Preloading all images from xml

Well, i've been at this for quite a while now.
I made a small photoalbum and i want all the images to be
preloaded before the movie begins. I've been struggling with this
for almost 2days.
The images load from an xml. How can I preload all the images
and then start the movie?
Thanks a lot.
This is the code for the xml:

Well, I'm kinda guessing at what's in your xml.
Let's say its similar to this;
<document>
<images>
<image>myimage.jpg</image>
<image>myimage2.jpg</image>
</images>
</document>
Then I think the following would work. I haven't tested it,
but it should work in principle based on things I've done in the
past. If you have a fixed number of holder clips (ie. the xml will
always contain 5 images for example) then you can approach things
this way. Otherwise you'd need the code to create empty holderclips
for loading into as well, once the number of images has been
counted.

Similar Messages

  • How to retrieve image from XML  file

    Hi All,
    I am new to XML. So any best guidance is appreciated.
    The application requirement is to display image retrived from uploaded xml file in file upload section of our application. And store that image in database.
    In my XML file , images & strings & numbers & booleans are there . I am able to save everything in database except images .
    I am using JSF, Seam & Hibernate combination. In my Hibernate entity class i took BLOB datatype for image.
    I am using following tags in my Xhtml file to display image
    <s:graphicImage value="#{hibernateentitybean.picBlobtype}" height="200" width="200">
    <s:transformImageSize width="200" height="200" />
    <s:transformImageType contentType="image/jpeg"/>
    But image is not displayed in Xhtml file
    I am using org.w3c.dom.Document for retrieving node name & corresponding value in that node in XML file.
    I am getting code like below for Image when i am logging all values from XML files in my bean class .
    x0lGQRQAAAABAAAAAAAAAFJHAQARAAAAVwBhAHQAZQByACAAbABpAGwAaQBlAHMALgBqAHAAZwAAAP/Y/+AAEEpGSUYAAQIBAGAAYAAA/+0YLl
    I want to convert this value to image. So i can convert image to bytes and store in BLOB.
    Can anyone guide me ? or any other approach .
    Thanks in advance for any reply.
    Regards,
    Naresh

    Dan_Koldyr wrote:
    agree, it's really odd. Just reread OP and it says:
    NareshDharmiVatsal  wrote:
    want to convert this value to image. In any case it doesn't get worth then another single code line:
    final String cdata = "x0lGQRQAAAABAAAAAAAAAFJHAQARAAAAVwBhAHQAZQByACAAbABpAGwAaQBlAHMALgBqAHAAZwAAAP/Y/+AAEEpGSUYAAQIBAGAAYAAA/+0YLl";
    final sun.misc.BASE64Decoder decoder = new sun.misc.BASE64Decoder();
    final byte[] data = decoder.decodeBuffer(cdata);
    Blob blob = new SerialBlob(data);//or what ever other DB-specific blob implementaiton Did i answered original question? Any more comments to my first replay?I can comment on this latest code. The package sun.misc is private to Sun (Oracle now of course). It is undocumented and may change or be removed altogether in a future release. There is a good free open source Base64 decoder in the Jakarta Commons Codec library.

  • How to get all images from folder in c#?

    I am trying to get all images from folder. But it is not executing from following:
     string path=@"C:\wamp\www\fileupload\user_data";
                string[] filePaths = Directory.GetFiles(path,".jpg");
                for (int i = 0; i < filePaths.Length; i++)
                    dataGridImage.Controls.Add(filePaths[i]);
    Please give me the correct solution.

    How to display all images from folder in picturebox in c#?
    private void Form1_Load(object sender, EventArgs e)
    string[] files = Directory.GetFiles(Form1.programdir + "\\card_images", "*", SearchOption.TopDirectoryOnly);
    foreach (var filename in files)
    Bitmap bmp = null;
    try
    bmp = new Bitmap(filename);
    catch (Exception e)
    // remove this if you don't want to see the exception message
    MessageBox.Show(e.Message);
    continue;
    var card = new PictureBox();
    card.BackgroundImage = bmp;
    card.Padding = new Padding(0);
    card.BackgroundImageLayout = ImageLayout.Stretch;
    card.MouseDown += new MouseEventHandler(card_click);
    card.Size = new Size((int)(this.ClientSize.Width / 2) - 15, images.Height);
    images.Controls.Add(card);
    Free .NET Barcode Generator & Scanner supporting over 40 kinds of 1D & 2D symbologies.

