Pr price and Material price("Urgent")
Dear MM experts
Here in our plant, earlier we purchased one material from the foreign vendor with a price of 12000.00 INR each.
Now the same material is avilabe in Indian with a price of 150.00 INR earch.
My problem is:
When Im trying to create a PR, im getting the message
" PR rate cannot be less than material rate, material rate 12000.00, Pr rate is 150"
So how can I over come this problem, please suggest me any configuration is required.
For the same problem when I tried to create a pr in IDES version, It is allowing me to create pr lesser than the previous purchase.
Thanks in advance,
Hi Mr.Ranganath,
Accountin view 1 in MM02 transaction, is in non ediatable form, we cannot change the price in that field.
And as I told, In Ides version it is allowing to enter the price which is lower than that of the material price.
thanks for your response,
regards,
Govardhan,V.
Similar Messages
-
Very Urgent Extn.Material Group and Material Group.
Hi Guru's,
I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.Hi Manju & Gopi,
This Order Confirmations cube having data from 2 data sources.
There is a performence issue to clubbing so many tables.
Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna. -
PO Line Item wise gross value for combination of WBS and Material Group
Hello,
Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
Regards,
Milind DumbreDear Milind
No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
Warm regards
Ramakrishna -
Table for finding rate based on part code and material
Hi Experts
I am an ABAP consultant with ltd knowledge on SD . Please tell me in which table I can find the rate based on party code and material .Hi
The standard table is A305. But usually these tables can be customized based on the requirement. So if you are aware about the Condition type for which this Price/Rate is maintained you can find the same in VK13.
In transaction code VK13, maintain the condition type and click on "Condition information" icon. Now dont maintain any input date. Just click on Execute icon or F8. System will give the list of all the tables and data maintained based on the combination.
Select the required table.In SE11, maintain this table with prefix as A. You can get all the required information.
Regards
Vamsi -
Activate Direct Posting to G/L Accounts and Material Accounts
under configuration if we tick on "Activate Direct Posting to G/L Accounts and Material Accounts"
then what would be the impact?
Thanks & Regards
Nitin GuptaHi
When u tick "direct posting the material" material tab will be available in MIRO screen ( along with PO reference )
here u can post invoices w/o reference to PO directly material account
Check info Given by SAP
If you have activated posting to material accounts in Customizing, you can enter invoice lines without a PO reference on the Material tab page. These lines are then posted to the given material when you post the invoice
When posting directly to a material, no posting is made to a GR/IR clearing account. The system posts manually entered material lines directly to the stock account or a price difference account, depending on price control and stock coverage
Vishal... -
PO with both service and material
Dear all
Can anyone give a structure of PO which invoves both Service and Material component and both are inseperable.
Service tax is applicable on service portion and VAT is applicable on material.
Thanks in advancehi,
As per your requirement create PO with 2 line items
Line Item 10 for service : item cat D, a/assignment K , material group etc
select service master or text (at service details tab in item level)
select relevant tax code with service tax. (invoice tab)
line item 20
here enter material master, price, plant etc.
select appropriate tax code with VAT ( invoice tab)
save
say PO created 4500018024
Now When you receive the service perform service entry sheet (ML81N) for 4500018024 item 10
accept and save
When you receive the material perform MIGO for 4500018024 item 20
finally when you got the invoice
Perform MIRO against PO no ( no need to enter item ) and select Goods/Service items
It will select both line item simulate and post
and if you want to Perform MIRO separately then
in MIRO enter 4500018024 item 10
and then 4500018024 item 20.
that's it -
Valuation Area and Material master
Dear All,
Can anyone explain the relation between Valuation Area and Material Master.
According to my knowledge,Plant has relation with Material master.
SAP recommends Plant to be Valuation Area.
RegardsHi Venkat,
Valuation Area is the level at which u need ur Material to be valuated .
V have 2 options as :
1> Company Code
2> Plant
SAP recomends aat Plant level.
If u Company code is used then the Material is valuated at same price across whole company.
The decission of Valuation Area has to be done at configuration level.
And once done , it should not be changed ..............as SAP states
Thanks & Regards
Hope this helps
Edited by: Vicky B on Mar 12, 2009 10:35 AM -
Difference between Material Master and Material ledger
Can anyone tell me the difference if any between Material Master and Material ledger and its usage and interlink with SAP modules.
