Pre Requistes for to start Ehpi

Hi,
We have SAP ECC 6.0 with patch level 09(i.e Basis at 09 , ABAP at 09 , APPL at 06).
We have upgraded our solman to Ehp1 and the maitenance optimizer is configured.
Can i Directly start the installation of the EHp4 with ehp installer and it will also do the stack update or first i have to update any patches in ecc6 system then i have to start Ehpi.
Thanku

Hi Kumar,
You can do directly from here. For more information check SAP Note 849887 - SAP ERP 6.0: Support Package Stacks
Release and Info Note
Thanks
Sunny

Similar Messages

Any pre-requiste for data archiving

hi,
is there any pre-requiste for data archiving..
i.e., for a particular data we have to archive..
or any condition
regards
sree

Hi
Archive Selection
Use
For some archiving actions it is necessary to select individual archive files or whole archive sessions and make them available for the relevant action. You do this in the Archive Selection screen, which is accessible from the initial screen of the relevant action.
Archive selection is relevant for the following actions:
Delete
Read
Build index
Reload
Postprocessing
Prerequisites
Depending on the action, there are four different criteria for whether archiving sessions and archive files are displayed in the archive selection:
Criterion 1
Archive file status
Action
Criterion
Delete
Archive file status
Archived or
Stored (if sequence "Store before deletion" has been selected in Customizing)
Read
Archive file status Archived
or
Deleted
or
Saved
Build index
Archive file has the status Deleted and the file is in the file system
Reload
Archive file is in file system and the session has the corresponding status (see criterion 5)
Postprocessing
All archive files have status Deleted
Criterion 2
The archive file must contain at least one data object. If you have performed an archiving session and maintained the variants so that no data objects were archived, the archive file is automatically deleted and no longer offered for selection.
Criterion 3
If a file is not accessible in the file system, the file is not offered for selection. A file is only offered for read if all the files in a session are accessible.
While checking the accessibility of a file, the system performs a read access for each file. This check process can take a long time if there are a lot of files. To optimize this process the access check can be de-/activated according to archive files in file system and archive files in an optical archive in archiving object-specific Customizing.
Criterion 4
For client-dependent archiving objects only the sessions for the current client are offered.
Criterion 5
An archiving session can only be reloaded if it has the status Complete or Archiving session is reloaded.
Features
In the Archive Selection screen, which you can access by choosing Archive Selection from the initial screen of the archiving action, you can either select complete archive sessions or individual archive files.

Pre-requistes for work S-Curves

Hi,
Request experts to clarify the below points.
What are the Pre-requistes which need to be fulfilled before we can execute the S-Curves for a network activity, WBS element or Project?
Is progress analysis mandatory to draw S-Curves? If not, how to achieve the work S-Curve for PS objects?
Thanks

Hi,
As regards to S-Curve. I am not sure on this, but please go to CNE5 and select the graphical representation. You may get what you are looking for. Try for select all the relavant fields and see the graphs ( Total curves, Correlations etc ).
Hope this helps.
Regards,
Gokul

Pre-requiste for costing run

Hi
VERP, ROH are in BOM with S and price determination 3, FERT and HALB are also on Standard price.
I want to run costing run for semi-finished and finished materials in May 2010 in QA but May is not open.
I am going to maintain ROH prices via MR21 system response that prices could be maintained in period 4-2010.
I think if I maintained prices in 4-2010 then close the period 4 and open period 5, costing run will not pick the prices of ROH because these prices are not maintained in period 5. Material ledger is active.
Please advise pre-requisites for costing run in period 5-2010.
thanks
imdad

Hi,
When you use actual costing in Material Ledger,a price must be
released before the first goods movement in the period.
The sequence is as follows:
1. calculate and mark ALL prices BEFORE MMPV
2. run MMPV   to open the period
3. run price release (CK42N, CK24, CKME)
To ensure a complete release of ALL prices, it exists the dynamic price
release. That means postings, which occur after step 2, but before
of total completion of step 3, will release prices dynamically. That
means, a price change document is automatically triggerd by and posted
together with the goods movement.
For materials with Price determination control 3 this new price released price must
remain during the period.
Regards,
MLM

How to install XI and the Pre-requisties for the same?

