as external window. In the JSP page I have a input field and Button.
In the JSP page input field I will enter some values and press submit button, it will navigate to Portal page by passing some URL parameter with values.
Once user entering to portal by default WD page displayed, the same WD page I try to get the URL Parameter which I have passed from JSP page, but I am not able to get the URL parameter value.
If same application running in without portal, I can able to get the URL parameter values. I am getting the URL parameter by interface view default inbound plug parameter.
How do we resolve this problem?
Regards,
Boopathi M

Hi
Please try these link might helpful for you
1.[How to call WebDynPro application from JSP |/thread/452762 [original link is broken];
2.[How to get the previous page url from abstract portal component? |/thread/1289256 [original link is broken];
3.[how to launch and pass a parameter |/thread/5537 [original link is broken];
Best Regards
Satish Kumar

How to change the font more visible when the field is masked

Hi experts,
In the web client we have a search view where some of the field is not editable so the search field value looked faded. My client want the font should be more visible and dark.

Hi Tarannum,
Not sure how you acheived greying out of attributes on search page
But, colours of font can be changed using skins.
/people/ingo.deck/blog/2009/01/23/the-eye-must-be-pleased-as-well-skins-with-crm-70
I did not work on this, just had an idea of this blog.
Regards,
Masood Imrani S.

How to change the order of fields when exported to csv

I am using LiveCycle Designer 8 and have created a great form with the correct tab order.
However, when the form is filled in and returned to me, the fields in the CSV file are all over the place. How can I make sure the fields in the CSV file are displayed in the same order as the tab order?

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

How to keep the new modified name when sendind through Mail?

Is there any way to keep the name I just modified in iPhoto when I send it via Mail directly from iPhoto?
I just tried and I see the original dscxxx name in the received email!
Thanks

nicohus
in a word, no.
But in the dialogue box that you get when you click the email button tick Include Titles and the email will have the Title attached to file, without renaming it. If you want the titles to become your File Names the only way to do this is to export the files from iPhoto, using the File -> Export -> Name: Use Title command, and then re-import the files to iPhoto.
Regards
TD

How to change the source ip address

hi all,
i got the problem that how to change the source ip address when i
get a website's page!
i mean i want to change the source ip address when i access the
remote website, sure i know when change the source ip, i can not get
the result correctly when changing the source ip address, but it is not
important to get the result i just want to send out a "click" event to the website by calling a post method in the site!
does anybody have some ideas?
Best Regards,
Eric Gau

Here's some code that connects to google and does a get:
import java.io.*;
import java.net.*;
public class HTTPTest {
    private Socket sock;
    private BufferedReader in;
    private BufferedWriter out;
    private boolean running = false;
    HTTPTest() {
    private void go(String site) {
        try {
            sock = new Socket(site, 80);
            in = new BufferedReader(new InputStreamReader(sock.getInputStream()));
            out = new BufferedWriter(new OutputStreamWriter(sock.getOutputStream()));
            System.out.println("Connected");
            out.write("GET / HTTP/1.1\r\n\r\n");
            out.flush();
            doRead();
        } catch (IOException e) {
            e.printStackTrace();
    private void doRead() {
        running = true;
        String line;
        System.out.println("Read started");
        while (running) {
            try {
                line = in.readLine();
            } catch (IOException e) {
                e.printStackTrace();
                line = null;
            if (line == null) {
                running = false;
            } else {
                System.out.println(line);
        System.out.println("Socket closed");
    public static void main(String [] args) {
        String site;
        if (args.length > 0) {
            site = args[0];
        } else {
            site = "google.ca";
        new HTTPTest().go(site);
}

How to change the blog posts view when navigating through categories?

Similar Messages

Maybe you are looking for