Thanks for your time
suresh aryaHi Suresh,
The application component Actual Costing/Material Ledger fulfills two basic objectives: The ability to carry material prices in multiple currencies/valuations, and actual costing.
The material master records are all information your company needs to manage a material is stored in a data record in the material aster, sorted by various different criteria.
For more information regarding the functionality, you can see in path below, help SAP...
Material Master data:
http://help.sap.com/saphelp_47x200/helpdata/en/03/abb8f85fbe11d396a600a0c930e0da/frameset.htm....
Material ledger:
http://help.sap.com/saphelp_47x200/helpdata/en/a2/5cd63835e211d38a710000e83234f3/frameset.htm..
Regards,
Paulo -
Difference between stock currency and material currency
Hi all,
I have noticed there is difference in Stock currency and Material currency in MB5L(List of stock overview). Both stock vaue should tally every month. But it is showing difference for the last month.
Could anybody help me how to find out this difference, I have checked the MR21 already, But there is no price difference.
Any suggestions????????
Tx,
VeenaHello,
Transfer posting may involve or not involve the physical goods transfer. In the system you might do transfer posting from quality to unrestricted, or from one store location to another.
In transfer posting you remove and or replace materials from storage in one storage location and place them in another storage location.
That transction code you use for transfer posting MB1B with following movement types may be used
301, 303,305,311,411,309.
301 is Stock Transfer Between Plants in One Step
303 & 305 : Stock Transfer Between Plants in Two Steps
In stock transfer, it always involves physical movement of goods, like transfer between plants under same company code or different company codes.
Following types are possible with STO's
Stock Transport Order Without Delivery
Stock Transport Order with Delivery via Shipping
Stock Transport Order with Delivery and Billing Document/Invoice
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
Please go through attach SAP document
BR,
Tushar -
Badi and Business event( Urgent)
Hi experts,
I am new to badi and business event 1120P. Please post how this business event exactly comes in to picture in this badi. also how to find this business event?
And also Post the logic or code. The requirement is given below . Pls Post the solution. Its very urgent.
Enhancement Summary
Two user exits are needed to determine the correct G/L Account and Cost Center on Shipment Cost documents and post the Material Group on the Accounting document. BADI_SCD_ACCTG and Business Event 1120P can be used to accommodate the new functionality.
Business Process
Specific G/L Accounts and Cost Centers have to be determined to post on the Shipment Cost document. This is needed to provide accurate management reporting capabilities on shipments for Sales Order or Stock Transfer Order. A new custom table must be created which contains the following information: Distribution, Mode of Transport, Account, Cost Center Material group. Distribution is an identifier here if this shipment originated from an SO or STO.
There are no screens involved in this enhancement.
Components
Table: ZTABLE1
Field Data Element Type Length Description
MANDT MANDT CLNT (key) 3 Client
DISTRIBUTION Z_DISTRIBUTION CHAR (key) 1 Distribution
MOT ZZDEF_MOT CHAR (key) 2 Mode of Transportation
MATKL MATKL CHAR (key) 9 Material group
SAKNR SAKNR CHAR 10 G/L Account Number
KOSTL KOSTL CHAR 10 Cost Center
This table gets updated manually by the FI team.
Values for Distribution are:
1 = Primary Distribution to Refinery
2 = Primary and Secondary Excluding refinery
All entries must be checked against SAP config and master tables
User exit BADI BADI_SCD_ACCTG will be used to determine the correct G/L Account, Cost Center and Product Group based on Distribution and Mode of Transport. This BADI gets called only when a new Shipment Cost document get created.
Once the BADI determined the new values it populates field c_vfkn-sakto with the G/L account, field c_vfkn-kostl with the Cost Center and exports the Product group to memory.
There is no field on the Shipment Cost Document to store the Product group. Therefore another mechanism must be used to get the Product Group on the accounting document.
Business Event 1120P can be used to import the Product group out of memory and put it on BSEG-MATNR. Structure BSEG_SUBST must be enhanced with field MATNR for this purpose.
Function, Rules, Exits Description of Functionality, Rules, Exits
BADI_SCD_ACCTG Business Add-In for Shipment Cost Account Assignment
Business Framework Business Event 1120P can be used to import the Product Group from memory and to populate field BSEG_SUBST-MATNR.
