Predictive Dialer for load testing CCA
How can CCA be load test using Predictive Dialer. Is this feature available with CCA administrative manager or it should have extra license and hw/sw requirements.
Check the previous post and let me know if you still have questions....
Similar Messages
-
Application Insights for load testing in VS 2013, Azure Preview or Visual Studio Online?
I'm trying to get some clarification on which version of application insights to use to get performance counters from application insights for my azure cloud service for load and performance testing purposes.
So far, its not be clear what the differences between the two versions are, after deploying first the Azure Preview version, I attempted to set up performance counters using application insights but was shown an error because my visual studio online account
did not have an associated application insights instance.
Is it possible to get performance counters using AI for load testing using the Azure Preview version? If so, how? If not, is that planned as a new feature or will performance counters for VSO cloud based load testing have to be used when support for the
VSO version of application insights is eventually dropped?
Thanks,
LukeHi Alex, thanks for your response. I do have an Azure account, and have tinkered with AI in Azure Preview. My question was more about what the differences between the VSO and azure preview versions of AI are.
When I initially deployed AI to the azure portal and tried to run load tests from visual studio (cloud load tests, that is) I could not. Its possible I had made a mistake in configuring the azure version of application insights though. Strangely enough,
I actually do still see application insights data in the azure preview portal after I removed the newer AI version and installed AI 1.3.
To clarify my question, is it or will it be possible to run cloud based load tests (using visual studio online or another integrated service) against a azure web role deployed with application insights for azure and get performance counters of the system
under test via AI? To do that, will I also have an application insights application in the visual studio online account (similar to how I do now with the VSO version of AI), because that seems to be a requirement to load performance counters from application
insights within visual studio.
Thanks and sorry if I misunderstood your answer. -
Which tool do you use for load testing?
Which tool do you use for load testing for J2EE application?
hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
For Getting Started refer to any tutorial for Jmeter
You can refer to introduction on
http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
Extract jakarta-jmeter-2.3RC4.zip in c:
install jdk-1_5_0_12-windows-i586-p.exe
Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
In Test Plan add Thread Group
Right Click Thread Group -> Add->Sampler->HTTP Request
Select HTTP Request added fill details
Serverip:www.xyz.com
Port:80
Path:/xyz-webapp/index.jsp
Use KeepAlive: Checked
Retrive All Embeded images from HTML: Checked(For geting images inside html)
Right Click Thread Group -> Add->Listner->Graph Results
Click on Thread Group Fill details
No of Threads:3(This means no of simultaneous users)
Ramp Up Period:1(3 Request will be made in 1 second period)
Loop Count:5(Above process should be repeated how many times)
Save TestPlan
Run -> Clear All
Run -> Start
Click on Graph Results for Output
Try adding different listener in Thread Group
Thread Group -> Add->Listner->Summary Report
Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
In Test Plan Add Thread Group
In HTTP proxy server select Target Controller as Test Plan > Thread Group.
Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
which is configured in Jmeter proxy server.Save Settings.
In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
In browser navigate the application which you want to test.
The nodes will be added in the Thread Group.
Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
When we have to login into system and then navigate the system
we need a cookie to be tracked after login. This could be achieved
simply by Add -> Config Element -> HTTP Cooie Manager.
After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
When a request is made multiple parameter is sent to server.
Parameters are sent from the HTTP Request node added in the Thread Group
in "Send Parameter with the request" table.
If we run the loop count 10 times the parameters will be sent same in every request.
If you have to send parameters like user1,user2,user3,user4....
then add -> Pre processor -> Counter.
Put start as 1 and and Maximum as 10 or whatever required.
Put Referene name as iCtr or whatever.
In the "Send Parameter with the request" in value column put user${iCtr} -
Tools for load testing SharePoint 2007
Please advice a tools, which i can use for load testing a SharePoint 2007. We had one issue with performance and want now to detect a reason. So i need to simulate a load testing with 500-600 users for one SharePoint page.
