PreE V8: In/Out Clip Set Points Not Saved in Preview Screen

After I set set in/out points in the Preview area on a clip then click on the X to close it, when I reopen the clip or when I drag the clip to the timeline/sceneline the set points are gone. I have to first drag the clip to the timeline then trim it. But then the trim points are not kept with the clip for reuse if I drag the clip a second time to the timeline.
How can I get the set in/out points to be saved with the clip when I set them in the Preview panel?

I am using a Canon HF20 and imported the video files into an a Photoshop album using the Elements 8 Organizer like I always do.
I can clip in the timline with no problem. Just not in the Preview window and have it save the in/out points.

Similar Messages

External monitor resolution setting is not saved

I use an external monitor as an extended desktop for my macbook pro.
The problem is that whenever I turn on the mbp, the resolution of the external monitor reverts back to the default resolution. Is there any way to set the resolution of the external monitor and have the mbp save it even after turning the mbp on and off?

tar8584 wrote:
Hello all,
After installing the 10.5.2 update, my Macbook Pro's boot time increased. So, after researching this issue, I decided to reset the PRAM. This solved the boot time problem, as my Mac now boots as quickly as it did prior to the update. But now, the brightness setting is not saved and the brightness level returns to the maximum value each boot up. Other settings, like audio level, are saved properly. The brightness seems to be the only problem. Any ideas on how to correct this?
Thanks,
Anthony
Besides staying with 10.5.1 has anyone found a real solution to this? I want to install Aperture and I need to have 10.5.2 installed in order to instal Aperture v2.x.
Thanks!

In/Out not saving in preview clips

I can't get the IN/OUT trim points to save on preview clips, am I doing something wrong:
1) In "Organise" mode
2) Double click the clip - preview window is displayed.
3) Drag in/out markers to right place
4) Click the "X" top right to close it
5) Re-open the clip, in/out not saved
6) Drag to timeline, in/out not saved
What am I missing here?
These are quicktimes from Canon 5D MK II if that makes any difference.
- Simon

You're trying to trim in Organize mode.
Instead, click on Project to open the media panel. Double-click your clip in the Project media panel and set your in and out points in the Clip Monitor. They should stick.

Receiving point not saved in VA01

Guru's,
I working with the client who wanted to store the Unloading point and Receiving point during the VA01 (Order entry time). It works perfect when we enter these 2 values at the header level but it's not working when we enter at the line item level.
Please create sales order with at least 2 different items and entry the unloading point and receiving point. Save the order.   When you display the order (VA03), double click on the item level and click "Shipping" tab, you will notice only the Unloading point got saved but the Receiving point did not save.
When I recall the same order in VA02 and maintain the Receiving point, it then saves the data.
The problem we are facing is only during the first entry time.
Any help on this will be greatly appreciated and points will be rewards ASAP.
Please respond to my email [email protected]
Thank you very much,
Nevill
California, USA.

Hi AniKumar,
Can you please attach the pdf document regarding how to display unloading point hours in sales orders or forward to [email protected]
Thankyou

My 3.4.5 has ~ 35000 jpg masters. I have set aperture not to create previews on import and have ensured "maintain previews" is not ticked. Every time I start aperture it insists on creating previews for ~ 4300 images. Why?

Having had the previews created I selected all photos and "delete previews". It did this quickly and no more previews being created. Once aperture is closed and then re-opened aperture immediately sets about creating the previews for the same photos. I don't understand why this should be happening.
This is occuring on my Mackbook Air (Aug 2012) which has 256 GB storage. I am fast running out of space as I am using "Managed Masters". I intend to make the masters referenced by relocating them to an external HDD but before doing this would like to clear up this problem first. I keep my Vault on the external HDD and have Time Machine and Time Capsule. When I have relocated the masters to the external HDD I intend that TM backs the external HDD to the TC. I tink that I will use the second partition on the external HDD for Carbon Copy Cloner to back up the Mackbook Air.
Any help or advice warmly welcomed.

