Prefix Number range: Transport number range

Hi All,
Here is the situation. there are 2 dev servers. the prefix number range in both are maintained as 901 . The workflows will be trasported to a single prod servers. Now as i understand this will create some trouble in prod coz two workflows in two system might have the same number.
Now I think maintaining different number range might help. but when transporting to prod how willl this number range will be taken into account. I mean how to make sure that 901 will be transported as 901 and same as 902 range? Do i need to maintain some config in prod system or just reserving both the number ranges 901 and 902 in prod will solve the issue? Just need some confirmation ..
Thanks in Adv !
Anuj Sethi

Exactly. The numeric ID that is assigned to your workflow template follows it through the transport system in the same way that the include for a function module follows it.
The difference between workflow templates and reports (in this matter) is that you are not allowed to define the program name of the workflow template. Instead it is composed from the prefix and the next available number in that prefix range.

Similar Messages

Number range transport request

Hi,
pls tell me are number range intervals not transported using transport request, if yes then how are number ranges appear in prod. server.
thanks
Kavita

Hi All,
thanks for the inputs, but wish to understand the scenario completely I am practicing on IDES and i have been told tht we do not transport number range requests....my question is once we maintain number ranges on dev. server and then carry out customistion i.e. creating OM objetcs like position, job etc......which will be alloted numbers.....now when we move to prd server....then will these objetcs have the same numbers.....or first we maintain number range in prd server then import the customised OM objects
sorry to bother ....but need to understand
thanks Kavita

How to transport number range group Configuration in Material Master

Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
Vivek

Hi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore

Transporting Number range Intervals

Dear SRMers
System Information: ECC 6.0,
We created Z Number range objects in ECC system A and transported them to ECC System B.
The custom objects were transported, but the number range intervals did not transport to the target system. My question is do we need to transport the number range intervals for the custom objects seperately?
Points will be rewarded for answers.
Thanks in advance,
Best Regards,
Bob

Hi,
Usually best practice is to not transport number range but to recreate it in the target system.
However, technically it is possible.
Kind regards,
Yann

Transport Number range intervals

Hi,
I have created a custom number range with intervals (from & to number range values) i need to transport this to production and unit testing boxes. how to create a transport for this.
and also it is advisable to transport number ranges?
Thanks
Sa_R

Hi,
Thanks for your reply.
But my doubt is , the number range is newly created. have 250 subjects inside , User already maintained the intervals in the config box. So i need to transport this higher box. If i am transport this , whether all other number ranges get deleted? including SAP standard also?
Thanks
Sa_R

Number Ranges- Transport

Hai Gurus,
Can we transport number ranges from one envt to other envt.
can any one please clarify the doubt;
If it can be transported what are the preventive measures to taken care.
Thanks in Advance
take care
sameer

Dear sameer basha
No number ranges cannot be transported from one client to another client. It should be created and assigned in the same client. For example, if you want to maintain some number ranges for sales documents, you should create in production client itself using TCode VN01.
thanks
G. Lakshmipathi

Message while creating plant,Do you really want to transport number ranges?

hI
while creating plant[Copy from existing] i got the message 'Do you really want to transport number ranges?'
can some one through some light on this message
Thanks

REad carefully the info coming along with this message.
IF you transport number ranges, then you overwrite existing number ranges in your production system. you transport the e.g. the current number from your development system into production and overwrite there the current number.
As you usually produce less data in Development system than in a production system, the current number will be smaller after the transport, and SAP would then try to create data using the next number, which leads to a dump as thereis already a record in the database having this number.
so you should only transport number ranges if you do not effect existing number ranges in your production system.

Receiving Error "A Number Is Out of Range" in Acrobat 8.1.2 and 7.0

I create mapbooks for the county I work at using ESRI's ArcMap ArcEditor. Once the book is done I convert it to PDF so that officers, fire fighters, etc. can open it on their laptops. Recently I started receiving the error "A Number is Out of Range" when I finish combining the PDF files into a binder. The error persists anytime I change pages and I have to click OK several times before it goes away. This becomes a problem for emergency management when their trying to search a road, plus it is also very annoying. Does anyone know how to get around this? It didn't use to do this. I thought maybe it was the fonts I was using, so I changed most of them to Arial and Times New Roman, yet it still persists, but seems slightly better. I cannot find anything on Adobes website about A Number is Out of Range. Also, I am using Acrobat Professional 8.1.2 and have also tried Professional 7.0. I'm running Windows XP. I have also tried reverting back to old versions of ArcMap and also the mapbook software MapLogic, but nothing helps. Any help would greatly be appreciated.

I'm getting this error also, and I don't think it's a font issue. Here's my situation.
I created a 144-page manual in Adobe FrameMaker 8.0 using the same template and fonts that I have used in several other large manuals. I saved the manual as a PDF using Acrobat 3D 8.0, and is get the mind-numbingly vague error "A number is out of range." I didn't get this error in previous versions of this manual, nor do I get this error with the other manuals on which I am currently working. I had inserted some EPS technical drawings, so I opened all of them in Illustrator CS3 and Created Outlines for any text that appeared in the illustrations.
After two days of replacing all of the fonts, optomizing PDFs, and distilling, distilling, and distilling again, I was not able to get rid of this message using Acrobat. I finally pulled out my MacBook Pro, opened the PDF manual using Preview, saved the PDF under a different name (no need to apply a Quartz filter), and (abracadabra!) the vague error message is gone!
Fonts may be one cause of the annoyingly vague "A number is out of range" error, but they are not the only one. And with such informative error messages as that, I doubt I'll ever know what is really wrong with my PDF.
Cheers!
Michael Opsteegh

There was an error processing a page. a number is out of range.

