Pre-requisites and steps for uploading chart of accounts in sap r/3

Hi,
I am a fresher in SAP FI. I have a completly new set of Chart of Accounts which i need to upload in the system. How do i do it and are there any pre-requisites for the same i.e variants to be defined and assigned completly before uploading the Chart of Accounts.
I have heard of LSMW , but then how do i use it can anybody help me on the same.
Thanks
Poornima

Hi,
Yes, you need to define first the chart of account name and it should be assigned to the company code in OBY6.
Please refer below thread:-
[Upload Chart Of Accounts - Indian Localisation;
Regards,
Gaurav

Similar Messages

Pre requisites and steps for BI content installation.

Hi ,
We need to install Complete BI content in our production system , I am aware of the steps to be exeuted in SPRO but wanted to know the complete procedure step by step .
1) what are the pre requisites and checks before and after doing activation in SPRO .
2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue .
3)Can we do activation directly in Production ?
Thanks,
Neetika.

Hello Neethika, for your second question
2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue
If the object which you are going to install is already active and if it is customised, and if you go for reinstallation, new standard object will reinstall the already customised existing oblect. However, if you select the check box MATCH (X) or COPY and do the installation, object will be activated with retainging customisation. so there will be no need to customise it again.
It is always recommended to go for manual collection of objects rather then automatic collection, because there might be wierd chances that all the objects might not get activated and this will cause a problem while you move the same from DEV to PRODUCTION.
feel free write if any further clarication need
Thanks

Pre-requisites and steps to configure ChaRM and SDA

HI ,
We are implementing the Solman EHP1 with configuration of ChaRm and SDA , I need pre-requisite to configure ChaRm and SDA . Request your help on this .
Thanks,
Om

hi,
best way to start charm using this forum
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
and other related links for charm scenarios are here on this wiki
http://wiki.sdn.sap.com/wiki/display/SM/WeblogsrelatedtoSolutionManager check out the below topics
Change Request Management scenario: Usual questions
Change Request Management scenario: Working examples
Change Request Management scenario: Working examples "Development without Release" phase
Change Request Management scenario: Working examples "Development with Release" phase
Change Request Management scenario: Working examples "Test" phase
Change Request Management scenario: Working examples "Emergency Correction" phase
Change Request Management scenario: Working examples "Go-Live" phase
Change Request Management scenario: Working examples "Being Completed" and "Completed" phase
Change Request Management scenario: Working examples Final Points and Appendix
Thanks
Jansi

Any comprehensive STEP-BY-STEP for uploading my ORIGINAL albums and singles to iTunes?

Any comprehensive STEP-BY-STEP for uploading my ORIGINAL albums and singles to SELL over iTunes?
This are all original (C)All rights reserved music, and I want it to be available over iTunes to sell as tracks or full album.
Thanks!

HelliXSystems wrote:
But this are companies.
Yes, they will do everything needed to get your music into iTunes. It is far easier to do it this way.
Most simply charge a small flat rate (~$10 a song, $40 an album).
If you want to do it yourself, you will need to register with Apple.
You will need to have at least 20 albums in yoru catalog.
See this -> https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wo/2.0.0.9.7.3.1.1
(emphasis mine)
The requirements to work directly with Apple are listed below. If you do not meet all of these requirements, you can work with an Apple-approved aggregator instead. Aggregators are third parties that can help you meet technical requirements, deliver and manage your content, and assist with marketing efforts.
Technical Requirements:
A Mac running OS X 10.5.8 or later
At least 512 MB RAM
QuickTime 7.0.3 or later. This is so you can encode and deliver content using our dedicated software.
For optimal performance, use an Intel-based Mac running Mac OS X 10.5 or later. However, PowerPC G4 and G5 are also supported.
At least 20 GB of available hard drive space (more for larger catalogs) is recommended.
A broadband internet connection with an upload rate of 1 MB/sec or faster is recommended.
To deliver music video or concert film content to the iTunes Store, you must use an Apple-approved encoding house. Encoding houses typically charge fees for their services. Learn more about the differences between encoding houses and aggregators.
Content Requirements:
At least 20 albums in your catalog
UPCs/EANs/JANs for all products you intend to distribute
ISRCs for all tracks you intend to distribute
Financial Requirements:
A U.S. Tax ID
A valid iTunes Store account, with a credit card on file
Apple does not pay partners until they meet payment requirements and earning thresholds in each territory. (This means you will not get paid until you sell a certain minimum amount of content) You should consider this before applying to work directly with Apple as you may receive payments faster by working with an Apple-approved aggregator.
If you meet these requirements and wish to apply, click Continue.
Note: Meeting these requirements and submitting an application does not guarantee that Apple will work directly with you. You may still be referred to an Apple-approved aggregator.
Interested in working through a third party to sell content on the iTunes Store? Contact an Apple-approved aggregator.