I have found some information, that i can use a Visual Studio Test Edition, but my level of MSDN subscriber has just a Visual Studio. May be there is another free tools for this...Hi Evgeny,
SharePoint test data load tool (WSSDW.exe) can be used for your scenario, this article should help you to start with-
Tools for performance and capacity planning (Office SharePoint Server)
http://technet.microsoft.com/en-us/library/cc262198(v=office.12).aspx
To download the tool - http://sptdatapop.codeplex.com/
Bill Baer has good blog on this -
http://blogs.technet.com/b/wbaer/archive/2007/08/02/stress-testing-microsoft-office-sharepoint-server-2007-windows-sharepoint-services-3-0.aspx
http://blogs.msdn.com/b/sanjaynarang/archive/2009/04/18/sharepoint-performance-stress-load-testing.aspx
http://blogs.msdn.com/b/edglas/archive/2007/02/17/sharepoint-load-tests.aspx
another tool to consider - Web Capacity Analysis Tool
http://technet.microsoft.com/en-us/magazine/2008.04.utilityspotlight.aspx?pr=blog
http://support.microsoft.com/kb/231282/en-us
http://blogs.iis.net/thomad/archive/2010/05/11/using-the-wcat-fiddler-extension-for-web-server-performance-tests.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
OpenScript fails to record AJAX element for load testing
OpenScript 12.2.0.1 is failing to record AJAX element for load testing.
After I press a button a text box should appear in another part of the screen.
What can I do in this case?Hi,
I think your password is encrypted. Try replace password "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with your password.
Or Get output of obfuscate("your password") and replace "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with {{@deobfuscate( output of obfuscate("your password") )}}
Regards,
Deepu M -
Protocols Supported in OATS 9.2 for Load testing
Hi,
Can any one help us in providing list of protocols supported by OATS 9.2 for load testing applications.
Thanks in advance.
Regards,
MaheshHi Mahesh
OATS 9.20 have the following modules for load testing:
- HTTP/S
- Siebel
- EBS/Forms
- ADF
- Flex
- Oracle Database
Regards
Alex -
Is Controller essential to test application in OATS for load testing
Hello
Is Controller tool essential to test application in OATS for Load testing?
Regards,
SrinivasHi,
Yes. The controller is responsible for setting up the load test scenario, and for initialising all VU's on the agent systems.
Regards
Wayne.
Edited by: byrne_wayne on Apr 12, 2011 2:24 PM -
Basic Authentication for load testing WSDL Web Service
I'm trying to load test a web service; the WSDL URL is behind a username and password, using the basic http authentication. I can add the WSDL URL without issue with the username and password, but when I playback the script, I get "401 Unauthorized" errors
I looked at Preferences > Record > Web Services > Proxy Configuration, which then refers you to Preferences > Record > HTTP > Proxy Settings. I also looked at similar settings under Preferences > Playback.
I am running OpenScript (9.1), how do I configure this ... ?
Many thanks!
KM
Edited by: KM on Sep 14, 2011 12:12 PMHello
You can right click on the initialize section of your script then:
Add -> Other -> HTTP -> Authentication.
You need 3 parameters:
A url - http://someurl - that will authenticate any url that contains the http://someurl string e.g http://someurl.com/index.html
A password
A user
The following code should be added in your script:
http.addAuthentication("http://someurl", "username",
deobfuscate("5blNah5kX/XuZnepYwInFw=="));Hope this helps
Alex -
Agent Weightage in VSTS for Load test
Hi,
1- Could you let us know the Default Weightage assigned to Agents by Controller.
2- Could you please let us know if the assumption made in the below scenario is correct-
Scenario - We need to run a Load test by simulating the
Total load of 100 users, and we have total 5 Agents assigned to 1 Controller. Now, suppose if the default weightage of Each agent is 100. So Does it mean that EACH agent will generate the 100 users load and Hence, making the Total
load of 500 users ?
3- How we should configure the Agents to MEET the TOTAL load as required.
Thanks, Anoop SinghSee https://msdn.microsoft.com/en-us/library/ms243155.aspx and
https://msdn.microsoft.com/en-us/library/dd695837.aspx which explain that user load and weighting are separate. The user load is as given in the scenario(s). The weighting says how to distribute
those users across the agents. The weights do not need to add up to any specific value, they are just used as ratios.