This event gets called from different places. It needs to be ensured that it only populates the value when it was called from BADI_SCD_ACCTG.
Custom Table A look-up Table needs to be maintained for Distribution, Mode of Transport, G/L Account, Cost Center and Material Group
Transaction code To maintain the new table
Append Structure To enhance structure BSEG_SUBST with MATNR
Business Add-In BADI_SCD_ACCTG can be used to determine the account assignments for a shipment cost item to set the G/L Account and Cost Center. All data needed to determine the new information gets provided in this BADI.
Logic:
Determine if STO or SO based on Document Category from internal table I_REFOBJ-VTRLP field VGTYP If is C then Distribution type is Sales Order (Primary and Secondary Excluding Refinery 2 ) else we need to check the receiving plant. If the receiving plant (I_REFOBJ-VTRLK field WERKS) is a refinery the Distribution type is Primary (1) else its a (Primary and Secondary Excluding Refinery 2 ). Refineries can be identified via Function Module ZPLANTCLASSIFICATION. The plant must be passed into Import Parameter IP_SAPPLANT and field INT_PLANTCHAR-ATNAM must be looked up with value SAPTYPE. If it exists and field ATWRT contains RFY, the plant is a refinery.
Product Group can be determined from the Material master through Material group field MARA-MATKL.
Mode of Transport will be passed in the BADI in VTRLK-OIC_MOT.
Select single entry from table ZTABLE1based on Distribution, Mode of Transport and Material Group. If nothing gets selected, error message No entry exists in table ZTABLE1for Distribution (distribution), MOT (MOT) & Mat. Group (material group) should be triggered.
Move ZTABLE1-SAKNR to c_vfkn-sakto and ZTABLE1-KOSTL to c_vfkn-kostl
The Material group must be exported to memory in BADI_SCD_ACCTG
The Material group must be imported from memory in Business Event BP1120P
Free Memory in Business Event BP1120P
This is VI01 Creation of Freight Cost Item screen
and also code for function module ZPLANTCLASSIFICATION below
FUNCTION zplantclassification .
""Local interface:
*" IMPORTING
*" REFERENCE(IP_SAPPLANT) LIKE AUSP-OBJEK OPTIONAL
*" REFERENCE(IP_CPSPLANT) LIKE AUSP-ATWRT OPTIONAL
*" REFERENCE(IP_SISLOC) LIKE AUSP-ATWRT OPTIONAL
*" EXPORTING
*" VALUE(EP_SAPPLANT) LIKE AUSP-OBJEK
*" VALUE(EP_CPSPLANT) LIKE AUSP-ATWRT
*" VALUE(EP_SISLOC) LIKE AUSP-ATWRT
*" VALUE(EP_OWNERSHIP) LIKE AUSP-ATWRT
*" VALUE(EP_SMISTYPE) LIKE AUSP-ATWRT
*" VALUE(EP_SPOTREF) LIKE AUSP-ATWRT
*" VALUE(EP_SUBTYPE) LIKE AUSP-ATWRT
*" VALUE(EP_SUPPLYREGION) LIKE AUSP-ATWRT
*" VALUE(EP_TYPE) LIKE AUSP-ATWRT
*" VALUE(EP_DISTAREA) LIKE AUSP-ATWRT
*" VALUE(EP_GEOGAREA) LIKE AUSP-ATWRT
*" VALUE(EP_HMF) LIKE AUSP-ATWRT
*" VALUE(EP_IATACODE) LIKE AUSP-ATWRT
*" VALUE(EP_IRSTCN) LIKE AUSP-ATWRT
*" VALUE(EP_OPSAREA) LIKE AUSP-ATWRT
*" VALUE(EP_PLANTSTAT) LIKE AUSP-ATWRT
*" VALUE(EP_PORTCODE) LIKE AUSP-ATWRT
*" VALUE(EP_REFAREA) LIKE AUSP-ATWRT
*" VALUE(EP_SAPTYPE) LIKE AUSP-ATWRT
*" VALUE(EP_MFGWARRANTY) LIKE AUSP-ATWRT
*" VALUE(EP_USERTYPE) LIKE AUSP-ATWRT
*" VALUE(EP_TRMCENTER) LIKE AUSP-ATWRT
*" VALUE(EP_TRANSCENTER) LIKE AUSP-ATWRT
*" VALUE(EP_FEIN) LIKE AUSP-ATWRT
*" TABLES
*" INT_PLANTCHAR STRUCTURE ZPLANTCLASSIFICATION OPTIONAL
*" EXCEPTIONS
*" NO_OBJEK_FOUND
*" NO_CPSPLANT_FOUND
*" NO_SISLOC_FOUND
*" NO_INPUT_FOUND
*" VALID_PLANT_NO_CHARACTERISTIC
*" ONE_TO_MANY_ISSUE
*" PLANT_NOT_FOUND_ZDEF_DELPLANT
*" UNKNOWN_ERRORS
FM Name: ZPLANTCLASSIFICATION
Created By : SYUB *
Description : Function Module to retrieve plant characteristics *
The function module has two capabilities:
1. Retrieve only the necessary characteristics
2. Retrieve the whole characteristics into an internal table.
Parameter Description *
In the future, if there is a new characteristic added to the
plant classification tables, the characteristic has to be added
to the list of the export parameters and the loop statement.
TABLES: ausp, cabn, ksml, zdef_delplant.
DATA: ws_objek LIKE ausp-objek,
ws_countchar TYPE i,
ws_countplant TYPE i.
*Internal table for SAP plant
DATA: BEGIN OF int_plant OCCURS 0,
plant LIKE ausp-objek,
END OF int_plant.
*sap plant code is the input parameter.Move objek, atnam, and atwrt to
*internal table PLANTCHAR using inner join of AUSP, CABN, and KSML to
*synch up the internal characteristic numbers throughout the 3 tables.
IF NOT ip_sapplant IS INITIAL.
SELECT auspobjek cabnatnam ausp~atwrt
INTO CORRESPONDING FIELDS OF TABLE int_plantchar
FROM ksml AS ksml
INNER JOIN cabn AS cabn
ON cabnatinn = ksmlimerk
INNER JOIN ausp AS ausp
ON ausp~objek = ip_sapplant
AND auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'.
*Checking the existence of ip_sapplant in the table, if it doesn't
*exist, raise the exception else if it exists, check if it has
*characteristic values.
IF sy-subrc NE 0.
RAISE no_objek_found.
ELSE.
DESCRIBE TABLE int_plantchar LINES ws_countchar.
IF ws_countchar LT 2.
RAISE valid_plant_no_characteristic.
ENDIF.
ENDIF.
*cps plant code is the input parameter. Move objek from table AUSP to
*ws_objek using inner join of CABN and AUSP to match up the internal
*characteristic numbers from the 2 tables.
ELSEIF NOT ip_cpsplant IS INITIAL.
SELECT ausp~objek
INTO TABLE int_plant
FROM ausp AS ausp
INNER JOIN cabn AS cabn
ON cabn~atnam = 'OLDCODE'
WHERE auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'
AND ausp~atwrt = ip_cpsplant.
*Checking the existence of ip_cpsplant in the table
IF sy-subrc EQ 0.
*Counting the number of SAP plants in the internal table int_plant
DESCRIBE TABLE int_plant LINES ws_countplant.
*Moving the values of objek, atnam, and atwrt to PLANTCHAR using objek
*from ws_objek.
IF ws_countplant EQ 1.
LOOP AT int_plant.
SELECT auspobjek cabnatnam ausp~atwrt
INTO CORRESPONDING FIELDS OF TABLE int_plantchar
FROM ksml AS ksml
INNER JOIN cabn AS cabn
ON cabnatinn = ksmlimerk
INNER JOIN ausp AS ausp
ON ausp~objek = int_plant-plant
AND auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'.
ENDLOOP.
*If there more than one SAP Plants, then raise an exception.
ELSEIF ws_countplant GT 1.
RAISE one_to_many_issue.
ENDIF.
ELSE.
SELECT SINGLE werks FROM zdef_delplant
INTO ws_objek
WHERE cpsloc = ip_cpsplant.