Frank
Many thanks for your input.
Following your advice I have selected all the projects individually and checked the status of Mantain Previews. Some were indeed marked up for Mantail Preview so I have unmarked them.
I have also selected Photos and deleted previews and also repeated this for My Projects.
Checking the Get Info for the Preview folder in Aperture Library in Finder this now tells me that I have zero bytes for 564 items.
Close and then reopen Aperture and it regenerates these564 previews in the blink of an eye. I haven't been able to locate these photos yet. I know there are about 120 in facebook and 10 in photostream but dont know where the rest are.
It seems the issue is not with Aperture but with myself and not understanding Aperture sufficiently well
Do you see the problem this way?

How do I get Firefox to start up without trying to dialout? (Work offline setting is not saved on restart.)

My home page is a local file. I do not want my browser dialing out at start up. It is hard to tell if there is a trojan or virus when it tries to dial out before I try to load a page. I turn off most automatic updates on extensions that have a setting for that. I do not have a problem editing a configuration file if needed.

Thanks, the-edmeister, that autodial-helper setting should solve the connection dialog. (I set it to false but haven't restarted yet.)
But the underlying cause will still be there, and it will do its thing if I'm already online. I could not track all the destinations, 2 show up only in firewall, one of those was UDP, but the other was TCP/IP I think (the firewall doesn't log every connection). Two other connections show up in my proxy log. One of those is a GET/POST of 106 bytes to ocsp.godaddy.com. It uses what looks like a unique ID called Etag. And it does this on every start up of Firefox. I can block that particular server, but it just gives the impression of behaving like spyware, which kills any trust I may have had. (I can remember not so long ago when well-behaved applications would not even check for updates without asking first.)
On a happy note, I went through most of my installed extensions, and most are not misbehaving. I uninstalled a couple that were and found a way to reconfigure another to get the info from a local file.

Why is firefox randomly playing advertisment clips that are not present on the screen?

I just downloaded Firefox 4 and now whenever I choose a new website or search, some kind of advertisement clip plays. I cannot find any ad box to close it or pause it, but it cuts itself off after about 30-60 seconds. If I stay on the website it repeats the same ad again. (Even on this site I have had random ad clips playing). I am not very computer literate so I don't know if its something I need to do on my end to shush these ads (preferably permanently) or something that I might need to seek help for.

Sounds as if you have some Malware on your PC.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Keyboard setting (language) not saved in multiple user setting

Since I added multiple user profiles to my MacBook Pro, the system seems to forget the settings of the keyboard (Dutch / belgium) and reverts always to US. The Dutch setting is deleted then. This happens in all user accounts.
I have another MacBook Pro thay is single user, and that one does not have this problem.
OS X 10.9.1

Incidently, I just tried this on another HP Desktop PC , a Pavilion a6702f, also with Win7x64; results were exactly the same odd behaviour.

Data set is not refreshing while preview in visual studio 2010

Hi,
Dataset is not refreshing the fields while preview the data. always I need to go to dataset-->query there I need to upadate it.
But I need to uupdate it dynamically in ssrs. I tried with Auto refresh option in report properties not getting expected result.
Thanks.

Hi,
Dataset is not refreshing the fields while preview the data. always I need to go to dataset-->query there I need to upadate it.
But I need to uupdate it dynamically in ssrs. I tried with Auto refresh option in report properties not getting expected result.
Thanks.

After Effects CC not saving ram preview when switching to different tab.