Regards
Adrian -
Bulk triggering of messages for load testing
Hi EveryBody,
We are doing load testing of the messages and I want to trigger a message N times (Say 1000 times).
Can somebody help me out on how to trigger the same message many times.
Helpful answers will be rewarded points.
Thanks & Regards,
RKhi,
there are many tools to do that
one of the most famous being loadrunner
http://en.wikipedia.org/wiki/LoadRunner
from there you can schedule as many messages as your hardware will
be able to handle
use those professional tools to serious stress testing
Regards,
Michal Krawczyk -
OATS - Playback is not working in OpenScript for Load Testing with Web/Http
Hi,
I am able to record the script in Open Script successfully, but when I try to playback the same without making any changes....its fails with error : Failed to solve variable web.input.Submit using path .//input[@name='Submit']/@value
I have already commented the part where password will be matched in the code....thus, login/bad credentials related issues is ruled out as well.
Please help with me some solution.
Following is the recorded script:
import oracle.oats.scripting.modules.basic.api.internal.*;
import oracle.oats.scripting.modules.basic.api.*;
import oracle.oats.scripting.modules.http.api.*;
import oracle.oats.scripting.modules.http.api.HTTPService.*;
import oracle.oats.scripting.modules.utilities.api.*;
import oracle.oats.scripting.modules.utilities.api.sql.*;
import oracle.oats.scripting.modules.utilities.api.xml.*;
import oracle.oats.scripting.modules.utilities.api.file.*;
public class script extends IteratingVUserScript {
@ScriptService oracle.oats.scripting.modules.utilities.api.UtilitiesService utilities;
@ScriptService oracle.oats.scripting.modules.http.api.HTTPService http;
public void initialize() throws Exception {
http.setUserAgent("Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.2)");
http.setAcceptLanguage("en-US");
* Add code to be executed each iteration for this virtual user.
public void run() throws Exception {
beginStep("[1] FLEXCUBE - PRIVATE BANKING", 0);
http.window(2, "window[@index='0']").get(
"http://10.180.59.185:9500/wm", null, null, true, "UTF8",
"UTF8");
http.solveXPath("web.input.Submit", "/window[@index='0']",
".//input[@name='Submit']/@value", "Sign In", 0,
EncodeOptions.None);
http.solveXPath("web.input.strutstokenname",
"/window[@index='0']",
".//input[@name='struts.token.name']/@value",
"struts.token", 0, EncodeOptions.None);
http.solveXPath("web.input.strutstoken", "/window[@index='0']",
".//input[@name='struts.token']/@value",
"CFSZKA9Z6RSWJTW8TT35GXCNIOIGMJGA", 0,
EncodeOptions.None);
endStep();
beginStep("[2] FLEXCUBE - PRIVATE BANKING - Home", 8538);
http.form(
14,
"window[@index='0']//form[((@id='formLogin' and @name='formLogin') or @action='http://10.180.59.185:9500/wm/j_spring_security_check;jsessionid=B8396BEC73D829538F5E55FEE125330D') and @index='0']")
.submit(null,
http.postdata(
http.param("j_username", "HOHEAD1"),
http.param("j_password",
"a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6"),
http.param("Submit",
"{{web.input.Submit,Sign In}}"),
http.param("struts.token.name",
"{{web.input.strutstokenname,struts.token}}"),
http.param("struts.token",
"{{web.input.strutstoken,CFSZKA9Z6RSWJTW8TT35GXCNIOIGMJGA}}")),
null, true, null, null, null, null, null);
endStep();
beginStep("[3] FLEXCUBE - PRIVATE BANKING", 9875);
http.link(
28,
"window[@index='0']//a[@text='Logout' and (@href='http://10.180.59.185:9500/wm/logout.jsp?logoutToken=0.1189281079747162' or @index='159')]")
.click();
endStep();
public void finish() throws Exception {Hi,
I think your password is encrypted. Try replace password "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with your password.