SELECT auspobjek cabnatnam ausp~atwrt
INTO CORRESPONDING FIELDS OF TABLE int_plantchar
FROM ksml AS ksml
INNER JOIN cabn AS cabn
ON cabnatinn = ksmlimerk
INNER JOIN ausp AS ausp
ON ausp~objek = ws_objek
AND auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'.
if sy-subrc ne 0.
raise plant_not_found_zdef_delplant.
endif.
ENDIF.
*cps plant code is the input parameter. Move objek from table AUSP to
*ws_objek using inner join of CABN and AUSP to match up the internal
*characteristic numbers from the 2 tables.
ELSEIF NOT ip_sisloc IS INITIAL.
SELECT ausp~objek
INTO TABLE int_plant
FROM ausp AS ausp
INNER JOIN cabn AS cabn
ON cabn~atnam = 'SISLOC'
WHERE auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'
AND ausp~atwrt = ip_sisloc.
*Checking the existence of ip_sapplant in the table
IF sy-subrc EQ 0.
DESCRIBE TABLE int_plant LINES ws_countplant.
*Moving the values of objek, atnam, and atwrt to PLANTCHAR using objek
*from ws_objek.
IF ws_countplant EQ 1.
LOOP AT int_plant.
SELECT auspobjek cabnatnam ausp~atwrt
INTO CORRESPONDING FIELDS OF TABLE int_plantchar
FROM ksml AS ksml
INNER JOIN cabn AS cabn
ON cabnatinn = ksmlimerk
INNER JOIN ausp AS ausp
ON ausp~objek = int_plant-plant
AND auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'.
ENDLOOP.
*If there more than one SAP Plants, then raise an exception.
ELSEIF ws_countplant GT 1.
RAISE one_to_many_issue.
ENDIF.
ELSE.
SELECT SINGLE werks FROM zdef_delplant
INTO ws_objek
WHERE sisloc = ip_sisloc.
SELECT auspobjek cabnatnam ausp~atwrt
INTO CORRESPONDING FIELDS OF TABLE int_plantchar
FROM ksml AS ksml
INNER JOIN cabn AS cabn
ON cabnatinn = ksmlimerk
INNER JOIN ausp AS ausp
ON ausp~objek = ws_objek
AND auspatinn = cabnatinn
AND ausp~mafid = 'O'
AND ausp~klart = 'Z01'.
if sy-subrc ne 0.
raise plant_not_found_zdef_delplant.
endif.
ENDIF.
ELSE.
*Checking if there is an input parameter entered.
RAISE no_input_found.
ENDIF.
Modified 7/30 by RFOR to validate SAP plant is in plant master
data: wa_t001w like t001w.
read table int_plantchar.
SELECT SINGLE * from t001w into wa_t001w where
werks = int_plantchar-objek.
if sy-subrc ne 0.
raise NO_OBJEK_FOUND.
endif.
*Moving all the characteristic values to the export parameters
LOOP AT int_plantchar.
MOVE int_plantchar-objek TO ep_sapplant.
CASE int_plantchar-atnam.
WHEN 'OLDCODE'.
MOVE int_plantchar-atwrt TO ep_cpsplant.
WHEN 'SISLOC'.
MOVE int_plantchar-atwrt TO ep_sisloc.
WHEN 'OWNERSHIP'.
MOVE int_plantchar-atwrt TO ep_ownership.
WHEN 'SMISTYPE'.
MOVE int_plantchar-atwrt TO ep_smistype.
WHEN 'SPOTREF'.
MOVE int_plantchar-atwrt TO ep_spotref.
WHEN 'SUBTYPE'.
MOVE int_plantchar-atwrt TO ep_subtype.
WHEN 'SUPPLYREGION'.
MOVE int_plantchar-atwrt TO ep_supplyregion.
WHEN 'TYPE'.
MOVE int_plantchar-atwrt TO ep_type.
WHEN 'DISTAREA'.
MOVE int_plantchar-atwrt TO ep_distarea.
WHEN 'GEOGAREA'.
MOVE int_plantchar-atwrt TO ep_geogarea.
WHEN 'HMF'.
MOVE int_plantchar-atwrt TO ep_hmf.
WHEN 'IATACODE'.
MOVE int_plantchar-atwrt TO ep_iatacode.
WHEN 'IRSTCN'.
MOVE int_plantchar-atwrt TO ep_irstcn.
WHEN 'OPSAREA'.