Pre-requisite packages required for Oracle R11i

Hi Gurus,
I am new to DBA.I am working with oracle 11i cloning.In that task is to pre-clone from source system(os:Red Hat-4.0) and do post clone in target system in which I installed new os(os:Red Hat-4.0).
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages.
Could you please help me.
Thanks
Vinoth

Hi;
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages. Imagine you are making new installation on your target server. So you need to check all pre-req which is mention in below notes. You need to have all rmp hosts file edit and some other steps.
Please see:
Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01 [ID 287453.1]
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
PS: I suggest also see my blog http://heliosguneserol.wordpress.com/2010/05/31/cloning-oracle-applications-release-11-and-12/
Regard
Helios

Hi All,Pre-requisite of using FOR ALL ENTRIES

Hi All,
         What are the Pre-requisite of using FOR ALL ENTRIES in the select statement .pls its Urgent .
thanks&regards.
Bharat

hi,
For using for all entries in below statement for all entries in itab_mara it will retrieve record corresponding fields of table itab_marc.
In this case if we have duplicate records in mara .For that also it will retrieve the value in itab_marc.
select matnr erdat from table itab_mara where matnr in s_matnr.
if not itab_mara is initial.
select matnr werks from table itab_marc for all entries of table itab_mara
                                                      where werks in s_werks and
                                                                matnr in s_matnr.
Reward with points if helpful.

Please send detail steps for uploading legacy data

Hi friends,
please send detail steps for uploading legacy data
Thanking u in advance,
Diwa.

HI U CAN USE LSMW TO UPLOAD LEGACY DATA
LSMW is used for migrating data from a legacy system to SAP system, or from one SAP system to another.
Apart from standard batch/direct input and recordings, BAPI and IDocs are available as additional import methods for processing the legacy data.
The LSMW comprises the following main steps:
Read data (legacy data in spreadsheet tables and/or sequential files).
Convert data (from the source into the target format).
Import data (to the database used by the R/3 application.
But, before these steps, you need to perform following steps :
Define source structure : structure of data in the source file.
Define target structure : structure of SAP that receives data.
Field mapping: Mapping between the source and target structure with conversions, if any.
Specify file: location of the source file
Of all the methods used for data migration like BDC, LSMW , Call Transaction which one is used most of the time?
How is the decision made which method should be followed? What is the procedure followed for this analysis?
All the 3 methods are used to migrate data. Selection of these methods depends on the scenario, amount of data need to transfer. LSMW is a ready tool provided by SAP and you have to follow some 17 steps to migrate master data. While in BDCs Session method is the better choice because of some advantages over call transaction. But call transaction is also very useful to do immediate updation of small amout of data. (In call transaction developer has to handle errors).
SO Bottom line is make choice of these methods based of real time requirements.
These methods are chosen completely based on situation you are in. Direct input method is not available for all scenario, else, they are the simplest ones. In batch input method ,you need to do recording for the transaction concerned. Similarly, IDoc, and BAPI are there, and use of these need to be decided based on the requirement.
Try to go through the some material on these four methods, and implement them. You will then have a fair idea about when to use which.
LSMW Steps For Data Migration
How to develop a lsmw for data migration for va01 or xk01 transaction?
You can create lsmw for data migration as follows (using session method):
Example for xk01 (create vendor)
Initially there will be 20 steps but after processing 1 step it will reduced to 14 for session method.
1. TCode : LSMW.
2. Enter Project name, sub project name and object name.
    Execute.
3. Maintain object attributes.
    Execute
    select Batch Input recording
    goto->Recording overview
    create
    recording name.
    enter transaction code.
    start recording
    do recording as per ur choice.
    save + back.
    enter recording name in lsmw screen.
    save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
    Here you have to enter the name of internal table.
    display change
    create
    save + back
3. MAINTAIN SOURCE FIELDS.
    display change
    select structure
    source_fields->copy fields.
    a dialogue window will come .
    select -> from data file
    apply source fields
    enter No. of fields
    length of fields
    attach file
    save + back
4. MAINTAIN STRUCTURE RELATIONS
    display change
    save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
    display change
    click on source field, select exact field from structue and enter
    repeat these steps for all fields.
    save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
    execute
    save + back
7. SPECIFY FILES.
    display change
    click on legacy data
    attah flat file
    give description
    select tabulatore
    enter
    save + back
8. ASSIGN FILE
    execute
    display change
    save + back
9. IMPORT DATA.
    execute
    display change
    save + back
10. DISPLAY IMPORTED DATA
      enter ok, it willl show records only.
      back
11. CONVERT DATA
      execute
      display change
      save + back
12. DISPLAY CONVERTED DATA
      execute
      display change
      save + back
13. CREATE BATCH INPUT SESSION
      tick keep batch input folder
      F8
      back
14. RUN BATCH INPUT SESSION.
      sm35 will come
      Object name will be shown here
      select object & process