Okay so just recently upgraded to CC and have been experiencing some ram preview problems.
What happens is I will do a ram preview, watch it, then switch to a different window (Chrome, word, etc)
and when I go back to AE and do a ram preview it does it all over again even though i haven't changed anything in the comp.
I dont believe this was a problem in CS5.
Any help on what settings i should check or if its a coding problem would be appreciated.
Some specs:
16gb ddr3 ram
AMD FX-6300
Radeon R7 250
Everything Program/Cache is on SSD and the project file/video files are on Ext HDD

Okay it's kind of fixed. (it isnt deleting it like it used too)
i cleared my cache which was about 30gb, but I still had about 20gb of free space when i cleared it
but Now I am getting some crashes and other stuff (colored bars, i already read thats getting fixed though)
Do you think lowering the CPUs used to 3 will help?
Ill update if it does it again when the cache is getting close to full

Color signatures not saved in Preview

Hi all
When I paste a signature into Preview (using the inbuilt Preview signature annotation) with a colored ink, it is fine on the screen, and also if printed to paper or pdf; but if the file is simply saved, upon reopening, the signature has changed to black, although other color in the document remains.
Anyone else found this and why it does it?
Thanks, Paul

What happens when you try to create a signature?

Pointer not working properly in mozilla browser alone wat to do??????

pointer moves around the page but unable to select using the pointer.each time i had to press backspace to type something on the search box.i cannot get a dropdown box in gmail to sign out because of pointer not working properly.how do i rectify it??????????

You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Image is not saved in jpeg/bmp file but ok with png

Hi i am unable to save the image in disk in jpeg format.
Here is the code.
public void saveImage(){
//if no filechooser is there means no image file opened.
 if(fileChooser==null){
 if(errorWindow==null)
 errorWindow=new ErrorWindow(XXX.getPrimaryStage());
 errorWindow.showErrorWindow("There is no image to save !!\n");
 else{
 fileChooser.setTitle("Save The Image");
 File saveFile=fileChooser.showSaveDialog(XXX.getPrimaryStage());
 if(saveFile!=null){
 System.out.println("saveFile path= "+saveFile);
 //get the extension of output image to be saved.
 //XXX: is the main class name(say)
 outExtension=*XXX*.getImageExtension(saveFile);
 //if user does not give extension: set default extension as jpg
 if(outExtension.equalsIgnoreCase(saveFile.getName())){
 outExtension="jpg";
 String newPath=(saveFile.toString())+".jpg";
 saveFile=new File(newPath);
 Task task = new Task<Void>() {
 @Override
 public Void call() {
 Platform.runLater(
 new Runnable() {
 public void run() {
 try {
 //The image is inside ImageView->inside ScrollPane-> inside TabPane.
 Image curImage=XXX.getCurrentImage();
 int width=(int)curImage.getWidth();
 int height=(int)curImage.getHeight();
 System.out.println("cur image width= "+width+" ht= "+height);
 bufferedImage=new BufferedImage(width, height,BufferedImage.TYPE_INT_ARGB );
 //set the current image to awt Buffered Image
 SwingFXUtils.fromFXImage(curImage, bufferedImage);
 imageTabPane=xxx.getImageTabPane();
 Tab tab=imageTabPane.getSelectionModel().getSelectedItem();
 TabPane childTabPane=(TabPane)tab.getContent();
 ScrollPane sp=(ScrollPane)childTabPane.getSelectionModel().getSelectedItem().getContent();
 final ImageView imageView=(ImageView)sp.getContent();
 WritableImage wim = new WritableImage(width,height);
 imageView.snapshot(null, wim);
 System.out.println(" snapShot width= "+wim.getWidth()+" ht="+wim.getHeight());
 *ImageIO.write(SwingFXUtils.fromFXImage(wim,null), outExtension, saveFile);*
 //<------ its not working for png,jpeg,bmp,gif
 // the below lines are working only for png and gif
 OutputStream out = new FileOutputStream(saveFile);
 ImageIO.write((RenderedImage) bufferedImage, outExtension, out);
 out.flush();
 } catch (Exception ex) {
 Logger.getLogger(FileMenuController.class.getName()).log(Level.SEVERE, null, ex);
 //ex.printStackTrace();
 System.out.println("finished");
 return null;
 Thread th = new Thread(task);
 th.start();
 }else{
 System.out.println("File is not saved");
 }//saveImageNote: The above code is executed in ubuntu(10.04) using Netbeans 7.2(Javafx(2.2), java(1.7.0_11).
When i run(from terminal) separately in a new class with an image in an Imageview( inside a Vbox) and take the snapshot
of the imageview and write into the file using ImageIO.write(SwingFXUtils.fromFXImage(wim,null), outExtension, saveFile);
with any extension (jpeg,png etc) it is working fine.
Please help me.
Any small hint is also helpful.Please feel free to comment or give suggestion.
Edited by: 963038 on Feb 17, 2013 7:14 PM

