PRCD-1135 : There is no listener defined for network

When trying to add service to the cluster it giving error.
{oracle}107: srvctl add service -d ORCL -s abc11 -r ORCL1,ORCL2,ORCL3 -P BASIC -y AUTOMATIC -e SELECT -m BASIC -z 3 -w 1
PRCD-1135 : There is no listener defined for network 10.16.144.0/255.255.252.0 to be used by service abc11
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node3

941119 wrote:
When trying to add service to the cluster it giving error.
{oracle}107: srvctl add service -d ORCL -s abc11 -r ORCL1,ORCL2,ORCL3 -P BASIC -y AUTOMATIC -e SELECT -m BASIC -z 3 -w 1
PRCD-1135 : There is no listener defined for network 10.16.144.0/255.255.252.0 to be used by service abc11
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node3srvctl status LISTENER
srvctl config LISTENER
srvctl config SCAN
srvctl config SCAN_LISTENER
There is still a regular LISTENER in addition to the SCAN_LISTENER
also how do you have remote/local_listener configured?
Please review: http://www.oracle.com/technetwork/products/clustering/overview/scan-129069.pdf

Similar Messages

"The file could not be opened, there is no handler defined for it"

Hi,
Sorry if my question is not appropriate for this group.
I added a media file(.wmv)in one of the folder of my Web Application,if I try to open from Weblogic Workshop the message "The file could not be opened, there is no handler defined for it", if I added like a reference in a jsp file
<a href = "/Begin/videos/movie_0001.wmv">movie </a>
the browser (The test one or Internet Explorer)open is like "strange" text.
Any help is appreciated.
Thank you,
Mariana

Hello Mariana,
It looks like workshop simply does not support this file extension, I would raise a support case with bea to see if workshop does suppport it or not, or if there are any plans for supporting it in the future.
Cheers
Hussein Badakhchani
www.orbism.com

Is there a way to test for network connectivity (and a way to simulate it)

Is there a way to test for network connectivity, which API to look into? Also, is there a way to test that code in the simulator, that is, to turn off the network in the simulator.
Thanks

A peek in the docs would help- there is a TON of information there.
You might also try the Reachability sample app for ideas:
http://developer.apple.com/iphone/library/samplecode/Reachability/index.html

Is there any time out defined for long running transaction?

hi,
i have to make one big data transferring script , though transaction is not required here, but i was planning to,
please tel me is there any time out for long running transactions.i have to run the script from database it self
yours sincerley

Can you show us an example of your script? You can divide the transaction into small chunks to reduce time and locking/blocking as well.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I bought an IPhone 3gs and tried to reset the APN but when I click on settings then General they tell me to click on the "Network" tab but there is not a tab for "Network"? After Network, I was supposed to go to Cellular Data Settings?

I bought an IPhone 3gs and tried to reset the APN through Strait Talk Wireless but when I click on settings then "General" tab they tell me to click on the "Network" tab but there is not a "Network" tab? After Network, I was supposed to go to Cellular Data Settings but I can't find the Network tab under the General tab. I watched videos and every IPhone I saw had the Network tab but mine don't, can anyone please help this old man fix this new technology, so I can use the Internes and MSM?Thanks, jerry b <><

Hey electrikn,
Thanks for the question. If your iPhone 3GS has been updated to iOS 6, this setting had moved:
Set network options: Go to Settings > General > Cellular
via http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thanks,
Matt M.

Is there a way to mass unteco for network

Hi all,
Please advice . Is there any tcode to mass unteco for network under a project ? without going line by line in project builder? or open the project one by one?
Please advice.
Thank you.
Nies

Nies,
I´m afraid there is no such tool. It is not possibile to affect status via mass maintenance actions.
In the project builder you can consider selecting all the networks from a single project in the network overview and changing the status of all of them together.
You can reach this network overview from the Project Definition detail screen.
There is no such workarround for networks belonging to different projects.
I hope this clarifies.
Best regards
Martina

My iPod touch is a model MB528LL running version 4.2.1. I would like to download the At Bat 12 App (the $14.99 version) so I can listen to professional baseball games this year. Will there be an app. available for my iPod?