Pre-requisite before going for training to customise sap business one.

what are the pre requisite before going for training to customise sap business one according to our requirements...I am going for training on SAP business one to Germany

Hi
In SAP B1 there is only 3 Modules.
1 Technical Basic Knowldege in Programming in Visual Studio
2 Accounting
3 Logistics
2 & 3 are Functional Consultant. Basic Knowledge in Business Management is Enough.
SAP B1 is easy to learn and Understand.
You can Manage. Well
Regards
Srini

Upload Chart Of Accounts - Indian Localisation

Hi
Pls help me how to upload chart of accounts . Any document on that.
Thanks

Hi Manish,
The key thing is whether you have segmented accounts or not. If you do, only populate the FormatCode field and leave the AccountCode blank (SAP assigns this value once a segmented GL is added/imported); otherwise populate the AccountCode.
As Joseph mentions, follow the CoA DTW template. There are Comments that have useful information, including valid values for fields that require specific value.
One suggestion: break up your files by level - ex. import your level 2 GLs then level 3, etc. It's much easier to troubleshoot if you get an error message.
Heather

Account determined for entry (chart of accounts no) WRX 0003 not possible

HI, I'm trying to GR a PO for a material using movement type 101 and am getting the following error
"Account determined for entry (chart of accounts no) WRX 0003 not possible"
I know that I need to go to OBYC to make an entry for transaction WRX for valuation group code 0003 and valuation class and then assign it to the relevant gl.
My problem is I don't know what the valuation class should be. In the PO there is short text entered for the item rather than a material number so I cannot go to the material master to check what valuation class is assigned. Is it linked anywhere to the material group?
Thanks in advance for your help

yes u can do
fist
u can make the entry and blank valuation class and give the gl account in wrx
so that it will take this GL account for blank materia number
or
u cna give valuation class to material group
MM purchasing -- materal master -- Entry Aids for Items Without a Material Master
hope this helps

Obyc for country chart of account

Hi,
what is setting required for obyc for country chart of account. I have already assigned country chart of account number in operative chart of account- Comapny code section.
CHEERS

Dear Nitin,
You can not assign an 'Alternative Account' of Country Chart of Accounts in OBYC, neither no additional customization settings can be defined in SAP to achieve your requirement.
Country Chart of Accounts is just for the purpose of drawing a Balance Sheet with reference to Alternative Accounts instead of GL Account from Operating Chart of Accounts.
As you said, only assignment of Alternative Account in GL Master record is possible, means to say that you are just linking GL and Alt A/c for the above purpose of Balance sheet.
So whatever postings (say for instance, inventory postings to Stock GL Account) you made via OBYC will not really flow into this Alternative Account and thus no point in talking about displaying this Alt a/c balances.
Regards
Mahesh
Edited by: Mahesh M on Nov 29, 2008 11:20 PM