Hi !
I want to install XI in my system. Can anyone tell me what are the prerequisties before installing XI and also the installation procedures ..
Thnx,
Laawanya

Hi,
as with follow this steps
1. WINDOWS OS (PREFERABLY 2003 SERVER) ENTERPRISE SERVER WITH SUPPORT PACK 1
2. INSTALL THE NECESSARY APPLICATIONS SUCH AS MS-OFFICE, WINZIP ETC..
3. IF IT IS A STANDALONE SYSTEM U NEED TO CONFIGURE THE MICROSOFT LOOP BACK ADAPTER AS THE SAME SYSTEM SHOULD ACT AS BOTH CLIENT AND SERVER..
So for this go to control panel click ADD NEW HARDWARE , there choose new hardware and click the radio button of install new hardware, and choose manually the Network Adapter there goto Microsoft LoopBack Adapter *
4. GO TO THE RUN IN WINDOWS TYPE AS DRIVERS THERE U FIND THE DIRECTORY OF *ETC * AND FROM THERE GO TO HOSTS AND SPECIFY THE STATIC IP ADDRESS WHICH WAS CREATED IN THE ABOVE STEP AND SPECIFY THE NAME OF THE MACHINE AS SAP TRANSHOST IF IT IS A STAND ALONE SYSTEM.
ipaddress Name of the Machine(SAP TRANSHOST) ==> this must be defined in the hosts file..
5. NOW SET THE VIRTUAL PAGE REPLACEMENTS BASED ON THE RAM SIZE USED IN YOUR MACHINE THE BASIC LOGIC IS 3 TIMES MORE THAN THE ACTUAL RAM SIZE.
*Eg: for 1GB --- 1024 * 3 so, the initial set was 3072*
to configure this right click MY COMPUTER go to ADVANCED there again go to ADVANCED and u find the SETTINGS there u choose the Advanced there u can see the INITIAL SET specify the value based on the RAM SIZE
6. INSTALL JAVA * J2SDK1_4_14 * CREATE THE CLASS PATH FOR THE JAVA ..
To configure this right click MY COMPUTER goto ENVIRONMENT VARIABLES there create a class path, by choosing New
Here choose Java Variable as JAVA_HOME and Java Value as PATH OF THE BIN FILE OF INSTALLED JAVA
7. INSTALL ORACLE 10 G i.e Oracle patches need to be installed.
8. Take the BACKUPS of the CDs or DVDs in your hard disk, and the partition of the hard disk make work area to 100 GB and the dump area remaining, Now from the dump area backup go to the SAP Product --- Installatiion Master --- SAPINST.EXE
when u come to the servers part, it is quite differient when compared with XI3.0 and PI7.0 and at the same time in PI we have a provision of installing the both java and abap as central instance and when u see in XI3.0 u need to sepatrately configure for both java and ABAP, as a whole in concern we dont see separately in the servers part..
Here choose the components of Netweaver which u require while configuring the receivers part..
Deploy the ADAPTERS by importing the XI7_0_SAP_BASIS_7.00_10_00.tpz
9. To add support pack TCODE was SPAM (SAP Support Pack Manager).,
10. To Create a new Client use TCODE as SCC4
11. Check the Tcode-- SICK ( It Shows whether any dependent objects are not consistently installed)
12. Finally download the SAP BASIS component in the IR..
for SLD Configuration...
SLD can be classified into 2 as
1. Software Catalog
2. System Catalog
Software catalog consists with Products and Software Components.
If u know Ms-Office we can understand better, Ms-Office is an Product in which Ms-Word and Ms-Excel and others are the components of the Ms-Office product in similar any object created in XI should store under any software component so we require a Software Component and at the same time this Software Components should be under Products, so we are creating products the hierarchy will be like this for software catalog
PRODUCTS -
>>> SOFTWARE COMPONENTS -
>> NAMESPACES CREATED DURING DESIGN -
> OBJECTS
System Catalog consists with Techinal System and Business System
Technical System is the physical entity but where as the Business System is the logical system of the Technical System..
i.e an n number of business systems are created for a singel Technical system.
Basically while developing the scenarios it is difficult to share the technical system so we develop instance of the technical system i,e a logical system.
feel free to post any queries regarding installation..
regards,
Kishore

Pre-requiste for Full incremental Load

Hi Friends,
I have installed and set up BI apps environment with OBIEE, BI Apps, DAC , Informatica. Now what are the immediate steps to follow in order to do full incremental load for EBS 12R for Financial and SCM.
SO PLEASE GUIDE ME AS IT IS CRITICAL FOR ME TO ACCOMPLISH FULL LOAD PROCESS.
Thanks
Cooper

You can do that by changing the Incremtal workflows/sessions to include something like update_date < $$TO_DATE and specify that as a DAC parameter. You willl have to do this manually. Unfortunately there is no built in "upper limit" date. There is a snapshot date that can extend to a future date but not for the regular fact tables.
However, this is not a good test of the incremental changes. Just because you manually limit what you extract does not mean you have thoroughly unit tested your system for incremental changes. My advise is to have a source system business user enter the changes. Also..they need to run any "batch processes" on the source system that can make incremental changes. You cannot count the approach you outlined a a proper unit test for incremental.
Is there any reason why you cannot have a business user enter transactions in a DEV source system environment and then run the full and incremental loads against that system? I dont mean a new refresh..i mean a manual entry to your DEV source system?

