Premiere cs6 does not see correct images in media browser

Hi Folks,
I'm working on a project in CS6 Premiere (On an iMac with Mavericks running) and I cannot get the Media Browser to correctly see/import the still images (JPGs) I want to use. Instead, it sees all 8 images as the same image, though with different file names. I've reopened Premiere a few times, closed and opened Bridge a few times, renamed the files (Premiere still sees the original file names). Is it a matter of clearing the cache? If so, can someone explain that process?
Thanks for your help!

Thanks Ann,
I tried that but Premiere is still seeing its original view of the images (all thumbnails are the same) - the newly saved image doesn't even show up in the Media Browser.

Similar Messages

Premiere cs6 does not recognize USB3 intensity shuttle?

I recently purchased Adobe premiere cs6 and a blackmagic intensity shuttle USB3 for windows. I have succesfully captured video from a deck using the media express software but premiere does not see the blackmagic device. Any ideas?

I recently installed the Intensity USB 3.0 on Premiere Pro CS6.0 windows 64 bit on an Intel Motherboard.
The capture device is installed and works fine and captures ok with the blackmagic capture utilities.
When capturing using HDMI 1080i 50 resolution on Premiere it stops after 1-2 secs.
Tried using the Video for windows capture it works fine there too but does not seem to work with Premiere CS6.
Any advise help suggestion

Premiere CS6 does not remember some settings when saving custom export presets.

When I save a custom export preset in the export window, some settings are not remembered, and I need to change them every time again and again! The settings so far I found to not be saved are:
Key frame every ... frames
Limit data rate to ...

Interesting...
When I create and save an a H.264 QT preset
using the Export Settings dialog from within Premiere,
it does not save the key frame interval or max bitrate.
However, when I create a H.264 QT preset from within
Media Encoder and save... the missing settings are saved
and can be recalled from within the Premiere Export Settings dialog.
EDIT:
Re-tested this a bit more, and now the kf interval & max bitrate are
being saved with the presets created in Premiere Export Settings dialog.
Odd... my first 2 tries didn't take?

Sony VG-10 - Premiere CS6 does NOT seem to like it

Been working with CS6 for a while now and footage from both a Sony NX5U and an AX2000. Absolutely NO issues whatsoever. But I recently got a VG-10 as I had been doing some stuff with my Canon 7D and LOVE the DLSR look. The VG10 footage is gorgeous but I've run into an issue; Premiere does NOT seem to like the m2ts files from the VG10 (NO ISSUES WITH M2TS FROM OTHER CAMERAS). I can edit it for a little while, maybe half hour, then the timeline starts freezing. To be more accurate, the VIDEO freezes. Sound plays fine but the picture lags. Takes a while to refresh. I thought it might be the computer so I tried it on my other edit suite and got the same thing. The only solution I've found is to convert the VG10 footage to MP4 files and then there's no problems but this is a pain in the ***.
Anyone had this issue and found a better solution than converting all the VG10 footage
BTW the computer are both Win7 64 bit, both have 24GB Corsair memory and GeForce GTX260 video cards.

That's a common misconception that one needs to "fix" the clips BEFORE importing to Premiere. Actually does more harm than good for some users.
I rented an AX-2000 a couple weeks ago to shoot 6 dance recitals of 2.5 hours each. To get the clips into the CS6 system, I simply copied the entire contents of each SDHC card to unique folders on my video hard drive, then used MEDIA BROWSER in Premiere CS6 to import. Media Browser simply showed me ONE long clip in the bin and when I moved it to the timeline, again one long seamless clip, no glitches at the "invisible" seams or anything. Nothing could be simpler. Keeps perfect sync with the other camera, which was recorded as ProRes using Ninja 2.
That's the beauty of Media Browser, that it looks at the metadata and knows how to properly handle spanned clips properly behind the scenes, so that you don't have to worry or do extra work. Please try this workflow and see if it fixes the issue.
Thanks
Jeff Pulera
Safe Harbor Computers

CS6 does not see my GPU. It did and now not.

Hi CS6 stopped seeing my GPU. I noticed the problem when trying to do one of Deke's 3D tutes on on lynda.com. So I was able to do most things till I tried 3D. In cs5.1 can see it and allows my to activate it. I recently uninstalled CS5.1. I reinstalled it to see if that would help and it runs extremely slow now and often spins the pinwheel at any little thing.
This is what I see now. See how the GPU is greyed out?
I reinstalled CS5.1 to check what up and checked the prerences there and the GPU is availible and defaulted to my previous settings. These are the CS5.1 settings. See how the GPU is not greyed out.
CS5.1 runs even slower than before though. I have ungraded from an old white mac book to a new mac book pro and beefed up the RAM and now have the following specs to work with
If it helps.. I am now also running into an error message that bridge can no read the cashe, too.
Thanks for any help you can lend, Uhane,
(Merideth, Are you still around? Wanted to thanks you again for your help last time)