  • I had all photos on a Windows desktop.  Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive.  When I go to import them into LR on the Mac, they are all locked.  Help, please.  Thanks

    I had all photos on a Windows desktop.  Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive.  When I go to import them into LR on the mac, they are all locked.  Help, please!

    "I plugged the external into the Mac and moved a folder of images onto the desktop.  It looks like it went from read only to not locked.  Is this possible?"
    Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
    I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • Recently i lost my laptop, how i want to upload all image from my iphone back to my new laptop?

    recently i lost my laptop, how i want to upload all image from my iphone back to my new laptop?

    importing pics from iphone to computer http://support.apple.com/kb/HT4083

  • Can I preload all images in LightRoom Mobile?

    I love LightRoom Mobile so far. Is there a way to "preload" all images so that I can view/edit locally without being connected?
    I tried it on a trip and didn't know that I have to go into each image to get it to download to the iPad. The thumbnails are there, but tapping on an image brings up a lowres until I get connected to wifi.
    I bought a 64GB iPad mini knowing that these images will take up space in addition to the thumbnails.
    Thanks,
    Michael

    Hi,
    You can try the "Enable offline editing" for the collection on the device.
    Thanks,
    Ignacio

  • Best way to extract all images from Messages?

    My iPad freaked out earlier today and unfortunately I had to do a recovery and restore (from iCloud backup).  I say unfortunately because I was 90% certain I was not backing up photos/video (and there was no way to check before doing the restore).  And indeed I had photo/video backup turned off.
    I'm mostly back to normal now, except for all the lost photos/videos.  I've gone through some of Messages to Save ones I sent there. 
    What is the best way to extract all images from past Messages so I don't have to tediously load earlier messages?   I understand there are some programs that allow one to go through a local backup and go through messages.  But for this I suppose I'd first need to make a local backup of everything, no?  Are those programs able to extract just images I've sent or do they grab everything (i.e. images others have sent me?)
    Related, before I did the initial restore could I have easily retrieved the photos/images on the device through some third-party solution?
    Lastly, and semi-off topic.. What determines the image name for an image in Messages?   For example, I Copied a photo someone sent me via Messages and Pasted it three times back to her (all at the same time).   The image filenames are IMG_6447.jpg,  IMG_4820.jpg, IMG_0291.jpg.  

    Thanks Kirby.  I utilize Aperture 3 by reference instead of a compiled library.  So I have individual folder/projects stored on my laptop.  By exporting as a library, does Aperture bring these folders and related images "with it"?
    What I don't want to lose is any post processing I do in the field which creates separate versions and/or .PSD files.
    Thanks for your continued assistance.
    Chris

  • Can i display all images from databases with adf jsp

    hi
    I want to display all images from the databases whit adf bussines components, because with the sample on http://www.oracle.com/technology/training/products/intermedia/index.html page, i only can display 10 images. i'd lije to know if i can to search in the databases by the id of the image.
    this is the code:
    %@ taglib uri="http://xmlns.oracle.com/adf/ui/jsp/adftags" prefix="adf"%>
    <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c"%>
    <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
    <%@ page contentType="text/html;charset=windows-1252"%>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
    <title>untitled</title>
    </head>
    <body>
    <html:errors/>
    <table border="1" width="100%">
    <tr>
    <th> </th>
    <th>
    <c:out value="${bindings.ImagenView1.labels['Id']}"/>
    </th>
    <th>
    <c:out value="${bindings.ImagenView1.labels['Descripcion']}"/>
    </th>
    <th>
    <c:out value="${bindings.ImagenView1.labels['Image']}"/>
    </th>
    </tr>
    <c:forEach var="Row" items="${bindings.ImagenView1.rangeSet}">
    <tr>
    <td>
    <c:out value="${Row.currencyString}"/>
    </td>
    <td>
    <c:out value="${Row['Id']}"/> 
    </td>
    <td>
    <adf:render model="Row.Image"/>
    </td>
    <td>
    <c:out value="${Row['Image']}"/> 
    </td>
    </tr>
    </c:forEach>
    </table>
    </body>
    </html>

    I think you want the interMedia JSP tag library...
    http://www.oracle.com/technology/software/products/intermedia/htdocs/descriptions/tag_library.html
    Larry

  • Won't download all images from my sony camera...only 6 out 0f 170, says rest of them are "unreadable j.peg format". Help!