Confused Regarding SAP XI Pre requiste

Hi all,
       Many of the threads has all the information that ......particularly sravya blog.....all says ...that SAP XI has no pre requiste.........
        am still not able to understand that ..what are the concets we need in ABAP or java exactly if we want to enter into this field.
         I apologize if am asking a regular question......As i was confused and am not able to decide which i have to learn before going to start my career in SAP XI.. and also i have knowledge on basic concepts of SAP ..please help me out how to start .please explain me in detail..please don't give links..i confused by all the blogs..please explain me....in details....sorry if i troubles u all....
Thanks in Advance.

Hi Swathi,
First of all, Welcome to XI
Let me try to explain you in detail:
Q. Why Java and ABAP?
Ans. XI (now PI) is built on Java and ABAP stack, so knowledge of both will help you immensely to understand the working, tracing the error and building scenarios.
Like, for example XI's Integration Server (i.e. XI as a system) has three major components inside it, namely Adapter Engine (Based on Java), ccBPM engine (ABAP stack) and Integration Engine (Both ABAP and Java Stack)
Q. Is there any area where we would not need the knowledge on Java or ABAP?
Ans. While Designing message mappings, exposing Webservices, designing ccBPM scenarios, what you will need is a good knowledge of SOAP, XSDs, XML, WSDL, XSLT etc, i.e. you need to have a feel of open standards to understand how XI works and where it is placed architecturally.
Q. Where do I need Java knowledge the most?
Ans. As I am unaware of your technological background, let me assume that you know nothing of SAP.
       So, if you have a descent knowledge and exposure of Java, it would help you to:
       a) Understand and resolve errors and issues in XI (mainly based on Java)
       b) Enhance the capabilities of Adapters (nothing but complex java programs)
       c) Enhancing Message Mappings (by writing Java based 'user defined functions')
       d) Writing mapping programs exclusively in Java (Java message mapping)
       e) Writing Java code to connect to any Java application (known as Java Proxies)
Q. Where do I need ABAP knowledge the most?
Ans. XI or PI is a middleware, i.e. it interacts with applications or systems at both the ends. Primarily one of the end (back end) is SAP R/3 or ECC (advance version of SAP R/3) box. Here your knowledge in ABAP comes handy. Communication between XI and SAP takes place using core SAP technologies or formats like IDoc, RFCs or plain ABAP code (known as proxies).
       Also you need to have an average knowledge of SAP ABAP (Advance Business Application Programming Language), a 4th generation language to be able to trace erros and build customized programs in SAP environment.
I hope, this would help you.
Please free to throw any doubts you still have
As you seem to be a new bie, please award points if you find this information useful.
Thanks,
Varun

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

Pre requisits for Internation HR and Payroll Setups

Hi All,
Can any one help me in Pre requisits for Internation HR and Payroll Setups.
Thanks in advance.

Here's some stuff to get you started:
International HR and Payroll (Doc ID 261452.1)
Running International HR and Payroll Setup (Doc ID 278006.1)
HOW TO ENABLE ENHANCED RETROPAY FOR INTERNATIONAL HRMS PAYROLL SETUP (Doc ID 458535.1)
If you have specific problems, please give full details of what they are and error messages (etc) and I'm sure someone can help further.

Pre requisites for installing SAP Router

Hi Friends,
As i am going through the implementation phase, I have to install sap router which i am new at. Also i am doing it because i have to connect Maintenance Optimizer to Sap service Market place for which Router would be essentially required.
I have some questions to put forth.
1. what are the pre requisites for SAP Router
2. Do we require Public IP and what would be the use of this ip
3. how to configure the SAP Router
4. Can i install the SAP router on the same host on which we have Solution manager, is it advisable. or we should go for a seperate host.
Regards
Aayush