My iPod touch is a model MB528LL and runs version 4.2.1. I would like to download the At Bat 12 app. (the $14.99 version) so I can listen to professional baseball games this year. Will there be an app. available for my iPod this year?

I went to the link you posted and followed all the steps. I was thrilled to see that it worked! I don't recall whether my PC still recognized my iPod Touch as a camera or not, but DEVICES did show up in iTunes and it recognized the name of my iPod Touch.
Now, though, everything is back the way it was. The PC tells me I have a camera connected via USB and iTunes doesn't even have DEVICES listed in the left-hand column.
I'm wondering if this is the problem: I had the iPod on until the battery was so "low" that it stopped. I didn't press and hold the button on top. In fact, until I read the article you linked to, I didn't even know you could turn the iPod on and off that way. I would only press it once until the screen turned blank and simply pressed the Home buttom to turn it back on. Until I read that article, I thought the Home button was the On button.
So now my question is this: Should I ALWAYS turn the iPod off by pressing and holding the button on top until I see the red slider on the screen?
Thanks!

Is there a way to define a layer for dynamic objects?

Hi all. Basically, I'm creating a number of dynamic text field objects in my Actionscript, but it looks like its being rendered on the wrong layer. I've written the actionscript in the first frame of my 3rd layer (which is masked), but the objects that are rendered dont appear to be affected by the masking effect (that does work with static objects). Is there a way to define programatically which layer an object is rendered in? Something like layerNo.stage.addChild(object)?

first, you have the command 'addChildAt(child, index)'
thought i'm not sure if that would solve your problem. in order to mask dynamic text you have to embed its fond, by setting the textfield's property 'embedFonts' to true.

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

How can I make a book/podcast listening playlist for a blind person?

How can I make a book/podcast listening playlist for a blind person? How can lots of content be loaded, so that no navigation is required, for hundreds of hours of enjoyment?
I wanted to create a single playlist with hundreds of hours of books and podcasts for my grandmother who is blind. Then I planned to use something like the app CarTunes which basically makes the touch screen simply a gigantic pause/play button for an already created playlist. This is perfect for a blind person. The problem: Apple no longer allows you to have a playlist with Audible Books and Podcasts. I have tried; but the podcasts and books are stripped from the playlist. It seems like all podcast and book players require navigation. (How aggravating!?)
Any help in creating hundreds of hours long spoken (selected between books and podcasts) audio content playlist for a blind person would be much appreciated!!!!

Well, good news and bad news. I found out how to tell iTunes that all my music videos are, in fact, actual "music videos" and categorize them as such. In the "Get Info" screen for a track, there is a dropdown selector where you can pick the "meta" type, such as "Music Video", "Home Video", "Movie", "TV Show", etc. This allows iTunes and iOS to think they are all music videos and play them in the same list.
Unfortunately, this is not compatable with my third party device, which is now refusing to play my music videos in a playlist and will only play them one at a time (in a single-track infinite loop no less). Very frustrating!

Excise modvat accounts not defined for GRPO transaction and 58 Excise group

Hi Experts,
When i am doing Goods receipts for Depot for Subcontracting
i am getting this error message .Excise modvat accounts not defined for GRPO transaction and Excise group. For Depot no modvat. is there any configuration setting for depot. Please do needful.

Hi,
Please maintain
Hi,
go to SPRO
Specify G/L Accounts per Excise Transaction
SPROLogistics u2013 GeneralTax on Goods MovementsIndia Account Determination  Specify G/L Accounts per Excise Transaction
Enter excise group -58
ETT_ GRPO
and G/L account
G.Ganesh Kumar

VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

i am learning SAP PP and i hv ides 4.7,
now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
analysis of error gives following message:
Activation of the indicator is not permitted
Message no. KT253
Diagnosis
You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
Note
The following should be taken into account when maintaining a version:
In general version definition you decide whether a version is allowed for
     Panning (with the Plan indicator)
     Actual data update (with the Actual indicator)
Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
     A data version from results and WIP determination manages (indicator WIP)
     Another version from variance determination manages (indicator Variance)
     A version for exclusive use (field exclusive application)
You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
To set indicators WIP/Results- or Variance-determination the following conditions apply:
     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
     If the actual indicator is active, then both indicators must be activated
Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
     The actual indicator may not be activated in version 1.
If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
3. You want to maintain version 0 or 1. The restrictions outlined above apply.
Use the "Extras" menu option to display the structure of the entries in the complex data object version:
     Select a version and choose Extras -> Version use.
The SAP System shows which controlling areas use this version.
     Select Extras -> Versions in CO area
This displays all versions used in the current controlling area.
The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
Procedure
Do not activate the indicator, or change the higher order of settings in the general version definition.

Raj,
What are you trying to change?
To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
Regards,
Prasobh

Error in iTunes when I'm wanting to put a CD on my iPod to listen to for a short time

Hi,
My iTunes has been playing games with my mind. It makes me think that my iPod is full and it's not 'cause I have been taking off CDs and putting on just the CD that I want to listen to since my iPod can't handle much more since it's near full. Whenever I want to put a CD on my iPod that isn't on there yet I get this weird lookin' error in iTunes when I'm wanting to put a CD on my iPod to listen to for a short time. This is what it reads: "iTunes could not copy "song" to the iPod "Liz's iPod" because an unknown error has occurred (-50). See, my iPod can't hold too many more of my new CDs so what I'm having to do is when I want to listen to one of the new ones I can put it on, listen to it, take it off and put another new one on which I don't mind doing, but this error that I am receiving has been annoying me for a long time. I'm hoping somebody knows something about this 'cause my iPod is not full at all since I'm trying my best to keep it from getting there. One other thing, I rip my CDs in 192 and VBR. My iPod has AAC on there as well, but those are just my converted music downloads that I have downloaded over the years, but the AACs aren't the case. Just my ripped CDs. Does anybody know what this error is telling me?
Thanks,
Liz

Nevermind, I figured it out this morning. The CDs that I have ripped in 192 all load up good without errors and I just have to drag CDs that are ripped in VBR by transferring 2 songs at a time to get it all loaded up. That is weird, but thank goodness it had nothing to do with iTunes. I was just confused... that's all.

There is already a transaction for the systems of this product version(MOPZ)

Hello All,
I am trying to configure maintenance optimizer in Solution Manager 7.0
on Windows 2003 server and SQL 2005 server.
I am configuring this for SAP CRM 2007 server.
Created the server, database and system in SMSY
Created Logical Component in TA code SMSY
SM59 connection for SAP-OSS is OK.
S-User is assigned to a User.
Created a solution using TA code solution_manager.
Defined the product version for the solution created in the TA code
solution_manager.
When creating a Maintenance Optimizer transaction, I select the
product version and its logical component in the Plan Maintenance
(Phase) and click on Continue to go to Select Files Phase, I get below
warning:
Information Procedure 8000000130 Saved
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
I cannot get pass this phase.
I have deleted and recreated the solution, carried out the same
activity again but its giving the same Warning
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
Any help will be appreciated???
Regards,
Satish.

Hello Ragu,
Thanks for your response.
As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
I was successful in configuring CRM and SOLMAN.
But when I tried to configure in ECC, it failed due to RFC erros.
So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
Please let me know if you need further information.
Regards,
Satish.

While creating sales order got error version "0" is not defined for company

Hi,
i got a error while creating a sales order(va01) ,i got an error
saying that "version 0(zero) is not defined for company code
if there is any solution please provide....
Thanks&regards
kishore kumar

Go to TCODE:OKEQ
1)select version 0 here and ext select settings for each fiscal year under controlling area settings
2)give your controlling area XXXX and version 0 then enter
3)select new entries maintain data for new year 2008.
Hope this will give u
Sri

PRCD-1135 : There is no listener defined for network

Similar Messages

Maybe you are looking for