When i omit the line OutputStream out = new FileOutputStream(saveFile);
and write only
ImageIO.write((RenderedImage) bufferedImage, outExtension,saveFile);
//out.flush();
then saving the image even in "png" also fails.
The following is the error code:
Note : FileMenuController is my file where the saveImage() is wrtten.
javax.imageio.IIOException: I/O error writing PNG file!
finished
 at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1168)
 at javax.imageio.ImageWriter.write(ImageWriter.java:615)
 at javax.imageio.ImageIO.doWrite(ImageIO.java:1612)
 at javax.imageio.ImageIO.write(ImageIO.java:1536)
 at *newciptk.controls.menu.file.FileMenuController$1$1.run(FileMenuController.java:205)*
 at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
 at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:76)
 at com.sun.glass.ui.gtk.GtkApplication._runLoop(Native Method)
 at com.sun.glass.ui.gtk.GtkApplication$3$1.run(GtkApplication.java:82)
 at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: Operation not supported
 at java.io.RandomAccessFile.writeBytes(Native Method)
 at java.io.RandomAccessFile.write(RandomAccessFile.java:499)
 at javax.imageio.stream.FileImageOutputStream.write(FileImageOutputStream.java:124)
 at javax.imageio.stream.ImageOutputStreamImpl.writeInt(ImageOutputStreamImpl.java:91)
 at com.sun.imageio.plugins.png.ChunkStream.finish(PNGImageWriter.java:136)
 at com.sun.imageio.plugins.png.PNGImageWriter.write_IHDR(PNGImageWriter.java:401)
 at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1135)
 ... 9 more
javax.imageio.IIOException: I/O error writing PNG file!
 at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1168)
 at javax.imageio.ImageWriter.write(ImageWriter.java:615)
 at javax.imageio.ImageIO.doWrite(ImageIO.java:1612)
 at javax.imageio.ImageIO.write(ImageIO.java:1536)
 at newciptk.controls.menu.file.FileMenuController$1$1.run(FileMenuController.java:205)
 at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
 at com.sun.glass.ui.InvokeLaterDispatcher$Future.run(InvokeLaterDispatcher.java:76)
 at com.sun.glass.ui.gtk.GtkApplication._runLoop(Native Method)
 at com.sun.glass.ui.gtk.GtkApplication$3$1.run(GtkApplication.java:82)
 at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: Operation not supported
 at java.io.RandomAccessFile.writeBytes(Native Method)
 at java.io.RandomAccessFile.write(RandomAccessFile.java:499)
 at javax.imageio.stream.FileImageOutputStream.write(FileImageOutputStream.java:124)
 at javax.imageio.stream.ImageOutputStreamImpl.writeInt(ImageOutputStreamImpl.java:91)
 at com.sun.imageio.plugins.png.ChunkStream.finish(PNGImageWriter.java:136)
 at com.sun.imageio.plugins.png.PNGImageWriter.write_IHDR(PNGImageWriter.java:401)
 at com.sun.imageio.plugins.png.PNGImageWriter.write(PNGImageWriter.java:1135)
 ... 9 more

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

Window sizing not saved?

I resize a sheet in Number v3 and save it bit the careful sizing I set is not saved and a small default window size opens when I re-open the file. How can I save my window sizing as per Number 09?
Thanks
Gary

Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps.

PreE V8: In/Out Clip Set Points Not Saved in Preview Screen

Similar Messages

Maybe you are looking for