    Help!  My Mac will not download all images from my Sony digital camera...well, it downloaded 6 out of 170, then said "unreadable j.peg format". This is the second time I have had this problem with this camera. Up to this second time, I have not had a problem with downloading. Now when I plug the camera back in in, it shows empty frames of pix  on Mac screen, but pictures are still on the camera. Any suggestions?

    See if you can use Image Capture to upload your photos to a folder on the Desktop.  Once you have them off the memory card reformat the card using the camera, take some photos and try again.
    OT

  • Remove ALL Images from PDF Export?

    I'd like to remove ALL images from a PDF export (Indesign CS6), with the intention of having the smallest file size possible for review. All the images are Photoshop PSDs.
    I have created a PDF Preset (PDF 1.7) that omits EPS, PDF and Bitmap.
    That covers any PSDs that contain opaque backgrounds, i.e. are considered to be non-transparent. However, any PSDs that do NOT contain such backgrounds still appear in the exported PDF. I assume they are NOT considered to be Bitmaps?!?
    I've gone for maximal compression of images (in the Preset) also just to see how small I can get the file, but it's still over a meg, and I'd really like even smaller. I live in a rural part of England where net access is painfully slow, and even a few meg of data takes far too long to upload, not to mention the constant drop-outs. Consider further that my document is likely to grow by several orders of magnitude and hopefully you can see why I'd like to sort this issue out as soon as possible.
    I've not done any scripting but assume it would be trivial to hide images with a script. However, I'm not sure how such a script might know how to make visible only the images that were previously hidden by the script. Obviously I would not wish to unhide images that must stay hidden. Maybe some form of image/object tagging, if that's even possible in this product, i.e. tag them "temp hide" on first pass of the script, and so forth.
    Any suggestions much appreciated.
    Regards,
    James

    @James – to mark the container frames of the nonprinting images by a fill color, you could add the following lines of code in the for loop:
    allGraphicsArray[n].nonprinting = true;
    //The parent of the graphic is the container that holds it.
    //We could use it to fill it with a tint of e.g. 20% of black:
    allGraphicsArray[n].parent.fillColor = "Black";
    allGraphicsArray[n].parent.fillTint = 20;
    But this approach will add a new problem for images, that only use a portion of the holding graphic frame. Or are only partly visible due to a clipping path or a clipping mask or totally transparent areas due to transparent pixels.
    Already colored backgrounds will be recolored…
    @Sandee – I see the advantage of the PostScript to Distiller way in this situation, but there are two disadvantages:
    1. Live transparency will be flattened (could be no issue in this use case, but you never know).
    2. The gray area with the big X will be applied also to parts of the images where no pixels are present (transparent pixels in PhotoShop or TIFF files).
    To work around all these issues we need a more complex script that is building a  path object around the transparent parts of an image or using an applied clipping path for that purpose and fill that with a gray tint (and maybe with an X).
    Here some screen shots to illustrate the problems (with or without using PostScript/Distiller):
    1. Original set up:
    One placed PhotoShop file with transparency stacked upon the text frame.
    The image inside its holding frame is selected.
    The visibility of one of its layers depicting a second chair on the left side is switched off.
    2. The same setup in a different view:
    3. After running the script with the two additional lines of code:
    Using the PostScript method would do nearly the same plus adding a cross using the  area of the selected image.
    Uwe

  • How do I erase all images from a card in the Cannon Rebel t3

    how do I erase all images from a card in the Cannon Rebel t3

    Hello debrusso,
    I would just like to give some quick advice that you all may already know but I was just told this countless of times that I thought you all would like to know. \
    I have been told by numerous of photography professors that it is always best to try to format your camera every now and then. Because your memory card is not really deleting the photos but rather hiding it somewhere. This is a problem because it still takes space from your card. The solution to this is to FORMAT because it is one of the safest ways for your camera to erase images. It also sets up properly for your camera like new. But make sure to save your images before doing formatting. I have had many silly accidents this way. Lol.