MOVE int_plantchar-atwrt TO ep_opsarea.
WHEN 'PLANTSTAT'.
MOVE int_plantchar-atwrt TO ep_plantstat.
WHEN 'PORTCODE'.
MOVE int_plantchar-atwrt TO ep_portcode.
WHEN 'REFAREA'.
MOVE int_plantchar-atwrt TO ep_refarea.
WHEN 'SAPTYPE'.
MOVE int_plantchar-atwrt TO ep_saptype.
WHEN 'MFG_WARRANTY'.
MOVE int_plantchar-atwrt TO ep_mfgwarranty.
WHEN 'USER_TYPE'.
MOVE int_plantchar-atwrt TO ep_usertype.
WHEN 'TERMINALCENTER'.
MOVE int_plantchar-atwrt TO ep_trmcenter.
WHEN 'TRANSPORTATIONCENTER'.
MOVE int_plantchar-atwrt TO ep_transcenter.
when 'FEIN'.
move int_plantchar-atwrt to ep_fein.
ENDCASE.
ENDLOOP.
ENDFUNCTION.
Pls help me out from this problem its very urgent.
Thankshi SK ,
process like this .
in BADI
method.
1.Here u have to put ur logic based on the Requirement.
2.then u have to call BTE like this
<b>call function 'OPEN_FI_PERFORM_00001020_E'
tables
t_bseg = xbseg
t_bkpf = xbkpf.</b>
3.Update Ztables.
endmethod.
this is sample logic only.First get logic of TS then u will come to know how to do?
regards
prabhu -
How can I deactivate the pricing date and material pricing group in VA01?
Hello All,
How can I deactivate (output only) the pricing date and material pricing group field in VA01/2, VA21/2, and VA41/2? What user exit can I use? Thanks in advance...
PeeJayYou can use the t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry 'pricing date' or VBKD-PRSDT make the necessary changes and save.
The system will prompt to assign a package and request enter the necessary values.
Your issue is sorted!!
Regards,
PATHIK -
J_1HSTCD -Stock card and material inventory Document needed
I need some documentation for report J_1HSTCD -Stock card and material inventory report.
Does any body know more about this.
No TC is assigned.
Its urgent!!!!!!!!!
Regards,
Vibhutiresolved
-
What are the precautions to be taken while archiving the POs' and Material
Hi All,
I want to archive the Purchase orders and Material documents. Is there any standard rule to follow this procedure. What are the further consequences for the consecutive documents. And how do you check the open POs' of all.
I have archived PRs' and Invoices, but these are not interlinked.
Could you please help me in this, so that I will be very much thankful to you.
Regards,
RamDear Ramesh,
Go to Tcode ARCHGUIDE --> Application Specific analyses and setting --> MM -->MM_EKKO and MM_MABTEL
You can tick on the documentation and link to SAP help for all the guide and need for this archiving.
Regards,
w1n -
Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet -
PO number and material issued against this PO for subcontracting
How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya. -
How to find the Open sale orders till date for given plant and material ?
Hi experts,
I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
AshwinHi Ashwin,
You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran
Maybe you are looking for
-
IMac and Video: 4GB vs 8GB RAM
Hi all, long-time Mac user, first-time poster here. It's time to upgrade the old 2003 G4 MDD with a new platform. A Mac Pro is really expensive right now, so am looking at a 2.93GHz Intel Core 2 Duo, with 4GB of RAM and the ATI Radeon HD 4850 card. I
-
My 8-hour-old-iPhone-4 doesn't have any these... Has anyone seen these issues?
-
i am trying desperately to set up php and can't get there without some serious help on one issue. ive gotten php, phpmyadmin, mysql, and apache running. BUT i can't figure out how to get rid of the following warning that appears on the phpmyadmin hom
-
Hi, I extended a VO by modifying its query to the following: SELECT * FROM (select ptv.project_number, ptv.project_id, ppp.organization_id, ptv.task_number, ptv.task_name, ptv.task_id from pjm_project_parameters ppp, pjm_tasks_v ptv, csi_item_instanc
-
How to find whether MI is installed in my landscape?
Hi I would like to know, how/where can I check whether my landscape has mobile infrastructure components got installed or not? I've seen in sld - products where mdk all versions are there. Is it require to take any post installation steps for utilizi