Or Get output of obfuscate("your password") and replace "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with {{@deobfuscate( output of obfuscate("your password") )}}
Regards,
Deepu M -
Need JAR files for load testing the dicoverer plus 9.0.4
I am able to capture the Applet events in oracle discoverer plus 9.0.4 using loadrunner. But i am not able to replay the script. For replaying the script it needs some jar files to be included in the classpath. Source.jar,Xmlparserv2.jar,inner.jar and remoteclient.jar files. I am not able to find out the source.jar and remoteclient.jar in server.
Any one help me out to get all these jar files with complete stuff to include in classpath and replay that is run the script in loadrunner.
i need these jar files urgently. Version is discoverer plus 9.0.4Hi, Bhushan and all!!
I have the dll's needed for the connection:
- GxSiebelBridge.dll
- Interop.SiebelApplicationServer.dll
- Interop.SiebelBusObjectInterfaces.dll
- Interop.SiebelDataServer.dll
Tell me if you want it. You can implement these dll's with JNI (Java Native Interface).
I need the jars, too. If anyone have it, please send me.
Thanks!! -
Simulating 500 users for load testing in obiee11g
Hello
Could anyone let me know how to do stress/performance testing by simulating 500 users in obiee11g.
ThanksHello,
Refer to : http://www.rittmanmead.com/files/ukoug_venkat_obiee_testing.pdf
You need to use as testing automation tool like Apache JMeter. Link below describes how
http://www.rittmanmead.com/2012/09/advanced-monitoring-of-obiee-with-nagios/
Hope this helps. Pls mark if it does.
Thanks,
SVS -
Load Testing for IMS 5.2
hi,
is therer any tools available for load testing for ims 5.2? Can mailstone be used? Understand that this is used in NMS 4.x
thxz
cheerz
marxzThere is no offically supported load testing tools that I am aware of. You are correct that mailstone was shipped with NMS. I have used mailstone, once, but could not figure out what the thing was trying to do. I think it is badly written and the documentation is extremely lacking, IMHO.
Being that iMS follows Internet standards you can use any testing tools that also follow those Internet standards. I've not researched to know if load testing tools exist for mail servers or not, certainly someone has done it. -
Load testing tool for FMS based application
Is there any tool which can be used for Load testing of
FMS?Our Flash based application uses FMS for streaming LIVE
audio/video and data and we need to test the sceanrio that what
happens to remote server and FMS when 1000 users get connected.quote:
Originally posted by:
dineshawasthi
Is there any tool which can be used for Load testing of
FMS?Our Flash based application uses FMS for streaming LIVE
audio/video and data and we need to test the sceanrio that what
happens to remote server and FMS when 1000 users get connected.
No standard tool will be able to test your own application
the way you describe here.
The answer however is pretty simple ; write a simple swf that
can connect (automatically) to a random available instance and let
it play a stream.
Since you probably developed your application yourself this
shouldn't be a problem.
Next open 20-50 swf's (in 20-50 browsers) on your desktop.
Repeat on the desktops of your collegues. Open as many swf's
as possible. (if your FMS server is in your LAN otherwise you'll
probably will hit your bandwidth-limit soon)
This will give a very good impression of load, bandwidth and
stability of your application.
Maybe you are looking for
-
Error while installing mapuploader on the PC
Hi! I've got myself a new E63 and am trying to download the country maps. I've installed mapupdater on my PC and have downloaded the mapuploader installable. However, while trying to install the same I get the following error: "Error 1327. Invalid Dr
-
Browser won't print website graphics - only text
Does anyone know how to print up web pages so that the graphics on that page will show up and not just the text? I have tried printing with both Firefox and Safari and both refuse to print the graphics. I have a new Epson Color Printer. Any advice, s
-
How can I get interactive websites to work with Firefox?
In the last week many of the interactive websites I've been using for years suddenly stopped working properly. However they do work with Internet Explorer. How can I get them to work again with Firefox?
-
How to run Windows-only applications on Macs?
Is there a way to do this without having to purchase huge software programs (like Parallels, etc.)? I am only wanting to run 1 Windows-only application, not install the entire Windows-theme onto my laptop. Thanks for the help!
-
Weird characters in site ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ
I have made and uploaded my site in iweb 08. But when I upload it to the university's server, these weird charcters show up in some places: ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ I don't see anything like this in iweb though. Could someone please