No corporate chart of accounts is defined for your chart of accounts

Hi
I want to know what can be the reason if GLs exist at the chart of accounts level and not at the comany code level even though the company code is assigned to the chart of accounts .
When I go to create the Gl at CoCd leve it says 'No corporate chart of accounts is defined for your chart of accounts'.
Please suggest, (the Chart of accounts has been copied)
thanks

hi,
the chart of accounts are three types
1.operating chart of accounts
2.Country chart of accounts
3.group chart of accounts
Charts of accounts can have three different functions in the system:
Operating chart of accounts
The operating chart of accounts contains the G/L accounts that you use for posting in your company code during daily activities. Financial Accounting and Controlling both use this chart of accounts.
You have to assign an operating chart of accounts to a company code.
Group chart of accounts
The group chart of accounts contains the G/L accounts that are used by the entire corporate group. This allows the company to provide reports for the entire corporate group.
The assigning of an corporate group chart of accounts to a company code is optional.
Country-specific chart of accounts
The country-specific chart of accounts contains the G/L accounts needed to meet the country's legal requirements. This allows you to provide statements for the country's legal requirements.
The assigning of an country-specific chart of accounts to a company code is optional.
Use
You can enter a group account number as additional information in the G/L accounts of the chart of accounts you are using. The system checks whether the group account number exists in the corporate chart of accounts.
Example
If the structure of the chart of accounts is predetermined by national legal requirements, you can define a corporate chart of accounts. All accounts receive a group account number which is the same for all accounts of that particular type in various different charts of accounts.
For consolidation purposes, you can define the balance sheet and P+L by using group account numbers, i.e. they do not need to be defined differently per country.
path - spro -img - financial accounting - general ledger accounting - master data - g/l accounts - preparation - Edit chart of accoun list ( OB13 )
t.code ob13 matain chart of accounts under u will matain Group chart of accounts
1.define account groups obd4
t.code ob62 assign ur chart of accounts ur company code
Accounting -> Financial accounting -> General ledger -> Information system -> General Ledger Reports -> Master Data -> -> Chart of Accounts Chart of Accounts.
Description
The Chart of Accounts program is used to display G/L account master data which is not specific to the company code and print out G/L account lists. You can use it for informational and documentation purposes.
Output
You can specify selection criteria to limit the number of G/L accounts printed.
The system displays the G/L account number and long text first. Double-click an account in the list to display additional master data that is not specific to the company code.
Edited by: janaki ram on Oct 21, 2008 6:19 AM

Pre-requisite checker script for EBS R12 and R12.1

hi
is it possible to make a pre-requisite checker script (in perl or shell) for EBS R12 and R12.1 in RHEL5 or sun OS??
can anyone help / guide me to do so??
rgrds

I don't know about EBS R12, but apparently the Oracle Universal Installer can use options to just run the prerequisite checks without having to install the product.
E.g. /runInstaller -prereqChecker or -executeSysPrereqs
There is also a specific OTN forum available for installing E-Business suite:
LCM: 11i Install/Upgrade

SYCLO INSTALLATION PRE-REQUISITES and Procedure

Hello guys,
i am now starting a new mobility enhancement on SYCLO. Since i am new to SYCLO i googled some of its concepts and my primary concern is to configure Syclo in our Enterprise Landscape. so i want to know about the pre-requisites like :
1.what are the ADD-ONS need to be installed for syclo.
2-how Agentry mobile platform is integrated and built.
3-how Syclo's Agentry Editor is worked nested with Eclipse Development platform and installation procedure.
4- some more concepts on SMP 2.3.
so guys help me regarding on this SYCLO work-shop.
Thanks
ashish satapathy
Tags edited by: Michael Appleby

I am also new to syclo and so far i have come across these add-ons to be installed at ERP system.
SMFND 610_700
SMERP 610_700
Ref: Re: How to do app configuration in SAP ERP system for Agentry development
Regards,
Jitendra

Can we combine Query for cancelled requisitions and query for internal requisitions without internal sales order into a single query

Hi All,
Greetings.
I have two queries namely,
1.Query for cancelled requisitions and
2.Query for Internal Requisitions without Internal Sales Orders.
I was on a task to combine those two queries..
Can we do that? if so, please help me do that..
Thanks in Advance,
Bhaskar.

Hi All,
Greetings.
I have two queries namely,
1.Query for cancelled requisitions and
2.Query for Internal Requisitions without Internal Sales Orders.
I was on a task to combine those two queries..
Can we do that? if so, please help me do that..
Thanks in Advance,
Bhaskar.

Pre-requisites and steps for uploading chart of accounts in sap r/3

Similar Messages

Maybe you are looking for