Hello and thanks for responding.
<quote>
CS5 didn't do as much error checking, or make as heavy a usage of the GPU.
CS6 does more error checking (because we found GPUs crashing Photoshop too often), and tries to use the GPU more often.<end quote>
PS6 does not crash perse. It will report as a crash after I have com/Q somethimes, even without open docs but that is another bug. This one has to do with the GPU becoming greyed out in preferences and unavalable after having been available. This problem is intermitent. It seems it is not a problem anyone else is reporting.
<quote>
If the GPU is allowed for it's basic version and feature set, then there are a couple possibilities: if the GPU returned an error when it shouldn't, or if Photoshop crashed during a call to the GPU driver - then it will be disabled (because now we know it can't be trusted).<endquote>
The GPU greyout is either all in or all out. I can do 3D just fine when it's operable. The screen shots above was for the CS5.1 comparason, showing it enabled and active.
<quote>
Also, 256Meg of VRAM is too little to use the 3D features in Photoshop CS6. So the 3D features will be disabled in CS6 even if the GPU is enabled for basic display use.
Was the GPU ever enabled in Photoshop CS6? Does your System Info log show any errors for the GPU? (probably does, otherwise you would have the GPU model and driver version listed in prefs)<endquote>
I have no problem with 3D or the timeline video funtions when the GPU is enabled. No system log errors that I can recognize. Perhaps you could direct me to where and for what to look for there? I have the NVIDIA GeForce 320M which is standard and should be more than adequate.

Lightroom CC Import sees CF Card in reader but does not see any images, cannot import anything

I have installed Lightroom CC. It seems to work but if I connect a card reader with a CF card, while Lightroom sees the card, it sees no images. I have to copy the files to a hard disk and import from there. How do I fix this annoying problem?

Hi drchevalier,
You mean, you are able to import those files, if moved to hard drive but not able to view them when importing directly from the CF Card? Please attach a screenshot.
If so, might be an issue with the card. Did you try reformatting the card in the camera itself and check? If not, might want to try that.
Also, make sure your camera is in the Camera Raw plug-in | Supported cameras list. Else, you might not see it in Lr.
~ Arpit
EDIT: Sorry, did not see your reply. Glad to hear that the issue got resolved.

Updated Windows to 8.1 and now Premiere Elements does not see my Panasonic video camera as source

Is anyone else having issues due to the updated Windows 8.1? I have a panasonic digital video mini casset camera that worked fine using a USB cable to upload video. Now the program will not see the camera as a source. Using a firewire is not an option and was not an issue in the past.

>new to premier
The Tutorial Links Page http://forums.adobe.com/thread/1275830 may also help
Plus...
Premiere Elements FAQ List (2 pages of FAQ as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_faq?view=all
Premiere Elements TIPS List (6 pages of Tips as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_tips?view=all

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Animated Gif Image does not render correctly on screen

I have added animated gif image to the scene it does not render correctely.it shakes on the screen. plz give me any suggestion
i use following code
Image logo= new Image(getClass().getResourceAsStream("images/image.gif"));
logoLabel.setGraphic(new ImageView(logo));

Hello user,
I think gif are rendered smoothly.
Are you sure you are not making many object of same images everytime?
Thanks.
Narayan

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Warp Stabilizer in CS6 does not work at all

When using the CS6 Premiere Pro Warp stabilizer it starts to analyze but doesn't start to convert after it has finished analyzing.
- Add the Warp Stabilizer
- Blue bar over picture shows up "Analyzing in Background (Part1 of 2)
- Prozess finishes but nothing happens (Source does not get corrected, orange bar never shows up)
- Another blue bar shows "Click Analyze to begin"
When pressing Analyze the process starts over again without any result.
The used footage is some mxf from a Canon C300
The used PC gots 8 cores, 32GB Memory
Update:
When using a different Clip, or if i shorten the problematic clip, it seems to work now
Info to problematic clip:
File Path: xxx.MXF
Type: XDCAM-HD Movie
File Size: 44.5 MB
Image Size: 1920 x 1080
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Mono
Project Audio Format: 48000 Hz - 32 bit floating point - Mono
Total Duration: 00:00:07:05
Pixel Aspect Ratio: 1.0
Compression Type: MPEG 4:2:2

I could not help laughing at Jim's remark. I remember showing my 20 minute video of our trip to Italy to my brothers way back in 2002. In fact, it was my first Premiere project. I had the sense to cut it way down from 20 one hour tapes to 20 minutes. My oldest brother may have thought he was being a little insulting with his remark, but I was overjoyed. He said "It looks like a PBS travelogue." That was, of course, exactly what I was going for with the video and the voiceover.
In any case, I was able to use Warp Stabilizer this weekend on some footage of a children's birthday party. I can't show the results because of the subject matter. Not that they were doing anything wrong other than savagely beating a poor Super Mario Brother's pinata, but I don't have a release for them all.
I was a bit surprised at how long it took. I have a state of the art PC, and apparently the GPU doesn't help. I liked the results, but I sure would like to know what resources the effect utilizes. This is a screenshot of what it looked like about two minutes into the 11 minute process (the effect window estimated 8 minutes) for stabilizing a 60 second video (1800 frames). I think maybe I will start another thread to inquire about this. The CPU wasn't even breathing hard, the hard drives I am using for cache are in RAID0 - so should be reasonably fast. Hmmm. I wonder?

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

Premiere cs6 does not see correct images in media browser

Similar Messages

Maybe you are looking for