When I open a PDF generated from a classic ASP application, some particular documents fail when accessing a page: there was an error processing a page. a number is out of range.
This only happens in Adobe Reader 10 and 11.
The ASP page has a code similar to this:
Response.AddHeader "Content-disposition", "attachment; filename = doc.pdf"
Response.ContentType = "application / pdf"
Response.Write Session ("PDF")
Try adding different settings in the properties AddHeader / ContentType / CharSet etc, but always the same.
In the screenshot you can see the mistake in page 3
Any idea?
thank you very much

Sounds like the pdf is corrupt. Try a forced quit. (command option escape)

Error executing CFC. Parameter index out of range (2 number of parameters, which is 1)

Hi,
My CFC component is defined as:
<cffunction name="updateNote" output="false" access="remote" returntype="void" >
     <cfargument name="notedetails" required="true" type="string" >
     <cfargument name="notename" required="true" type="string" />
     <cfquery name="qupdateNote" datasource="notes_db">
           UPDATE
               notes
           SET
               notes.notedetails=<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notedetails#">,
           WHERE
               notename="<CFQUERYPARAM CFSQLTYPE="CF_SQL_VARCHAR" VALUE="#ARGUMENTS.notename#">"
    </cfquery>
</cffunction>
In Flash builder when I test the operation I get this error:
"There was an error while invoking the operation. Check your server settings and try invoking the operation again.
Reason: Server error Unable to invoke CFC - Error Executing Database Query. Parameter index out of range (2 > number of parameters, which is 1)."
Im really quessing that this is something small but right now its causing me to pull my hair out of my head!! Argg. Tried a bunch of things but I know thik im stuck.
Help would be very very appreciated.
Thanks

Create test.cfm along these lines:
<cfset myObj = createObject("component", "dotted.path.to.cfc.file")>
<cfset myResult = myObj.myMethod(arg=value1, etc)>
<cfdump var="#myResult#">
Or, really, you could just browse to this:
http://your.domain/path/to/your.cfc?method=yourMethod&arg1=value1 [etc]
Although I dunno which of those two approachs will give you a better error message (indeed, it might be the same).
Try both.
Adam

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

Error Message "The document could not be saved. A number is out of range"

Hello to all,
I'm working on a G5/10.4.11/Illust CS3/Acrobat 9 and use to generate .pdfs from .ais by using "Save as pdf" function. Either with LowRes profile and HighRes profile. My pdfs are sent to PC users that use to post it them for changes. But when they need to save them, they get the message "The document could not be saved. A number is out of range".
I know there was a few subject about that but do you have a recent solution to give me to help avoiding this bug ?
Many thanks in advance !
Stekc

As a follow to the above, the problem was related to a file transfer. The PDFs in question were being transfered from a Unix platform to a Windows Server. The transfer was defaulting to ASCII or Text and not binary. Apparently this was never an issue with older versions of Adobe Reader. Once the transfer was switched to binary, Reader X was able to view the files with no missing pages. Something was being stripped from the file that Reader X just didn't like.

How to get the unoccupied material number in a number range

How to get the unoccupied material number in a number range.for example, I wang to get a number between 1500000 and 1599990 which is unoccupied as my material number to be created. Is ther any FM or codes?

Dear,
You can get this information from Tcode SNUM or you can access database table NRIV.

FM8 -- Acrobat7 Error: A number is out of range

When PDFing a FM8 doc, I got an Acrobat error message: "A number is out of range." Acrobat produced a PDF, but the first page was page Zero! and the Properties of the Acrobat doc were not accessible. Not good.
Searched and searched for answers, but didn't come up with anything.
The FM8 doc is very basic -- only three standard fonts, 10 pages long, nothing fancy. The only unusual thing (if you want to call it that) is that I imported the text (copied in) from a .txt file, which originated as a Word doc.
So, I thought... hmmm... save first as a .MIF, then back to a .FM and see if that helps.
It did.
I don't know much about .MIF files. It must have cleaned up some garbage brought over from Word. You brainiacks who frequent this Forum probably understand completely how the .MIF works its magic.
Anyway, if anyone else gets this error message, I thought I'd document my solution with the error message in the subject line.
From Smokey Northern California,
Karen

The file is corrupt. Get a new undamaged copy.
Mike

Range of number in numeric control

hi, im new to this program and im trying to generate a range of number (ex. 5.0 1.0 0.25 and 0.10) using a numeric control. can anyone please shed some light? thanks.

It is not entirely clear what you really want, but you could just create an array control showing 4 elements. For that, you would first drop an array container on the front panel, the drop a suitable numeric control inside it. Now resize the container (horizontally or vertically) to show as many elements as you want.
On the block diagram you would get a 1D array terminal.
Message Edited by altenbach on 04-08-2007 07:50 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
array.png ‏2 KB

Prefix Number range: Transport number range

Similar Messages

Maybe you are looking for