Prefix required for namespace error

When I try to import an XML schema into the TopLink workbench, I'm getting the following error:
0800 - Prefix required for namespace "http://www.ACORD.org/standards/PC_Surety/ACORD1.6.1/xml/".
Has anyone seen this before? Any help would be appreciated!
Thanks,
Greg Plummer

Hi Blaise,
Thanks for the reply. The schema I was trying to import was huge and it has come to my attnetion that it has been broken down into a set of more managable schemas. Now I'm getting a different error trying to import those smaller schemas, as follows:
(Error) Can not build schema 'http://www.w3.org/XML/1998/namespace' located at 'file:/C:/Temp/Pliq XML Schemas/FromJim/xml-ns.xsd'
I copied the xml-ns.xsd file to the directory that contains the schema I'm trying to import, but that made no difference. I also tried changing the schema to use an absolute path to xml-ns.xsd, but no luck with that either. Any thoughts???
Thanks, Greg

Similar Messages

  • ABAP proxy based on XSD with specific requirement for NAMESPACE

    Hi
    I'm using PI 7.11
    My scenario is an ABAP proxy from SAP backend to filereceiver. NO mapping.
    The SI is based on an XSD from our customer, which have a targetnamespace, so a namespace requirement of six chars namely "SBSFL1:nnn".
    When sending the message from our SAP backend - SAP ALWAYS ignore this targetnamespace SBSFL1 and replaces it with nr1:nnn. Why? When taken the same XSD into xmlspy and generating sample XML et works great all nodes/fields have a prefix of SBSFL1 ....
    Why is PI 7.11 ignoring this targetnamespace requirement. I was hoping this was possible to archive WITHOUT any XSLT mapping or other "tricks" in the MAPPING runtime (i want to avoid any mapping because of performance)
    Hope for som help, since this is a major issue
    Cheers and thx in advance

    > Why is PI 7.11 ignoring this targetnamespace requirement.
    Because there is no standard having a specific namespace prefix.
    It does not make any difference which namespace prefix is used.
    Unfortunatly some developers don't about the XML standards and expect a specific namespace prefix, like PIDX.
    Blame them
    Regards
    Stefan

  • Workflow for Idoc errors

    Hi,
    I am new to workflow, I got a requirement for idoc error handling in workflow.
    If the idocs fail a notification needs to be sent to an appropriate personnel. If it fails due to configuration or technical issue then the notification needs to go to the tech personnel ( A distribution list ) . If it is a data error then notification needs to go to functional personnel ( distribution list ).
    Here i have created a WF using Object IDOCAPPL. Please let me know how i can handle this condition and want some document on orginization structure.
    I have refered to documents in Saptechinical and Sdn.Plz let me have some other ideas and documents.
    thanks
    Arun.

    You can create a custom rule and inside that you can have your own condition and populate the users accordingly.
    Distribution list..you can create in SBWP itself.

  • Error: Error writing stream: Could not find prefix for namespace:

    Hi all,
    I am getting this error while doing topdownAssemble using WSA. The error seems as if the name space definitions do not have proper prefixs, but I have prefixes for all the name spaces.
    Any idea what else might be causing the problem ?
    Thanks,
    --venkat
    + java -jar /opt/oc4j_extended_101310/webservices/lib/wsa.jar -topDownAssemble -wsdl parlayx_third_party_call_service.wsdl -unwrapParameters false -className oracle.sdp.parlayx.ThirdPartyCallImpl -input classes -output gen -ear dist/tpcall.ear -mappingFileName src/ThirdPartyCallService-java-wsdl-mapping.xml -packageName oracle.sdp.parlayx -fetchWsdlImports true -debug
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_third_party_call_service.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_third_party_call_interface.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_common_faults.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_third_party_call_service.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_third_party_call_interface.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_common_faults.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_third_party_call_interface.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_common_faults.wsdl
    FINE: OWS-11015 Trying to Access Resource at URL: file:/home/vayyagar/IdeaProjects/ParlayX/parlayx_common_faults.wsdl
    Error: Error writing stream: Could not find prefix for namespace: http://www.csapi.org/wsdl/parlayx/common/v2_0/faults
    Error writing stream: Could not find prefix for namespace: http://www.csapi.org/wsdl/parlayx/common/v2_0/faults: java.io.IOException: Could not find prefix for namespace: http://www.csapi.org/wsdl/parlayx/common/v2_0/faults
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeAttValFromQName(WSDLWriterImpl.java:660)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeFault(WSDLWriterImpl.java:577)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeOperation(WSDLWriterImpl.java:563)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writePortType(WSDLWriterImpl.java:422)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeDefinition(WSDLWriterImpl.java:186)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeWSDL(WSDLWriterImpl.java:93)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeWSDL(WSDLWriterImpl.java:83)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.writeOutWSDL(WSDLImportLocalizer.java:637)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.writeOutTo(WSDLImportLocalizer.java:568)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.localize(WSDLImportLocalizer.java:278)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.localize(WSDLImportLocalizer.java:162)
    at oracle.j2ee.ws.tools.wsa.Assembler.topDownAssemble(Assembler.java:828)
    at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:320)
    at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:169)
    at oracle.j2ee.ws.tools.wsa.Main.mainNoSystemExit(Main.java:83)
    at oracle.j2ee.ws.tools.wsa.Main.main(Main.java:48)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeWSDL(WSDLWriterImpl.java:95)
    at oracle.j2ee.ws.wsdl.xml.WSDLWriterImpl.writeWSDL(WSDLWriterImpl.java:83)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.writeOutWSDL(WSDLImportLocalizer.java:637)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.writeOutTo(WSDLImportLocalizer.java:568)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.localize(WSDLImportLocalizer.java:278)
    at oracle.j2ee.ws.common.wsdl.WSDLImportLocalizer.localize(WSDLImportLocalizer.java:162)
    at oracle.j2ee.ws.tools.wsa.Assembler.topDownAssemble(Assembler.java:828)
    at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:320)
    at oracle.j2ee.ws.tools.wsa.cli.Processor.execute(Processor.java:169)
    at oracle.j2ee.ws.tools.wsa.Main.mainNoSystemExit(Main.java:83)
    at oracle.j2ee.ws.tools.wsa.Main.main(Main.java:48)