Installing the sapcrypto library and starting the SAProuter
Contents
u2022     Downloading necessary software components from SAP Service Marketplace
u2022     Creating the certificate request
u2022     Additional actions necessary before you can start saprouter
This section describes the necessary steps to download and install the sapcrypto library for use with saprouter. The saprouter must be started with the options described later in this section.
The license for the sapcrypto library covers saprouter connections between saprouters at SAP and the first saprouter on customer sites and backend connections within the customer`s network. For all other purposes the library CANNOT be used!
Downloading necessary software components from SAP Service Marketplace
1.     Login to the SAP Service Marketplace with the Service Marketplace USERID which is assigned to your installation.
2.     Change to the alias SAPROUTER-SNCADD. Before you can download the software components two preconditions must be met.
     a.     You must have been allowed to download the software. This authorization is added as soon as SAP has received a positive statement from the "Bundesausfuhramt". This procedure is necessary since the software falls under EU regulations.
     b.     For more information on how to obtain authorization if download is not possible see note 397175.
     c.     You must accept that you must follow the regulations imposed by the EU on the use and distribution of the cryptographic software components downloaded from the SAP Service Marketplace.
3.     The acceptance of the terms and conditions is logged with your USERID and stored for reporting purposes to the "Bundesausfuhramt".
4.     Accepting with the button on the web-based form takes you to the folder where you can download the Software components.
These are packed into a single CAR file sapcrypto.car
5.     Copy the file to the direcory where the saprouter executable is located
6.     You can get the file car.exe/sapcar.exe, which is necessary to unpack the archive from any Installation Kernel CD.
Executing the command car -xvf SAPCRYPTO.CAR will unpack the following files:
[lib]sapcrypto.[dll|so|sl]
sapgenpse[.exe]
ticket
Creating the certificate request
1.     As user <snc>adm set the environment variables
SECUDIR = <directory_of_saprouter>
2.     Change to the Shortlink SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant "Distinguished Name"
3.     Generate the certificate Request with the command
sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
4.     Alternatively use the two commands:
sapgenpse get_pse -v -noreq -p local.pse "<Your Distinguished Name>"
sapgenpse get_pse -v -onlyreq -r certreq -p local.pse
5.     Display the output file "certreq" and with copy&paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name
6.     In response you will receive the certificate signed by the CA in the Service Marketplace, cut&paste the text to a local file named srcert
7.     With this in turn you can install the certificate in your saprouter by calling
sapgenpse import_own_cert -c srcert -p local.pse
8.     now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
9.     This will create a file called cred_v2 in the same directory.
For increased security please check that the file can only be accessed by the user running the SAProuter.
Do not allow any other access (not even from the same group)!
On UNIX this will mean permissions being set to 600 or even 400!
On NT check that the permissions are granted only to the user the service is running as!
1.     Check if the certificate has been imported correctly
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
2.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 4. If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands
4.,7.,8. and 10.
Additional actions necessary before you can start saprouter
1.     The environment variable SNC_LIB needs to be set for the user account SAProuter is running under.
SNC_LIB has the form
UNIX      <path_to_libsecude>/<name_of_sapcrypto_library>
Windows NT, Windows 2000     <drive>:\<path_to_libsecude>\<name_of_sapcrypto_library>
2.     Check if the environment of the user running saprouter contains the environment variable SNC_LIB
UNIX     printenv
Windows NT     System environment variable
3.     start the saprouter with the following command line:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
the corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
Example
For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Lalit Kumar

Pre-requisites for implementing WMS for an Existing Organization.

Dear Folks,
My client is planning to implement WMS for an Existing Organization.And this organization(warehouse) performs all the daily transactions.
Are there any pre-requisites to be done before implementing WMS on this organization?
Any help is highly appreciated.
Regards,
Sri

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

Pre-requisites for running report for P45 RPCP45GN

Hi,
We would like to know that are there pre-requisites steps that are now required to run RPCP45GN program and if so what are they?
Regards
Nimmi

Hi,
The following are Pre-requisites for RPCP45GN in new year legal changes:
1> The starter report RPUEFO_STARTER should be run before running the leaver report RPCP45GN.
2> Last payroll should be run for that perner.
3> The actions must performed e.g. leaver, payroll area changed, etc.
4> Infotype 65 should be correct maintained.
5> Address infotype 6 should be maintained for the perner.
Hope this could solve your problem.
Regards
Roop

My laptop ask for a start-up disk

my laptop stopped working having lines all over and I thought I close it and restart.
But now it ask for a start-up disk

Do you have restore discs that came with the computer or did it come with Lion pre-installed? If the former boot the computer from the installer disc to at least determine if the computer is OK. If it is, then the problem is with the drive.

Pre requisites for implementing ChaRM & CTS+

Hi Experts
We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
Thanks in advance
Thanks & Regards

>
venkatesan janardhanam wrote:
> Hi Experts
>
> We are planning to implement charm & cts+ in our company. We are having 3 system landscape and we have ep, bi & ecc systems.
>
> I want to know how much space and RAM will require for implementing this and please tell me what the Pre requisites for implementing ChaRM & CTS+.
>
> Thanks in advance
>
> Thanks & Regards
Hello Venkatesan,
There isnt a T-Shirt sizing available for a Solution Manager system per scenario usage. You will have to use the sizing tool available on the url : http://service.sap.com/solutionmanager --> Check the section Starting with EHP1 and under the planning section you would find the sizing tool.
Once this tool is downloaded you can then add the scenarios that you would like to use and plan your system accordingly.
Regards
Amit

Pre Requistes for to start Ehpi

Similar Messages

Maybe you are looking for