  • Deleting all images from iPhone (ios 6.1.4)

    I am currently trying to delete all the images from my phone to clear space for other applications.
    (Transferring them to my computer was an excruciating process and actually forced me to purchase an external program, but I digress.)
    I can't delete photos at all in the iPhone photos app. Going edit > select photo > delete causes the Photos app to crash every time. This happens whether I have selected one or more than one photos. I have restarted the app (double tap home button and delete the app from the fold-up menu) several times, but the problem recurs when I try again. In any case, I have over 37,000 photos so this would be a horribly inefficient way to do it.
    Key things to note
    1) I only have Windows 7 on my PC. Therefore, I cannot use any mac related programs like iPhoto to mass delete images.
    2) Windows explorer is unable to consistently recognize my iPhone. I have gone into device manager many times and reinstalled the driver, and attempted other fixes I found off of Google, but alas for past several months I have not been able to get it to recognize the iPhone as a camera or as anything at all. As of recent weeks, the iPhone does not even show up in the list of external devices plugged into the computer regardless of driver reinstallation, and only my external HDD appears.
    3) Back in the past when the Autoplay window did show up, there was never an option to import pictures and videos- furthermore, selecting the sole 'open device to view files' simply showed me a series of blank folders in my iPhone.
    At that time, I already had had my settings set to show hidden files and folders, so I was mystified that windows explorer insisted no files were present in the folders when there were quite obviously photos on my phone.
    I am unable to import photos using windows explorer. As such, this fix cannot be used: http://support.apple.com/kb/HT4083
    I am very disappointed at how nonfunctional the interaction between Windows and Apple devices has become. In the past, I was able to import pictures from my iphone 4S this same PC using windows explorer's autoplay popup, and it is sad that this is unsupported with the  iPhone 5.
    4) iTunes, which is on the same computer, does recognize the iPhone. I can sync perfectly fine.
    5) Very few of the images have been imported from my computer. Most of them were taken or saved on the phone itself, so removing sync of photos from the sync process doesn't do anything.
    6) There are no photos on Photo Stream or Photo Library, because I only recently found out about these features (1-2 days ago researching solutions). All 37,000+ photos are in Camera roll. This means that I cannot turn off Photo stream and have the pictures disappear like in this fix. https://discussions.apple.com/thread/5099543?start=0&tstart=0
    Given all of this information and my limitation in options, how do I delete all of the images on my phone efficiently?

    Incidentally, restoring the phone to factory settings is not a viable solution because I have a lot of apps, notes and other material which I do not wish to lose and would not be stored in a backup.

  • CS6 won't open all images from Windows Explorer

    Hi!
    Today a colleague of mine encountered a strange behaviour with Photoshop CS6 64bit on a Win7-PC (also 64bit), which I could reproduce on a second machine.
    Highlighting severeal jpg-images in a folder and hitting the Enter-key opens
    all images in Photoshop, when Photoshop wasn't running
    only some images (1 - 4 images out of 5) randomly, when Photoshop was already running
    The same effect happens when I use the "Open with..."-command from Windows Explorer on the images.
    Does anyone know this issue?
    Regards
    Dieter

    Normal behavior. Windows only allows a given number of files to be handed over via DDE and that's what happens when a process is already active. When you do this with no program open, it simply blindly fires a standard command with only one file as an argument, but does so for every single file. That's why it works then. Nothing you can change. It's a limitation in Windows itself combined with the fact that only one PS process can be active....
    Mylenium

  • Need to Export All Images from Aperture to Photoshop.  Can anyone help?

    I'm new to Mac. Just got my iMac in January. I wanted to buy the Mac version of Photoshop Elements 8, but the Apple salesperson convinced me that Aperture 2 would be much easier. After three months, I've discovered that Aperture is just not for me. I just purchased and installed Photoshop Elements 8 for Mac today. I would like to move all of my images from Aperture to Photoshop and delete Aperture from my computer. I cannot figure out how to do this. Whenever I try to export, the Aperture "library" appears as a big block that won't open or prompt for subfolders. Please help!

    Pvonk has good advice. I just want to make sure you understand the Aperture has a Master and at least one Version of each image file. The Master is the original -- never touched. The Version is at first a copy of the Master, but as soon as you make any changes it holds those changes. So you have to decide whether you want to export the Masters, the Versions, or both (which you'll have to do separately, afaik). Aperture gives you the choice. Click "Photos" in the Library tab of the Inspector, then select all, then "File>>Export". If you want to maintain your groupings (e.g.: Projects), you will probably have to select the images in each group and export them as a unique set.
    Note that Aperture is a very powerful image database (pros refer to this as "Digital Asset Management") in addition to (w. v. 3) being a very powerful digital photograph development lab. Photoshop Elements does none of the former, and a very different kind of job than the latter.

Maybe you are looking for