    HI,
    Seems known issue. I would suggest to raise an Service Request with the test case.
    GD,
    Ashish

  • * is missing for required field in error message

    Hi all,
    I am using JDeveloper 11.1.1.2 with ADF BC. I have a simple form in a jspx with some fields for user to input.
    The page contains 3 mandatory fields (simply set required=true): Surname, Name and Title. Where Surename and Name are inputText, and Title is a Select One Choice with List Of Value defined in VO.
    If user submit data without anything in the required fields, an error message will popup. But the content of the error message is not quite correct!
    All the required inputText has a prefix: *, but Select One Choice do not have a leading *.
    Error
    Messages for this page are listed below.
      * Surname  You must enter a value!
      * Name     You must enter a value!
      Title      You must enter a value! is there anyway to add a * to the error message for Select One Choice? or remove all the *? It looks very confusing.
    Thanks in advanced,
    Samson Fu

    not sure,
    but try to set the ShowRequired for this LOV in property inspector to true

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

    Hello all,
    I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
    My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
    The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
    But in this case, when I run it, it shows the error that I have indicated in the subject line.
    If you need more details about my project to identify the problem, please let me know.
    Thanks in advance.
    Solved!
    Go to Solution.

    -Please go through pattern matching example which comes along with labview fiirst
    Go to labview Help>>Find Examples and you can search for example.
    -You have create template with angle range and what type of pattern matching you want use.
    -For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
    Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • Error message on window 7 for install iTune and iCloud!!!"There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

    Hi,
    I just try to install the setup download from apple website for iTune and iCloud.
    During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
    Anyone can help on this??????
    Thanks.
    Justin

    I have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater.  The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.

  • Error while Check-in DC's on NWDI: No Prefix found for DC

    Hi,
    I receive the following error when I try to check-in a CAF DC creation activity on the DTR.
    FAILED: No prefix found for development component "vendorname/name_A/caf/dictionary".
    Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
    No prefix found for development component "vendorname/name_A/caf/ejbmodule".
    Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
    No prefix found for development component "vendorname/name_A/caf/ear".
    Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
    No prefix found for development component "vendorname/name_A/caf/permissions".
    Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
    No prefix found for development component "vendorname/name_A/caf/metadata".
    Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
    Project "vendorname.name_A.caf": No prefix found for table file "XAP_COM_MOD_COMP_S".
    Try the default table prefix "XAP", or contact your SLD administrators for appropriate DB object prefix (Restart IDE after reconfiguring SLD).;
    Project "vendorname.name_A.caf": No prefix found for table file "XAP_COM_MOD_COMP_T".
    Try the default table prefix "XAP", or contact your SLD administrators for appropriate DB object prefix (Restart IDE after reconfiguring SLD).
    In NWDS If I create a new DC the name prefix field is disabled.
    On the SLD I have created the name prefix --> "vendorname/name_A" and restarted the SLD.
    I am using NWDS 7.1 SP05.
    Do I miss any configuration steps?
    Thanks,
    Regards,
    Yasar

    Hi,
    The issue is solved.
    The name server for the NWDI System was not configured on the SLD under Technical Landscapes. After defining the NWDI System and configuring the name server, I restarted the SLD Server and updated the CMS.
    Now Check - In and Check -Out of CAF DC's are working fine. If I define a new DC the name prefix is also editable and NWDS provides me my defined name prefixes in the name prefix combobox.
    Regards,
    Yasar

  • I am trying to update my iPhone software but to do so I needed to update iTunes.  When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not

    I am trying to update my iPhone software but to do so I needed to update iTunes.  When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
    If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
    http://www.apple.com/itunes/
    If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
    If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
    1. Open the control panel
    2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
    3. Navigate to "Apple Software Update" in the list and click on it
    4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
    Once you repair this, try running iTunes and the update again.
    Fingers crossed!

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem.

    I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Apple software update 2.1.3 is giving error  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."

    Apple Software Update 2.1.3.127 will not install i keep getting the error
    “There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personnel package vendor. ”
    i have tried to uninstall itunes and reinstall and i can not get it to install

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for